Class VCP and the issue of Certification

Similar Questions

• Option CMD in the name of the view and the expiration of certifications

  with the standard tools of Windows 7 (built in, absolutely no external except for PsExec suite, is it possible to get certification information from a local computer (or use of psexec, external machine) including the name and the date limit?) I really didn't need other information... This would be really useful if I could get a quick answer!

  Is not having to be cmd, I need to display the information remotely and thought I can't psexec in the remote control of the machine and pull this remote certification information.

  http://SS64.com/NT/certutil.html
  Seems to have a bit of information that I need, but I'm really not understand properly.

  One thing to note is when I run the command CertUtil - CredStore it is said:
  Credentials: 0
  CertUtil:-CredStore command completed successfully.

  I have 2 certificates in its current form; the comm server and that of my own certificate I had setup. If that helps...

  Hello Chad,

  The question you posted would be better suited to the TechNet support. I suggest you to check with TechNet support for more information.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=w7itpro&Forum=w7itprosecurity

• E/s and the issue of Communication for the sbRIO-9601

  Hello

  Our company is looking to use the sbRIO-9601 in an OEM application and I had two technical questions on the Board of Directors.

  (1) are the functions VISA support?  I saw there an RS232 port, I want to just make sure I can read/write easily out of it using prebuilt VI rather than do all the level low and starting from scratch.

  (2) we will be reading and writing of simple commands to a device coupled via the RS232 interface and based on the response, illuminating an LED controlled by the Board of Directors.  I have not selected any led and hoped that neither could provide some clarification on the limits of the power provided in the sbRIO-9601 user guide.  We will use the 3.3V output... I should put a resistor in line current limiting or I can put the diode directly between the output pin and the digital ground?  Us can drive more than 15 LEDs, however, we will never more than 3 see on at any given time.  I saw in the 3.3V section i/o of the documentation that the current max tested per channel is 3mA... but bus total is 330mA.  Is there a limit to how much we can provide each channel as long as we remain under the 330mA all together?

  Thank you

  Hi leachdor,

  (1) VISA functions are supported for the RS232 port on the sbRIO, so do not do any level low programming for them.

  (2) the maximum that we specify channel 3 is my.  You can combine several channels in parallel to increase this output up to 330 mA for the total bus.  Since you're only driving 15 LEDs and there are 110 channels of output, you should be able to combine some led.

• VScroll Bar and the issue of the tree

  I have a component of the tree and use a DataDescriptor custom, when I dynamically add data to the DataProvider, I have a set that does not show in the tree. When these items added, indicates VScrollBar. But as the elements are 'hidden' and do not appear in the tree, VScrollBar should not be displayed. If I develop an element in the tree, then VScrollBar will disappear and the tree will look like is it supposed to be.
  
  I tried to use (individually and in combination) invalidateSize(), invalidateDisplayList() and invalidateProperties() invalidateList() on the tree, but it isn't updated VScrollBar as it should.
  
  Any help would be greatly appreciated, thank you.
  
  Art

  In fact I found a solution to my problem and why it is showing the VScroll bar.

  In the DataDescriptor when my hidden objects are to be added to the collection, I am sending an event on the model (the event is the event to the collection of its kind add) and when the collection got this event it would update is the 'size' and then the tree thinks that his screen is larger than it really was and so VScroll bar. So I removed my expedition event if the collection would not last updated its "size".

  This fixed my problem, and I hope that this helps out you some Arun.

  Art

• Satellite L310D - Viruses and the issue of recovery

  My partner has a Satellite L310D, which recently is victim to the virus of windows security.
  We initially tried to restore to a previous restore point but he resurfaced after a few days.

  We then reinstalled windows from the recovery partition of the HARD disk which seems at first sight have been around but after opening explorere and surfing the net, it keeps us bombing with a windows error.

  Also, when you are in the google search, then clicking on a link, it will open additional search pages and refuses to open the link.

  Finally, he did not finish we updated windows and lifted up a windows error which we can not get rid of despite their support pages.
  I learn the virus can have dug in the registry but I thought the restoration of HARD drive would address this issue.

  If he touched the entire hard drive and how do I sort?
  We do not have an available recovery disk.

  Any help would be greatly appreciated that we cannot use it as it is. Apart from this, the machine was great for our needs.

  > If it has affected the entire hard drive and how do I sort?
  Well, a virus could affect the functionality of the system.
  Usually the antivirus software should be able to remove this but some viruses are really good and new OS install might be a better solution.

  If you don t have recovery disks (generally you must create it in the first day of the purchase of the laptop), then you could order it here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• with respect to its use and the issue of time to watch on the iphone 6 s

  Hi, I'm a bit confused about the use and timing standy on 6 s 16 gb iphone. so my request is as follows: -.

  1.) after charging my iphone 6 s, 100%, I use it non-stop Messaging on whats app, Yearbook, online, twitter, without interruption. However, I don't watch the videos on you tube. Also my opinion, all location-based services are turned on. so in this case when I use it non-stop, the battery is going for almost 8 hours. so, it is normal that the battery to last for 8-9 hours when the phone is used non-stop.

  Thank you...

  prospects for an immediate response

  PAL Mickey
  

  
  

  Hello

  It seems ok to make battery last another 2/3 hours go into settings

  Disable Apps refresh also Bluetooth so do not use.

  See you soon

  Brian

• ePrint record new user and the issues of access to Web Services

  In June, I registered the HP printer. Then, I went on the eprint site and registered an e-mail address there. After we have chaged the name of my laptop, the printer recognizes the laptop more (Macbook pro). After having tried everything, reset us the printer to factory settings and rebooted the configure everything again.

  The printer recognizes now my laptop, but I don't have access to web services more, nor the eprint works!

  Webserivces:can not access, it gives me an error message.

  EPrint:When I'll on-site eprint, it shows that you can see your eprint email address... Where? I can my address loging onlysee.

  There is not a single printer in my printer list... I can only add a printer, but when I try to add the printer, I only get error messages. Once I managed to get careful, but he toldme that email eprint was already taken (of course, it is taken, it's mine!)

  Unfortunately I do not know much about the MAC operating system, but you can check on hp.com/support to find out if there is a newer version drivers that may be compatible. On the question of e-mail address, you can add multiple printers to your ePrint account, but each printer would have its own e-mail address. I apologize that the restriction is there for your old custom address but it's to protect the customers to get emails sent to their printer that were not intended for them. (For example if someone was to have chosen your email address as soon as you have disabled web services).

• Personal and the issue of api payment methods Org

  Hi, we are setting up Payroll Canada and moving out of ADP. We have created a number of new payment methods Org and will have to pass the personal means of payment of all Canadian employees to new methods of payment org. It looks not to I can just update the existing personal payment with a new org_payment_method_id methods. The api, hr_personal_pay_method_api.update_personal_pay_method, doesn't have a parameter for org_payment_method_id. I don't see where I could go to an end date to existing staff pay method from effective_end_date is an out parameter. Is the expected solution to remove the existing payment method and create a new one with the new method of payment org id?

  Thank you

  Ellen

  Hi Ellen, I can understand why you want to be able to do this in the way you describe, but at the same time I think that I understand why you can't actually. Given that the mode of payment org pretty well tells the system account to pay, it would be quite important do not alter who 'accidentally '. You need deadline personal remuneration methods 'old' first (via hr_personal_pay_method_api.delete_personal_pay_method), but later, it should be a relatively simple matter to recreate each set of account details against the new org payment method. Just if you make postings as you proceed make sure, treat you the end-dating back to the old and creating the new as a unique validation unit - and if one of these calls API fails for an assignment, then roll it all back for this assignment. This is especially true if you have all the assignments with payment methods 'split '.

  It would also end date the former use of payment method org on each of the affected payroll, warns one accidental use later. If I remember correctly, the system won't let you do that, unless there is no method of active personal 'old' pay beyond the date of the purpose necessary.

  Hope this helps,

  Clive

• illegible codes in the form of planning and the issue of re-encoding

  Hi experts,

  I implement planning 11.1.2.3 with EPMA, Unicode mode. Here, we had a few problems.

  1.illegible codes in the comments of the form.

  When I right click in any cell shape and some comments, I can put comments. If we put the English that will be fine, but if we put the Chinese, the first element of comments (not first character) will appear in unreadable codes. We have tried many times and found the following regularity.

  • The first comments that we put in Chinese aura of unreadable codes, the other (the third second\ and so on) Chinese comments are right
  • If leave us the comments entry status, then right-click and select comments once again, the first comments that we put this time will again be unreadable codes. (Perhaps in the same cell we had already put a few comments before)

  2. re-encoding problem

  In planning EPMA mode, if we set one member of scenario (perhaps other sparse dimension as well) dynamics and two passes that would cause an error: cannot retrieve the data to no response. She is the example:

  Account: (dense)

  A1 (Dynamic)

  -A101

  -A102

  Scenario: (Sparse)

  Real

  Budget

  S1 (Dynamics, two assists), formula: actual/Budget;

  We need the A1-> S1 = A1-> real/A1-> Budget, NOT of A101-> S1 + A102-> S1;

  So we should set S1 as two right passes?

  But if so put us and deploy and refresh, retrieving data will not answer.

  We also found the following regularity.

  • Mode classic, what we have will NOT cause no response when retrieving data
  • EPMA mode, when we have defined two passes in S1 (or other script) and deploy, update, the problem occurs
  • EPMA mode, if we DON'T re-Dimension libriary value encoding, but change the property of Member S1 in two passes in EAS preview and save, will NOT cause any response when retrieving data.

  I don't know if anyone had seen these questions before and tell me how to solve. Thank you!

  For the first question: I guess you can trigger the SR with Oracle,.

  A second:

  You are trying to retrieve a large number of members in the form of data? Its all dynamic calc, it will take time to recover.

  Try to recover data for a smaller combination and see if its working,

  Plans to crash as well? What is the game of java heap?

  If its working for a smaller combination and gel for more then its value increase the dynamic calc calculator cache.

  Kind regards

  Rahul S.

• Image - width of the div and the issue of scale. Help, please

  Hi guys,.

  I have a problem with the bgr image that I can't solve. Here's a tutorial (Web Animation and interactivity with Adobe Edge animate - Designers Fiesta 2012 - YouTube). On the beginning on this movie, this guy has all its items on stage. There is an image called Green who is a div itself (as opposed to a bgr image). Size of this div is much shorter than the image itself, and I don't know how he did it. Whenever I import my (wider) image on the stage, it shows that it is the actual width. I need to be inside the shorter div due later scaling '' operation. '' It's probably very easy to do, but I am new to AE so I would really appreciate your help because I'm stuck.

  Thank you very much

  Hello

  SYM. $("elementName") .css ({'background-size': '100% 100% ', 'background-repeat': 'no-repeat'});

  The above code will be "resize" or "resize" your image.

  You can write on the Board of compositionReady or on creationComplete Panel.

  elementName is the container: the div tag

  Now, how do I load an image inside a rectangle (tag div) using the code:

  SYM. $("Rectangle") .css ({' background-image': "url(images/picture.jpg)", 'background-size': '100% 100% ', 'background-repeat': 'no-repeat'});

• Group By and the issue of the sum

  Is someone can you please tell me how I can get the ins_id to the group so that the dollar amounts correctly summarize? My SQL and outside current has set are listed below.
  
  

  Very well. What is the right formula?
  Sum (p.pur_quantity) * t.tic_rate

  Would be
  Sum(p.pur_quantity * t.tic_rate)

  return the same results / fix?

• XPRT: "Camera" and the issue of sounds

  Hi - I have a few questions that I can't find answers to anywhere on the web or in the documentation.

  1. Is the button that is currently associated with the calendar, possible to associate it with the camera function?
  2. Where do you turn the sound on the camera?

  Thank you.

  1. it's a shortcut button for any application you want. Menu > setting > Applications > Quick Launch > calendar (side). The default camera app is not a parameter to use the side key, but it can be applications in the Android Market which allow that adapt the buttons to act as the camera button.

  2. it is not an option I see to do this. I don't know there's an application from Android Market that would allow this. I also ask if there is any setting that I am not aware.

  Mark

  Support Forums Manager

• Problems with a simple site, had fixed the issues but now its happening again, shifting of pages

  Hello

  
  

  I'm building one pretty simple compared to my other site and have never had this problem before that's why I'm really confused.

  Two of my pages keep transfer of a couple of cm to the right, and others remain the same.

  I'm gone in the FAQ forum and found that someone else had the same problem so added

  HTML {}

    overflow-y: scroll;
  }

  Who stopped to question, until I rebooted the computer today, and the issue is back. I use DW8.

  
  

  This is the CSS for the site

  * {

  padding: 0px;

  }

  
  

  
  

  {#wrapper}

  width: 890px;

  margin-right: auto;

  left margin: auto;

  }

  #wrapper #header {}

  height: 77px;

  width: 890px;

  margin-right: auto;

  left margin: auto;

  are-family: Georgia, "Times New Roman", Times, serif;

  -font size: 70px;

  color: #000000;

  }

  {#wrapper #div2}

  height: 9px;

  }

  #wrapper #header #leftheader {}

  float: left;

  width: 740px;

  height: 77px;

  }

  #wrapper #header #rightheader {}

  float: left;

  width: 150px;

  height: 77px;

  }

  page of #wrapper #main {}

  height: auto;

  }

  #wrapper #navigation {}

  height: 30px;

  are-family: Georgia, "Times New Roman", Times, serif;

  are-size: 18px;

  color: #000000;

  }

  {#wrapper #div1}

  height: 9px;

  }

  
  

  #wrapper #bodyarea #left {}

  background-color: #FFFFFF;

  height: 200px;

  width: 757px;

  float: left;

  }

  #wrapper #bodyarea #bottom {}

  height: 50px;

  background-color: #FFFFFF;

  }

  #wrapper #bodyarea #left1 {}

  width: 640px;

  float: left;

  height: 180px;

  background-color: #FFFFFF;

  }

  {#wrapper #autremoiintro}

  height: 110px;

  }

  #wrapper #bodyarea #right1 {}

  float: left;

  height: 180px;

  width: 250px;

  background-color: #FFFFFF;

  }

  #wrapper #bodyarea #bodyarea1 {}

  height: 700px;

  }

  #wrapper #main page contact {}

  width: 890px;

  }

  #wrapper #body #bottom {}

  background-color: #FFFFFF;

  height: 50px;

  }

  #wrapper #bodyarea1 #leftcon {}

  float: left;

  height: 350px;

  Width: 465px;

  are-family: "Times New Roman", Times, serif;

  are-size: 16px;

  background-color: #FFFFFF;

  }

  #wrapper #bodyarea1 #bottom {}

  background-color: #FFFFFF;

  height: 50px;

  }

  #wrapper #bodyarea1 #rightco {}

  float: right;

  height: 350px;

  width: 425px;

  }

  #wrapper #bodyarea1 #leftport {}

  float: left;

  height: 170px;

  width: 640px;

  are-family: Georgia, "Times New Roman", Times, serif;

  are-size: 16px;

  text-decoration: underline;

  }

  #wrapper #bodyarea1 #rightport {}

  float: right;

  height: 170px;

  width: 250px;

  
  

  HTML {}

  Overflow-y: scroll;

  }

  And here is the html code for a page that does not move

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 "/ >"

  autremoi < title > < /title >

  < style type = "text/css" >

  <!--

  {body

  background-image: url(images/background.jpg);

  background-repeat: repeat-x;

  margin-top: 0px;

  }

  ->

  < / style >

  < link href = "css/layout.css" rel = "stylesheet" type = "text/css" / > "

  < style type = "text/css" >

  <!--

  a: link {}

  color: #000000;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #000000;

  }

  a: hover {}

  text-decoration: none;

  color: #CCCCCC;

  }

  a: active {}

  text-decoration: none;

  color: #000000;

  }

  {.style2}

  are-family: Georgia, "Times New Roman", Times, serif;

  -font size: 24 PX;

  }

  .style10 {do-family: Georgia, "Times New Roman", Times, serif; do-size: 18px ;}}

  .style9 { do-family: Georgia, "Times New Roman", Times, serif; }

  are-size: 14px;

  }

  ->

  < / style > < / head >

  
  

  < body >

  < div id = 'wrapper' >

  < div id = "header" >

  < div id = "leftheader" > < a href = "index.html" > other me < /a > < / div > ""

  < div id = "rightheader" > < a href = "http / /" > < / a > < / div > ""

  < / div >

  < div id = "navigation" > < a href = "autremoi.html" > other me < /a > | "" < a href = "team.html" > < /a > team | < a href = "portfolio.html" > < /a > portfolio | < a href = "rates.html" > < /a > rates | < a href = "contact.html" > Contact < /a > < / div >

  < div id = "div1" > < img src = "images/div.png" alt = "div1" width = '890' height = '8' / > < / div > "

  < u > < span class = "style2" > team </span > < / u >

  < div id = "div2" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "

  < div id = "bodyarea" >

  < div id = "left" >

  < class p = "style10" > Mattaeus Ball < /p >

  < class p = "style9" > Mattaeus Ball is a professional photographer who has been published in the world. He is also a designer and set Builder. An all around artist with a taste for the magic and the macabre. Mattheus has & quot; eyes & quot; When it comes to making certain this one and is much more than a photographer! Mattheus is a visionary and loves nothing more to make her visions and live through his photographs. You want Mattheus can do with his countless talents and imagination. < /p >

  < class p = 'style9' > < / p >

  < / div >

  < div id = "right" > < img src = "images/matt.jpg" alt = "matt" / > < / div > "

  < div id = "div3" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "

  < div id = "bodyarea2" >

  < div id = "left" >

  < class p = "style10" > < u > Roseanna < /u > < / p >

  < class p 'style9' = > Logan is our head makeup artist. His work speaks for itself, we have searched high and low for an artist who has the whole package and with Martin, we have all this and more! Roseanna vellum is published internationally and has worked for Torture Garden and the clothes Show Live, to name a few. Unique and inspiring Roseanna can help your imagination to life. < /p >

  < / div >

  < div id = "right" > < img src = "images/roseannanew.jpg" alt = "roseanna" / > < / div > "

  < / div >

  < div id = "div4" > < img src = "images/div.png" alt = "div3" / > < / div > "

  < div id = "bodyarea3" >

  < div id = "left" >

  < class p = "style10" > Starla James < /p >

  < class p = "style9" > Starla James is a professional model, the creator of prop, the dresser of the wig and the stylist. She has worked in different genres within the modeling industry. Charles-Antoine has worked with officials in the past but prefer finding his own work that allows his imagination without limits and current. Has dabbled in the popular genres of pinup and Gothic modelling, she sees herself as more of a model with no particular genre, taking gas from different eras and styles to make his own. Knowledge of Charles-Antoine of fashion through the eras is comprehensive and accurate. < /p >

  < / div >

  < div id = "right" > < img src = "images/starla wrath.jpg" alt = "starla" / > < / div >

  < / div >

  < div id = "div5" > < img src = "images/div.png" alt = "div5" / > < / div > "

  < div id = "bottom" > < / div >

  < / div >

  < / div >

  < / body >

  < / html >

  It's one of the pages that moves the html code
  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = ISO-8859-1 "/ >"

  autremoi < title > < /title >

  < style type = "text/css" >

  <!--

  {body

  background-image: url(images/background.jpg);

  background-repeat: repeat-x;

  margin-top: 0px;

  }

  ->

  < / style >

  < link href = "css/layout.css" rel = "stylesheet" type = "text/css" / > "

  < style type = "text/css" >

  <!--

  a: link {}

  color: #000000;

  text-decoration: none;

  }

  a: visited {}

  text-decoration: none;

  color: #000000;

  }

  a: hover {}

  text-decoration: none;

  color: #CCCCCC;

  }

  a: active {}

  text-decoration: none;

  color: #000000;

  }

  {.style2}

  are-family: Georgia, "Times New Roman", Times, serif;

  -font size: 24 PX;

  }

  body, td, th {}

  are-family: Times New Roman, Times, serif;

  are-size: 16px;

  }

  ->

  < / style > < / head >
  
  
  < body >
  < div id = 'wrapper' >
  < div id = "header" >
  < div id = "leftheader" > < a href = "index.html" > other me < /a > < / div > ""
  < div id = "rightheader" > < img src = "images/facebook.jpg" alt = "facebook" width = "150" height = "46" / > < / div > "
  < / div >
  < div id = "navigation" > < a href = "autremoi.html" > other me < /a > | "" < a href = "team.html" > < /a > team | < a href = "portfolio.html" > < /a > portfolio | < a href = "rates.html" > < /a > rates | < a href = "contact.html" > Contact < /a > < / div >
  < div id = "div1" > < img src = "images/div.png" alt = "div1" width = '890' height = '8' / > < / div > "
  < u > < span class = "style2" > Contact </span > < / u >
  < div id = "div2" > < img src = "images/div.png" alt = "div" width = '890' height = '8' / > < / div > "
  < div id = "bodyarea1" >
  < div id = "leftcon" >
  < p > other me < /p >
  6 unit < p > < br / >
  Clements Mews < br / >
  5 avenue of Stevenson < br / >
  BH4 8ED < /p >
  < p > < a href = "mailto: " [email protected] "> [email protected] < /a > < /p > "
  < p > 07989414201 / 01202-778414 < /p >
  < p > Note: keep double clicking on place to zoom in < /p >
  < p > < br / >
  " < small > view < a href =" http://maps.google.co.uk/maps/ms?client=firefox-a & channel = s & hl = in & ie = UTF8 & msa = 0 & he's = 53.8006 51, - 4.064941 & spn = 6.881357, 14.941406 & t = h & msid = 207741114753098749885.00049cc26a50e21806ee7 & source = embed "style =" color: #0000FF; text-align: left "> location < /a > on a larger map < / small > < / p > "
  < / div >
  < div id = "rightco" >
  " < iframe width ="425"height ="350"frameborder ="0"scrolling =" "marginheight ="0"marginWidth ="0"src =" http://maps.google.co.uk/maps/ms?client=firefox-a & channel = s & hl = in & ie = UTF8 & msa = 0 & he's = 53.8006 51, - 4.064941 & spn = 6.881357, 14.941406 & t = h & msid = 207741114753098749885.00049cc26a50e21806ee7 & o utput embed = "> < / iframe > .
  < / div >
  < div id = "div4" > < img src = "images/div.png" alt = "div4' width = '890' height = '8' / > < / div >"
  < div id = "bottom" > < / div >
  < / div >
  < / div >
  < / div >
  < / body >
  < / html >
  
  

  
  

  Thanks in advance for your help.

  -Change

  #wrapper #bodyarea1 #rightport {}

  float: right;

  height: 170px;

  Width: 250px;

  HTML {}

  Overflow-y: scroll;

  }

  on this subject.

  #wrapper #bodyarea1 #rightport {}

  float: right;

  height: 170px;

  Width: 250px;

  }

  HTML {}

  Overflow-y: scroll;

  }

  Note the braces - one of you was missing.  Use it instead of the suggestion of Ken.

• Number of question and the navigation sequence.

  Hello and thanks in advance for any help anyone can provide.

  I am using Captivate 5.5, and part of the project is a questionnaire sequence drag-and-drop slide. I have included the ability to go back, because I want the user to be able to go back in the previous section and check the information if they want to. The issue is set to infinite attempts and three levels of failure. Questions are optional and the issue has a clear and a "Skip" button as well as back and submit.

  The problem: when I test the project, I can start the question and use the back button and return to the issue and that works very well. But when I not properly answer the question and THEN use the back button to review previous slides and then return to the question, I am more able to drag and drop the answers. The grey indicator no longer appears, and the answers cannot be moved. I can still use the submit button, but because I can not change the order of response is always bad. I can use the back button, but the issue never becomes mobile. I can use the "Clear" button, but it does nothing. I can skip the question, but it is not very useful because I would like the user to be able to answer the question after reviewing the information and return.

  I don't know about the issue of the scope of quiz, and I click the buttons set up at the beginning and end of the project that are included in the quiz so that I can not leave the scope quiz and mess things this way. But nothing I try seems to correct this problem.

  To sum up, I have a question of sequence, but once the user responds incorrectly and uses then the back button to review information, reverting to the question after it makes the issue frozen somehow, unable to move the responses in the proper order, even if the buttons still work.

  Thank you once again if someone can help me solve this problem!

  I'm really sorry, but that's the way the Question slides are designed to CP5: the number of attempts, you allow the Question level must be exhausted when the user is on the slide. As soon as you leave the question slide will be blocked. Several attempts on the level of play will be always available if you don't let the scope of quiz, but this can be done after completing the quiz, and all responses will then be those deleted, correct as incorrect. This changed to COP6, where sanitation is possible (just answered today such a question in another thread here), and you can access a slide contained a question slide, go back and change the answer.

  Your goal in CP5 is possible if you create custom question slides, but then there is the problem that drag & drop is not available in native mode as you have in the default sequence Question slide.

  Lilybiri

• Table and the loop problems (please help)

  Im making a site for a project where I have to include a table and a loop.
  
  For this section, I put in a "contact us / Q and A" page where the user can enter a name, email, and question.
  This information is sent to a table and then following image shows the form of the table information in the dynamic text boxes.
  
  I've included a loop to check that each part of the table contains data (name, email and the issue).
  Then I have an If Else, which clears the form either if a section has been missed, OR if the form was completely correctly it directs the user to the frame following where as I said above the details appear in dynamic text boxes.
  
  The problem im having is the loop to check For the table that's a waste. Someone can please help me out here and get the loop to verify that all fields have been filled.
  
  Here is my code for the initial frame
  
  

  You must update the values in your table at the time you press the submit button. Code follows

  There is a second example to check the strings (it's a little complicated, but it's a useful trick if you can understand). This does not leave the Send button work unless all fields have something in them