Class selector from numbers?

Similar Questions

• Why a "ul" is placed at the beginning AND at the end of a class selector?

  I'm quite confused something.  I thought that a rule CSS selector for bulleted lists was written like this:

  . List ul li {}

  margin-top: 1px;

  float: left;

  etc...

  {

  But I see in places different, written like this:

  UL. List ul li {}

  margin-top: 1px;

  float: left;

  etc...

  {

  The difference being that a "ul" is placed at the beginning of all the class selectors unordered list, in addition to the 'ul' as a result of the selection.

  There must be a reason to make it in two places... I was wondering if someone could explain it to me.

  Your selector down, .list ul li, means (read from right to left):

  • a list item
  • inside or after a list unordered
  • inside or after a class element = "list"

  Your selector down, ul.list ul li, means

  • a list item
  • inside or after a list unordered
  • inside or after a list of unordered class = "list"

  In the first case, class = "list" could be assigned to ANY element, for example, a div or a li.

  In the second case, class = "list" is attributed mostly to an unordered list.

  The only time where it's the same rule is what class = 'list' is assigned to an unordered list.

  It is not necessary to repeat the ul to start both and inside the selection, but it is necessary if you want only a list item of the profile given in the second example above in style.

  Beth

• I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer.

  Original title: scams?

  I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?

  Continue to put the phone down. They are all crooks.

  They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.

• How to paste some data from numbers to some placeholders in the Pages using AppleScript and Automator?

  ​

  Hello AppleScript and Automator Pros!

  Unique ID	Elements	Quantity	Unit of measure	Sum, $	Color	Dark?
  1	Pencil	1	Agenda	90.50	P	Yes
  2	Pen	150	Agenda	300.23	THERE	NO.
  3	Pillow	2	Agenda	400.01	B	NO.
  4	Toy	114	Agenda	500.30	R	Yes
  5	Repair service	N/A	N/A	1.00	N/A	NO.
  6	Phone	98	Agenda	1986.10	W	NO.
  P = purple Y = yellow B = black R = red W = white

  It was an example of Document numbers

  
  

  Now the example of Document Pages

  [PH for Unique ID] - Ben got: [PH for element], [PH for quantity] [PH for unit of measure], [dark or not PH] [PH for color] for [PH for sum before the comma] $ [PH cents] c.

  When Ben had [PH for quantity] [dark or not PH] [PH for Color] [PH for item tiny first character and changeable if necessary end], he became happy

  Example 1: Allows you to take data from line with Unique ID 1 and that's what it takes to go:

  1 - Ben got: pencil, 1 point, violet dark 50 ° c for $ 90.

  When Ben had 1 Purple Pencil dark, he became happy

  Example 2: Now data row with Unique ID 3 and it is what to get:

  3 - Ben got: Pillow, 2 pieces, blue for $ 400 01b

  When Ben had 2 blue pillows he became happy

  Example 3: Now the data used to row with Unique ID 5 and this is what it takes to get:

  5 - Ben got: repair service, 1 service, for 1$ 00 c complete

  When Ben had 1 repair service complete, he became happy

  Here, I have to change given n/d of the table in numbers and replace quantity with 1 PH, PH for unit of measure with service (no point as in the previous examples) and the PH for color with plenty of example.

• How can I clear recent items from numbers in the Dock?

  When you go to numbers in dock and right click on it, it shows recent items for faster access, it does not only show recent Articles he is showing the older elements and is not updated to display recent items.  Does anyone know how to add an item to this list or remove an item from this list?  I have tried everything I can think of nothing doesn't.

  Try this:

  Numbers open, go: (menu) file > open recent > clear menu (at the bottom of the list).

  Numbers of quit smoking.

  On the dock, right click the icon of numbers and select delete in the Dock

  OR click the numbers and the slide out of the Dock, and then release the mouse button.

  Boost numbers from the dashboard, recent items in the Apple menu or by double-clicking its icon in your Applications folder.

  Right-click on numbers icon in the Dock, and then choose continue on the dock.

  Optional: Drag the icon to a different location on the dock if you wish.

  Kind regards

  Barry

• Shortcuts exhaust turned from numbers to letters

  My escape key used to lead to shortcuts - almost all were numbers - and after the update, I noticed that they have all the letters now.  I tried to import the key from another computer commands, but those don't seem to change.  Any ideas on how to change this back?

  Appreciate the help.

  You can not...

  The change was apparently connected logical, perhaps for a reason... because of the universal use of ESC in OS X change from full-screen to windowed applications these days... then mode, logical Devs probably changed to keep in the new guidelines for the design of application published by Apple, I think.

  See excellent plus Edgar explanation on the reasons that may explain why, here...

  WHY change digital for letters in 10.2.1?

  .. and like Edgar, I prefer the new workflow, now, I got used to it...

• Class derived from LabelField with custom font color, but when focus not only

  Hello

  I have some problems with the LabelField-derived class. I want it has customized color background and police, but only when it does not have focus.

  I tried to do the following:

  protected void paint(Graphics g) {
      if (isFocus()) {
          super.paint(g);
      }
      else {
          final int bgColor = g.getBackgroundColor();
          final int fgColor = g.getColor();
  
          g.setBackgroundColor(backgroundColor);  // from member
          g.setColor(fontColor);  // from member
  
          super.paint(g);
  
          g.setColor(fgColor);
          g.setBackgroundColor(bgColor);
      }
  }
  

  but the final effect is that this field has the custom until the first focus/unfocus font color. When I do not check the isFocus(), police have custom color when the field has focus too.

  Similar do in drawFocus (Graphics g, boolean on) does not solve the problem either.

  I target BB > = 4.6.0.

  Do you know how to do properly without calls drawText custom?

  Kind regards

  Piotr

  What happens if you replace

  If (isFocus())

  with

  If (g.isDrawingStyleSet (Graphics.DRAWSTYLE_FOCUS))

  and (maybe - I'm totally guessing here) substitute drawFocus doing nothing?

  BlackBerry GUI has many peculiarities, so you never know what path is right.

  A word of caution: most likely, you will have also to invalidate() field when it changes its "focused" State Don't do this in onFocus() / onUnfocus()! Those (especially the onUnfocus()) are not always correctly called (BB frame problem). Make your field implement FocusChangeListener and make these invalidations in the method focusChanged() (using setFocusListener (this) somewhere in the constructor).

• Editor settings online for the css class selector

  Hello

  We want to reduce the number of available classes in the css selector in the online editor.

  We followed the instructions on how to use the partner portal, i.e.

  1. go to the partner portal > tools > editor online settings.

  2. choose the site

  3. click on Apply Css Editor

  4 added the name of the class that I want to show my editor one by one.

  And the process is.

  But our settings have not taken effect.

  In fact, it removes all the classes of the selector.

  This implemented?

  Please help me

  Thanks in advance

  Projjwal

  I know this is an old post, but just in case anyone is wondering, if you add custom classes or IDs to the Publisher, they must also appear EXACTLY the same in your CSS to the template file. So, if you add the following to your classes online editor:

  .img-right

  left-.img

  You will need in your CSS:

  .img-left {}

  .img-right {}

  Otherwise, it will not be displayed. If they will NOT work:

  . Happy .img-left {}

  #post - 36 left-.img {}

  @media (min-width: 480px) {.img-left {}}

  Hope that helps.

• To access the properties of the class one from another

  Hello

  I have two clips on the stage at frame 1 and frame 2. Both are instances of classes. (They are not created dynamically, just their affair is set to their class names)

  I created soundChannel and sound objects in class 1 and I want to access it from class 2. (I want to stop the sound chain that was started in class 1)

  Is it possible to do this? If so, this will be true for other properties also?

  Thanking you,

  Chinmaya

  You want to stop the sound of the previous movieclip, right?

  You can do this by using SoundMixer.stopAll ();

  It stops all sounds in your SWF file. You can also start any sound later.

  The second approach is to do your "musicChannel' a global variable.

  To do that he report on a new layer which is empty and avialbale throughout the main time line and without pictures keys are there [with the exception of the first presence].

  now to access this variable, you can use a statement like below:

  (stage as MovieClip).musicChannel.stop ();

  If that also does not solve your problem then paste the code for the two classes, I'll look into it.

• I2C + class motor from examples of robotic controller

  I try to combine (i.e. to use together in the same project) the motor controller class used in "Starter Kit 2.0 Custom FPGA" with I2C of "Communication I2C - sbRIO" in the examples of the Robotics module.

  I have already combined the FPGA code in a single FPGA VI and have tested the two individually.  When I go to use them together, I can't use the same FPGA VI reference because one is designed using a FPGA VI reference in dynamic mode (engines) and the other uses an FPGA VI reference that isn't in dynamic mode (I2C).

  So, what should I do?  I was going to try to convert the I2C in dynamic mode, but the only way I'd be able to do is to open the FPGA reference in each Subvi (since I can't bind to a type in the dynamic mode definition).  It also looks like trying to convert each other would be a nightmare because it would require to change the classes also (which is a mystery to me).

  P.S. I have sbRIO-9632 (Starter to be transferred to a large robot Kit)

  Nathan_B. . I met the same problem, when I mixed the two codes.

  And the only way I found to resolve this problem, configure the device "FPGA" in dynamic mode, then create a control and change of the Subvi in relation to the 'I2C Protocol', with this command (replace the input and output of the 'Sub - VI' - reference fpga). In this way, I realize the work programme. (see attachment).

• Add a selector from a varied Module in a business process

  Hi all

  I created a Code based Manager (named "company") in the Module varied. I have been at the level of companies, and I put some data in the table map.

  Now I try to associate a data item for my new manager in a business process. Because I can not add a data switch (I can't choose my manager when I select the category in the data selector form), I discovered a piece of data named "Company Picker" automatic creation.

  But when I put this new data element in the contract management process, I got the error message: "< company Picker > field is not allowed in form < contract lines >.

  
  

  So here's my question: How can I associate a data element of a Code base on a business process manager?

  
  

  Thanks in advance for your answer.

  
  

  Thomas

  Hi Thomas,

  If I did not understand your question correctly, you were asking about how to choose a folder that was created in the Manager of Configurable?

  As I remember, when you create a Module varied, unify creates a selector for this varied Module, named by its ID. So when you create a CM with ID of CM20, you get "CM20 Picker" in the definition of fundamental data and create a piece of data as a result. When it is used on a form, you can then select all records created/added within the spreadsheet Module varied.

  It will be useful.

  Edwin

• Issue of class selector

  Hello

  Is there a way of Dreamweaver to apply a class to an element like this for example:

  . paragraphstyle.Orange

  The class in code view might look like:

  < class = "orange paragraphstyle" >

  The only way I can find to apply a class like this, is to manually add the code in code view that works, but is tedious.  It is not recognized in the class in the properties pane and will not appear here after I have it create as a new style.  Y at - it a faster way to apply it.

  Thank you!

  Apply several Classes is a new feature in Dreamweaver CS6

  http://helpx.Adobe.com/Dreamweaver/using/whats-new.html#id_85416

  In previous versions, the only option is to handcode it.

• Question from numbers in the stored procedure

  Hi all

  I have a problem to store numbers in oracle 11 g. I need the numbers without decimals and with decimal in my data table, I see this:

  1.1 (OK)

  1.2000000000000002 (instead of 1.2)

  1.3000000000000003 (instead of 1.3)

  1.4000000000000004 (instead of 1.4)

  1.5000000000000004 (instead of 1.5)

  1.6000000000000005 (instead of 1.6)

  1.7000000000000006 (instead of 1.7)

  1.8000000000000007 (instead of 1.8)

  1.9000000000000008 (instead of 1.9)

  2.000000000000001 (instead of 2.0)

  I am using this cfc:

  < procedure = "myDB.myPackage.updateTableA cfstoredproc" datasource = "mySource" > "

  < cfprocparam value = "" #arguments.myNumberValue # "cfsqltype ="cf_SQL_FLOAT">"

  < / cfstoredproc >

  In oracle, I have the myNumberValue parameter as a number data type.

  I try CF_SQL_DECIMAL and cf_SQL_NUMERIC, it does not pass anything.

  What type of sql are used in my stored procedure?

  Thank you

  Johnny

  I would use CF_SQL_DECIMAL, make sure just that you set the SCALE = "" attribute to dictate the number of decimal places to send. "

• Can CSS Class selectors apply to &lt; head &gt; objects?

  Hello

  I tried to apply the same piece of text < title > of each page and I was wondering if this could not be done with a CSS: before pseudo-element

  Title: front

  On a more general level, this kind of thing is possible for all < head > objects or is - it only works for things in the body of <>

  TIA,

  JC-

  No, you cannot apply classes, IDS, or what anyone in the head of the inline styles.

• Incoming calls from numbers not recognized blackBerry Smartphones

  One of my users has a problem on his 8310 that when it makes outgoing calls, people can see his number, but when people call him the call to the number does not appear.

  Where the problem could be, could this be related to service provider or device?

  Running 4.5 OS

  Ok! all is well now, the problem was on the side of the service provider, they had to allow CLIP to the user.