Cisco UCSM 6248 Avail State: not available

Similar Questions

• Want to 4500 Ink Instant stats not updated on the HP website

  I had a craving for 4500 in August and is part of the instant the ink drawing, but the stats on the site for ever day. I click on the button refresh it but it still shows zero pages printed. He never contacted the printer successfully since the initial installation. It shows the printer online and registered.

  I had to reinstall several times due to its freeze and refuses to print and so on; overall I found a printer very unreliable - currently, to print I have to send the print job before starting, or he only says: it is printing but never did (I did a reset partial firmware and it worked for a day or two). It's also a little desperate that HP support agents are available only when I'm at work! What is the use of that? In any case, discuss-this request is to know how to get the statistics to work on the instant site of HP ink.

  Hello Artymind,

  Welcome to the Forums of HP Support!

  To my knowledge, the County will not take effect until you have installed the instant cartridges you get from the starter that is sent to you after your registration kit, did you do that?

  Best instant look in this investigation from the ink, I would suggest speaking with the support of HP Cloud team at 855-785-2777. If you do not live in the United States / Canada region, please click on the link below to get help from your region number, click HERE to find the number of Technical Support for your country/region.

  Kind regards

• Help: Customer Cisco VPN & Split Tunnel but not Internet

  Hi Forum.

  We are faced with this problem: after having successfully open a VPN connection with the Cisco VPN Client to a router Cisco, the rest of the world are not properly available more.

  This is what has been verified / so far attempted to identify the problem on a Windows Vista computer:

  -Router: Split Tunneling is allowed according to sysop

  -On the VPN-Client: "allow Local Lan access" is checked

  -On the Client (statistics): only STI VPN-rout configured listed unter "guarantee routes." "Local Lan routes" is empty.

  -Calling 'http://www.google.com' in IE fails

  -Call ' 74.125.232.116' (IE IP) IE works / ping the IP works.

  -nslookup properly lists the current DNS server

  -nslookup www.google.com resolves correctly the name of intellectual property

  It seems that it is not that the connection with the rest of the Internet is deleted, but DNS resolution fails somehow, even though all signs point to the appropriate DNS server is in force and although the command line can resolve the name.

  does anyone have a tip how to debug this correctly?

  No worries Pat...

  Sent by Cisco Support technique iPhone App

  -Please evaluate solutions

• DbAdapter is in ready state - not to have activated.

  Hello
  
  I create pools of connections in the cluster environment. I did this DbAdapter target for all servers in the cluster. Connection pools are created without any errors. Update the DBAdapter is also a problem. But the DbAdapter does not return to Active status, it is in prepared state.
  
  Plan is being updated with the name of connection pools created and so I made this file plan are available to all managed servers.
  
  All data stores are in operation. But the status of pools of connections is in suspended state. And also pools connections are missing in the JNDI tree. Nothing is present in the EIA/DB folder. So what shal I for the adapter db in Active state. Please help me.
  
  
  Concerning
  Prabhu

  Try clicking on start-> Service all requests for the data adapter.

  concerning

• Desktop icon when the program double clicked States not recognized go to control panel of the value binding

  I have a PC running windows vista. Recently, the desktop icons when double clicked do not work, a message appears telling me that the program was not found and to go to the association Control Panel to fix this value.

  I'm now PC expert so would appreciate any advice in simple terms.

  It happens with all the desktop icons, or only some?  If only some, what are their types of files (extensions - the identifier to three digits after the point in the name of the file)?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates. Then see if you can open your desktop icons.

  There may be something wrong with some extensions (such as .exe files and the .lnk files).  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and run the process for the .exe and the .lnk file types. ;  See if you can open your desktop icons.

  If this does not work, your user profile may be damaged.  To fix this use http://windows.microsoft.com/en-AU/windows-vista/Fix-a-corrupted-user-profile.  If that is the only available Administrator Profile (you need to be an administrator to fix this), enable the Hidden Administrator Account (HAA) using http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?&lang=en&cr=US&guid=&sloc=en-us&dg=microsoft.public.windows.vista.administration_accounts_passwords&p=1&tid=d20f9db4-7b2c-48be-a087-7835dc2a9055&mid=d20f9db4-7b2c-48be-a087-7835dc2a9055.  If you don't remember the password, try nothing because that's probably what you (or seller) did during the installation.  Once that is done, don't forget to disable the HAA to save it in case it is necessary once again and for safety reasons (since people often try to hack into systems using this account).  Do NOT use the HAA as your administrator account because if you lose the only administrator on the system account or it is damaged again, then you're watered.  Then see if you can open your desktop icons.

  If you still have problems, after return and we will try other troubleshooting options.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cisco CUCM 9.1 call not Queuing back no ring

  I have a client who has a hunting group that has 6 users in there, they are routing calls more long inactivity. How the client handles that incoming the call is with the operator-> then they transfer the call to the hunting group.  They want to be able to present the Department of HEALTH when they transfer the hunt group of. I have activated Call Queuing for this group of hunting and define the source of the Ministry of HEALTH for registration of customers and work very well, as long as all agents are busy. When the appellants are trasfered to hunting and agents are available, they hear tones as the call goes agent to agnet, until it gets answered. The client is eager to eliminate the tone during the cycle of the hunting and just play to the Ministry of HEALTH. I know it's possible with UCCX, but they are not ready to buy UCCX. Is there a way I can to silence the tone and I have MOH while the call is hunting?

  Hi, there is a product that is designed exactly for this:

  http://www.imagicle.com/go/queuemanager

  It extends the functionality of embedded call queues and is already certified 9.1, available in the catalog of solution and also providing a historic declaration.

  License by channels and not by operator/agent, cheap, dramatically EASY deployment, configuration and management.

  Offer a supervisor app on iPAD for free charge and can be combined with the console operator imagicle (http://www.imagicle.com/go/bluesattendant) for a full, professional, out of the service solution customer box.

  You can contact imagicle for more information or download the eval 30 free days.

  Kind regards.

  Christian Bongiovanni

  coCEO and CTO

  Imagicle SpA

• ASA Cisco IPSEC VPN tunnel has not managed the traffic

  Hi guys

  I am trying to set up a new connection IPSEC VPN between a Cisco ASA 5520 (verion 8.4 (4)) and Checkpoint Firewall. I managed to establish the phases IKE and IPSEC and I can see the tunnel is UP. But I can't see any traffic through the tunnel. I checked the cryptomap both ends and try to test with a contionuous ping from within the network of the SAA.

  I made a screenshot of ICMP packets but cannot see in ASA. I welcomed the icmp inside ASA interface.

  I did a package tracer and it ends with a fall of vpn - filter the packets. But can not see any configured filters...

  Your help is very appreciated...

  Thank you

  You probably need to add nat negate statements:-something like.

  object-group network OBJ-LOCAL
  Network 10.155.176.0 255.255.255.0
  object-group network OBJ / remote
  object-network 192.168.101.0 255.255.255.0
  NAT static OBJ-LOCALOBJ-LOCAL source destination (indoor, outdoor) static OBJ-REMOTE OBJ-REMOTE-no-proxy-arp

  You are running 8.4 nat 0 has been amortized

• Cisco FI (v2.5) + (2232PP) = not taken into charge-model FEX

  Hello

  We run a laboratory for a future project "installation program of the bunch" - Cisco fabric interconnect with FEX. Installation of the laboratory is 6120XP version 2.5(2a) and 2232PP FEX, yet it maintains off trowing erros. An error that comes out is F1635 ("Fex N2K-C2232PP-10GE is not supported in this version of UCS Manager"). According to literature UCSM v2.0.2 and more should support FEX on FICs times 6100 and 6200. What I am doing wrong? I appreciate all help.

  Hello

  UCSM 2.5.X is for cartridges of the modular UCS (M series).

  UCSM 2.X.X (for example 2.2.5B) is for the UCS blade/rack servers.

  If you upgrade your UCSM software to be a correct version, you should see is no longer the mistake.

  HTH,

  Wes

• CPU NTVDM has encountered a statement not valid CS:121 has IP:02f5 OP:63 22 68 74 3d

  I get this error message when I run the game: 'Flyff Online.

  I tried the following:
  (1) the system before the applicable problem restore
  (2) SFC Scannow on the command line without any problems.
  (3) analysis anti-virus AVG and Malware scans running.
  I am running Windows Vista 32 bit Home Premium.
  Looking forward to the large community of aid.
  Best regards
  Chris.

  Hi Chris,
   
  Well, I had suggested to you to perform the clean boot and the insecure mode. In a State of clean the boot there will be quite a test question.
   
  Note: Follow step 7 to your computer as usual.
   
  -Reinstall help Flyff online?
   
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• 6248 VLAN do not receive the DHCP scope

  I created two new DHCP scopes in my windows server 2003:

  192.168.2.0 - public, and
  192.168.3.0 - VOIP.

  This DHCP server is connected to a Dell powerconnect 2708, which is connected to our new powerconnect 6248P via fiber point-to-point.

  In the new computers on network on the default 1 VLAN are correctly attributed IPs as they connect.

  I issued the following commands to the 6248 CLI:

  Enable
  Configure
  database of VLAN
  VLAN 20
  VLAN 30
  output

  Configure
  range of interface ethernet 1/1-g1/g2
  switchport mode general
  VLAN allowed switchport General add 20
  switchport General pvid 20
  l2relay DHCP
  output

  Configure
  range of interface ethernet 1/1-g3/g6
  switchport mode general
  VLAN allowed switchport General add 30
  switchport General pvid 30
  l2relay DHCP
  output

  interface ethernet 1/g11
  switchport mode general
  VLAN allowed switchport General add 20
  VLAN allowed switchport General add 30
  l2relay DHCP
  output

  Configure
  interface vlan 20
  name 'PUBLIC '.
  Routing
  IP 192.168.2.1 255.255.255.0
  IP helper 192.168.1.150
  output

  Configure
  interface vlan 30
  name "VOIP."
  Routing
  address 192.168.3.1 255.255.255
  IP helper 192.168.1.150
  output

  IP routing

  I also added all traffic on VLAN 20 and 30 of VLAN on ports 1/g11 (6248) and port 2 (2708). VLAN 1 access was removed from ports 1/1/g1-g6 (6248)

  Everything seems to have been set correctly, but I can't get a response from the DHCP server on all ports attached to VLAN 20. The powerconnect 2708 switch is unable to pass the baton to the server? Is it possible that something falls in the point to point?

  I would greatly appreciate any comments or suggestions, thanks!

  The 6248 has no default gateway. It wont let me put 192.168.1.1 because he does not reside in the same subnet as the 6248 (192.168.99.1)

  The 2708 has listed 192.168.1.1 as its default gateway.

  At this point, the network has too many complexities for me to unravel. I am very happy that at least I solved for DHCP when we finally migrate our server to the new location.

  Once the server is up, and the gateway/firewall are directly connected to the 6248; I will review the correct configuration of this network.

  Some advice to those who might have a similar problem: check your management VLAN. It may not be the same VLAN 1 if you plan to routing to work from VLAN 1 to nowhere else because the VLAN management cannot be routed. Also check static routing of your access point, make sure the front door has a return of the ips of your VLAN, IE: 192.168.2.0 255.255.255.0 gateway_ip

  That's all for now. Thank you to all who have contributed

• Cisco Telepresence EX60 records do not in CUCM

  Hello

  Can you help me regarding this issue. Our client has registered in VCS before EX60. Customer decided to registered on CUCM, but before the client has performed a factory reset on the EX60.

  Now, EX60 is not save in CUCM. CUCM version is 9.1.

  And also I already followed the guide for the retail version of CUCM with TC6 firmware.

  Please see attached configuration please. And also attached are the newspapers. And also the error message, we enter.

  Thank you

  The following error may be seen in the papers attached EX60:

  Jun 1 12:47:00.844 ppc appl [2971]: 156,29 SipStack W: [Transaction 32]: got exception SIP_MSG_EXCPT = 8 transport layer
  Jun 1 12:47:00.847 ppc appl [2971]: 156.30 SipReg W: Transport failed to send record (sipexcept: 8 fermΘe by the remote side connection)
  Jun 1 12:47:00.849 ppc appl [2971]: the State of the server SipReg W: SipReg F Unexpected 156.30: 8

  Maybe something closes the TCP on the EX60. Is there a firewall between CUCM and EX60? Can we disable SIP on the firewall inspection and analyze the recording?

• Cisco's NAC agent does not

  Hey guys! My school uses the Cisco NAC Agent for security on our network, but it gives me problems at the moment. My Windows is fully updated, a mandatory requirement. However, I have done some Windows updates automatically for a while now, and I spent the last few hours manually, download, installation, System Restore to a date in the past and then redownloading, etc..

  I'm in my third year on that campus, and I always had minor problems, which none has caused me a problem until now. I'm not sure what the underlying problem is, and I don't know if this is a common problem for this stage, but I was hoping that I could receive aid better here that guys in the student technology services desk. I am working from my laptop on campus wireless, but this isn't helping me get my Office Online

  I have attached the newspaper report of Cisco of the packer.

  Hello

  We can see the agent to tell you:

  "Your computer is missing one or more critical updates. Run Windows Update and check that you have all critical patches installed. »

  And it's true that Agent to do some checks which is a failure.

  Now these controls check some registry keys related to Internet Explorer and a few other internal items.

  Unfortunately, it is that your network administrator which should help you to solve this problem, because the application of the NAC Manager will have a detailed report of what exactly a failure in your machine and then the requirements are changed to allow you to access or your machine must comply with the requirements.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• The cisco touch 10 Soundbar does not work

  Hello

  The devices are registered on CUCM 10.5.

  We use a SX20 with Touch10, it works fine except the Touch10 Soundbar, it cannot work.

  What could be the problem?

  Thank you for your support

  Homayoun

  What do you mean by soundbar? Is the volume control button Unit 10 touch?

  Have you tried factory reset of the device touch 10?

  Check out the video link below and you will guide you how to the factory to reset the device:

  https://www.YouTube.com/watch?v=bTGuxht_7Ww

  If factory reset does not resolve the issue, contact Cisco TAC if your contract of service for this device. They would replace the hardware problem if discovered unit.

  Kind regards

  Acevirgil

• How to check a cisco image when the device not approved (hacked)?

  I have a cisco router that I don't totally trust. I want to check the image to verify that it has not been reinstalled with a notched. The verify command indicates that the image is ok.

  As I checked the image on the router itself, but with the help of a possibly compromised system I have not totally trust this information.

  Issues related to the:

  * Is it possible to deploy "hacked images" or the low level of cisco boot loader refuse to load such an image due to internal hardware signature checks that cannot be falsified.

  * I have uploaded the image of the router. If the router contained a manipulated image (and has not changed during the download so I downloaded a fake but the original image), how can I check the content when it is stored on my workstation. Cisco Web sites contains a few 'service' where I ask md5sum/sha1 /... for a version of the given image?

  Thanks in advance for any answers.

  Hello

  I guess you can always boot in rommon and audits/transfer from there?

  jF

• CPU NTVDM has encountered a statement not valid CS:0593 IP:01 has 6 OP: ff ff 00 00 ff

  I recently started getting this message when I connect to the internet. I read other articles on the NTVDM meeting but I was not able to find the answers reveal or a fix. Anyone know how I might be able to solve my problem?

  To connect to the internet or open your browser?

  Does it occur if in a clean boot state? http://support.Microsoft.com/kb/929135