CiscoSecure ACS UCP request help needed

Similar Questions

• Please can someone help, need password CNU9497P2C

  I have the same problem and its driving me crazy... I need the BIOS password because I can't access to this

  [number of Series edited by Moderator]

  Please can someone help, need password

  HP MINI CQ10

  Sweb try.

  e9lovox27e

  3rd letter tiny L.

  4th and 6th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Issue of ACS UCP

  I have ACS, IIS & UCP installed on the same Windows 2003 server. UCP has been installed recently. IIS configuration was made before the installation of the UCP.

  After installation I tried to UCP accessing through the URL http://localhost/secure/login.htm

  I get the login prompt. When I enter the user name and password, I get "cannot display page" Web page. Please let me know the resolution for the same thing.

  1. make

  2. make

  3. making

  4. make

  5 fact

  6 do

  7. do

  8 do

  9 - restart windows 2003 Server

  10 - from the ACS itself, server launch https://server/secure/login.htm

  11 - the Cisco Secure ACS UCP Application looks:

  12. Enter an ACS useraname user and password:

  It is said:

  The page is not found

  The page you are looking for has been removed, had its name changed, or is temporarily unavailable.

  Error HTTP 404 - file or directory not found.

  Internet Information Services (IIS)

  More ideas? Thank you.

• CiscoSecure ACS RADIUS logs upload on FTP Server v4.2

  Hello

  I use an appliance v4.2 CiscoSecure ACS, in this sort as RADIUS logs upload on FTP server because it has limitation for storing RADIUS logs.

  Please advice.

  Thank you

  AS

  You can only configure logging remotely. The Cisco Secure ACS Solution engine devices configured to use remote agent send the record directly on the logging of remote agent service, CSLogAgent data. CSLogAgent wrote logging hard disk data to the location specified by the configuration provider. The logs contain the columns specified by the configuration provider.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp703058

  Jatin kone
  -Does the rate of useful messages-

• Create a direct request - I need help!

  Hello everyone...
  
  I worked with BIEE 10 g for some time.
  
  It is necessary to create a direct request to the database, in order to solve some special Business needs, but I found some troble.
  
  Validate the SQL and return of columns work just fine, but when I ask the results I get the below error:
  
  "Error codes: OAMP2OPY:Q4NU7XSN.
  Invalid handle of ' saw::NQWebView of the class *' Exception
  "
  
  I didn't khow what to do anymore...
  
  Greetings from the Brazil.

  Hello
  Problem is that you do not have access to run the direct request of the database. In order to access login as administrator and go to settings-> administrator-> manage Priveliages-> check for direct application of the database options in the list (Ctrl + f and search for direct), you can see run request direct access to database, add the user with whom you work and make its access granted.
  It will work.

  Click on correct if answered :-)

  Kind regards
  Srikanth

• need help, need to add a button to remove my request?

  I have a small application that you can add numbers and email friends too

  I would add a negative sign selection/input button?

  any of you guys have any ideas?

  Stop();

  create a sql login
  var conn: SQLConnection = new SqlConnection ();

  
  Add an event for the open event handeler
  conn.addEventListener (SQLEvent.OPEN, openHandler);
  create the database if it does not exist, if not just to open it
  var dbFile:File = File.applicationDirectory.resolvePath ('exemplu.db');
  conn.openAsync (dbFile);

  
  function openHandler(event:SQLEvent):void {}
  create a new sql statement
  var sql:SQLStatement = new SQLStatement();
  the value of education to connect to our database
  sql.sqlConnection = conn;
  analyze the sql command that creates the table if there is no
  SQL. Text = "CREATE TABLE If NOT EXISTS contact ("+ ".
  ' id INTEGER PRIMARY KEY AUTOINCREMENT, ' +.
  "digital TEXT +,
  "telefon) INTEGER";

  
  Add a new listener to the event to the sql when it is finished creating the table
  sql.addEventListener (SQLEvent.RESULT, retrieveData);
  call the execute function to execute our statement
  SQL. Execute();
  }

  function retrieveData(event:SQLEvent_=_null):void {}
  create a new sql tasks
  var sql:SQLStatement = new SQLStatement();
  sql.sqlConnection = conn;
  This sql command retrieves all the fields of our
  table in the database and it sorts by name
  SQL. Text = "SELECT id, digital", +
  "telefon".
  "OF contact ORDER BY name ';
  Add a new listener to the event, if there is data
  to view it
  sql.addEventListener (SQLEvent.RESULT, selectHandler);
  SQL. Execute();
  }

  function selectHandler(event:SQLEvent):void {}
  first to erase us from our list
  lister.removeAll ();
  We create it an outcome variable that holds
  all our contacts
  var result:SQLResult=event.target.getResult();
  We check if the results is not empty
  If (result! = null & & result.data! = null) {}
  and we have added a new element of our list for
  each contact in our database
  for (var i: Number = 0; i < result.data.length; i ++) {}
  lister.addItem ({label: result.data [i] .nume + '-' + result.data [i] .telefon})
  Nr:result.data[i].id});
  }
  }
  }

  plus.addEventListener (MouseEvent.CLICK, adder);
  xu.addEventListener (MouseEvent.CLICK, closeapp);
  back.addEventListener (MouseEvent.MOUSE_DOWN, drag);

  because my buttons are not the real buttons
  but movieclips I need to put the
  the buttonMode property
  plus.buttonMode = true;
  xu.buttonMode = true;

  function adder(e:MouseEvent):void {}
  Remove the eventlistener and move to the
  next image
  plus.removeEventListener (MouseEvent.CLICK, adder);
  nextFrame();
  }

  function closeapp(e:MouseEvent):void {}
  Close the application
  NativeApplication.nativeApplication.exit ();
  }

  function drag(e:MouseEvent):void {}
  Drag the application
  this.stage.nativeWindow.startMove ();
  }

  it's on the second keyframe-

  This line restricts user input
  for a few numbers in the input box phone

  Add a new listener to the event to our button "+"
  plus.addEventListener (MouseEvent.CLICK, adder2);

  function adder2(e:MouseEvent):void {}
  create a new sql statement variable
  var sql:SQLStatement = new SQLStatement();
  sql.sqlConnection = conn;

  
  the following sql command creates a new entry
  in contacts him our database table
  SQL. Text = "INSERT INTO contacts (digital,"+).
  "telefon) +.
  "VALUES (@nume,"+).

  "@telefon);

  
  to insert variables in sql commnads
  We use the definition of parameters
  SQL. Parameters["@Nume"]=Nume. Text;
  SQL. Parameters["@Telefon"]=Tel. Text;

  
  Add a new event listener that calls the
  function that retrieves data
  sql.addEventListener (SQLEvent.RESULT, retrieveData);
  SQL. Execute();
  go to section no. 1
  prevFrame();

  
  Remove the eventlistener to our button "+"
  plus.removeEventListener (MouseEvent.CLICK, adder2);
  }

  use:

  minus_btn.addEventListener (Event.MouseEvent, CLICK, clear)

  function clear (e:MouseEvent) {}

  var sql:SQLStatement = new SQLStatement();
  sql.sqlConnection = conn;

  var s:String = "REMOVE from contacts WHERE digital =: numeparam AND telefon =: telefonparam";

  SQL.text = s;
  SQL. Parameters ["': numeparam '"] = either;
  SQL. Parameters ["': telefonparam '"] = what;

  If you want to add listeners

  SQL. Execute();

  }

• SYSTEM RESERVE partition request. Need help. Thank you.

  I accidentally gave a drive letter to the partition SYSTEM RESERVE. So that in the management of the computer - go through the process of attaching a VHD file - I confused myself with the virtual hard drives, I had created and attached etc etc. Was almost going to delete this partition, thinking it was one of those I created, but fortunately do not have!

  She has now, however, drive letter F attached to it.

  First of all, is this going to be a problem?

  And secondly, is it normal to remove the drive letter without causing a problem?

  Hope someone can direct me right with that.

  Thanks in advance.

  Phil

  Assign a drive letter for the reserved system, this is the only way to access the partition through Explorer and itself causes no problems. Drive letters are specific to the o/s kick therefore have effect if the recovery of the operating system is loaded. This is because the BIOS does not work at a partition level.

  Withdrawal of the drive letter will also remove the Explorer views it protects so accidental change and has no effect on anything else.

• [Help needed] Several errors in X 40 with ADF security with or without custom login page

  OTN greetings community, I'm sorry to bother you again, but I need help again once, links to the relevant files (pastebin and imgur) are on the bottom of the post in the meantime ill try to explain my situation.

  I use version 11.1.1.7.0 for JDeveloper with (I assume) updates all of the current side.

  In my efforts to learn more about ADF, I had finished the Apps to build with ADF I guide I produce a 'simple' application to manage contacts, companies and their places of activity.

  With all my functions done and tested semi (small scale) I went ahead and and tried implement security.

  So, with the help of Andrejus Baranovskis Entry of Blog (have been using his blog as a source of information, has contributed to many situations, especially related bean) and fireboxtraining (Part1 and Part2) youtube videos, I have 2 pages, a Login Page (a dispatcher Panel 1 facet has only text showing the user names and passwords connection and the 2nd input text facet 2 related to the bean requesting the user name and Word 3rd password a button that calls the doLogin method) and an error page displays just the text.

  So after you have enabled security, create 2 users, create 2 roles of the company, creating application roles 2 and associating all 2 grants of right one to each role app giving privilege to see on the pages I want, I developed (my goal is that in the homepage, using a mixer according to user's role would display a region that all data can be changed or another that all data is read-only but I don't that have not yet implemented).

  So I went on the test page and unfortunately I hit the 1st wall would not display the login page (seemed to be always be update a blank page in firefox) so I checked if the pages are in the anonymous role and they were. So, as I saw in the video I deleted the page definition files in the Databindings.cpx file and I am past the 1st obstacle has shown the login page. So I typed the username and passwords and I hit my second wall (error 404 - Not found), I saw the code, debugged it and found that he wouldn't be able to hang or something like that (forgive me for my brutal inexperience) then I disabled the security and reactivated with pages of default form, and when it prompted me to type the user name and password I had hit my 3rd and last wall (error 401 - no allowed) which we I didn't wait, I went in the jazn-"Data.xml" and looked if the grants/permissions/roles were ok, in my inexperience, I don't find any problem, so beat I come here to seek support.

  Code:

  MyLoginBean

  MyJazn-"Data.xml"

  MyWeb.xml

  Error logs:
  OnDeployment

  OnLogin

  Screenshots:

  404 full

  401 full

  Sorry for the long post and to put the code in another site (not wanted to put this post more than it already is).

  Thank you very much for your time and your support.

  Hello

  Article http://www.oracle.com/technetwork/issue-archive/2012/12-jan/o12adf-1364748.html

  comes with a sample download, run and explore.

  http://www.Oracle.com/technetwork/issue-archive/2012/12-Jan/o12adf-524995.zip

  It includes all your use cases. So I suggest that start here

  Note that following the code has experienced problems with recent versions of the IDE instead of a side server before we recommend (and will amend accordingly our documentation) to use a redirect on the facesContext--> externalContext instead (I'm typing through while it's not his apparent

  recommended and more)

  ' Private Sub sendForward (HttpServletRequest, HttpServletResponse response, forwardUrl String query) {}

  FacesContext ctx = FacesContext.getCurrentInstance ();

  RequestDispatcher dispatcher = request.getRequestDispatcher (forwardUrl);

  try {}

  Dispatcher.Forward (request, response);

  } catch (ServletException to) {}

  reportUnexpectedLoginError ("ServletException", is);

  } catch (IOException ie) {}

  reportUnexpectedLoginError ("IOException", IE);

  }

  ctx.responseComplete ();

  }

  Frank

• Help needed - function Delete of ADF

  Hi Experts ADF,

  I'm very big thing back to ADF programming (just 3 weeks exp.), I have a requirement to remove the table row. I use jDev 11g. When I press the button delete it should request confirmation YesNo, if she does so I need to delete and validate. Please find my code below:

  Command button:

  < af:commandToolbarButton actionListener = "#{bindings." Delete.Execute text}"="Remove"binding =" #{backingBeanScope.backing_Home.ctb2} "id ="ctb2">"

  < af:showPopupBehavior popupId = "p8" / >

  < / af:commandToolbarButton >

  Popup:

  < af:popup binding = "#{backingBeanScope.backing_Home.p8}" id = "p8" > "

  < af:dialog binding = "#{backingBeanScope.backing_Home.d2}" id = "d2" title = 'Do you want to delete selected line?' titleIconSource = 'Remove a line' type = 'yesNoCancel"dialogListener =" # ""

  {backingBeanScope.backing_Home.DeleteConfirmation}"/ >}

  < / af:popup >

  Java class:

  public void DeleteConfirmation (DialogEvent dialogEvent) {}

  If (dialogEvent.getOutcome ()! = DialogEvent.Outcome.yes) {}

  return;

  } else {}

  try {}

  BindingContainer links = getBindings();

  String oprb = bindings.getOperationBinding("Delete").toString ();

  OperationBinding deleteBinding = bindings.getOperationBinding ("Delete");

  OperationBinding commitBinding = bindings.getOperationBinding ("Commit");

  Object result = deleteBinding.execute ();

  If (! deleteBinding.getErrors () .isEmpty ()) {}

  return;

  }

  Object commitResult = commitBinding.execute ();

  If (! commitBinding.getErrors () .isEmpty ()) {}

  return;

  }

  return;

  } {} catch (NullPointerException only)

  System.out.println ("NullPointerException:" + no);

  } catch (Exception ex) {}

  System.out.println ("Exception:" + ex);

  }

  Here, I'm getting nullpointer exception on 'OperationBinding deleteBinding = bindings.getOperationBinding("Delete");'

  Please help me solve this problem...

  I thank in advance...

  Have you added to the page linking actions remove and commit?

• HP 15-af159nr: HELP need Network Controller, Win 7 64 bit, impossible to find, 15-af159nr

  For some reason I can't find a specific for this laptop network driver. Miss me the network controller and I tried so many drivers but can't find. Please if anyone can help that would be great! It is a win 7 64-bit, network controller driver, the hp 15-af159nr. It is the tactile energy star hp laptop.

  Hello:

  According to the list of parts for your laptop below, it comes with an adapter Broadcom BCM43142 802.11 b/g/n 1 x 1 Wi - Fi and BlueTooth 4.0 m2 combination WLAN.

  http://PartSurfer.HP.com/search.aspx?SearchText=P1A98UA

  These would be wireless and bluetooth, drivers that you need for this model of the wlan card.

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  File name: sp70888.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

• Help needed recovery for Equium A300D - 13 X

  Hi all

  Having experienced too many problems for the list with my satellite a 300 d 13 X, hardware and software, I decided to go ahead with a restore to the factory settings.

  My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  As far as I know, two recovery disks were created with success, insofar as the recovery disc creator has stated as such.

  Not knowing what step to take next, I started the laptop with the fist of the disc in the disc drive, two thinking recovery that it would reset the laptop to its factory settings, but it does not.

  Now, when I start the laptop, I get the following message;

  BOOTMGR is missing
  Press Ctrl + Alt + Delete to restart

  who restarts the laptop showing the above message again.

  By pressing F8 at start up does nothing.

  By pressing F12, multi boot selection, reveals a start with 3 options Menu;
  HDD1: TOSHIBA MK2046GSX-(S1)
  CD/DVD: MAST * ADVD-RAM UJ - 850 S-(PM)
  LAN: Marvell Yukon 88E8040T

  If I select the CD/DVD option, a black screen with the text;

  Windows is loading files

  is shown. I am guessing it is the correct path to recovery.
  However, after the screens following recovery about the language selection utility etc., a text filled with the dialog box

  X:\windows\systems32\cmd.exe

  Cross, but eventually reached a static state line:

  Copy of F:\06948XSP.swm to V:\HDDRecovery\SWImg 1/6

  without to successfully complete the recovery process.

  Any help to fix this would be greatly appreciated.
  Kind regards
  KeV.

  > My first step was to create 2 discs recovery DVDs, using the Toshiba Recovery Disk Creator.
  > As as far as I know, the two recovery disks have been successfully created, insofar as the recovery disc creator has stated as such.

  What to tell buddy you've done everything right.
  The recovery disk was created successfully (you saw a message saying this?).
  Boot from recovery disk should start the collection procedure and you must follow the installation on the screen.
  Usually, this should work.

  The error; BOOTMGR is missing says that boot manager on the HARD disk has been removed and it of not possible to boot from the HARD drive.
  You must boot from the CD you have done; by pressing F12 choose CD/DVD drive

  Try to format the HARD drive using another CD of Windows.
  In this case, you need to set SATA compatibility mode in the BIOS, then you could boot from the WinXP CD.

  After that try the recovery disk again

• HP Pavilion Notebook - 17-f207: Please help-need driver

  I need driver for

  HP Pavilion Notebook - 17-f207

  hardver id is:

  ACPI\VEN_ASD & DEV_0001
  ACPI\ASD0001
  * ASD0001

  Thanks for the help

  S

  Hello:

  I zipped and attached to the driver that you are interested in below...

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device ACPI\VEN_ASD & DEV_0001 who need the pilot.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

• Help needed interview about a series of Satellite Pro S500-C11

  Hello to all readers,

  Computer problem laptop Satellite Pro S500-C11 series.

  My wife, age 82, died last month. I have his cell phone in front of me with an apparent hardware failure. If I touch the bottom left of the laptop open, while entering text, the cursor jumps all over the screen and the text becomes garbled. I think my left hand wrist needs rest momentarily on the space to the left of the cursor buttons.

  I have some details on the purchase of the guarantee in the form of a contract number: FF5D900C with what I think is the registration number: 1 048 * H.

  The age related hearing problems I have trouble using the phone in an effective way. Is there anything I can communicate with the Service Center Online, please?

  Any help will be greatly appreciated.

  Hello

  Respect! Yet in sufficient form to use computers
  In General if your equipment begins to malfunction, the authorized Toshiba maintainer would be able to solve this problem.

  I don't know if you can contact the ASP mail, but first you must find the ASP in your country of m.
  Here you can find all of the ASP based all over the world:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  By the way: try to disable the touchpad while typing... you can turn off this Fn + F9 help
  In my case, the cursor jumped because I accidentally touched the touchpad while typing...
  Maybe it helps...

• Satellite 4090XCDT - Memory Upgrade help needed

  Hello reader,.

  I own a Toshiba Satellite 4090 XCDT notebook and it came originally with windows 98SE and 64 MB of ram, but I installed Windows 2000 pro and I need to upgrade the memory, I did some Google research on the specs of this laptop and found that this machine is capable of 192 MB of ram , but there is one memory slot, how is possible to get this upgrade when require sticks of memory 128 + 64 = 192 MB, that would mean I'd need two memory sticks to reach the range of 192 MB, from what I see here is therefore the only memory of memory bank.

  Could someone please point me in the right direction and provide me a solution to my problem, any help will be greatly appreciated.

  Cheers MagicBytes :D

  When the memory is empty, the amount of memory is reported?

  If its 64 MB, then you simply install a 128 MB module to achieve 192 MB

• Help needed-bad in compaq 6910p chart

  Dear friends,

  Need support & help, I have Compaq 6910p with Win xp-2, in my laptop there are a few question in graphics.there's background blue & all videos showing bad pixels, I format operating system, reinstall the graphics drivers + updated bios version F.19.if inti any good idea trying to help me...

  Thnks

  Hello

  also update video codecs

  Check external monitor - if everything's ok, this means that your screen is broken