Cisco Telepresence Server/Cisco Telepresence driver/Cisco VCS - C / Cisco TMS license

Similar Questions

• Exchange of TMS 3.0.1 & TMS 13.2 Cisco TMS server does not respond. Put an end.

  Hello

  I recently upgraded to TMS 13.2 and installed Exchange TMS 3.0.1. Installation and Configuration worked well, but no event is synchronized to MSDS. If I look at the log file, I see the following line:

  Cisco TMS Server is not responding. Halting.

  It seems that TMS Exchange is not able to communicate with the TMS. Setup worked well, and the TMS user is Super Administrator, so I don't think it's a problem of permission.

  I have attached the journal exchange of tms with level Debug of the game.

  Any ideas?

  Hey

  Using HTTPS or HTTP to communicate with the SMT server through the TMSXE service?

  Also, I would look in the Windows event logs to see if there's something interesting here. Especially check the application + TMSXE the event logs. I Don t want to join here (it's for the TAC) but if you see something that could be linked to the issue, please let us know.

  Otherwise, I recommend you get help from TAC on this since it is more appropriate for a deeper repair.

  / Magnus

• CUCM + MCU + CISCO TMS integration

  I'm marching integration with MCU 4.5, 10.5 CUCM, sx20 and TMS 14.5

  According with manual bellows

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/MCU...

  I ve done a Deploying an MCU as a multimedia resource for Unified CM.

  MCU has a SIP trunk with 10.5 CUCM, MCU is recorded as the Conference on the multimedia resource.

  SX20 Conference ad hoc works well with another 7 codecs.

  My question is

  I want to plan conferences by mcu or cisco TMS, but I am not able to do.

  How can I integrate Cisco TMS or planning by MCU?   It s not working not on my side.

  Hello

  Please see the following guide

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS...

  HTH

  Manish

• SNMP device through cisco TMS

  Hello

  I have some devices (2 CTS 3010, CUCM, GST of VCS - C and 3 2 1) managed by a Cisco TMS. I want to monitorate all devices to a network/system like HP OpenView management tool.

  Is it possible to leave the TMS works as a server snmp / trap receiver, and transmit received traps to network management tool? In other words, is there a way to configure trap forwarding in TMS?

  The TMS, I configured the IP address of HP's OpenView under network configurations, but it doesn't seem to work.

  On CUCM, I configured the Ip address of the TMS as trap receiceiver.

  Thanks in advance

  Hello

  TMS uses only SNMP interruptions for older systems (MXP, TANDBERG classic). Traps SNMP of newer systems (series C, CTS, MX, E20, SX20 etc.) and products (CUCM, VCS, MCU, gateways) network infrastructures are ignored by TMS. (it's not mentioned as well in the documentation, but I'll look in there clarifying). So no, you can't configure the transfer of trap in TMS.

  But why do you need TMS to send traps to an external system; could not do of your endpoints send traps directly to the external network management tool?

  Kind regards

  Kjetil

• where the Cisco TMS database knowledge guidance document?

  The TMS Installation done doc refers to the following doc:

  Cisco TelePresence Management Suite database knowledge tips

  D14216

  But I can't find it on CCO.

  Does anyone have a copy of that PDF?

  The copy that I named:

  Guide to setting up Cisco TMS SQL database product

  December 2010 D14216.01

  A little outdated.

  Rgds, Geert Folens.

  Looks like it is available online:

  http://www.manualslib.com/manual/408637/Tandberg-TMS-SQL-database-configuration-guide.html

• Addition of Cisco IOS Gatekepper to Cisco TMS

  Hi people,

  Does anyone has idea about adding Cisco IOS Gatekeeper for Cisco TMS. I tried it. added, but no luck.  We use the TMS 13.2.2 and IOS 12.4

  Thank you

  Hi Jean Claude, please refer to product support 13.x TMS guide of

  http://www.cisco.com/en/US/docs/telepresence/infrastructure/tms/interoperability/Cisco_TMS_Product_Support.pdf.

  I don't see that Cisco IOS GK is tested with TMS.

  BR, Mahesh Adithiyha

• Cisco TMS 14.4 "Ajax request failed...". »

  Hi Experts,

  I installed Cisco TMS 14.4, installing all makes them very well, but at the first connection, I had error in Pop - Up The Ajax request failed...

  TMS ERRORCOOKIE {FF44A030-7F95-461C-8065-615FCE335F7B} var TMSError = {toggle: function (tableId) {var errorTable = $(tableId); errorTable.style.display = 'block';}} TMSElement.positionCenter (tableId); $('InfoTable').style.display = 'none '; }} Stop_Wait();   An error has occurred!
  Please click the back button on your browser to return to the previous page or click here to go to the front page of TMS. If the problem persists, contact your administrator to TMS.

  You can see the image

  Can someone help me

  Thank you

  Hello

  It should be a more specific error message in the log - web.txt, located in the \data folder in the MSDS on your server installation directory. What did he say?

  Kind regards
  Kjetil

• Cisco TMS first activate Idle all sessions

  Hello.

  We have the video conferencing system with Cisco TMS, blades MCU 8420, Tandberg Gatekeeper and Cisco in the series C endpoint, MXP series etc...

  This week we have problems with planning because when we planned to meet his past of in waiting for idle session direct and all sessions the codec says no connection.

  never start the meeting on active sessions.

  then that we end the session or meeting and reprogram this session and that begins at the current session.

  IM verified the conectivity between Cisco TMS and MCU, Endponits its Ok.

  rigth now we rebooted the server and MCU and the GA but when even continue the problem.

  The cisco TMS its located in other areas with transit to WAN network. We reserve the bandwidth with QoS for video, voice and data for im MCUS and endpoints asking its required reserve BW TMS Cisco commands API, Https, Https and other protocols? the problem may be congestion in WAN networks?

  This Protocol should ensure guarantee connect API orders end to end of Cisco TMS - MCUS and endpoints.

  I appreciate your support.

  Giacomo BR P.

  I did not completely understand your description.

  The communication is done on MSDS by HTTP or HTTPS, depending on your settings.

  In general, I would say that the management / follow-up will also through these ports, I would

  expect tickets with problems logging on your TMS.

  I could look at the logs and see: is the Conference properly generated on the MCU.

  is the dial in number okay, can the scope of endpoint the mcu, can the mcu reach end points.

  y at - it something suspicious on the GK, conferences and any other reservation of port

  on the MCU

• TMS of Cisco 'Unable to access Cisco TMS' error

  Hello

  I have another problem with the server of TMS as well! On my Web interface, I get the message "Unable to access Cisco TMS - TMS Incorrect database version" detected! Someone has an idea?

  What TMS version?

  Is it a new installation or you migrate TMS and TMSPE?

  This error is usually visible with the TMS upgrades/migrations when the SQL database is running an earlier version.

  Difficulty, uninstall TMS and then reinstall it.

  During the re - install, you will receive a prompt to upgrade the database.  This should fix the problem.

• can plan us the Conference from Outlook with Cisco TMS

  Hi team,

  is it possible to provide to the Conference by the prospect with Cisco TMS, we have no license to Exchange provisoning. Y at - it a plugin that can be used with Microsoft outlook.

  Please advise.

  See above for my response, either you need to purchase the license and install / configure Setup

  or you program something yourself.

  I would not exclude that there could be tools external hookin upward on the MSDS as well, but I'm not aware of anything.

  The other way is to do it by politics, rent rooms and is a participant dials up to the

  others or if the meeting is greater everyone connects the mcu...

• Cisco TMS taken in charge the list of endpoints

  Is there an updated version of the supported Cisco MSDS list endpoints, as can be found here:

  http://www.Cisco.com/en/us/products/ps11338/tsd_products_support_integra...

  This document has been updated for Cisco TMS 13.2, and we are now at the time writing on CIsco TMS 15.1

  I want to check if changes have been made between 13.2 and 15.1 of decline in support of endpoints, or support of the additional endpoints, including?

  Thank you

  Cisco stopped publishes the document after TMS 13.x MSDS product support, refer to the searching for information on the supported by Cisco TMS systems for more information.  That said, you must reference it TMS Release Notes to see what support has been deleted and added in this output.  You can also take a look at endpoint-support-tms-14-and-tms-15 for a list of example of endpoints wire is no longer supported Wayne created.

• Do we need to purchase the license to upgrade the VCS, VCSe and TMS?

  Hello

  We need to get a new license when upgraded version of VCS, VCSe and TMS?

  Hi Kelvin,

  xxx. OVA files are package files to deploy the VCS on virtualize platforms.

  Release key are required to upgrade the VCS for major updates. for p. ex. upgrade of x 6 x 7 software version worm.

  However for improvements minor as x7.2 to x7.2.2 these are the released hotfix version or bux fixes release and you don't need a license for this upgrade.

  in any case if you your devices are less covered by valid contract you can get the license key anytime just contact cisco license team on "[email protected] / * /" and they should be able to provide the necessary license.

  Rgds

  Alok

• VCS FindMe vs TMS FindMe

  Ladies and gentlemen,

  I have integrated our VCS (including management FindMe) in terms of a TMS, but subsequently in the VCS > status > Application > menu user Lync State I see the CMRS only, but not the end points recorded.
  I have several questions:

  1. How can I configure the TMS to publish endpoints of telepresence as an account FindMe (to see them as a registered Lync client)
  2. Currently all CMR have the status offline, is it possible to change their default online status?
  3. Finally: How can I restore the FindMe management to VCS of the TMS. In the latter case, I would be happy if I could put in place.

  Thank you
  Laszlo

  You can use TMSPE for a variety of uses, such as the provision of devices, FindMe, Collaboration meeting rooms, etc.  In your case, you use it to FindMe and CMR.

  Under Provisioning > users, manually create or import AD users and assign them a 'video address model. "  The boss of the address of the video will be their address FindMe and them will automatically create a FindMe account for each user in Provisioning > FindMe where all you have to do is to create associated device addresses, and locations, etc. that will connect to the address the user FindMe.

  The menu devices is for devices implemented and can be ignored in your case because you are not provisioning all devices through the VCS.

• The server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller.

  Hi all

  Can I confirm with expert from Microsoft, it's windows foundation server 2012 may not be the first domain controller (which means that the first AD in the forest)? It must be attached to the root of the forest as a domain controller. If I'm promoting it to be first DC in new forest, he invites you to "the server has not completed the compliance audit of the licenses. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliant check cannot be completed, the server will automatically close in 9 days...

  Thank you & best regards
  Andy

  Hi Andy,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  Hope the helps of information.

• Cannot add VCS Expressway to TMS

  I'm trying to add the VCS Highway to TMS.  When I add, TMS tries to connect via different protocols.  Then it errors and the screen refreshes quickly enough, and I don't see what happened.

  Where should I go to try to determine what happened?

  Suggestions to solve this problem?

  Thank you

  Ron

  Is this a new deployment? The SNMP on VCS is disabled by default.

  Check the setting of SNMP on the CV:

  System > SNMP

  SNMP mode: v3 more TMS support

  Try to add the VCS on MSDS once again and if you could share the screenshot on everything that happens when you add to the system.