Clean install, no internet

Similar Questions

• Clean install / restore to fail Internet

  I'll put up a 2010 MacBook Pro start as new for a next project. After erasing HD for a clean install, the installer returned a message that says El Capitan could not be verified or may have been corrupted. I resorted to the recovery of the internet, but this is also a message that El Capitan can not be installed due to an error. I don't have a backup time machine small enough to drive on the Mac - is it possible forward here?

  Thanks in advance...

  stop,

  Disconnect all external devices

  Reboot into recovery mode

  If the internal collection fails try internet recovery

  for best results, connect your mac directly to your router/modem and suspend any transmission from other devices on your network that can be download or steam.

• Unable to connect to the internet with my Compaq Presario CQ5500F after a clean install of Win 7 64 bit

  Hello

  I recently did a clean install on my Compaq Presario CQ5500F desktop, but when I finished, I realized that I could not connect to wireless internet almost anything. To clarify, my internet worked before the clean install. I know exactly of what readers have been installed, but I do not know the network controller has a yellow question mark on it now. (See attached image)

  In addition, it seems that the computer does not have a wireless card although I was previously using an omnidirectional antenna external wireless connected to my wifi.

  I have already visited the HP/Compaq site here http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4209... to install the drivers, but it seems that the network controller, it does not install correctly.

  Can someone help me please? I am very frustrated.

  In fact, I just solved it!

  I looked up the material ID I had just posted on Google and found that someone had the driver on his Skydrivefiles. Then I followed their instructions and went into the Device Manager and selected Update driver the driver of your properties of network adapters tab and pointed on the expanded files.

  Turns out I need files for Ralink RT61 Turbo Wireless LAN Card.

  Everything works again!

  Thanks for me direction in the right way, Paul!

  I hope that someone else has acquired this too!

• Clean install of windows xp, PC does not start Internet Explorer

  I did a clean install of windows xp, but my PC does not start under Internet explorer, nor can I install browser of my ISP with the drive, they gave me.

  I made a second clean install & noticed that the installation seems to ignore the part that asks about the connection to the internet. At this point, the command prompt screen flashes up & then closes. The installation continues her & ends.

  Can someone help me please?

  Good job; Yes!

  Your specs are here:
  https://support.Dell.com/support/eDOCS/systems/dimc521/en/SM_EN/specs.htm
  Since you have the video and audio embedded, download the drivers for which follows on a USB key:
  • Chipset (nVidia_SMBus_A02_R132919.exe)
  • graphics - on Board (driver nVidia: R133260.) (EXE)
  • audio - aboard (the SIGMATEL driver: R132395.) (EXE)
  • network, which will allow you to get online! -Broadcom driver: R149798. EXE

  Then download other files mentioned in my instructions (SP3, IE8, MSE) and go to town!

• Can't get internet after clean install.

  Hello

  I just finished a clean install with Windows XP Media 2005 SP 2 and I can't access the internet. I can't find network connections.

  What should I do?

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Or for the son of connection http://www.ezlan.net/debug.html

• After clean install of Windows 7, Netflix and Internet TV plugin does not work on Windows Media Center.

  Original title: problem with Windows 7 Media center

  Is there anyway that I can replace the whole C:\Windows\ehome? There is a permissions issue, and I can't find a way to change the permissions...

  The only reason I want to do is I did a clean install of windows 7 and the plugin TV Pluzz.fr and the internet do not work on this computer and it seems to be no work around. But I have a PC where WMC works fine and I can replace the entire record of WMC and it should work like the other PC (I think).

  I could do if I ran linux or something, but I'm looking for something simple or a fix to this problem with WMC.

  Hello

  Thanks for the reply.

  It is too bad to know the steps in my previous post did not help to solve the problem.

  I would like to inform you that starting from September 20, 2012, the experience of Internet TV is no longer available. You can consult the following Microsoft article that has the same information:

  Cannot open Internet TV in Windows Media Center

  http://support.Microsoft.com/kb/2801382/en-us

  For problems with Netflix, I suggest you follow the steps in the Microsoft article and check following:

  http://support.Microsoft.com/kb/972496/en-us

  Also applies to Windows 7.

  Please answer us on the State of the question to help you further.

• Windows 7 does not connect to the internet after the clean install

  I did a clean install on my Windows 7 computer, but means doing so my computer not connect to internet more that connection drivers were lost. I'm going back between Web sites up-to-date, but without success. I someone could direct me to the link with the appropriate driver if I give you my ibs material?

  If you purchased your computer with Windows 7 preinstalled, the computer or the manufacturer of the laptop computer uses drivers for it.

  If you have installed Windows 7, you can always go and find Windows 7 drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  Examples.

  Dell drivers:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  HP drivers:

  http://WWW8.HP.com/us/en/drivers.html

  Drivers Acer:

  http://us.Acer.com/AC/en/us/content/drivers

  See you soon

• played windows clean install, now cant access backed up files or connect to internet

  Installation of my windows system has been altered so windows support sent me a new disk, windows Home premium sp1 to perform a cleanup. I used the windows backup feature to back up all my files on the D drive. Then I did the clean install. But now I can't get the files on the C drive. In addition, argues that this computer has an adapter wireless installed and configured. I'm pretty much call. Help, please.

  problem solved

• My macbook air 13 "(2015) is very slow, even after a clean install"

  Hello

  I have a macbook air 13 "from 2015 and it is VERY slow. I did a clean install from scratch of El Capitan (10.11.06) and always very slow.

  Etrecheck give ' "Performance: poor"»

  Is there a hardware problem? or what to do?

  Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-05 10:18:11

  Download EtreCheck from https://etrecheck.com

  Duration 17:11

  Performance: poor

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Computer is too slow

  Description:

  too slow

  Hardware Information: ⓘ

  MacBook Air (13 inch, early 2015)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Air - model: MacBookAir7, 2

  1 1.6 GHz Intel Core i5 CPU: 2 strands

  8 GB RAM not extensible

  BANK 0/DIMM0

  OK 4 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n/ac

  Battery: Health = Normal - Cycle count = 40

  Video information: ⓘ

  Intel HD 6000 graphics card

  Color LCD 1440 x 900

  Software: ⓘ

  OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour

  Disc information: ⓘ

  SM0128G SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) / [Startup]: 120,10 (Go 104.05 free)

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [no charge] 6 tasks Apple

  tasks of Apple 166 [loading]

  [running] Apple 58 jobs

  [killed] 9 tasks of Apple

  9 killed process lack of RAM

  Launch system demons: ⓘ

  [no charge] 47 Apple jobs

  [loading] 158 jobs Apple

  [running] Apple 77 jobs

  [killed] 8 tasks of Apple

  8 killed process lack of RAM

  Launch demons: ⓘ

  [loading] com.macpaw.CleanMyMac3.Agent.plist (2016-10-04) [Support]

  User launch officers: ⓘ

  [loading] com.bittorrent.uTorrent.plist (2016-10-04)

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-10-05)

  Items in user login: ⓘ

  iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  uTorrent program (/ Applications/uTorrent.app)

  CleanMyMac 3 Menu program (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Plug-ins Internet: ⓘ

  Default browser: 601 - SDK 10.11 (2016-09-03)

  QuickTime Plugin: 7.7.3 (2016-07-09)

  3rd party preference panes: ⓘ

  None

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  14% WindowServer

  4% kernel_task

  0% SystemUIServer

  0% cloudpaird

  Top of page process of memory: ⓘ

  670 MB kernel_task

  Mdworker (11) 188 MB

  Com.apple.CommerceKit.TransactionService (2) 41 MB

  Finder 41 MB

  Mds_stores 33 MB

  Virtual memory information: ⓘ

  5.02 GB of free RAM

  2.98 used GB RAM (1.82 GB being cached)

  40 MB used Swap

  Diagnostic information: ⓘ

  5 October 2016, 09:38:39 test - passed

  Hello, have you tried to reset the management system (SCM) controller on your Mac - Apple Support?

• Windows on Mac - clean install disadvantages and benefits vs Bootcamp?

  Hi people,

  I recently got my first Mac - one Macbook 2016. I tried on El Capitan, and I still much prefer Windows, I'm looking to install on Mac.

  I've read through bootcamp for double installation, but largely, I would prefer to perform a new installation on Windows (I have a copy of Windows 8.1 Pro with a license key). I can't determine whether or not it is recommended and I would appreciate it if someone could clarify it for me.

  My understanding is that: -.

  (1) it is possible to completely remove OSX and have a clean install of Windows.

  (2) OSX (in my case, El Capitan) can be reinstalled at a later date without extra cost (i.e. free) using the OSX installer.

  (3) install or remove Windows OSX will not affect my warranty the warranty is of Apple hardware.

  One of the main concerns seems to be none using Bootcamp means pilots Apple for Windows will not automatically available. I heard some mention that these drivers may actually now be downloaded separately on the Apple site and installed directly on the machine once Windows is in place. Can someone confirm this please?

  Thank you for taking the time to read this. I hope can get definitive information and I can move on Windows soon.

  Welcome to Apple Support communities

  CVoador wrote:

  My understanding is that: -.

  (1) it is possible to completely remove OSX and have a clean install of Windows.

  (2) OSX (in my case, El Capitan) can be reinstalled at a later date without extra cost (i.e. free) using the OSX installer.

  (3) install or remove Windows OSX will not affect my warranty the warranty is of Apple hardware.

  You are right. You can remove OS X and only keep the windows, but it has some disadvantages, to know before doing this. Apart from this, Internet recovery will let you install OS X at any time even if you have deleted the recovery partition, and you will not have to pay for OS x: OS X is free and is already registered for your Apple ID.

  Drivers, Boot Camp Assistant (an application, you can find in/Applications/Utilities) leads you through the first steps before you install Windows on your Mac, and one of them is to download the drivers for your Mac requires and put them in a USB key. However, you may need to OS X to get latest driver versions.

  Instead of completely removing the OS X, I suggest to allocate more space to Windows, but keep OS X in a small partition. By doing this, you will always be able to update the drivers (where you need OS X to do) and you will have fewer problems getting OS X in the future if you want to delete Windows.

  Finally, don't forget to make a backup of your files before you install Windows on your Mac. You may need it in case something goes wrong with the Windows installation.

• After a clean install, Yosemite Mail crashes at launch

  I have re-installed Yosemite and upgrade 10.10.5 three days ago. Yesterday, I recreated 11 non-iCloud email accounts. I launched Mail and proceeded to uncheck the option "automatically detect and maintain the parameters" and to replace the port numbers incoming and outgoing according to the instructions of the ISP, I consulted in order to avoid the main Contacts and issues of mail in the course of the two months since my original Yosemite clean install - issues that have worsened to the point where I was advised in these forums to re - install. If I had known everything uncheck this option, perhaps none of these problems would be developed?

  After unchecking the option and change the port numbers for the incoming server and outgoing 11 IMAP accounts, I took all online accounts. Mail seems to be stable. I quit Mail and relaunched it five minutes later, just to be sure. He froze immediately on launch; There is not enough time to click on anything before spinning beachball appears and never goes away. I checked the Sys Prefs/Internet accounts: no problem.

  Here are the logs from Console for today attempted launch of Mail:

  06/07/2016 6:24:16.318 PM Mail [1318]: AllSignatures.plist: read plist error: error Domain = NSCocoaErrorDomain Code = 260 "the file 'AllSignatures.plist' could not be opened because there is no file of this type." UserInfo = 0x60800066c640 {NSFilePath=/Users/mother/Library/Mail/V2/MailData/Signatures/AllSignatures.pli st, NSUnderlyingError = 0x608000650ce0 "the operation could not be completed. No such file or directory"}

  06/07/2016 com.apple.xpc.launchd [1 6:24:16.379 PM]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) the _DirtyJetsamMemoryLimit key is not available on this platform.

  06/07/2016 com.apple.xpc.launchd [1 6:24:17.853 PM]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) the _DirtyJetsamMemoryLimit key is not available on this platform.

  06/07/2016 6:24:18.409 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.409 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.410 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.410 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.410 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.410 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.410 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.410 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.477 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:18.477 PM Mail [1318]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef without ProcessReply function

  06/07/2016 6:24:19.059 PM Mail [1318]: [IMAP] should untagged first response box495.bluehost.com

  06/07/2016 6:24:19.146 PM Mail [1318]: [IMAP] should untagged first response box495.bluehost.com

  06/07/2016 6:24:19.532 PM accountsd [336]: cannot find executable for CFBundle < /System/Library/Accounts/Notification/CloudDocsAccountNotificationPlugin.bundl e > 0x7fc1e9d159f0 (unloaded)

  06/07/2016 6:24:19.756 PM fontd [296]: BUG in client libdispatch: dispatch_mig_server: mach_msg() has memory invalid (ipc/send) - 0x1000000c

  06/07/2016 6:24:19.756 PM Mail [1318]: CoreText CopyFontsForRequest received mig CPI error (FFFFFFFFFFFFFECC) font server

  06/07/2016 6:24:19.756 PM Mail [1318]: CoreText CopyFontsForRequest received mig CPI error (FFFFFFFFFFFFFECC) font server

  06/07/2016 6:24:20.351 PM accountsd [336]: enter ShareKitAccountEnabler - didChangeWithType - type = 2 for the [email protected] (843792E4-0915-4FE8-BD0F-D1018E23DF1F) account.

  06/07/2016 6:24:20.372 PM accountsd [336]: AIDA Notification plugin running

  06/07/2016 com.apple.xpc.launchd [1 6:24:20.404 PM]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) the _DirtyJetsamMemoryLimit key is not available on this platform.

  06/07/2016 6:24:20.592 PM icbaccountsd [1326]: error in connection verifying Apple Internalness. Error: Domain = NSCocoaErrorDomain Code 4099 = "could not connect with a helper." (The connection to the service named com.apple.CrashReporterSupportHelper has been invalidated.) UserInfo = 0x7f9e40e0a160 {NSDebugDescription = the connection to the service named com.apple.CrashReporterSupportHelper has been invalidated.}

  06/07/2016 6:24:20.630 PM sandboxd [393]: ([1326]) icbaccountsd (1326) deny com.apple.CrashReporterSupportHelper mach-search

  06/07/2016 6:24:22.825 PM Mail [1318]: [IMAP] should untagged first response box495.bluehost.com

  06/07/2016 6:24:22.920 PM Mail [1318]: [IMAP] should untagged first response box495.bluehost.com

  06/07/2016 6:24:25.409 PM Mail [1318]: [IMAP] should untagged first response box495.bluehost.com

  06/07/2016 6:24:25.503 PM Mail [1318]: [IMAP] should untagged first response box495.bluehost.com

  06/07/2016 com.apple.xpc.launchd [1 6:30:09.116 PM]: (com.apple.mail.3156 [1318]) Service was released due to the signal: completed: 15

  06/07/2016 6:30:12.835 PM spindump [533]: report of hang Saved mail version 8.2 (2104) at /Library/Logs/DiagnosticReports/Mail_2016-07-06-183012_MacBookPro.hang

  06/07/2016 6:31:29.425 PM Console [1336]: unable to connect (_consoleX) out of (NSApplication) (ConsoleX): missing setter or instance variable

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - subject

  Safe mode - Yosemite

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• Possible hard drive after clean install failure

  Appreciate it really all thoughts on this issue, because it drives me crazy and apparently get worse...

  I added 8 GB of RAM and an SSD Samsung 840 PRO in a Mac mini in 2011 about three years ago. At the time, the Fusion drive has just been introduced, and I found the online instructions to configure the combo HD SSD/existing as a Fusion player. After ironing out a few bugs, it worked perfectly (at least from the point of view of the user) for nearly three years. Significant speed increase, could handle more intensive applications of multiple users, etc.

  Three weeks ago, I decided to do a clean install. I wanted to get rid of all accumulated waste, as well as some of the Notification Center widgets don't work properly. Immediately I noticed the startup time is longer, but once connected, all seemed well. Just moved old files to the new system from a Time Machine backup, and everything worked well. In disk utility, it looked as if the OS has created two discs as a Fusion player, so I left as what.

  A week ago, I started notice stuttering in the downloaded movies in iTunes, which never happened before. Around the same time I started having the spinning beachball while running almost nothing: Safari with less than 10 tabs open (no video game), iTunes (inactive), Mail, etc... Impose anything. I performed first aid in disk utility and found no problem. I kept the activity monitor for the last 24 hours with nothing significant, other apps does not not showing the spinning ball.

  I saw someone else evoke here EtreCheck, so I did that and got two red warnings:

  Macintosh HD (2) /: 621,05 go-go (295,75 free) - 31 errors

  Drive failure!

  This error arose in both sections of the HD, as shown below:

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-24 07:15:16

  Download EtreCheck from https://etrecheck.com

  Time 02:41

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Beachballing

  Description:

  Recently a clean installed on a system having and sad aftermarket, now without constantly slowing, beachball, movies stutter, etc.

  Hardware Information: ⓘ

  Mac mini (mid-2011)

  [Data sheet] - [User Guide] - [warranty & Service]

  Mini Mac - model: Macmini5, 1

  1 2.3 GHz Intel Core i5 CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  Intel HD Graphics 3000

  DELL S2440L 1920 x 1080

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since the start-up time: 13 hours

  Disc information: ⓘ

  SAMSUNG SSD 840 PRO series disk0: (128,04 GB) (Solid State - TRIM: No.)

  EFI (disk0s1) < not mounted >: 210 MB

  Boot OS X (disk0s3) < not mounted >: 134 MB

  Macintosh HD (2) /: 621,05 go-go (295,75 free) - 31 errors

  Drive failure!

  Storage of carrots: disk0s2 127.69 GB Online

  Storage of carrots: disk1s2 499.25 Go online

  Hitachi HTS545050B9A302 disk1: (500,11 GB) (rotation)

  EFI (disk1s1) < not mounted >: 210 MB

  Recovery HD (disk1s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (2) /: 621,05 go-go (295,75 free) - 31 errors

  Drive failure!

  Storage of carrots: disk0s2 127.69 GB Online

  Storage of carrots: disk1s2 499.25 Go online

  USB information: ⓘ

  Western Digital My Passport 0748 1 TB

  EFI (disk3s1) < not mounted >: 210 MB

  Backup HD (disk3s2) backup Volumes/HD: 959,83 go-go (207,03 free)

  Computer, Inc. Apple IR receiver.

  MediaTek Inc. MT1887

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 8 tasks Apple

  [loading] 152 tasks Apple

  [operation] 78 tasks Apple

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 156 tasks Apple

  [operation] 87 tasks Apple

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-15) [Support]

  Items in user login: ⓘ

  Dropbox application (/ Applications/Dropbox.app)

  Other applications: ⓘ

  [ongoing] com.getdropbox.dropbox.259552

  [loading] 393 tasks Apple

  [operation] 189 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

  QuickTime Plugin: 7.7.3 (2016-03-12)

  Flash Player: 21.0.0.226 - SDK 10.6 (2016-04-21) [Support]

  Default browser: 601 - SDK 10.11 (2016-03-12)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-15) [Support]

  Time Machine: ⓘ

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 621,05 GB disc used: 325,30 GB

  Destinations:

  My passport [Local]

  Total size: 959,83 GB

  Total number of backups: 32

  An older backup: 17 09/15, 01:57

  Last backup: 24/04/16, 07:00

  Backup disk size: too small

  959,83 GB backup size < (disc 325,30 GB X 3)

  Top of page process CPU: ⓘ

  3% WindowServer

  kernel_task 2%

  1% fontd

  0% askpermissiond

  Top of page process of memory: ⓘ

  1.45 GB com.apple.WebKit.WebContent (7)

  608 MB kernel_task

  Softwareupdated 475 MB

  ITunes 369 MB

  270 MB QuickTime Player

  Virtual memory information: ⓘ

  80 MB of free RAM

  used 7.92 GB RAM (1.98 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  April 23, 2016, 20:52:25 ~/Library/Logs/DiagnosticReports/com.apple.appkit.xpc.openAndSavePanelService_2 016-04-23-205225_ .crash [deleted]

  System/Library/Frameworks/AppKit.Framework/versions/C/XPCServices/com. Apple.AP pkit.xpc.openAndSavePanelService.xpc/Contents/MacOS/com.apple.appkit.xpc.openAnd SavePanelService

  April 23, 2016, 17:23 self test - passed

  April 21, 2016, 18:34:49 ~/Library/Logs/DiagnosticReports/Dropbox_2016-04-21-183449_[redacted].crash

  /Applications/dropbox.app/Contents/MacOS/dropbox

  I guess at this point that OS X put in place the incorrect Fusion drive, causing conflicts... But I don't know what to do about this. I have several backups, so this isn't a problem.

  This community is a great resource, thank you to everyone who adds. As I said, I'd like to advice for this...

  I think it is obvious that you have a disk failure. Could be the SSD, HD, or both.

• Clean install of El Capitan, causing all sorts of questions

  Hello

  I decided to do a clean install of El Capitan on my Macbook Pro 13 "retina end 2014 using sudo command to set up the USB bootable stick with the latest version of os x for the Mac Appstore. Installation of El Capitan appeared flawless in its execution and first start went well. Before the installation, I just formatted the disk by erasing the current drive and creating a new partition that I chose to implement the OSX on.

  Everything seems to be normal and familiar, until I try to log in iMessenger and FaceTime, which, in both cases, does not work after several attempts. Either I was told my internet connection has been lost or authentication failed. In addition to these connection problems, the overall performance of the operating system seems to be awkward and not nearly as smooth with my initial configuration to the factory system.

  I started to wonder if the current version of El Capitan available on the Appstore is flawed and broken? Someone else met weird performance / connection problems after doing a clean installation of El Capitan on their Mac recently?

  I can't use my Mac like this: someone in the support of Apple technology to address this issue now!

  Mike

  I did the same install clean, but the Apple server.  I'm having the same problem, however, there are several threads of people experiencing the same problem with the new OS X updated on El Capitan and some who use Yosemite said that they have the problem of too!  It is on the end of Apple

  I use an Early 2011 MacBook Pro 15 "2.0 GHz

• EliteBook 840 G3: Elitebook 840 G3 clean install of Windows 8.1 - how to install the drivers?

  I bought my laptop working from a former employer, provided that the disk was completely wiped out (no recovery partition or whatever it is) and so I need to do a full clean install.

  I installed Windows 8.1 successfully for an external USB DVD. The system starts, but device drivers are missing, including wireless and wired networks.

  On the website of HP, I downloaded the device drivers for this machine/operating system combination. These downloaded files are .exe files. I put them on a USB key so that I can transfer them to the laptop. I thought I'd install them as follows:

  In the windows Device Manager, identify the network device, right click, select "install driver", point windows in the directory containing the .exe files downloaded.

  It does not work. Windows does not recognize the files .exe as pilots.

  Q1: I'm supposed to perform each of these .exe files (IE, which will install the drivers, and windows will then they are present?

  Q2: Which of the 2.3GBytes drivers should I install? If I install the network drivers Windows will be able to "search the Internet" and find all the other missing drivers?

  Q3: Is it possible to get an OEM installation disc that makes the entire process less painful?

  Thanks in advance for any help and advice.

  You are the very welcome.