Clarification of the Etrecheck

Similar Questions

• Seeking clarification on the SFD in AKM Brushless Servo Drives

  Dear members,

  I'm looking for clarification on the smart feedback device (SFD) installed in the series of servomotors AKM. There is little information available on this subject in the specifications. It appeared that it offers a very high resolution, information on the position of the rotor high precision signals.

  1. how exactly is the PCG provides the position of the rotor?

  2. is there a provision to contract low resolution effect Hall of EPD type feedback?

  Thank you.

  Ansari07

  Hi Ansari07,

  I don't think that this level of control is possible with the AKD. The reader is supposed to close its own current loop on board for the control of switching and outputs of phase. The AKD offer couple, speed or modes of control position, and you can talk to it by Ethernet on the service port, via a field such as EtherCAT or CANOpen bus, or with an analogue signal +-10V or step/dir commands.

  I don't think you can get around all of the internal firmware in the AKD and get direct control of how current passes through the phases.

  Best regards

  Nate

• MFP HP LaserJet Pro M126nw: Clarification of the use of HP Laser Jet MFP M126 nw Pro Page

  Hi support them.

  Recently, we bought a new HP Laserhet MFO M126nw Pro. The cartridge came with the new printer. I need a clarification of the HP Laserjet Pro MFP M126nw on the usage Page.

  We want to know how many pages that the printer has taken so far, printing and also how many pages is analysed and the copier took how many pages.

  I have attached the report using page for your reference.

  Please specify the things below.

  Pages for the scanned copy = 65

  I think he has counted only scanned copies 65.le is okay?

  2. What is Monochrome pages printed from copy = 66

  3. What is pages scanned host = 86

  4. print engine:

  1. total Impressions showing 829.

  Overall, I think it's showing printing, copier, 580 the scanned pages. Is this OK.

  2. What is jam events?

  It's showing 1.

  3. What is EconoMode Impressions?

  showing 0.

  4. What is monochrome prints?

  showing that 829

  Need to clarify the details above for my knowledge.

  Your support is much appreciated.

  Thanks in advance

  Concerning

  R.Pradeep

  the digital and print values are different.

  pages scanned copy 65 - this means that 65 pages have been executed by the scanner with someone using the copy function. the report shows 66 printed pages 'copy' which means 64 of these copies were only a single copy and 1 scan someone made 2 copies - which gives you a total of 66 pages printed from the copy function.

  pages scanned to accommodate 86 = that means 86 pages were executed by the scanner with a person who uses the "scan to network folder" or "scan to computer" function

  That's a total of total of 151 pages run through your scanner. only 2 values that you add to the scanner are the "copy" and «scan to host» numbers copy of 65 + 86 scan-to-host ='s 151 total scans

  total impressions are 829. pages printed from copy fuction are 66 - if you subtract 66 829 that gives you the number of pages that have been printed from a computer = 763

  763 pages printed computer + 66 pages printed using the copy function = 829 total number of pages printed

• Clarification of the policy of startup SAN

  I would like clarification on the policy of SAN Boot. I was always under the impression that you were supposed to use the storage port WWPN. But what happens if you have many ports of storage from the table (16 for example), this is not possible.

  The purpose of this policy is to simply force the HBA to open a session in the SAN fabric?

  If Yes, can I use one of my real picture or just make one, correct?

  Since all zoning is done by the SAN switch (Brocade/MDS/Nexus) and LUN masking to the level of the table, I think putting the real WWPN to a storage port is not necessary.

  Thanks for any clarification.

  Yes, a 'false' WWPN will work and they connect to the SAN infrastructure... Photos attached show 2 ways to do this... However, if you install Windows 2012/Hyper-V, I suggest using WWPN valid because it seems not to be able to manage multiple ESX possible access paths when you first install...

  

  

• Need clarification on the ANSI joins

  Hi all
  
  I need some clarification on the ANSI join I am building to avoid an error when I try to run the same in standard join.
  
  With standard join, I get the error ORA-01417: a table can be external joined as another table.
  
  Regular join condition:
  Select null
  Of
  land_event_device_fraud dealer update,-T1
  land_event_device_upgrade T2, - New Subscriber first Set
  syn_intg_event_device_state T3, - subscribed existing
  land_event_device_upgrade T4 - new Subscriber Second Set
  WHERE T1.event_id = T2.event_id (+) AND T1.rate_plan_id = T2.rate_plan_id (+)
  AND T1.event_id = T3.event_id (+) AND T1.rate_plan_id = T3.rate_plan_id (+)
  AND T4.event_id = T1.event_id (+) AND T4.event_id = T1.rate_plan_id (+)
  AND T4.event_id = T3.event_id (+) AND T4.event_id = T3.rate_plan_id (+);
  
  -Get the error ORA-01417.
  
  Replaced the join above with ANSI join
  
  SELECT NULL
  OF land_event_device_fraud t1
  LEFT OUTER JOIN t2 land_event_device_upgrade
  WE (t1.event_id = t2.event_id AND t1.rate_plan_id = t2.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t3
  WE (t1.event_id = t3.event_id AND t1.rate_plan_id = t3.rate_plan_id).
  land_event_device_upgrade t4
  LEFT OUTER JOIN land_event_device_fraud t5
  WE (t4.event_id = t5.event_id AND t4.rate_plan_id = t5.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t6
  WE (t4.event_id = t6.event_id AND t4.rate_plan_id = t6.rate_plan_id);
  
  
  I want to know if the ANSI join is goig work properly or it will give me any Cartesian production information.
  
  Appreciate your help here.
  
  Thank you
  MK.

  Hello

  Maldini says:
  Hi all

  I need some clarification on the ANSI join I am building to avoid an error when I try to run the same in standard join.

  With standard join, I get the error ORA-01417: a table can be external joined as another table.

  Regular join condition:
  Select null
  Of
  land_event_device_fraud dealer update,-T1
  land_event_device_upgrade T2, - New Subscriber first Set
  syn_intg_event_device_state T3, - subscribed existing
  land_event_device_upgrade T4 - new Subscriber Second Set
  WHERE T1.event_id = T2.event_id (+) AND T1.rate_plan_id = T2.rate_plan_id (+)
  AND T1.event_id = T3.event_id (+) AND T1.rate_plan_id = T3.rate_plan_id (+)
  AND T4.event_id = T1.event_id (+) AND T4.event_id = T1.rate_plan_id (+)
  AND T4.event_id = T3.event_id (+) AND T4.event_id = T3.rate_plan_id (+);

  -Get the error ORA-01417.

  Replaced the join above with ANSI join

  SELECT NULL
  OF land_event_device_fraud t1
  LEFT OUTER JOIN t2 land_event_device_upgrade
  WE (t1.event_id = t2.event_id AND t1.rate_plan_id = t2.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t3
  WE (t1.event_id = t3.event_id AND t1.rate_plan_id = t3.rate_plan_id).
  land_event_device_upgrade t4
  LEFT OUTER JOIN land_event_device_fraud t5
  WE (t4.event_id = t5.event_id AND t4.rate_plan_id = t5.rate_plan_id)
  LEFT OUTER JOIN syn_intg_event_device_state t6
  WE (t4.event_id = t6.event_id AND t4.rate_plan_id = t6.rate_plan_id);

  You mix ANSI joins and the old joints. It's very confusing. Use all of one type or the other.
  >

  I want to know if the ANSI join is goig work properly or it will give me any Cartesian production information.

  What happens when try you it? Is it produces the results you want?

  Whenever you have any questions, post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data. Explain how you get these results from these data.
  Always tell what version of oracle you are using.
  See the FAQ forum {message identifier: = 9360002}

  Why the SELECT clause includes only NULL? Is that going to serve as an EXISTS subquery? If so, why bother to make the outer joins, and why do you care if it is a Cartesian product? What is the query to go for?
  For the purposes of debugging, you can include something that you see in the SELECT clause.

• Clarification of the DRS

  A clarification of the fast, if you don't mind.

  I have 3 groups of resources hung off root: high, normal, or low. There are 2 virtual machines within the high, 2 in the bottom and the rest are in normal.

  Each of the groups of resources have their limits and extensible settings the value 'Unlimited' and 'Yes' respectively. Is it the same as that of all virtual machines in the Normal group? i.e.There is without real time resource to go because whenever a group needs more resources, it is just what he needs of the parent (until, in the case of memory that the virtual machine has defined within its own parameters).

  Thanks for your comments.

  GlennBrett wrote:

  Each of the groups of resources have their limits and extensible settings the value 'Unlimited' and 'Yes' respectively. Is it the same as that of all virtual machines in the Normal group?

  It is effectively the same as that of all virtual machines in the resource pool root, unless you set actions on subordinate resource pools.

  i.e.There is without real time resource to go because whenever a group needs more resources, it is just what he needs of the parent (until, in the case of memory that the virtual machine has defined within its own parameters).

  There are ALWAYS resources planning going on! By defining "Unlimited" and "Expandable Reservation" you prevent resources covering before complete depletion of the system.

  Thanks for your comments.

  You are welcome!

  Ken Cline

  VMware vExpert 2009

  VMware communities user moderator

  Blogs about: http://KensVirtualReality.wordpress.com/

• Results of the EtreCheck report-Help

  Someone who knows how to read this report can help.  My computer is crashing randomly.  It is said that my performance is below average.  What can I do to make it better?

  Here's the report:

  EtreCheck version: 2.9.12 (265)

  Report generated 2016-06-18 07:00:41

  Download EtreCheck from https://etrecheck.com

  Time 07:05

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer restarts

  Description:

  restart the computer on its own

  Hardware Information: ⓘ

  MacBook Pro (17-inch, mid 2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 1

  1 2.66 GHz Intel Core i7 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 7

  Invalid battery 0123456789ABC serial number

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 512 MB

  Color LCD 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.5 (15F34) - time since started: about one day

  Disc information: ⓘ

  WDC WD10JPVX-00JC3T0 disk0: (1 TB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) Volumes/Recovery HD [recovery]: 650 MB (85 MB free)

  [redacted] Mac (disk1) /: 998,97 go-go (795,79 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 999.35 GB Online

  MATSHITADVD-R UJ-868)

  USB information: ⓘ

  MediaTek WiFi

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Applications/Parallels Desktop.app

  [loading] com.parallels.kext.hypervisor (11.2.0). 32581 - SDK 10.9 - 2016-05-04) [Support]

  [loading] com.parallels.kext.netbridge (11.2.0). 32581 - SDK 10.9 - 2016-05-04) [Support]

  [loading] com.parallels.kext.usbconnect (11.2.0). 32581 - SDK 10.9 - 2016-05-04) [Support]

  [loading] com.parallels.kext.vnic (11.2.0). 32581 - SDK 10.9 - 2016-05-04) [Support]

  / System/Library/Extensions

  com [loading]. Ralink.driver.RT2870USBWirelessDriver (5.0.1.25 - SDK 10.10 - 2016-06-02) [Support]

  Startup items: ⓘ

  WiFiUtilityStartUp: Path: / System/Library/StartupItems/WiFiUtilityStartUp

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 153 tasks Apple

  [operation] 67 tasks Apple

  [killed] 10 tasks Apple

  10 killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 153 tasks Apple

  [operation] 87 tasks Apple

  [killed] 5 tasks of Apple

  5 killed process lack of RAM

  Launch officers: ⓘ

  [failure] com.teamviewer.teamviewer.plist (2015-11-24) [Support]

  [failure] com.teamviewer.teamviewer_desktop.plist (2015-11-24) [Support]

  Launch demons: ⓘ

  [failure] com.adobe.fpsaud.plist (2016-06-13) [Support]

  [loading] com.charlessoft.pacifist.helper.plist (2015-11-16) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-24) [Support]

  [loading] com.teamviewer.Helper.plist (2015-01-15) [Support]

  [failure] com.teamviewer.teamviewer_service.plist (2015-11-24) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  WirelessUtility Application (/ Applications/Edimax Wireless Utility/WirelessUtility.app)

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  com [running]. Mediatek.RaConfig.63712

  [ongoing] com.etresoft.EtreCheck.188832

  [ongoing] com.getdropbox.dropbox.66592

  com.parallels.desktop.Console.53792 [loading]

  [loading] 389 tasks Apple

  [operation] 191 tasks Apple

  [killed] 13 tasks Apple

  Plug-ins Internet: ⓘ

  SharePointBrowserPlugin: 14.6.5 - SDK 10.6 (2016-06-16) [Support]

  FlashPlayer - 10.6: 22.0.0.192 - SDK 10.9 (2016-06-17) [Support]

  QuickTime Plugin: 7.7.3 (2016-05-27)

  Flash Player: 22.0.0.192 - SDK 10.9 (2016-06-17) [Support]

  Default browser: 601 - SDK 10.11 (2016-05-27)

  Safari extensions: ⓘ

  Open in Internet Explorer - Parallels - http://www.Parallels.com/fr/ (2015-11-17)

  3rd party preference panes: ⓘ

  Flash Player (2016-06-13) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  76% com.apple.WebKit.WebContent

  16% WindowServer

  16% com.apple.WebKit.Plugin.64

  9% com.apple.WebKit.Networking

  5% kernel_task

  Top of page process of memory: ⓘ

  3.79 GB prl_vm_app

  796 MB kernel_task

  Com.apple.WebKit.WebContent 328 MB

  Mdworker (15) 229 MB

  Safari of 106 MB

  Virtual memory information: ⓘ

  280 MB of free RAM

  used 7.72 GB RAM (384 MB Cache)

  563 MB used Swap

  Diagnostic information: ⓘ

  17 June 2016, 06:13:12 self test - passed

  Is slow when you exit Parallels too?

• Sudden Beachballing and slow computer: support the EtreCheck report

  Hello

  Slowing suddenly all applications including Finder and beachballing persistent. Ran DiskWarrior 5.0, but it persisted even after repair. EtreCheck report below: help appreciated interpretation.

  Thank you!

  EtreCheck version: 2.9.6 (256)

  Report generated 2016-02-25 10:27:31

  Download EtreCheck from http://etrecheck.com

  Time 05:19

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Beachballing

  Description:

  sudden beach balling even after repair disk Warrior

  Hardware Information: ⓘ

  Mac Pro (early 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  Mac Pro - model: MacPro4, 1

  1 2.66 GHz Quad - Core Intel Xeon CPU: 4 strands

  20 GB of expandable RAM - [Instructions]

  DIMM 1

  8 ok GB DDR3 ECC 1066 MHz

  DIMM 2

  8 ok GB DDR3 ECC 1066 MHz

  DIMM 3

  ok 2 GB DDR3 ECC 1066 MHz

  DIMM 4

  ok 2 GB DDR3 ECC 1066 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Video information: ⓘ

  NVIDIA GeForce GT 120 - VRAM: 512 MB

  Cinema HD Display 1920 x 1200

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - since startup time: less than an hour

  Disc information: ⓘ

  HL-DT-ST DVD - RW GH41N disk4: (6.08 Go))

  BD - RW PIONEER BDR - 209D)

  ST2000DX001 - 1 CM disk3 164: (2 TB) (rotation)

  EFI (disk3s1) < not mounted >: 210 MB

  DPGA hybrid 2 TB primary HD (disk3s2) /: 2,00 (1.68 free) tuberculosis

  Recovery HD (disk3s3) < not mounted > [recovery]: 650 MB

  WDC WD6400AAKS-41H2B0 disk0: (640,14 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Backup bootable WD 640 2 (disk0s2) HD / Volumes/WD 640 HD 2 bootable backup: Go 320,07 (2.34 GB free)

  X-plane (disk0s3) / Volumes/X-plane: 319,59 (Go 249,10 free)

  WDC WD6400AAKS-65A7B0 disk1: (640,14 GB) (rotation)

  disk1s1 (disk1s1) < not mounted >: 32 KB

  BP/Volumes/BP backup backups (disk1s3) backup backups billing billing: 320,07 (GB 311,51 free)

  Christine user folder backups (disk1s5) / Volumes/Christine user folder backups: 319,80 (Go 278,56 free)

  WDC WD1002FAEX-00Z3A0 disk2: (1 TB) (rotation)

  EFI (disk2s1) < not mounted >: 210 MB

  Hard drives DPGA Xeon Xeon DPGA/Volumes of HD (disk2s2) secondary: 999,35 go-go (522,93 free)

  Recovery HD (disk2s3) < not mounted > [recovery]: 650 MB

  USB information: ⓘ

  Plantronics DSP55 adapter

  Hub keyboard Apple, Inc.

  Apple, Inc. Apple Keyboard

  GASIA Semi. USB 2.0 HUB

  GASIA Semi. USB 2.0 HUB

  Logitech USB receiver

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Firewire information: ⓘ

  Iomega eGo drive HARD 800 - 800 max

  disk7s1 (disk7s1) < not mounted >: 32 KB

  disk7s2 (disk7s2) < not mounted >: 29 KB

  disk7s3 (disk7s3) < not mounted >: 29 KB

  disk7s4 (disk7s4) < not mounted >: 29 KB

  disk7s5 (disk7s5) < not mounted >: 29 KB

  disk7s6 (disk7s6) < not mounted >: 262 KB

  disk7s7 (disk7s7) < not mounted >: 262 KB

  disk7s8 (disk7s8) < not mounted >: 262 KB

  Iomega_HDD (disk7s10) / Volumes/Iomega_HDD: 319,94 go-go (316,11 free)

  OEM ATA Device 00 800-800 max

  EFI (disk6s1) < not mounted >: 210 MB

  OWC 750 FW hard drive (disk6s2) Volumes/OWC 750 FW hard drive: 749,81 go-go (566,03 free)

  Configuration files: ⓘ

  / etc/hosts - Count: 1

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  /Library/LaunchDaemons/BESAgentDaemon.plist

  A unknown file found. [Check files]

  Kernel extensions: ⓘ

  / Library/Application Support/Roxio

  com.roxio.TDIXController [no charge] (2.0 - 2015-09-05) [Support]

  / Library/StartupItems/BRESINKx86Monitoring

  com.bresink.driver.BRESINKx86Monitoring [no charge] (4.0 - 2014-01-13) [Support]

  / System/Library/Extensions

  com [no charge]. Cycling74.driver.WondershareAudioDevice (1.5.2 - 2016-02-24) [Support]

  com.Aliph.driver.jstub [no charge] (1.1.2 - SDK 10.7 - 2016-02-24) [Support]

  [loading] com.avira.kext.FileAccessControl (1.1.1 - SDK 10.9-2016-02-24) [Support]

  com.DYMO.usbprinterclassdriver.kext [no charge] (1.1 - SDK 10.5 - 2016-02-24) [Support]

  [loading] com.logmein.driver.LogMeInSoundDriver (4.1.58f51 - 2016-02-24) [Support]

  com.olympus.DSSBlockCommandsDevice [no charge] (2.0.0 - 2016-02-24) [Support]

  com.palm.ClassicNotSeizeDriver [no charge] (3.2.1 - 2016-02-24) [Support]

  com.usboverdrive.driver.hid [no charge] (3.0.1 - 2016-02-24) [Support]

  /System/Library/Extensions/USBOverdrive.kext/contents/plugins

  com.usboverdrive.driver.hid.safe [no charge] (3.0.1 - 2009-09-29) [Support]

  Startup items: ⓘ

  CDBurnerService: Path: / System/Library/StartupItems/CDBurnerService

  BRESINKx86Monitoring: Path: / Library/StartupItems/BRESINKx86Monitoring

  : Epson printer path: / Library/StartupItems/Epson printer review

  RetroRun: Path: / Library/StartupItems/RetroRun

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [loading] 164 tasks Apple

  [operation] 72 tasks Apple

  Launch system demons: ⓘ

  [failure] org.postfix.master.plist [details]

  [loading] 198 tasks Apple

  [operation] 89 tasks Apple

  Launch officers: ⓘ

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2015-10-20) [Support]

  [loading] com.adobe.CS4ServiceManager.plist (2009-06-08) [Support]

  [loading] com.avira.antivirus.general.agent.plist (2015-10-15) [Support]

  [loading] com.avira.antivirus.ipm.ui.plist (2015-10-15) [Support]

  [loading] com.avira.antivirus.notifications.agent.plist (2015-10-15) [Support]

  [loading] com.avira.antivirus.odscan.default.plist (2016-02-15) [Support]

  [loading] com.avira.antivirus.scheduler.agent.plist (2015-10-15) [Support]

  [operation] com.avira.antivirus.systray.plist (2015-10-15) [Support]

  [loading] com.avira.antivirus.telemetry.agent.plist (2015-10-15) [Support]

  [loading] com.avira.antivirus.update.default.plist (2015-10-15) [Support]

  [operation] com.avira.helper.avstats.plist (2015-10-15) [Support]

  [operation] com.brother.LOGINserver.plist (2015-03-12) [Support]

  [loading] com.citrix.AuthManager_Mac.plist (2013-10-22) [Support]

  [operation] com.citrix.ReceiverHelper.plist (2013-10-22) [Support]

  [operation] com.citrix.ServiceRecords.plist (2013-10-22) [Support]

  [operation] com.ecamm.iglasses3agent.plist (2015-09-08) [Support]

  [operation] com.epson.epw.agent.plist (2011-04-22) [Support]

  [operation] com.epson.eventmanager.agent.plist (2012-05-08) [Support]

  [loading] com.google.keystone.agent.plist (2015-12-15) [Support]

  [operation] com.logmein.logmeingui.plist (2016-02-18) [Support]

  [loading] com.logmein.logmeinguiagent.plist (2016-02-18) [Support]

  [loading] com.logmein.logmeinguiagentatlogin.plist (2016-02-18) [Support]

  [loading] com.maintain.LogOut.plist (2013-11-08) [Support]

  [loading] com.maintain.PurgeInactiveMemory.plist (2015-06-25) [Support]

  [loading] com.maintain.Restart.plist (2013-11-08) [Support]

  [loading] com.maintain.ShutDown.plist (2013-11-08) [Support]

  [loading] com.maintain.Sleep.plist (2013-11-08) [Support]

  [operation] com.maintain.SystemEvents.plist (2013-11-08) [Support]

  [loading] com.oracle.java.Java - Updater.plist (2014-01-13) [Support]

  [operation] com.wondershare.AllMyMusic.Agent.plist (2011-12-20) [Support]

  [operation] net.culater.SIMBL.Agent.plist (2011-07-01) [Support]

  Launch demons: ⓘ

  [performance]    BESAgentDaemon.plist (2015-11-04) [Support]

  [loading] com.adobe.ARMDC.Communicator.plist (2015-10-20) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2015-10-20) [Support]

  [loading] com.adobe.fpsaud.plist (2016-01-28) [Support]

  [failure] com.avira.antivirus.dbcleaner.plist (2015-10-15) [Support] [details]

  [failure] com.avira.antivirus.ipm.loader.plist (2015-10-15) [Support] [details]

  [operation] com.avira.helper.watchdox.plist (2015-10-15) [Support]

  [operation] com.backblaze.bzserv.plist (2015-06-26) [Support]

  [loading] com.barebones.authd.plist (2013-05-09) [Support]

  [operation] com.bombich.ccchelper.plist (2015-07-03) [Support]

  [operation] com.fitbit.galileod.plist (2012-10-04) [Support]

  [loading] com.google.keystone.daemon.plist (2015-12-15) [Support]

  [loading] com.logmein.logmeinserver.plist (2016-02-18) [Support]

  [loading] com.logmein.raupdate.plist (2013-10-23) [Support]

  [loading] com.maintain.CocktailScheduler.plist (2015-06-25) [Support]

  [loading] com.maintain.HideSpotlightMenuBarIcon.plist (2015-06-25) [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist (2016-01-19) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

  [loading] com.oracle.java.Helper - Tool.plist (2014-01-13) [Support]

  [failure] com.starfield.backupservice.plist (2014-04-11) [Support]

  [loading] jp.co.canon.MasterInstaller.plist (2016-01-14) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.ARM. [...]. plist (2011-06-01) [Support]

  [operation] com.backblaze.bzbmenu.plist (2016-02-25) [Support]

  [failure] com.ecamm.printopia.plist (2010-12-02) [Support] [details]

  [operation] com.google.Chrome.framework.plist (2016-02-25) [Support]

  [loading] com.shirtpocket.backupbytime.plist (2016-02-12) [Support]

  [loading] com.spotify.webhelper.plist (2013-07-10) [Support]

  [loading] jp.co.canon.Inkjet_Extended_Survey_Agent.plist (2012-12-03) [Support]

  [loading] uk.co.markallan.clamxav.clamscan.plist (2015-09-10) [Support]

  [loading] uk.co.markallan.clamxav.freshclam.plist (2015-09-10) [Support]

  [loading]    A spot of Apple

  Items in user login: ⓘ

  Reminders application (/ Applications/Reminders.app)

  BusyCal application (/ Applications/BusyCal.localized/BusyCal.app)

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  [performance]    N4RA379GBW.com.BusyMac.busycal2.alarm (2016-02-15)

  com [running]. Growl.GrowlHelperApp.4473312 (2014-01-13)

  [operation] com.apple.xpc.launchd.oneshot.0x10000004.EtreCheck (2016-02-20)

  [operation] com.brother.utility.NETserver.154592 (2015-08-01)

  [operation] com.brother.utility.USBserver.153952 (2015-08-01)

  [operation] com.busymac.busycal2.50592 (2016-02-15)

  [ongoing] com.DYMO.pnpd

  [operation] com.evernote.EvernoteHelper (2016-01-20)

  [operation] com.getdropbox.dropbox.63072 (2016-02-23)

  [operation] com.google.Chrome.67872 (2016-02-23)

  [operation] com.hp.devicemonitor (2016-01-06)

  Plug-ins Internet: ⓘ

  AdobePDFViewerNPAPI: 15.010.20059 - SDK 10.8 (2016-02-23) [Support]

  Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-24), [Support]

  GarminGPSControl: 3.0.1.0 Release - 10.4 SDK (2011-07-26) [Support]

  AdobePDFViewer: 15.010.20059 - SDK 10.8 (2016-02-23) [Support]

  EPPEX plugin: 10.0 (2015-04-09) [Support]

  LogMeInSafari32: 1.0.935 - SDK 10.7 (2013-03-12) [Support]

  WidevineMediaOptimizer: 6.0.0.12757 - SDK 10.7 (2014-06-09) [Support]

  googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]

  Scorch: 6.1.0 (2010-04-23) [Support]

  iPhotoPhotocast: 7.0 (2009-01-14)

  DYMO Safari Addin: Unknown - 10.4 SDK (2012-03-02) [Support]

  QuickTime Plugin: 7.7.3 (2016-01-20)

  FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-24), [Support]

  CitrixICAClientPlugIn: 11.8.2 - SDK 10.7 (2013-10-22) [Support]

  DirectorShockwave: 12.2.3r183 - SDK 10.6 (2015-12-03) [Support]

  npDDRia: 0.0.14.3 - 10.9 SDK (2015-02-05) [Support]

  PDF Browser Plugin: 2.4.4 - SDK 10.6 (2012-03-13) [Support]

  CANONiMAGEGATEWAYDL: 2.1.0.1 (2006-04-20) [Support]

  CANONiMAGEGATEWAYLI: 2.1.0.1 (2006-04-20) [Support]

  Musicnotes: 1.18.8 (2010-09-20) [Support]

  LogMeIn: 1.0.935 - SDK 10.7 (2013-03-12) [Support]

  Silverlight: 5.1.40416.0 - SDK 10.6 (2015-05-20) [Support]

  Web of Google Earth plugin: 6.0 (2011-05-17) [Support]

  DYMO NPAPI Addin: 1.0 - 10.4 SDK (2012-03-02) [Support]

  Default browser: 601 - SDK 10.11 (2016-01-20)

  Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2014-03-11) [Support]

  o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]

  SharePointBrowserPlugin: 14.6.0 - SDK 10.6 (2016-01-14) [Support]

  JavaAppletPlugin: Java 8 66 update build 17 (18 / 01 / 2016) check the version of

  User Plug-ins internet: ⓘ

  CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]

  WbeTools64_14: 1.0.23.53 © 2013 - SDK 10.6 (2014-04-11) [Support]

  fileEditTool64_15: 1.0.35.65 © 2013 - SDK 10.6 (2014-04-11) [Support]

  Safari extensions: ⓘ

  Supported (2014-10-02)

  iTube Studio (2013-12-11)

  3rd party preference panes: ⓘ

  Backblaze backup (2015-06-26) [Support]

  Flash Player (2016-01-28) [Support]

  Flip4Mac WMV (2014-03-11) [Support]

  Growl (2014-01-13) [Support]

  Java (2016-01-18) [Support]

  MySQL (2010-06-05) [Support]

  USB Overdrive (2012-05-17) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  DPGA Xeon hard disks: drive size: 999,35 GB disc used: 476,41 GB

  Destinations:

  HD WD 640 3 [Local]

  Total size: 640,00 GB

  Total number of backups: 2

  An older backup: 2.11.13, 00:04

  Last backup: 5.14.13, 12:43

  Backup disk size: too small

  Backup size 640,00 GB < (disc 476,41 GB X 3)

  Top of page process CPU: ⓘ

  MDS 47%

  8% osascript

  8% mds_stores

  Master of 3%

  2% Google Chrome Helper (13)

  Top of page process of memory: ⓘ

  2.10 GB Google Chrome Helper (13)

  1.18 GB kernel_task

  778 MB mds_stores

  Mdworker (25) 696 MB

  307 MB postbox-bin

  Virtual memory information: ⓘ

  7.66 GB of free RAM

  12,00 GB used RAM (6.41 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  February 25, 2016, 10:26:49 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102649_[redacted].crash

  /Applications/Avira.app/Contents/MacOS/avlogwriter

  February 25, 2016, 10:26:31 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102631_[redacted].crash

  February 25, 2016, 10:26:21 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102621_[redacted].crash

  February 25, 2016, 10:26:19 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102619_[redacted].crash

  February 25, 2016, 10:26:10 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102610_[redacted].crash

  February 25, 2016, 10:25:52 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102552_[redacted].crash

  February 25, 2016, 10:25:41 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102541_[redacted].crash

  February 25, 2016, 10:25:31 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102531_[redacted].crash

  February 25, 2016, 10:25:29 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102529_[redacted].crash

  February 25, 2016, 10:25:20 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102520_[redacted].crash

  February 25, 2016, 10:25:01 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102501_[redacted].crash

  February 25, 2016, 10:24:53 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102453_[redacted].crash

  February 25, 2016, 10:24:48 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102448_[redacted].crash

  February 25, 2016, 10:24:40 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102440_[redacted].crash

  February 25, 2016, 10:24:20 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102420_[redacted].crash

  February 25, 2016, 10:23:51 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102351_[redacted].crash

  February 25, 2016, 10:23:49 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102349_[redacted].crash

  February 25, 2016, 10:23:40 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102340_[redacted].crash

  February 25, 2016, 10:23:20 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102320_[redacted].crash

  February 25, 2016, 10:23:09 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-102309_[redacted].crash

  February 25, 2016, 10:15:53 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101553_[redacted].crash

  February 25, 2016, 10:15:34 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101534_[redacted].crash

  February 25, 2016, 10:15:24 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101524_[redacted].crash

  February 25, 2016, 10:15:15 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101515_[redacted].crash

  February 25, 2016, 10:15:13 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101513_[redacted].crash

  February 25, 2016, 10:15:04 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101504_[redacted].crash

  February 25, 2016, 10:14:41 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101441_[redacted].crash

  February 25, 2016, 10:14:31 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101431_[redacted].crash

  February 25, 2016, 10:14:21 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101421_[redacted].crash

  February 25, 2016, 10:14:12 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101412_[redacted].crash

  February 25, 2016, 10:14:10 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101410_[redacted].crash

  February 25, 2016, 10:13:48 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101348_[redacted].crash

  February 25, 2016, 10:13:39 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101339_[redacted].crash

  February 25, 2016, 10:13:25 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101325_[redacted].crash

  February 25, 2016, 10:13:10 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101310_[redacted].crash

  February 25, 2016, 10:13:08 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101308_[redacted].crash

  February 25, 2016, 10:12:50 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101250_[redacted].crash

  February 25, 2016, 10:12:40 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101240_[redacted].crash

  February 25, 2016, 10:12:38 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101238_[redacted].crash

  February 25, 2016, 10:12:20 /Library/Logs/DiagnosticReports/avlogwriter_2016-02-25-101220_[redacted].crash

  25 February 2016, 10:06:10 self-test - spent

  February 25, 2016, 09:29:29 ~/Library/Logs/DiagnosticReports/Dragon Dictate_2016-02-25-092929_ [redacted] .crash

  com Dragon.Dictate - Applications/Dragon Dictate Dictate.app/Contents/MacOS/Dragon

  24 February 2016, 16:14:43 /Library/Logs/DiagnosticReports/BESAgent_2016-02-24-161443_[redacted].crash

  /Library/BESAgent/BESAgent.app/Contents/MacOS/BESAgent

  24 February 2016, 15:52:43 /Library/Logs/DiagnosticReports/BESAgent_2016-02-24-155243_[redacted].crash

  February 23, 2016, 15:56:13 ~/Library/Logs/DiagnosticReports/Preview_2016-02-23-155613_[redacted].crash

  com.apple.Preview - /Applications/Preview.app/Contents/MacOS/Preview

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Understand the EtreCheck report? Run slowly.

  My end of 2013 that MacBook Pro with the retina has turned very slowly as the end. weird late of internet development, I lose power on the mouse, I can't click on anything whatsoever, etc.. I made this EtreCheck, but I'm not familiar with how to interpret these things. Help?

  
  

  EtreCheck version: 2.6.6 (226)

  Report generated on 17/12/15, 12:33

  Time 01:38

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Pro (retina, 13 inches, end of 2013)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Pro - model: MacBookPro11, 1

  1 2.4 GHz Intel Core i5 processor: 2 strands

  4 GB RAM not extensible

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 109 - SN = D864526T5X3FVN7AB

  Video information: (Does that mean?)

  Intel Iris

  Color LCD 2560 x 1600

  Software: (Does that mean?)

  OS X El Capitan 10.11.1 (B 15, 42) - since startup time: less than an hour

  Disc information: (Does that mean?)

  SD0128F SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) / [Startup]: 120,12 (Go 12.23 free) (weak!)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: (Does that mean?)

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / System/Library/Extensions

  com.seagate.driver.PowSecDriverCore [no charge] (5.2.6 - 10.4 SDK) [click for support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.6 - 10.4 SDK) [click for support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.6 - 10.5 SDK) [click for support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.6 - 10.4 SDK) [click for support]

  Launch system demons: (Does that mean?)

  [operation] com.seagate.TBDecorator.plist [click to support]

  Launch officers: (Does that mean?)

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [click for support]

  [loading] com.google.keystone.agent.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.ARMDC.Communicator.plist [click to support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist [click to support]

  [loading] com.adobe.SC.FPFeedbackService - 1.0.plist [click to support]

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.ea.origin.ESHelper.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [loading] net.cloudpath.HelperTool.plist [click to support]

  User launch officers: (Does that mean?)

  [operation] com.spotify.webhelper.plist [click to support]

  Items in user login: (Does that mean?)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Flickr Uploadr Application (/ Applications/Flickr Uploadr.app)

  Other applications: (Does that mean?)

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.EtreCheck

  [ongoing] com.getdropbox.dropbox.4192

  [ongoing] com.Yahoo.flickrmac.47712

  Plug-ins Internet: (Does that mean?)

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  Default browser: Version: 601 - SDK 10.11

  NPI3GManager: Version: Unknown - 10.6 SDK [click for support]

  Veraport: Version: 1.0.5.0 - SDK 10.7 [click for support]

  AdobePDFViewerNPAPI: Version: 15.009.20077 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.235 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.41105.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.235 - 10.6 SDK [click for support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  npXecureMacuxNPPlugin: Version: 1.0.5.11 [click to support]

  AdobePDFViewer: Version: 15.009.20077 - SDK 10.8 [click for support]

  nProtectNetizenNPI: Version: Unknown [click for support]

  SharePointBrowserPlugin: Version: 14.5.8 - 10.6 SDK [click for support]

  DirectorShockwave: Version: 12.1.9r160 - 10.6 SDK [click for support]

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  Safari extensions: (Does that mean?)

  PIN button

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Paragon NTFS for Mac® OS X [click for support]

  Dashboard Seagate for Mac OSX [click for support]

  Time Machine: (Does that mean?)

  Mobile backups: WE

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 120,12 GB disc used: 107,90 GB

  Destinations:

  Her External Hard Drive [Local]

  Total size: 2.00 TB

  Total number of backups: 13

  An older backup: 06/02/14, 18:55

  Last backup: 05/11/15, 20:51

  Size of backup drive: Excellent

  Backup TB 2.00 size > (disk size 120,12 GB X 3)

  Top of page process CPU: (Does that mean?)

  37% finder

  8% WindowServer

  3% kernel_task

  1% fontd

  1% iconservicesagent (2)

  Top of page process of memory: (Does that mean?)

  Kernel_task 468 MB

  Mdworker (14) 209 MB

  Ocspd 115 MB

  Dropbox 106 MB

  WindowServer 106 MB

  Virtual memory information: (Does that mean?)

  588 MB RAM free

  3.42 GB used RAM (1.11 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  December 17, 2015, 12:27:15 Self test - passed

  December 15, 2015, 14:46:38 ~/Library/Logs/DiagnosticReports/The Sims 4_2015-12-15-144638_ .crash [deleted]

  December 14, 2015, 21:52:07 ~/Library/Logs/DiagnosticReports/suggestd_2015-12-14-215207_[redacted].crash

  Just in time (I'm on):

  1. I would like to uninstall the Seagate dashboard (with the uninstall program): counterproductive and do nothing for you that OSX doesn't already.

  Restart after you have uninstalled that.

  2. If you need not Paragion NTFS, uninstall it.

  3. you are a little low on Ram, so avoid games when possible.

  4. see if it is possible to make more free space on your disk: 12 GB is very low for one SSD: 25 GB of free space would be really good to speed things up.

  5. I propose to look at Safari-> Preferences-> Extensions: do you need the extension Pin it?

  6. the same for the startup-> library disk-> Internetplug-ins: which can absolutely not miss: take all the others.

  Lex

• Need a Clarification on the installed component and run Simulator Configuration

  Help!

  I need clarification on what the plugin Eclipse is telling me. There are two parameters that are confusing me. For components installed (found under preferences/Window/BlackBerry JDE/Installed Components), I have a choice of 5.0.0 4.7.0,4.6.1, 4.6.0 4.5.0 and 4.3.0.

  Depending on which component I select when I go in the tab Configurations.../Simulator/course walk, I see a different mix of devices.  In all cases, there is a default Simulator.

  Initially, I assumed that each JDE component supports a mixture of different devices, and that is it compiled correctly, I would be assured that the app would work for all devices on the tab run Simulator Configuration.  In my tests, I found theopposite.  I also assume that, for each component of the JDE, there is a 'default' Simulator that was representative of all devices in the drop-down list run Configuration Simulator.  In my tests, am not sure what actually represents the Simulator 'by default'.

  Can someone clarify how to JDE and Configuration simulators run installed interact and a developer show how to ensure that their application is running on a mix of devices?

  When I finally get to the point where I am ready to deliver, what are the points of decision of installation?  Is it enough to simply require a specific version of an operating system (for example 4.7?) or do I have to create a grid and check the two model number and version of the operating system?

  Thanks for your help.

  "currentT shipping Curve 8330 come with OS 4.5" - they must be, as far as the carrier released a version 4.5.

  "Your statement that most consumers do not upgrade surprised me too" - only I support!  You might get a different opinion of someone else.  But the question is why would?  And our world app downloads indicate that he is did not upgraded phones out there.

  "I guess you are right in this assumption of statementI you are right in this statement"

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  "If there is some Curve 8330 there running 4.5 OS, it's a configuration supported." - correct

  "Construction of the 4.3 OS will be one where the menu appears in the upper right and the built 4.5 OS will be one where the menu is out."  Sounds good

• I would like to seek clarification on the muse.

  Hello everyone I would ask for clarification on muse.

  ( 1 ) can I connect Muse for wordpress?

  ( 2 ) only use Muse exclusively for do the page layout of my blog, then Uninstall and manage everything by wordpress?

  Hello

  To answer your questions:

  1 Please refer to the following link Re: I want to know the Muse can export to Wordpress?

  2. Yes, you can.

  Kind regards

  Aish

• Clarification of the use of form Distribution process in Acrobat

  Hi all

  I have a question. I did the whole distribution of Adobe Acrobat form. I already sent to 100 respondents. The problem is do I stand-by to my box in the email client and double-click on each of the mail attachments to fix on my answers PDF? I don't think so. If this is the case, then I think that this is not a very effective way of collecting data of your respondents.

  If I have however is to save the PDF back file with my parts and like an import batch to my PDF answer, should I make it a point to rename all my PDF files as all files have the same name, and this in turn will eventually replace all my data files? This isn't a very convincing method, am I right?

  Some clarification would be appreciated!

  See you soon!

  You can do anyway. Multiple responses with the same file name will not be a problem for the PDF answers, but you will obviously not be able to place several similar names files in the same folder to be added later in the answer file.

  An alternative is to collect responses on Acrobat.com.

• Presario SR1400IL: need clarification in the motherboard for windows 7 Home basic system installation

  Dear support,

  We have a computer desk pc Compaq Celleron. Model No.Presario SR1400IL, Celeron 2.6 GHZ, 256 MB DDR RAM, 40 GB drive HARD, Motherborad MS - 6577, Version 4.1.This pc is having windows XP home operting system.

  We want to install windows 7 Home Basic Operating System.

  My question is that if this pc will support and install operating systems Windows 7 Home Basic Edition. We of the original licese of the Windows 7 operating system. We want to install Windows 7 Home basic System [operating system in Compqa Celleron computer.

  Please let me know that this pc will install and basic Windows 7 Home Edition support.

  Waiting for your reply at the earliest.

  Thanks in advance.

  Concerning

  Pradeep.

  It is not DDR3 or DDR2 even... it's the original DDR, just DDR PC2700 aka. PC3200 or DDR400 (same thing) also works

  

  One of the great debacle of recent years was when the industry was selling computers with 512 MB Vista. They have been slow and caused much of the poor reception for Vista. Windows 7 manages memory better than Vista and "work" on 512 megs, but there is nothing you want to try to use.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Clarification of the declarant

  I can't seem to find the exact answer to this so I wanted to ask you.  I point out to use to pass data from a primary loop a secondary loop for the secondary to make the operations of disk write loop.  I use the notification to cancel once I read, or periodically delete the notifier in anyway?  It's on an RT target, which runs 24/7-365.

  I thought actually just another question.  Lets say I have also several primary loops, calling the secondary loop.  Changing the answer to my question above?

  I've included a sample photo.

  
  

• Net M4110x - Net management and iSCSI. Clarification of the configuration steps. The documentation is at best ambiguous.

  Hi guys,.

  I'm having a lot of trouble to translate what I know PS6000 table to the new M4100x.  Here's what I'm building:

  

  I want my iSCSI traffic that is completely isolated from all other traffic, and I want to use the CMC network to run the Board.  It must be a simple configuration, but Dell documentation for which is worse than useless.  It confuses and everyone who's read it confuses.  Why is this?

  It seems that I should be able to assign the IP addresses of management using the MCC according to DELL:

  Step 1.  Initialize the storage

  * Once in the CMC right-click on storage open storage gui initialization.

  * Member name: MY_SAN01
  * Member, IP: 192.168.101.10
  * Member gateway: 192.168.101.254
  Group name: MY_SAN
  Group IP address: 192.168.101.11
  Group of Memebersip password: groupadmin
  * Password Admin group: groupadmin

  It sounds simple enough, and when I apply this I guess I will be disconnected my M4110x simply because it currently resides on a separate network (net 2 in the image above).  Now how to set up the IP address of my CMC (net0 in the picture above) network management?

  Step 2.  Set ip management port

  According to the documentation of Dell, I have:

  To set the management port:

  * Open a telnet (ssh) session on a computer or console that has access to the PS-M4110 range. The array must be configured beforehand.
   
  * Connect the PS-M4110 modules using the following racadm command: racadm Server 15 connect
   
  * Connect to the PS-M4110 array as grpadmin

  Once I am in:

  Activate the management controller ports using the following commands in the CLI:
  0 > member select MY_SAN01
  1. (array1) > eth select 1
  2. (array1 eth_1) > 10.10.10.17 ipaddress netmask 255.255.255.0
  3. (array1 eth_1) > upward
  4. (array1 eth_1) > exit
  5. (array1) > grpparams
  6. (array1 (grpparams)) > network management-ipaddress 10.10.10.17

  (array1 (grpparams)) > exit

  My interpretation is correct?  Now my questions:

  1. in step 2. SubStep 1 - How can I know what ethernet interface to use?  Step 1 automatically assume eth0?

  2. am I correct in using the same IP address for both step 2 - substep 2 and substep 6?  Or do I have to assign a different IP address for these?  10.10.10.18 maybe.

  3. step 2 - substep 6, it doesn't seem to be that a network mask is that correct?

  4. comparison of the ps6000e - I set up an IP address for each controller (so 2) and then assigned an IP address for the group.  It's 3 IP addresses.  For this M4110, it seems that I have only one controller.  Is this correct?  The specifications make a point that there are 2 controllers.  What happened to the IP address of the controller of the 2nd?

  CLOSE-UPS

  I intend on building a VMware cluster using the algorithm of multiple paths of DELL and I built it to the DSC, but a technician Dell put in place the table initially and have not set up a dedicated management port.  Required configuration routing traffic on the net iSCSI management.  It is not recommended, and I don't want to set up this way.

  Currently, he is a blocking problemand I need to go beyond this ASAP.  I work with a large system integrator in Texas and plan on the order that these systems built this way on their part.  This means that I must be able to explain to them how to proceed.  This issue is standing in the way of progress, and I really hope I can get a satisfactory response from this forum.  Thanks for any helpful answers.

  I think I have the answers to my own questions:

  1. YES.  Step 1 automatically assume eth0.  There are TWO Ethernet interfaces and eth1 is disabled by default, and unless you use step 2 to set the management port this second Ethernet interface is never used.

  2. No. I can't use the same IP address for both lines.  In lower level 6 I need to use a different IP address on the same network 10.10.10.18 would work fine.

  3. YES.  It is correct.  Lower level 6 assumes the network mask that I have included in the point 2.

  4. it's tricky.  There is NO WAY to configure Active/active on these tables.  There are 2 controllers, but one "still asleep," unless the other fails.  Actually, the IP address is assigned to an Abstraction Layer, it maintains.  When fails another controller "awakens" and just starting to accept traffic and it doesn't care what its IP address.

  Another point.  Now that my table is initialized and my interfaces are configured, I need to know what IP address to point my ESXi hosts for their storage.  Use the IP address of the group assigned in step 1.  It is 192.168.101.11 (there is typo in the original post).