Clarification of DIRT

Similar Questions

• Yesterday, I paid $29.99 thinking I was getting Grime Fighter, as I have some dirt, but he tells me that I don't have this feature, why the audit!

  Yesterday, I paid $29.99 thinking I was getting Grime Fighter, as I have some dirt, but he tells me that I don't have this feature, why the audit! What are the characteristics of fact fees cover $29.99

  Do you mean that Avast program: https://www.avast.com/en-us/grimefighter

  We can not probably help you with that here on the Firefox support site, but Avast has a page of support here: https://www.avast.com/en-us/support#grimefighter

• How to clean the dirt hard on coverage of the mac?

  Hello guys.  I have a mac here, which I use for work.  Hands may become very sales sometimes which is how dirt happens on my mac.  The cover of the screen, where the apple logo is, where it's the dirtiest.  I tried to clean it with a nonabrasive cloth with wet water, no luck there.  If I had to use my finger and keep rubbing, would come out a bit of dirt but that would take forever.  Anyone of you have a better solution on how to clean this rough dirt of my coverage?  Apple offered no use of solvents, sprays or abrasives to clean.  I would like to have the lid nice and clean without damaging the sweetness of the coverage.  Thanks for reading!

  You could spray a mist of iKlear on a cotton cloth.

  There have been reports of this iKlear damage some of the coating of screen initially on retina patterns-

  No report of it damaging the aluminum housing.

  http://www.KlearScreen.com/

• Satellite P200 - 1 K 9 - dirt inside the LCD screen

  Hello

  I have a problem with my screen, it works fine, but there seems to be a specification of the dirt of somekind inside the screen, it is not dead pixels because you can see them when the screen is off. another poster commented on this problem, but the response was not very helpful. any suggestions?

  And yes my warranty ran out. the laptop is a P200 - 1 K 9, about 3 years now and it is very annoying. about a dozen small spots around my screen, they look almost like chips little plastric, nothing more than 5 mm long, and in different directions. This laptop has never been anywhere except in and around my house.

  I put t know what kind of suggestions you want to read here.
  If you want to clean screen must be disassembled, cleaned and put together.

  Either ask the service to do this on the professional track and for costs or try to do it on your own including risk of damaging something.

  Out of curiosity, what kind of answers you have before?

• New Satellite A350 - dirt inside the LCD screen

  Someone at - experienced this kind of problem? The laptop is new (bought today). "Dirt" covers about 5 pixels (it is not regular) and looks like a gray shadow. Unfortunately, it is placed in a very bad place get my attention: /.

  I am sure that these aren't the dead/stuck pixels because I can see it even if the laptop is turned off. To be 100% sure, I did a picture of this 'anomaly' and when I Zoom I see that the pixels work correctly but there is a grey "smudge" above them. I want to download the pictures, but I left my cable somewhere elese.

  Can someone tell me if it is covered by the warranty or would I meet problems if I ask for a panel replacement for laptop / LCD monitor?

  Thanks in advance for answers!

  Post edited by: JustDidIt

  I agree with Akuma.
  If something like this happens it is certainly covered by the warranty and authorized maintainer can help you with this.
  Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good luck!

• Clarification on iMac 21 "memory

  Hi, I want to buy an iMac 21 "and I need a clarification on the configurable compared to the maximum memory at time of purchase. It is written in the configuration page "notes that the iMac 21.5 inches comes with 8 GB built-in memory to the computer." "If you think you may need in the future more memory, it is important to update at the time of the purchase, because the memory cannot be upgraded more later in this model. So I guess that means, if I purchase only 8 GB of memory, I'm stuck with it and I can't upgrade (add memory) later to 16 GB.

  BUT if afterwards I need different memory and I decide I need 16 GB, I can scrap (remove) 8 GB and install a memory of 16 GB instead? It is simply because I don't want to spend money for 16 GB if I'm happy with the 8GB...

  Thank you.

  No, you can't.

  (137939)

• Clarification needed Pavilion a1120n memory upgrade

  First time on the Forum, need for clarification after reading others entry and to collect the necessary information on the PC in question.

  HP Media Center Edition Pavilion a1120n

  Processor: Pentium 4 519 (p) 3.06 ghz

  Motherboard: Asus LRTP - THE (3 goldfish - GL8E) front bus at 800 mhz

  Will support maximum 4 GB of ram

  Unit is equipped with 4-240 pin Dimm, unbuffered, non - ECC 533/400 mhz sticks memory memory DDR2, dual channel architecture

  This office has 2-258 or 516 MB PC2 3200 DDR SDRAM OEM.  I opened the unit to check for this.

  OEM preloaded with Windows XP Media Center Edition.

  Now, most anyone looking at this request, probably why I'm wanting this on such an obsolete machine...

  I have bought new at the beginning of 2005, used the PC for a few months, remarried & it packed to move.  My husband had a Pavilion, so instead of having 2 running side x side, I copied my files in his unit, left (the most recent of the two) packed mine, thinking that we would need it down the road.  The road became long 7 years.  More to the story, but I'll spare you the pain. The only way I can use this material is upgraded to Windows 7 home & I need to increase the memory to install even.  It will be dedicated to the dissemination of music on the internet in the shop, period.

  Here are the complete specs for your HP Pavilion a1120n desktop and it is card mother PTGD - THE (Goldfish3). Please consider the purchase of 2 of the CORSAIR 2 GB Kit (2 x 1 GB) 240 pin DDR2 533 (PC2-4200) VS2GBKIT533D2 or 2 of the Crucial 2 GB kit (2 x 1 GB) DDR2-667 PC-5300 #CT475923 to bring your computer to the 4 GB maximum, it supports.

• Seeking clarification on the SFD in AKM Brushless Servo Drives

  Dear members,

  I'm looking for clarification on the smart feedback device (SFD) installed in the series of servomotors AKM. There is little information available on this subject in the specifications. It appeared that it offers a very high resolution, information on the position of the rotor high precision signals.

  1. how exactly is the PCG provides the position of the rotor?

  2. is there a provision to contract low resolution effect Hall of EPD type feedback?

  Thank you.

  Ansari07

  Hi Ansari07,

  I don't think that this level of control is possible with the AKD. The reader is supposed to close its own current loop on board for the control of switching and outputs of phase. The AKD offer couple, speed or modes of control position, and you can talk to it by Ethernet on the service port, via a field such as EtherCAT or CANOpen bus, or with an analogue signal +-10V or step/dir commands.

  I don't think you can get around all of the internal firmware in the AKD and get direct control of how current passes through the phases.

  Best regards

  Nate

• Detect dirt on a picture of the camera with Vision Assistant

  Hello

  I want to test a camerachip cleanliness.

  I tried to make a detector of dirt for a camera with Vision Assistant 2011 SP1 image.

  I modified the cell analysis of the Solution Wizard.

  My Vision Script is not able to detect any dirt pirate on the camera Image.

  Maybe you tips to optimize my other scrip alternative.

  You can use "Equalize IMAQ" (could be found in the service Table of the Vision Assistant research) right after you open the image to spread the histogramm on any bit depth.

  Christian

• access licenses client license Clarifications + Server 2012

  Hi all

  I need some clarification in licensing to provide the solution that is right for my customer.

  One of my clients purchased Dell server with preloaded Windows Server 2012 OS (Standard Edition) us (from my company) to replace the
  existing server that has windows Server 2003.

  Now, the thing is customer want to transfer/migrate their client access licenses Server and Terminal Server CALs for Server 2003 to 2012 server.

  But is it possible to transfer/migration of CALs client Server 2003 to 2012?

  In the case of is not possible.
  May I suggest Windows server 2003 to install as a virtual operating system in Hyper-V
  to use their existing CAL?

  And is it as additional permit is required to use Server 2003
  Hyper-V?

  Waiting for your valuable response/solution.

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• New W700 with dirt behind the glass of the screen - terrible support from Lenovo

  Hello

  I just got my new Thinkpad W700 two days ago, but it came with two dirt stains located behind the glass of the screen. They cover about 20 pixels down on the left:

  http://PIC.Leech.it/PIC.php?id=2873956ddirtbottom.jpg

  First of all, I contacted Lenovo technical support. They have opened a case but then gave me Lenovo sales because the defect already existed at the arrival and I could be eligible to get an Exchange unit.

  Unfortunately the sales of Lenovo really sucks. I spoke the first day by the representative asked me to send him an email with a picture of the screen, which I did. He promised to call what has never happened. I called again the next day and talked to another representative. He apologized for his colleague and promised to remind him to remember the same day. Once more it never happened. So I called for the third time another day later. The seller apologized once more and asked me to send the photo by email - once more. He then told me that I will not get an Exchange unit but have to call Lenovo support first, before any return policy may apply. Thus the circle closed after only three days

  Back to Lenovo support, they opened a new case and will now send me a shipping box in my notebook. So I'll be at least 15 working days without my new laptop and if they cannot clear the screen, I have to place a new order of complete replacement to Lenovo sales and wait another 10-15 days before I finally got my notebook back.

  This is completely unacceptable to me because I need the laptop for work. My plan of servo is now upgrade guarantee ' on site 9 x 5 next business day ', wait 2-3 weeks that it take until the upgrade is activated and then will make account again the fault to technical support. Can someone tell me if this would work or Lenovo will persist on me sending the DVICE back because I opened a folder already?

  Thank you

  OLAF

  The problem has been resolved. Unlike the unpleasant experience that I realized on sales of Lenovo doing the tech IBM/Lenovo service has been superb all the way. They have exchanged or repaired my screen and for some reason any addition to the system board. Now, I have a flawless screen and can start enjoying the machine. My laptop was gone for 5 days only, including a weekend and a delay of stock for parts.

  Bravo Lenovo.

  Edit: misspelling

• GFWL, I can log on to windows, but not in the game (dirt 2)

  GFWL, I can log on to windows, but not in the game (dirt 2).  It says 0 profiles found on the login screen right after you decide to use an existing LIVE account.  I'm under win xp, game dirt 2 and trying to connect to games for windows live.  my connection works for web browsing, etc.  grid works great multiplayer.  I went through and installed the gamers for windows_live program/client, I connected, created a new account, then restarted the pc.  I tried the two start the game by pressing 'home', which would direct me to registration in a nearly straight line on the door, and then when I hit the ' signine box, he would just sit there saying "Please wait" then that "loading" twirling which is graph would just turn and spin. and on the registration screen indicates "0" profiles found.   why it does not find my profile (recognize)?  Ive also tried going first games for windows live, then the game dirt 2 without result.  can someone please?      Thank you

  Oh, and I was able to download "Tinker" and am now play online!

  also in my games to the information page for windows network live while playing "handyman", it is said:
  I am not registered the internet ip address field and the link system address field says 'not active' and it also says I'm not connected on the field of upnp either.  None of this helps to explain?

  THANKS AGAIN FOR THE TIME SPENT TO HELP ME WITH THIS

  Hi Aceraceraced,

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is linked to the profile in the game of the dirt and would be better suited to the Windows Live games community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DIRT 2 Blue Screen of Death

  Hi all

  I recently bought Dirt 2 installed the game and im from the prblrms. As soon as I start playing the game, I get a blue screen of death. Attached are the details.
  BCCode: 18

  BCP1: 853CB6E0

  BCP2: 8770DAE0

  BCP3: 00000003

  BCP4: 00000001

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 768_1

  Bucket ID: 0x18_nt! ObDereferenceObjectDeferDeleteWithTag + 52

  Information about the server: 990e2c38-2a2a-42e5-8baa-eadb342eed43

  I'm not sure how to see what the problem is. I posted on the forums of DIRT 2, but without success. Please if possible can someone help me with this error and tell me how to fix this.

  Thanks have a great day.

  Name processor Pentium (r) Dual - Core CPU E6300 @ 2.80GHz

  Model G31M-S2L manufacturer Gigabyte Technology Co., Ltd.

  3070 MB total memory

  NVIDIA GeForce GTX 275

  GeForce GTX 275 video processor

  Manufacturer NVIDIA

  Name SB Audigy

  Reference of the manufacturer Creative Technology Ltd.

  SADexter,
  The BCCode: 18 is usually caused by a driver problem.  I would recommend that you update your drivers from the manufacturer of the equipment. Then go to Nvidia to check your graphics driver and make sure you have more current.  Can also update your other hardware drivers as well (sound, NETWORK card, chipset, etc...).
  He must also know which version of Windows you are using.  Check that Dirt2 is compatible with your operating system and your system meets its system requirements. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Clarification, pls. Any use of the SD card before update?

  Please do not use this as a cause of ranting, etc, but I need a simple clarification that I can't find clearly in any of the threads SD.

  If I understand correctly, an SD card is completely unusable now. For example, the files cannot be transferred here via a program such as Quick Office.

  Is this correct? It would be completely inaccessible as it sits.

  Thank you

  That is right. We expect a software update to enable it. at this time there is no support.

• MFP HP LaserJet Pro M126nw: Clarification of the use of HP Laser Jet MFP M126 nw Pro Page

  Hi support them.

  Recently, we bought a new HP Laserhet MFO M126nw Pro. The cartridge came with the new printer. I need a clarification of the HP Laserjet Pro MFP M126nw on the usage Page.

  We want to know how many pages that the printer has taken so far, printing and also how many pages is analysed and the copier took how many pages.

  I have attached the report using page for your reference.

  Please specify the things below.

  Pages for the scanned copy = 65

  I think he has counted only scanned copies 65.le is okay?

  2. What is Monochrome pages printed from copy = 66

  3. What is pages scanned host = 86

  4. print engine:

  1. total Impressions showing 829.

  Overall, I think it's showing printing, copier, 580 the scanned pages. Is this OK.

  2. What is jam events?

  It's showing 1.

  3. What is EconoMode Impressions?

  showing 0.

  4. What is monochrome prints?

  showing that 829

  Need to clarify the details above for my knowledge.

  Your support is much appreciated.

  Thanks in advance

  Concerning

  R.Pradeep

  the digital and print values are different.

  pages scanned copy 65 - this means that 65 pages have been executed by the scanner with someone using the copy function. the report shows 66 printed pages 'copy' which means 64 of these copies were only a single copy and 1 scan someone made 2 copies - which gives you a total of 66 pages printed from the copy function.

  pages scanned to accommodate 86 = that means 86 pages were executed by the scanner with a person who uses the "scan to network folder" or "scan to computer" function

  That's a total of total of 151 pages run through your scanner. only 2 values that you add to the scanner are the "copy" and «scan to host» numbers copy of 65 + 86 scan-to-host ='s 151 total scans

  total impressions are 829. pages printed from copy fuction are 66 - if you subtract 66 829 that gives you the number of pages that have been printed from a computer = 763

  763 pages printed computer + 66 pages printed using the copy function = 829 total number of pages printed