Portege R600 - don't start 'Stand by Modus '.

Similar Questions

• Portege R600 wake 'making Hibernate'

  Hello

  After "don't start stand of Modus", now we have the same problem with the Hibernate mode.
  After 45 minutes in battery operation, the R600 go for hibernation (hibernation is sought, in this doesn´t mode it needs battery power).

  Now, the Portege is unbootable.
  We insist a few seconds button / stop to turn off the portege.
  Then we can start normally, but all the changes that have been stored in the mode hibernation has been lost.

  Is there another choice, that we allow to to wake up the Portege from hibernation mode?

  Thanks in advance!

  Kind regards
  Kinzius

  > after "don't start stand of Modus", now we have the same problem with the Hibernate mode.
  Seems that you talk on this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=52993

  Such and similar hibernation problems have been discussed many times in different forums.
  As far as I know in most cases the update of the BIOS helped.

  Please check if this will help you!

• Portege R600-10 q - DVD drive open / not work after the start of Vista

  Hi all

  Its my first post here =). I just bought a new Portege R600-10 q (PPR61E) and I have a problem. The DVD player does not open / works after Vista started... it works very well, or at least opens / orange light turned on, before the page of connection, but after that nothing.

  I have done't the thing of high-low values regedit to see if it works, but still nothing.

  The device does not appear in Device Manager, so I can't remove and reinstall.
  I did all possible updates to toshiba and MS, nothing helps.

  Can someone point me in the right direction?

  Thanks in advance.

  Steve

  Hello Steve

  I don't know what you've done in the past, but I would like to know if everything works with the factory settings.
  Have you tried to install Vista using Toshiba recovery image?

• Portege R600-12Z long delay of start & does not recognize DVD dirve

  I have been using my Portege R600 running windows XP for about 14 months now and recently FOUND that he began to take 1 to 2 minute wait before starting the sequence start or resumption after hibernation. Now, I have discovered that the DVD drive (5100 DVD - RW supermulti drive) does not work: in the Device Manager it shows as unable to start; If I try to boot from the drive of CD/DVD (F8 at first upward, or the definition of the boot priority) it does not take into account the CD and eventually get to the start of the HARD drive in any case. At the same time, the reader is actually superimposed a disc (it will open and close and will try to read any disc inserted). I've updated the bios (3.20) and all the drivers concerned I can find (although none seems to be specific for this drive). Any suggestions would be greatly appreciated.

  I should also mention that this replaced R600 actually an another R600 (one of the earlier and more fragile versions) on which I had exactly the same problem after about 10 months. I just unluckly, or is this a weakness of the R600 line?

  PMR thanks for your comments.

• Portege R600-4201 - are there USB sleep & charage available?

  There may be a setting somewhere that I missed, but when the device is OFF, no USB port is available to load another element.

  Thank you!

  Hello!

  Yes, normally the Portege R600 supports USB Sleep & Charge:

  This feature is available on the USB port which is marked with a lightning symbol. Additionally, make sure that it is enabled and you can check it using Toshiba USB Sleep and Charge Utility (start > all programs > Toshiba > utilities > USB Sleep and fresh).

  And don t forget that the machine must be compatible with the USB specification.

  Also, check the user manual! You will find lots of information on this feature.

• Portege R600-13Z - Toshiba utility SMS - slow / stop when the SIM is in!

  Hello

  Portege R600-13Z running XP Pro.

  Recently updated the firmware and the Wireless Manager to try to get 3g / GPRS comms to work at all. Updated worked a treat and have now great comms.

  Utility of SMS does not work too well if. Very, very slow or crashes.

  Wierdness: out the SIM card to use the phone to send a few texts and with the SIM on SMS utility works very well (!) starts, allows composition, everything except the real /sending/ of the text, which is of course not possible because the SIM card is somewhere else.

  Anyone encountered this problem, and is there a solution?

  Thank you very much

  Evan

  null

  > took out the SIM card to use the phone to send a few texts and with the card SIM SMS utility works great
  If you noticed delays in using DMD utility only with the inserted SIM card?

  Hmm I m not very well why this happens, but I know it s not recommended to insert the SIM card if the system is already running.
  You must shut down the laptop, must insert the SIM card and then you should power the device in place.
  Then you could test this once more.

• Portege R600 - where can I find the order of installation on Vista x 64?

  Hello

  I'll try to find a document that we'll know what order I should install my Portege R600 drivers and applications, there was one but I can't find it anywhere.

  Any help would be appreciated.

  Regards, Richard.

  Hello

  There is no special installation instruction details, but if you want to install the 64 bit Vista drivers then I recommend you start with the common as drivers:
  -Chip Set Utility
  -Display driver
  -LAN Driver
  -Driver Lan Wireless
  -Sound Driver
  -Intel Active Management Technology (AMT)
  - and so on...

  Please note that the laptop supports the SATA HDD controller and you need to install and include the SATA driver while the Vista Setup program.
  The SATA driver is part of the Intel Storage Manager.

• Portege R600-11b - cannot install Adobe Acrobat 9 - ActiveX problem

  I recently bought a Portege R600-11b and have tried to install Adobe Acrobat 9 on it by downloading it from the Adobe site.
  I spent many fruitless hours talk to Adobe to try to solve this problem.

  They concluded that my laptop is not compatible with the software.
  This isn't the case, that this laptop exceeds the specification of systems required in all aspects.

  The problem seems to be that it won't work ActiveX even after all the firewalls and anti-virus in disabled - I don't know hardly what to do - anyone has any suggestions please?

  > They concluded that my laptop is not compatible with the software.
  That s just absurd

  The Adobe Acrobat Reader software is a small application and can be installed on almost all computers and systems so that s certainly not a reason why you are not able to install this software.

  If this problem is related to the ActiveX, then you can change this in the settings of your internet browser.
  For example, using the IE7 you could modify this here:
  Tools-> Internet Options-> areas-> {}-> ActiveX controls and plug - ins area-> allow unused ActiveX controls to run without prompt

  You can also try to clean the operating system and the registry because the problem might be related to faulty registry entries.
  To do this, I would recommend using the free CCleaner tool.

  Finally and above all it s always advisable to consult the homepage of support from software manufacturers. Here you will find some documents on installation with the Adobe Acrobat Reader software problems.
  http://www.Adobe.com/support/reader/

  Check it out!

• Portege R600 - display problem device change Utility

  We started to use computers laptop Toshiba Portege R600 series on my place of work. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

  The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

  The problem occurs when the laptop is not docked since the Replicator. After having similar problems with R500 series laptops, Toshiba following applications have been installed:

  (1) common modules (version 6.06.01)
  (2) controls Toshiba (version 3.31.3800)
  (3) button ON / OFF (version 2.5.1.0_IS115)
  (4) Toshiba utility (version 4.30.18)
  (5) Toshiba screen device change Utility (version 2.5.0.0)
  (6) Toshiba Hotkey utility for display device (version 3.4.5.5)
  (7) Toshiba Mobile extension 3 for XP (version 3.87.00)

  We now have the following symptoms:

  (1) detach, the "gear" icon appears and then the error "TOSHIBA Display Device change Utility is not installed correctly. Please install TOSHIBA screen utility unit of change. "
  (2) for the mooring of the laptop again, we get the "home" icon, and then the same error.
  (3) after that, the external monitor does not become active once again, until what you press Fn + F5.

  I have tried uninstalling / reinstalling the TOSHIBA screen device change utility. Have tried to remove the Mobile Extensions and install the software, tried a number of different things to make it work. Rebuilt 1 stop working and everything was installed in the order above without success. In fact, noted that during the installation of the TOSHIBA utility screen device Change the Setup screen starts and runs, but the window does not uninstall.

  This seems to be a driver problem with those from Toshiba, but I'm not sure. Someone at - it suggestions regarding this? The drivers that I use are on the site of Toshiba Australia (even if they are the same drivers found on the main website of Toshiba). The link below.

  http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/driver_search_list.jsp?BV_SessionID=@@@1187200925 .1241154604@@@&BV_EngineID=ccccadeglfeghejcefecek fdffhdfgh.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Portege & ProductMenu_2 = 1509603 & x = 22 & y = 7

  Post edited by: Will-SOE

  We have tried this on a couple of machines that are the same exact specifications. The model that is sold in Australia is a Portege R600, model PPR61A.

• Portege R600 - do I need for Windows 7?

  Hey there. I have a Toshiba Portege R600, my first laptop, and I'm in love.

  I'm angry against Vista Business, but also, I get angry to Windows XP. I would like to give a whirl to Windows 7 since I heard good things about her.
  I now burn a recovery disk as I type. What else do I need? On the desktop, there is a folder called "Applications and drivers TOSHIBA" so I guess I have to save those on a USB and load them onto Windows 7. What if drivers? There is so much and I don't want too many applications, the cluster disk.

  Tips for a first time the laptop computer user?

  > Windows 7 a whirlwind since I heard good things about her.
  I've never heard of Windows 7 good things still
  I think you forget that Windows 7 is only at the stage of beta or as far as I know already a Release Candidate but it s not a final version. So that means it may have a few problems and the pilot in charge is not as good as on Vista or XP.

  However, if you need the Windows 7 drivers you must search on external Web sites for pilots, but sometimes the drivers for Vista also works on Windows 7.
  Check it!

  All the drivers and tools that you can download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Portege R600 - 13 X - how to reinstall the operating system on the new HARD drive?

  Hello

  I inherited a Portege R600 - 13 X of my colleague, who hit and killed the hard drive. I installed a new hard drive, but you don't have operating system installation diskettes as he said that the computer has not come with any. To make things even more difficult, I believe that the optical drive may not work. My old R500 had a dead optical drive and after I replaced it (he has not yet worked) I was told it is perhaps something to do with the ribbon cable, which piggy back off the coast of the SD card reader, then to the motherboard.

  Anyway, is it possible for me to install Win 7 Professional (I have the original windows key) from a USB flash drive? Or y at - it a specific OS recovery/reinstallation disk that I can download Toshiba?

  Any advice would be very welcome
  Thank you
  NJ

  I have a Portege R600, and he has been a formidable workaholic, although now showing its age with newer software.

  I think these machines came with pre-installed Vista and your friend must have created a set of recovery discs when they got off the machine.

  Toshiba did release a drive to upgrade when Windows 7 is released which was available to the buyer within the free upgrade period you. You may be able to find a disk, but you will need the Win7 license to go with it.

  If not, your only option is likely to be to buy a disk and license. Of course, you can find the specific Toshiba drivers are missing. If you think about it, it's extremely unlikely that you will be able to locate what is essentially a free Windows 7 download install disc.

  Without an optical drive, you need to use an external USB drive and the BIOS to boot from that first force.

  I hope that you have succeeded.

  Andrew

• Portege R600-10 q keeps freezing after a short period of use

  Hi I have a Portege R600-10, q,

  It keeps freezing after a short period of use - although if I leave it for a few minutes, sometimes it can be useful.
  If it is turned on for long enough, it will display a blank screen and the fans will turn on very hard.

  I cleaned ports ventilation and re-glued the CPU, and it did not make a difference.

  I ran HDD and memory (mhdd/memtest) diagnostics, and they have all done.

  I reinstalled Windows (from the OEM disc) and I still see the same question.

  Anyone have any ideas on how to solve this problem?
  Thank you

  Hello

  Have you noticed that when running special software or apps?

  I can tell you that a memtest does not always provide a good result
  Even if the memtest said there is no problem with memory, RAM modules could malfunction

  Otherwise, it may be a motherboard problem, but this is just speculation

• Re: Portege R600 - upgrade to hybrid SSD + Win7

  The R600-4201 is _For far_ the best laptop computer I have ever owned or even seen, and I intend to keep it for as long as possible. I just bought a Seagate Momentus XT hybrid hard drive (SSD + magnetic) and Windows 7 Ultimate edition.

  To support installation hardware and the operating system switching from XP to W7, I will have redundant (more local cloud) perfect backups of data files to e-mail, data files, passwords, etc.

  Can anyone here guide me more access to specific Toshiba updates, drivers, BIOS, etc., should be done? Further guidance or advice will be greatly appreciated.

  Thank you!!!

  I think that this portable 2-book with the new operating system and hard drive will challenge anything on the market today. With radio offshore and with the Transflective screen, I get more of * WORK SIX HOURS * at the park or at the beach - there just isn't any better than that.

  Hi dude

  Thanks for the comments on the Portege R600.
  I like this laptop. I wish that I would have enough money to buy this toy, but I have a u400. It of also great computer laptop not too big... the size of the screen is perfect because I travel a lot

  By the way; You can find all the drivers (also for R600) here:
  http://EU.computers.Toshiba-Europe.com/

  Welcome them

• Portege R600 - detected SD cards but cannot navigate or format

  Hello

  I have problem on my Portege R600-10U (Windows 7 Ultimate) with SD card reader. When I put the SD card into the slot it is detected by the system, but I can't the eyebrows he or I can do format.

  I did the installation of RICOH_Media_Driver_v2.07.01.00 on the Toshiba support site, but when I check pilot for SD card reader is show a generic driver by default Microsoft.

  Also I don't know if it's important, but I can see player sd on the list of devices only when I put the card in the card reader.

  I even tried to do a manual installation of the driver by selecting the extracted content of CRAC - 20091103162555.zip (RICOH_Media_Driver_v2.07.01.00 folder), but windows didn't find the INFs appropriate in it.

  Me missing something, is there a prerequisite not before installing the card reader driver or card reader perhaps it self does not work properly.

  Many thanks in advance,
  Igor

  > Card he is okay since I use it in my camera
  This could be the problem

  I think that you can access this SDHC card if you should first format!
  There should be a preinstalled tool called SD memory card format.
  Format the SDHC card first, and then try again.

  PS: The card reader must manage SD up to 2 GB card and SDHC up to 16 GB cards

• Application of Portege R600-10 t display driver update

  Hello

  I'm looking for the latest display driver for my Portege R600-10 t (to see if she would be 1440x900@75 the value).
  Went to the corresponding page on the uk.computers.toshiba - Europe.com, and it showed the following:

  30/06/09 | Display driver | Intel | Windows Vista 32 bit | 15.9.9.1527 | World Wide

  When I checked the complete info, he showed the following:

  FTP - URL _display - 20081117151809.zip_
  Date of last change * 30/06/09 *.
  Intel Corporation
  Type display driver
  Subtype (none)
  Size (KB) 19568
  Version * 15.9.9.1527 *.
  Universal language
  Countries world wide
  Description this driver improves the functionality of display device and allows you to perform different settings, such as color management, monitor properties or control of overlay. You can also get help if you have related troubleshooting display issues.
  Portege R600, Portege A600 model
  Windows Vista 32 bit operating system

  When I download the file, it is called _display - 20081117151809.zip_
  When I install it, it's the version * 7.15.10.1527 * whose date of * 07/11/2008 *.

  I'm sure I chose the right OS, and I tried several different ways to get the downloadable file, including letting my automatic detection system. Same result.

  I don't know if I am missing something... ? Where is the 15.9.9.1527 of the display driver version?

  Thank you

  Post edited by: kiden

  PS - I was already on v7.15.10.1527

  Hello

  Average was last modified time when this package has been uploaded to the database server. Therefore, there is another date.

  By the way: the last pilot, you will find on the page of Intel.
  I have a laptop with Intel GPU and I use the driver from the Intel page.

  By the way: the resolution of the screen depends on the graphics chip and internal screen.
  If the display does not support preferred resolution for you, then you will not be able to select this