Clarification of EPMA on multiple UDAs on import using the ads file

Similar Questions

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Is it possible to choose Import in the DNG file only?

  I couldn't get any support or contact information, so I try to get an answer to my question, as follows, from here.

  Is it possible to choose Import in the DNG file only?

  I like to keep the disk space and the ability to remove unwanted jpg copies is unnecessary work for me a lot of your time.

  Then nobody knows where to send the program errors or suggestions for improvement?

  Thanks in advance

  You can also make sure that you don't have the following "Processing JPEG files" option to raw as separate photos selected. See the screen capture.

  

• Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them :(

  Why I get this error message when I try to import? 'The following files were not imported because they could not be read. (645)"I can see them

  Is working this morning!

  Depends on your operating system

  Go to google, try typing in

  Change the Windows permissions

  or

  Change the permissions of Mac

• using the xslt file import

  I have several XSLT stylesheets to generate PDF documents for each modules. These XSLT all use the same models (functions) for data formatting. I love having these models all in a single file to be imported / included in the specific XSLT modules. I can not the right way to import, xsl language are both located in the same folder.
  
  So far, I have:
  
  * & lt; xsl: import href = "file:CommonFunctions.xsl" / > * "
  
  I used the line above with and without the file, the path and everything else I could think of.
  
  The only way I can get this to work is to appoint the full path like this:
  
  * & lt; ' xsl: import href="file:D:\projects\toolA\include\templates\CommonFunctions.xsl" / >. *
  
  but this is not portable to other servers.
  
  Can someone clarify which way I have to use?

  Generally speaking, relative paths for web applications are specified against the of the web application that you use if you can try that.

• all export and import and the data files location

  Hi guys,.
  
  can someone please confirm...
  
  If I export the entire base and my X tablespace uses the loc * 1 data file * / test1.dbf, in the database where I matters now in the data file is in loc * 2 * / test1.dbf, it does make a difference and the data gets imported correctly, Yes?

  If I export the entire base and my X tablespace uses the loc * 1 data file * / test1.dbf, in the database where I matters now in the data file is in loc * 2 * / test1.dbf, it does make a difference and the data gets imported correctly, Yes?

  No, it makes no difference and the import of the data correctly.

• Bad import of the xml file?

  Hi friends,
  [Apps R12]
  I did a test OAF page and I downloaded the server with XMLExporter.
  Export seems to be OK:
  Run the command and the result:
  ------------------------------------------------------
  applications of Java oracle.jrad.tools.xml.importer.XMLImporter /opt/oracle/appl/mycompany/12.0.0/java/xx/ak/demosimple01/simpleTablePG.xml rootdir - /opt/oracle/appl/mycompany/12.0.0/java - username username-password appspass - dbconnection ' (description = (address_list = (address = (community = tcp.world) (protocol = tcp)(host=myhost) (port = 1521))) (connect_data = (sid = MYSID))) ".
  
  Import the file ' / opt/oracle/appl/mycompany/12.0.0/java/xx/ak/demosimple01/simpleTablePG.xml ' as ' / xx, ak, demosimple01, simpleTablePG.
  
  Import is complete.
  ------------------------------------------------------
  After that, have a look at the JDR_PATHS table, I see:
  NOM_CHEMIN PATH_DOCID PATH_OWNER_DOCID PATH_SEQ PATH_XML_VERSION PATH_TYPE
  
  75760 75759 DOCUMENT 1.0 - 1 simpleTablePG
  75759 75758 PACKAGE - 1 demosimple01
  75758 75757 PACKAGE - 1 AK
  XX 75757 PACKAGE 0-1
  ------------------------------------------------------
  I created the page function and associated with a menu.
  In the function definition: OA.jsp?page=/xx/oracle/apps/ak/demosimple01/simpleTablePG
  When I clicked on the link to access, it appears to the error screen with:
  
  Error at the top of the newspaper:
  oracle.apps.fnd.framework.OAException: Application: DNF, Message name: FND_NO_REGION_DATA. Chips: BOUNDING is/xx/oracle/apps/ak/demosimple01/simpleTablePG;.
  
  And below, in the part of the exception error:
  Exception:
  oracle.adf.mds.MetadataDefException: unable to find the component with an absolute reference = / xx/oracle/apps/ak/demosimple01/simpleTablePG, XML Path = null. Please check that the reference is valid and the definition of the component on the file system or in the MDS repository.
  
  Any ideas?
  I guess that's something of relatively to the path... whare are the files, but... I don't know what it could be...
  
  (the .class files are in $JAVA_TOP/xx /...)
  
  Thank you!
  Jose L.

  Hi Jose l.,

  Go to the C:\xxxx\jdevbin\jdev\bin\ in the order confirmation, then run the following:

  import c:\jdeveloper\jdevhome\jdev\myprojects\xxxx\oracle\apps\per\xxxx\webui\XXXXPG.xml username - apps-past XXXX rootdir - c:\jdeveloper\jdevhome\jdev\myprojects - dbconnection ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = XXXXXX)(PORT = XXXX))) (CONNECT_DATA = (SID = XXXXX))) ".

  Also read this thread...

  Re: How to import xml Pages

  Thank you

  -Anil

• Eloqua Contact Import using the APi REST in bulk does not work.

  Hello

  I'm following the 'EloquaBulkApiDocumentation' of importing contacts in Eloqua using bulk REST API. But I get the error message. I have exactly according to the JSON content that mentioned in the books.

  REMAINS first call - /api/bulk/2.0/contacts/imports/

  {

  "name': 'example of importing Docs."

  'fields': {}

  'C_FirstName': '{{Contact.Field (C_FirstName)}}.

  'C_LastName': '{{Contact.Field (C_LastName)}}.

  'C_EmailAddress': '{{Contact.Field (C_EmailAddress)}}.

  },

  "identifierFieldName": "C_EmailAddress",

  'isSyncTriggeredOnImport': 'false. '

  }

  Second call REMAINS for data:

  {

  'element':]

  {

  "FirstName": "Juan."

  'Name': 'Garcia ',.

  'emailAddress': " " [email protected] "" "

  },

  {

  "FirstName": "Tatiana"

  "Name': 'Smirnov."

  'emailAddress': " " [email protected] "" "

  }

  ]

  }

  Third, called for synchronization:

  17. here is my id of the list I got rest first Call.

  {

  'syncedInstanceUri': ' / contacts/import/17 "»

  }

  Concerning

  Chrystel.

  Here are the details of the journal:

  " < response xmlns =" https://secure.P03.Eloqua.com/API/bulk/2.0/syncs/4/logs ">

  < number > 8 < / count >

  < hasMore > false < / hasMore >

  elements <>

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.0870000Z < / converted >

  < message > managed to convert file 2014-06-23 T 22-30 - 22_User27_2f3ed1c87d33418f91205d7daee640b8.json (0 KB) with json converter. < / message >

  information < gravity > < / gravity >

  < statusCode > ELQ-00104 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.1370000Z < / converted >

  < message > field (C_FirstName) is a part of the import definition, but not included in the file. < / message >

  < Gravity > warning < / gravity >

  < statusCode > ELQ-00121 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.1370000Z < / converted >

  < message > field (C_LastName) is a part of the import definition, but not included in the file. < / message >

  < Gravity > warning < / gravity >

  < statusCode > ELQ-00121 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.1370000Z < / converted >

  < message > identifierFieldName (C_EmailAddress) must be contained in the fields, if specified. < / message >

  error < gravity > < / gravity >

  < statusCode > ELQ-00112 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.1370000Z < / converted >

  < message > field (element) is not part of the import definition and will be ignored. < / message >

  < Gravity > warning < / gravity >

  < statusCode > ELQ-00111 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.1500000Z < / converted >

  < message > there is no fields mapped into the file 2014-06-23 T 22-30 - 22_User27_2f3ed1c87d33418f91205d7daee640b8.csv. < / message >

  error < gravity > < / gravity >

  < statusCode > ELQ-00127 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.1500000Z < / converted >

  < message > there was a processing error import. < / message >

  error < gravity > < / gravity >

  < statusCode > ELQ-00107 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < e >

  < number > 0 < / count >

  < converted > 2014-06-23T 22: 31:25.1370000Z < / converted >

  < message > trying to unlock the file 2014-06-23 T 22-30 - 22_User27_2f3ed1c87d33418f91205d7daee640b8.csv on import for user 27 17. File has been unlocked. < / message >

  < Gravity > warning < / gravity >

  < statusCode > ELQ-00110 < / statusCode >

  < syncUri >/synchronization/26 < / syncUri >

  < /e >

  < / object >

  < deadline > 1000 < / limit >

  < offset > 0 < / offset >

  < > 8 totalResults < / totalResults >

  < / answer >

  Hi all

  I fix the problem by changing the demand for DATA service of rest. It should be like this:

  [

  {

  "FirstName": "Martin",

  'Name': 'Joseph',

  "" "emailAddress": "[email protected]"

  },

  {

  "FirstName": "Sophia"

  'Name': 'Selly ',.

  "" "emailAddress": "[email protected]"

  }

  ]

  Concerning

  Chrystel.

• Add multiple records using the UTL file

  Hi, I have rarely treat PLSQL so any help would be greatly appreciated.

  I need to run a query that selects all instances where the status of a column table

  is equal to true and then write this to a file on the operating system. It is fine if there is only a single disc, but often, there will be multiple records.

  My script file UTL to process 1 plug is as below:

  
  DECLARE
  L_HANDLER UTL_FILE. TYPE_DE_FICHIER;
  vData VARCHAR2 (85);
  
  BEGIN

  
  SELECT THE STATE
  IN vDATA
  Of error_table;
  L_HANDLER: = UTL_FILE. FOPEN ('MYDIR', 'error.txt', 'W');
  UTL_FILE. PUTF (L_HANDLER, VDATA);
  UTL_FILE. FCLOSE (L_HANDLER);
  END;

  
  Thank you very much

  Adam

  Hi, Adam.

  One way is like this:

  DECLARE

  L_HANDLER UTL_FILE. TYPE_DE_FICHIER;

  BEGIN

  L_HANDLER: = UTL_FILE. FOPEN ("MYDIR", "error.txt', 'W');

  FOR (IN) r

  SELECT THE STATE

  Of error_table

  )

  LOOP

  UTL_FILE. PUTF (L_HANDLER, r.status);

  END LOOP;

  UTL_FILE. FCLOSE (L_HANDLER);

  END;

  There are more effective ways, but they are much more complicated.

• First Pro 7.2.1 - no sound after the AVCHD import using the media browser

  I tried the procedure here to import content in the AVCHD format in Prime Minister even copy all the contents of the SD card with the folder structure on the hard drive, but still not get any sound when you drag the clips into a sequence
  Video and audio glitches. AVCHD video

  So far I tried uninstalling and re-installing, I do not know how to check for conflicting codecs.

  The clips play with its media player / Director

  What I read on other forums, this is a bug that has already been fixed and I wouldn't have to implement some of the workarounds I've seen using 3rd party software or transcoding.

  Any ideas what can go wrong here?

  You leave the ' Audio compliant ' processes complete before trying to play/edit images in order? Should see progress bar in line at the bottom right of the creation screen.

  Please let us know what the clips are the camera, someone might know a question specific to this sequence, as all AVCHD is not the same.

  Thank you

  Jeff

• In LR5 import window, the Panel file that was on the right-hand side has disappeared from handling.  How can I get that back?

  The Management Committee of the files on the right side of the window to import LR5 disappeared.  How can I get this back?

  Lack of panels/Modules - Lightroom Forums

• No noise imported with the mts file

  I have a paid subscription to CS6 version. I try to import a mts file but no audio only appears in the panel mounting. It worked perfectly yesterday. I can listen to excerpts in bridge without problem. I can read with vlc player without problem. What is going on

  No problem. I didn't get your suggestions as insults. It's just Murphy's law struck just when I needed to do something. I didn't know about the card. It's a PNY Pro 16 GB. I did download and reinstall and now everything works fine. I really do thank you for your time and your input.

• import of FP using the iak file

  We can add a fieldpoint system to a project using the click right-> New-> target or device-> fieldpoint. This will scan the ports com for a device, and once added, let me drag - move a channel.

  Fieldpoint (large) unit has already been plugged on the test bench, and that it is impossible for me to add the fieldpoint to the project that I described above. I do however, have a file iak for units and so I am able to export channels of this or MAX fieldpoint somehow?

  Second, there are 15 units on the bus and as far as I know, using the palette fieldpoint (photo) I can't

  (a) communicate only one channel at a time, and

  (b) the VI will open the channel, read/write and close the bottle. Is it possible to open all channels in the initialization, then use tell datasocket read / write, and close all references on shutdown?

  

  Ed,

  Glad to hear that worked.  There seems to be some minor differences between 8.2 and 8.6 as to how files of .iak are recognized in a project.

  ____________________________________________________________________________________________________________________

  Second, there are 15 units on the bus and as far as I know, using the palette fieldpoint (photo) I can't

  (a) communicate only one channel at a time, and

  ____________________________________________________________________________________________________________________

  Most of the modules will allow you to read/write all channels at the same time.  You can also create custom groups of channels in a module if you wish.  http://digital.NI.com/public.nsf/allkb/86AD45702FF1E71986256B4300644E45

  I hope this helps.

  (b) the VI will open the channel, read/write and close the bottle. Is it possible to open all channels in the initialization, then use tell datasocket read / write, and close all references on shutdown?

  Not sure where you're headed with this question.  You can use datasocket, but it is slow, with a lot of overhead.  I tend to stick with the FP Read and Write FP.  Here is a link to a tutorial that best describes what happens during a read/write public Service operation, I found.  http://zone.NI.com/DevZone/CDA/tut/p/ID/3346

• write the multiple value series buffer using the structure of the case

  In this VI, I am generating waves by using the sliding bar. After that I compare it to a value as 0.6. If the value of wave is higher than 0.6 then led flashes and structure case written 1 value serial buffer. If it is less than 0.6 became led off and structure written case value 0 in the stamp series. now, I want to add another condition if the chart value is between 0.2 to-0.2 written structure case 2 series buffer value. can you tell me how can I do this?

  
  

• Issue of multiple Disqualification tasks that use the same snapshot

  Details of the environment

  ======================

  Disqualification Version: 12.1.3.0.0

  
  

  A snapshot has been created in which the WHERE clause is outsourced and this snapshot table is used in a data quality process.

  Since there are different values passed to the WHERE clause, different jobs who have their own data quality process, but these process reads from the same snapshot table.

  Disqualification does not allow execution of different tasks that uses the same shot to run at the same time.

  Job1 is in operation, job2 throws an exception that the snapshot is locked.

  Any reason why Disqualification has this restriction? Processes are just doing a read on the snapshot table operation, so I was wondering why it was necessary to lock the object.

  We have more than 60 jobs that use the same snapshot and it would inhibit scalability if we are forced to run 60 jobs in sequence and not allow them to run in parallel.

  Can you advice how to fix this problem?

  The short answer is that each task must be executed with his own label of execution. Otherwise, each work is actually being run in the same context, and you will have problems of blocking.

  Please read on the labels of the execution and run profiles in the online help.

  Note that when running with a label of execution, complete results are not written; you need to decide exactly what to write work featuring the views of results you need. All data staged (including the snapshot itself) will be written with a label execution context and you can view the results in the Console of the server. Director will only show the results of the last run.