Sudden Beachballing and slow computer: support the EtreCheck report

Similar Questions

• Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Hello

  For someone to really help him, it is important to give as much information as possible.

  You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?

  If it happened "yesterday" did you updated anything or whatever installed?

  Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?

  What TV card are you using and have you verified that this works correctly?

  If you get not a photo is the antenna in place properly?

  Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• How can I load my photoshop CS6 cd to a new Macbook that has no cd slot and does not support the cd drive external mac.

  How can I load photoshop CS6 on a new macbook, which doesn't have a cd slot and does not support the cd drive external mac? I have the original cd of the program.

  Jake

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• Why when using Microsoft Works and type the letters my cursor suddenly disappears and I type at the end or middle of another sentence?

  I was typing a letter when suddenly I hit in the middle of another paragraph (just did as I was typing this question!), why and when is it fixed? I asked the same question before and said "we are working on that." Well, FIX it!

  Hi anneemerson,

  1 are you facing this issue only when you use Microsoft works or with other applications too?

  2. you are using a laptop or a desktop computer?

  3. you are using a wired mouse / without wire/USB/PS2?

  4. have you tried to update the drivers for the mouse?

  You can try to reduce speed and other options for the mouse pointer or the keyboard.

  For more information about changing the mouse pointer settings, please visit the below given link:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  If the problem only occurs with works, you must validate your request in the forum Office for assistance:

  http://answers.Microsoft.com/en-us/Office

  Hope this information is useful.

• Sound stops and slows down after the installation of Microsoft Vista SP2

  Its malfunction after installing Microsoft Visa SP2

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  I have a HP laptop. downloaded Microsoft Vista SP! and SP2.  Since installing the sound stops and slows down and jump to the high state that Adobe Player slows down the computer.  I remember checking the updates in the control panel and Microsoft Vista SP1 and SP2 has been selected and windows poped place provided a specific that warning after installation of SP1 and SP2, respectively, the user can experience sound defects or.  This window also provided a specific procedure to correct the problem of noise; However, I have noticed no procedure to revisit this window.  Need help, thank you!

  Here's a thread on these forums on how to fix this: http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/f16247af-313a-418d-915e-6403012c25eb

• I installed the Version 7.0.1. on my laptop and desktop computer, but the home pages are different

  I was prompted to upgrade my portable version of Firefox to version 7.0.1. I did this and was very impressed with the new format of the home page with a single button for the menu bar address, etc. of bookmark. I decided to update my desktop computer the same version by downloading the last update, but when it was installed, the format of the home page was not the change to the new format. I decided to use the same installation file I had used on the laptop, but the format has not changed. So I'm puzzled as to why there are two results of different format using the same installation file. Does anyone know of a way to ensure the new format may be invoked on my desk?

  Click right on the toolbar or anywhere in this place... and not select menu bar...

  And your desktop and laptop computers running the same operating system?

• Send and track: it supports the digital signature by the beneficiaries, and will it work in a Citrix environment?

  I have a user to ask questions on Adobe send & Track.  His intention is to use it to send documents to subcontractors/suppliers for the signature.  This service works in such a way?  His thinking is that it will give them a link to go to and view the document where they can digitally sign/approve the document, and it will warn him that he is ready, allowing him to download the newly signed document to the Cloud.  Looking at the product page that I don't see anything specifically mentioning it and it looked like it would send them a link to the document where they can download it, but then they would need to sign it and email back to him. * UPDATE * I see that it seems the License Pack PDF supports the signature.

  Whether the service will work as hoped, is there a problem installing in a Citrix environment?  All of our users use Citrix XenApp to access their Outlook mailboxes, and I wanted to make sure the plugin could be installed and only visible for / usable by it (we would need to install the plugin on about 6 different servers in the farm, but it wouldn't be 'active' in his profile).

  Hey Joe,

  You can use the eSign service to accomplish the signature workflow you mentioned.

  eSign service, electronic signatures online, formerly EchoSign | Adobe Document Cloud

  Kind regards

  Rave

• Why my video game / its getting distorted and slowed down in the preview when imported?

  I am new to this program, but it seems powerful. However, I already got stuck before you begin to edit my video.

  Here all the information:

  I recorded a video of gameplay of Dead Space using Bandicam, a software similar to Fraps and used 48 kHz, 192 Kbps, 2 channels stereo settings for it.

  The video itself is in .avi format 1280 x 720, 59, 94fps (even if the framerate varies when I recorded the thing, between 40 to 70 Not really sure how this works but Windows tells me that his 59 fps.)

  

  The default setting of the sequence is:

  DVCPRO HD - 720 p - DVCPRO HD 720 p 60

  who uses 48 k as my video.

  I also tried notusing a sequence and just import the clip, but he gave the same results.

  

  When I play it back in VLC/Windows Media Player/MPC, it works fine, the audio and video flows as it did when I recorded it.

  Perfect. But when I import into first Pro CS5, it gets reworked in 11025hz somehow... and when I preview the he, of course, it sounds like shit.

  He is also very bad. Some sections have good framerate, others seem to operate at 10 frames per second.

  If the original file is obviously very good, however there something important in Premiere Pro.

  

  I tried all types of different parameters of the project and sequence settings, that seem to get the same result.

  I tried to check out the FAQ and the help document, but none of them seems to cover the 11025hz question... I also tried to search the forums, with no luck.

  I am at a loss on what to do, I would be very happy for any help. I'm sure it's something simple, I missed it mucks the import to the top somehow.

  Thanks for your attention!

  Linus

  Oh and by the way, my rig must be able to handle this.

  Intel Core i7 - 2600 K 3.4 GHz

  8 GB OF DDR3 MEMORY

  GeForce GTX 260

  2 TB drive 7200 RPM

  

  I checked the forums Bandicam and Bandicam features of an option (hidden) in the parameters of format that changes it a friendly format for Premiere Pro.

  Thank you Mr. Hunt at least try to help. Now, I'm damn happy! =)

  For the walkers of the search for the answer:

  

  Linus

• Service Pack 2 could not install, windows can not access the service install and slow computer

  Please help, I'm using Vista Home Premium 32-bit. I'm not very technical, and I think that my problems began some time ago when Vista Service Pack 2 Installation causing boot failure has failed and that I could not connect. I tried a fix by using the Startup Repair and was able to connect again, but now all my Vista updates since then do not install and now my computer is running extremely slow, constantly trolling.  I also have problems "windows service install could not have access. I have tried to reinstall Windows Installer 4.5 but says "update does not apply to my system. I also tried to unregister and re-register Windows install that does not work. When I try to 'upgrade' my installation disc vista, the option is not available. I think my computer is confused if it running SP1 or SP2. Also I can not install programs because of the installer, the service to publish a work around if needed. Thank you

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• LAPTOP SUDDENLY INRESPONSIVE AND SLOW

  Hello

  My laptop suddenly does plu and very slow.

  I've tried everything but still the same thing.

  My computer spec:

  Intel i5 processor

  RAM 4 GB

  Baracuda NVIDIA concerts 1.

  In the event you have already checked for virus/malware activity.

  He always turns slowly in a clean boot state? http://support.Microsoft.com/kb/929135

  Don't forget to reset back to normal after a repair to see if there is any conflict.

  http://Windows.Microsoft.com/en-AU/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Optimize Windows performance

• Fan noisy and slow speed for the Macbook Air with 10.11.4

  I hope you can help me.

  I upgraded 10.11.4 on my Macbook Air a couple of days. It is a model of 2013 Mid, 1.7 Ghz Core i7, 8 GB of RAM.

  I don't know exactly what my last update was - but was El Capitan any.

  I tried LANDAU and SMC resets.

  Previously, she has chugged along fine. The fan was quiet most of the time - only hit on when I used Lightroom.

  Now, the fan kicks on regularly, most of the time actually. And it's MUCH slower. Very lag sometimes when you type in Wordpress, for example. And lightroom is much slower. Also, when I use FaceTime, video often turns itself on and off--with a message informing me that it will resume when the computer cools down. Yet the back of the computer does feel not hot at all.

  I tried page of Chrome in Safari. Doesn't seem to help much.

  I am currently traveling to the Peru and did not my hard drive with my last backup, Time Machine, by hand, so as I understand it, I can't go back to a previous update.

  The Kernal task often seems to have a very high CPU %: 250 or.

  Right now, I'm trying to download the Combo, I read that this can sometimes fix glitches.

  Any help is greatly appreciated!

  The kernel uses excessive CPU cycles. Here are a few possible causes for the State. Some may not apply to you.

  FileVault

  Please, open the security and privacy pane in system preferences and click the FileVault tab. If there is an indication that the encryption or decryption is in progress, wait (possibly several hours) so he can finish and see if there is an improvement.

  Limitation of the

  When he does readings of high temperature in the material, or a MacBook battery low voltage readings, the kernel can try to compensate by interrupting the processor to slow them down and reduce energy consumption. This condition may be due to:

  ☞ an accumulation of dust on the logic board

  High ambient temperature ☞

  ☞ a defective battery or worn in a laptop

  ☞ the malfunction of a cooling fan, temperature probe, a probe or some other component voltage internal

  Note that if the problem is caused by a sensor, there can be no real overheating or undervoltage.

  If the computer is portable, try with and without the power adapter connected. If pigs kernel_task processor only on current alternative, load is causing the machine to heat up. This behavior may be normal for some models, but it can also be an indication of a hardware failure.

  Apple diagnostics or the Apple Hardware Test, although not very reliable, is sometimes able to detect a fault. For more in-depth material test, an appointment of 'Genius' to an Apple Store, or go to an other authorized service provider.

  If all goes well with the material, then everything that you can do to improve the cooling can help.

  Software installed

  The software installed by the user which includes a device driver or other kernel code can thrash of the kernel. This category includes virtualization, such as Parallels and VMware software, as well as products 'anti-virus' more commercial. Some system monitoring applications, like "iStat", may also contribute to the problem. You can test this possibility to completely disable or remove the software according to the instructions of the developer or start in safe mode. However, it should be noted that the deactivation of a modification of the system without removing or test in safe mode is not as easy as you think.

  Corrupt NVRAM or MSC data

  Sometimes, the problem is cleared up by resetting NVRAM memory or MSC.

  External display

  Connect an external display to some models of MacBook Pro while the lid is open can cause this problem. If necessary, use the external clamshell modescreen.

  Other devices

  Disconnect devices wired everything except those needed at startup and remove all the expansion cards of third parties (if your model.) If the problem is resolved, reconnecting devices one by one by one until you identify the culprit.

• El capitan and slower computer

  What would cause my macbook pro to run more slowly since the installation of el capitan? I am very frustrated and unhappy. I've upgraded only because it was held for the last update of itunes - I need for ipad new pro.  It is significantly slower in every sense - to save more slow and blocking at the close when I try to scroll through a document. My macbook pro is not too full at the moment.

  When slowing down

  Run and view the results here so that we know more about your configuration.

  EtreCheck

  Also, just what do you mean by slow?

  Rotation beach balls?

• Defective touchpad (Synaptics) and slow computer after extended use (memory leak)

  Two problems have been caused with my HP Split 2 x since I bought it 2 months ago:

  (1) the touchpad works sometimes for a few seconds, while the touchscreen still work OK.

  (2) the computer becomes slow after a while of use (which varies from a few minutes to a few hours usually). The Task Manager shows 98%-99% of memory, most of which use (3.6 GB / 4 GB) are not paged memory.

  I suspect the two issues are related to a faulty Synaptics driver, according to:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/envy-X2-non-paged-pool-memory-l...

  and http://forum.notebookreview.com/razer/731374-memory-leak-synaptics-driver.html .

  I did the same test as the second link with the same result: Open "Task Manager" (Ctrl-Shift-Esc), on the 'Performance' tab, select 'memory '. Note the value for "Non paged memory. If I move the touchpad, it increases to about 1 MB every 5 seconds. If I stop moving, the value remains constant.

  I use the preinstalled Synaptics driver, version 17.0.10.9 (Sep 06, 2013) for 64-bit 8.1 window.

  Everyone has the same problem, or use it without these issues?

  I would like to know if a restoration system or factory reset may fix.

  FINALLY!

  Microsoft has just released an update for Synaptics Driver, not thanks to HP which has not found a way to provide the possible Synaptics driver as an OEM update.

  Update Windows Update to Sypatics HD TouchPad two days ago, but I would not be allowed to install as it kept then mainly in giving the 800F0100 error Code. After some research on the Internet I could find that an installation manual after the WU has downloaded the driver would be possible.

  So I went to the Device Manager > mice and other pointing devices > TouchPad Synaptics HID > properties > driver > Update Driver > Browse my computer for driver software and shown the finger/windows/C:\Windows\SoftwareDistribution/Download and everything worked like a charm = D

  I have no more memory leak and now after SEVEN MONTHS I finally can use gestures that it was supposed to.

  But I still annoyed gel problems which in my case is a dysfunction between the screen and the dock.

  Just that you wanted the guys at Microsoft to know is the solution, not the HP that would have had if they have signed and put the driver since November last at our disposal. Blame it on you, HP.

  Leo

• Very slow computer after the latest updates

  Hello

  I've updated one of my PCs running Vista x 64 updates of security two days ago.
  Now that the systems takes more than 15 minutes just to start at the opening screen of session and as much time again to get on the desktop.
  The mouse cursor is always fast as usual, but everything else including the caret blink time is super slow.

  This is a really clean system which is used strictly for dedicated 3D work, so he has nothing but Max, EU3 and WinZip on it.  It is not used for Internet access.
  No hardware or software changes attempted in several months, other than updates Windows System.
  Intel C2Q Q6600, 8 GB 1066 RAM, NVidia 8800GTS 512, WD 500 GB HD, ASUS P5K mobo.

  I was wondering if anyone else has experienced this problem with updates, especially as it's really painful trying to solve the problems since that it literally takes hours to try whatever it locate either changes the problem.  I'll do a wipe and reinstall if I have to spend a lot more time with reboots, it will be faster.

  I am answering my own question here... :-)
  Maybe it will help someone else and save a few hours of work waiting for the slow start to fix things.

  For those who are interested: the OS is Vista Home Premium x 64. Material has been listed above. It is a high-end with hardware system high range, coolers, cases, power supply, etc.
  This is not a system of job full time, it is used only for specific work I usually do a few hours on one or two days a week.

  I timed it really starts the Welcome screen and it is more than 45 minutes. lol :-D
  I pulled off the side of the case and noticed that the HDD was just chewing on something.
  Start in safe mode was also just as painfully slow as standard start (argh).

  Regarding the updates of Windows, I have this system set to inform only, so I only install updates at the end of all the days that I work on the computer. Where my assumption that it's a matter of update that caused the problem, since nothing ever changes, on this subject - files are still saved out to a network server.

  However, once I could get on the computer, I noticed that I had also installed Windows Live Mail top the same day I did the updates of Windows (two days ago). WLM has been installed just to get a screenshot of it for my blog, it was never really used for Internet e-mail, it should be uninstalled some time on one of the next system bootups.

  Then... Installation apparently a combination of WLM or the latest Windows updates has completely borked something on the computer starts.
  I got my DVD of Vista, it started, ran the Startup Repair. Now, the system works very well. WLM has been uninstalled in the case where it has been part or all of the guilty.
  As with a PC, it could be something to do with the specific hardware and software configuration, the order of WLM and updates installed, specific updates installed, etc..

  I would recommend that anyone with a similar configuration be sure to install WLM or updates in the estate where they fall in the same question.
  Just don't panic if you have problems, try a DVD Vista Startup Repair. :-)

• Browser and slow computer

  I have a GT5404 Gateway Fund, and it is very slow. I had a friend through me Vista wondows 7 a few years ago and I think I messed with something because my computer is now the product key. I also run Norton and found a Trojan horse. I don't know how to solve my problems. A factory reset solve my problem of speed and remove the Trojans or viruses? Or reset it will move the Trojan horse for the new settings?

  Hi Kath,

  Thanks for posting the question in the Microsoft Community!

  You are facing performance with computer problems and you receive message to enter the product key.

  Performance issues may occur because of too many temporary files.

  To work with the issue, I suggest you follow the steps:

  Method 1:

  To work with the performance issue, refer to the site:

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=qEP1OL1ZNRH

  Note: When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:

   

  To remove any content malicious, perform a virus scan by using the Microsoft Safety Scanner.

  Visit the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

   

  To use the product key, go to:

  Activate Windows 7 on this computer

  http://Windows.Microsoft.com/en-AU/Windows7/activate-Windows-7-on-this-computer

  If you perform a factory restore, would be deleted all the programs and data in the computer and the computer would get on the State when it was introduced with the provider.

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.