Clean installed of 8.1 to 10240 10 Windows, BSOD after windows updates.

Similar Questions

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  I am running Vista Ultimate 64 bit and in order to install the internet security package, I need to install SP2. Belongs to this normal windows update or do I have to download it from Microsoft?

  Windows Vista SP2 came out mid-2009.  You should have gotten a long time ago.

  How to obtain the latest Windows Vista service pack

• I'd be able to do a clean install of El Capitan * without * destroy my Windows partition?

  I bought this media 2011 27 "iMac used earlier this year as a refurb from a dealer. It came with El Capitan installed, but I have the feeling that they had a facility upgrade compared to a clean install. The computer suffers from slow start and loading slow program (but once it loads then its fine). It's the same with my old iMac when I did an upgrade to Leopard years ago snow leopard, and erase the disk and performing a clean install OSX (and put files and programs back with Time Machine) has solved these problems then. So I thought it wouldn't hurt to try a clean install on this machine.

  But read the tutorials I noticed that if you are not the first owner of the computer, then you cannot install updates OSX without resetting the computer? Although I WAS able to install the OS via the App Store updates (and I thought that I linked my Apple ID to the machine when I put initially in place), won't install not mean I should be able to clean, or it will have to be completely reset?

  Yes, I've run disk utility and checked my HHD drive, it works fine. The entire machine is nice and quiet, not making abnormal sounds or perform exceptionally, it's just really the slow start in OSX and slow loading programs that are the problem.

  I also recently created a Windows partition and installed Windows 8.1. It starts and runs decently faster than OSX, so I think it's just a problem with OSX and not the HHD himself and do a clean install will be hopefully solve problems. This computer has given me a lot of grief, creating a partition to install Windows 8.1 (unlike my old iMac) so wouldn't really really really have to wipe the HHD together to "change the property" and having to mess with which once again...

  It 'sounds' like since the app store IS letting me install OS and updates to program with my Apple, I SHOULD be able to start in the RecoveryHD Partition and ID here to make a new install of Mac OS x on * just * my existing Mac partition. And this should not erase my * any * HHD, just the Mac partition. I'll save my whole Windows partition just to be safe, however. I could not find a guide which deals specifically with only reset the OSX partition and not wipe out Windows in the process, so I want to make sure I have my facts straight. I had planned on OSX reset and then restore my files with Time Machine. However, I also want to assure you that this will allow me to go even and reset the OS in the first place, given that I am not the original owner of the iMac and I don't know if they reset it correctly.

  Sorry for the extremely long question and TIA!

  Open the Mac App Store, make sure that you are signed in with your Apple ID and click on the purchase tab to see if El Capitan is associated with your Apple ID. If this isn't the case, you will need to download it so it will be associated with your Apple ID. If this is the case, you are all ready.

  Are updates to OS X, not the buyer, so you can install all the updates, but the OS needs to be associated with your Apple ID.

  I'm not sure about Windows, how did you install Windows? With Boot Camp? You should be able to clone on another drive (if you have one) using Clonezilla. Then wipe and reinstall El Capitan and put in place the Boot Camp partition and clone back.

• W7 Ent. SP1 x 64 clean install on the new PC - very slow to load after reboot during installation

  Hi all

  I'm busy to install W7 Ent. SP1 x 64 on two computers for a small organization non-profit of my friends, all the similar Assembly (motherboard: ASRock H81M-VG4, CPU: Intel Celeron G1840, transcend SSD). The first PC went perfectly, no problems with the installation at all. Now, I installed the second, but unfortunately the following happens:

  After restarting the installation, was asked to enter the name of the computer normally, and then to set up a password. When I clicked on next (and leaving the word password empty) the whole process seems to freeze a little, and then after a few minutes, I could choose settings updates, after which everything slowed even further. "Finalizing settings" took about three quarters of an hour. Once this done, all slowed even more, and it now displays a black screen telling me that this is not a genuine copy of Windows (had no chance to fill in the key product of course) and after about half an hour he is now "configuration of settings customized for xxxx".

  -EDIT - Windows has begin once (between my opening message and my second post), and it was terribly slow in everything that (like several minutes before opening anything). I installed the LAN driver with the idea of updating all the drivers, but after a reboot it is so late it now already taken 10 minutes to boot Windows (and is suspended in the Welcome screen again).

  I've done an another clean install after using DISKPART to format the SSD, but the same thing is happening again once unfortunately. I installed on a USB bootable, I used to install two other computers as well (one before this one and the other afterwards), and everything is fine with those. Swapping the RAM module for a good known has not changed the situation.

  All comments are welcomed, appreciated, thanks.

  All other essential drivers have been installed: video, Chipset?

  Try the SSD at the other system and see how it starts in the system causes problems.

  Also try the SSD with the painful installation in this computer to see if the problem persists.

  Could contribute to isolate if the SSD.

• Delete all the files/folders of old install once the last series on the window updates have been installed?

  I have everything, if records of installation/uninstallation and newspapers since I installed XP.

  I'm sure that the last set of Windows updates work.

  Is there a problem with the removal of old files/flies and connects using CCleaner?

  If not all, can I at least remove those older files that the SP2 install date?

  What problems can I hire after cleaned?

  I guess that the answer to MS Office updates also apply.

  Thank you

  caveman88

  If your PC behaves properly, you can remove the hidden Windows hotfix backup files that start with $NTUninstallKB to the WINDOWS folder. There are two ways to do:

  A. manually, but copy files on a CD/DVD first to enable their restoration has a fix must be removed thereafter. Now delete the folder \WINDOWS, but leaves the orphan entries to add / remove programs intact. Remove only the $NTUninstallKB files that relate to corrections, not those for applications such as Word, WMP, etc.. In addition, DO NOT DELETE THE folder$ $hf_mig.

  B. my preference goes to run a script that also removes the corresponding entries in Add / Remove programs. Once they are deleted by the script, they cannot be restored. Download, extract and run this little scripthttp://www.dougknox.com/xp/utils/xp_hotfix_backup.htm creating a system restore point first just in case something goes wrong when the update of the register.

• SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

  SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6002.22202
  Package Version 6.0
  2009-10-24 12:36

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

  Control components store

  Summary:
  Seconds executed: 1241
  Found 4 errors
  CBS MUM lack count: 4

  Unavailable repair files:
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
  servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
  servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

  Hello Yiratr,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  http://support.Microsoft.com/kb/956702

  That should do the trick for you.

  Thank you.

  Kind regards

  Augustine.

  "URGO".

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Win7, installed on the RAID1 does not work Windows Update and messneger (SID problem)?

  Hi, first of all the machine description

  OS: Win7 Pro 64 bit Original and new
  MB: ASUS P7H57D-V EVO
  Processor: Intel Core i7 860
  RAM: 4 x 2 GB Corsair XMS3 CMX4GX3M2A1600C9
  Graphics: Ati Radeon HD5670
  HARD drive: 2 x WD GP 1 TB - 1 x Seagate 1 TB

  Problem: a bit long to explain...
  I first tried to install the OS on a RAID1, so initially I set raid in the bios with the 2 WD1Tb, then I created the table and I started the installation.
  WIN DVD it recognises the table, it starts installing, it made the first reboot, when is close to finishing it gives an error that cannot complete the installation. I spent 10 days trying to solve the problem without result.
  So I decided to work around the problem, I installed the operating system on a single hard drive, then I cloned the HDD for the RAID1.
  Everything seems to go well but... Update Windows and MSN Messenger will not connect, as having a problem of equality SID.
  If I clone the installation of work, everything works on a different disk included WIN UPDATE and Messenger.
  Cloned on the table, right.
  The table is correctly recognized by WIN7, I downloaded the latest drivers from the Asus MB site, but the problem remains

  What can I try?

  Thank you to everyone

  If 'update of Windows and MSN Messenger' [AKA Windows Live Messenger] are not connected, the chances are it is a network problem. And then...

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. If Win7 64 bits is pre-installed on the computer when you bought it, a free trial Norton or McAfee came preinstalled, too? (No matter if you have never used or activated).

  =======================================

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date

  How TO activate the automatic update enabled or disabled
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list installed updates (Vista & Win7).

• renovated, install XP SP2, valid and cannot access windows update

  Hello world

  I reformated my desktop PC, install XP SP2 original frommy OEM drive, valid and cannot access windows update.

  All solutions?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3-getting-error-0x8024400a/a71b55ee-10d4-410C-8b0b-a2114f7d8b94

  UTC/GMT is 20:23 on Sunday, October 28, 2012

• Error 80070020 when installing nVidia GeForce GT 230 M through Windows Update.

  Original title: suddenly my Windows 7 does not detect my nVidia GeForce GT 230 M

  Everything was going well until I tried to update the graphics driver through windows update... suddenly the solution of problems on my screen and everything is a mess now... the update installation failed, I tried again and again but did not work and it it gives me error Code (80070020)! I tried to download the driver from the official site but there not too... as if she has not detected any graphics card! I tried to look for the reader to "System information" and I went to check the display and I found nothing! as if it just disappeared in the air!

  Hey, Adnan,.

  This problem could be caused due to the update of the driver failed. Uninstall and re - install the latest drivers could do the trick.

  Reference: http://windows.microsoft.com/is-is/windows7/windows-update-error-80070020

  Here are a few steps, try.

  1. start the computer in safe mode.

  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode

  2. find the nVidia GeForce GT 230 M under adpaters to display in Device Manager. In addition, let us know what other driver, you see under graphics cards.

  -Click Start and type Device Manager in the search start and press ENTER.

  -Press on the longer brand before graphics cards.

  -If you see the nVidia GeForce GT 230 M, right-click on it and choose Uninstall. You may be asked to remove the driver software. Press OK and continue.

  -You may be asked to restart the computer. Do not restart the computer.

  3. check that the software nVidia in programs and features.

  -Type of Control Panel in Start search, and then press ENTER.

  -Select programs and features , and then click uninstall a program.

  -Check the nVidia software. If found, select them and click Uninstall.

  -Once all nVidia-related programs are uninstalled, restart the computer and start the computer to nomally.

  Once the computer restarts, it will try to check for new material and to download and install display drivers.

  Since you have already downloaded the nVidia drivers, install them and restart the computer.

  Note: Do not install the drivers that are provided in the Windows updates. It is best to download the latest drivers from the website of the manufacturer of the computer.

  Hope the troubleshooting steps to help you solve the problem of video driver.

• I have problems to download or install anything which does not directly from windows update or security or disk update.

  I just got a new computer with windows Vista.  I had another computer with Vista, but have not had this problem before.  I can't download any programs like itunes, adobe or messengers.  The problem is that when I download or install it runs through the steps, but does not end.  If I download something I choose to save to the desktop.  I don't have the box checked to close when the process is done, but it remains closed.  I tried to disable the virus protection and firewall and have always found the Outlander issues.  Is there something I can do to fix this?  It became a same stress and annoying problem with a list of solution without end.  Nothing seems to work for me.  Can someone please help with to let me know what I can try?  I tried what was listed on help and in all instances and still can not find the solution.  It cannot be a virus or security issue because it was a brand new computer and I did all the updates of windows.  This problem has been with me from the beginning on the brand new computer.  Help, please!

  Hi Willibus,

  Thanks for posting your question on the Forums of Windows Vista.

  Sometimes security software can block access to the software download and installation.

  You can try disabling the security software and check if that allows you to download and install the software.

  If this does not help, you can also try to create a new user account on the machine and check if that helps.

  You can follow the article given to transfer data from the old user account for the new user account:

  http://support.Microsoft.com/kb/928634

  NOTE: Make sure that you do not transfer the parameters, but only data from corrupt or good account the new account will again get corrupted and the question may reappear.

  You can also try to set up the machine in a clean boot state, and check if all software 3 part blocks access.

  To set up the machine in a clean boot state, you can follow the given article:

  http://support.Microsoft.com/kb/331796

  Note:  Make sure you put the computer to a Normal startup mode once the problem is resolved.

  Hope the above information helps. Please go back and let us know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• Windows 10 clean install - need product key

  I bought a G70-70 last week and I would like to do a clean install of Windows 10. Before diving, I set up a dual boot with the 8.1 existing. During the Win 10 install it twice asked for a product key, but also allowed the installation to continue. I now have a working win 10, but he says that it requires activation. In the activation screen, it says I have an existing product key of *-8HVX7, but the details of the error show ' 0xC004C003 - the activation server determined that the specified product key has been blocked "."

  "I tried to use Magic Jelly Bean to get the product key existing under 8.1, but if I get it it gives an error code of ' 0xc004f050 - invalid product key.

  When I bought the laptop it says she is ready for Windows 10 and I expect an update would probably work, but I would like to start with a clean install.

  You must first upgrade your installation windows 8.1 for Windows 10. This also increases your key win8.1 to win10. After that, you can cleanly reinstall Win10 without any problem. Just make sure that the upgrade of Win10 have been activated.

  I've now upgraded a for my G70-70 of my own Win8.1 installed to Win10, through the upgrade of Windows Update & it but went well. The only thing I used to do was install the latest nVidia drivers.

• I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to

  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to
  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  Relax and breathe.

  FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• help clean install of Windows 7 for my laptop...

  Hey, I'm on Toshiba Satellite C655-S5312 which was pre installed with Windows 7 home premium ... now it becomes slow... I did a System Recovary... .but yet its slow start... .some time now, I think for a dry-cleaning facility and I have my Installed windows 7 activation key... so do a clean install with a original iso file of windows 7 Home premium 64 bit... which i torrent download using this activation key? Please do emotional assistance... I thank you for reading this ...

  It should work.

  I used a purchased copy of Windows 7 to do a fresh install of Windows 7 installed OEM by using the same key as the OEM.  During the installation it ask for the product key and I had to skip that part until the new facility is completed. The reason to skip the product key during the installation is because it looks like "Invalid product key" or something along that line. Then I right click My Computer\Properties and at the bottom of the page click on change the product key and seized the key for the OEM. He was then accepted and activated Windows. Good luck with it.

• recovery of lost bitlocker keys and unable to clean install windows 7

  Hi friends,

  Two days back, I used bitlocker in my windows 7. At this point, I forgot to save the Bitlocker recovery key in an external drive and saved in the internal hard drive. The next day, when I started the laptop does not start and the key demand of bitlocker recovery which I don't own. For this reason, I am unable to boot my system. Then I tried clean install the OS with my recovery of windows 7 dvd. But at that time also he asks me to disable the Bitlocker for which I'm not having the recovery key. So I'm not able to clean install the OS also. So how could I solve this problem and make my laptop works properly.

  If someone knows how to fix this please tell me.

  I don't use BitLocker, so I can't confirm your request. If it is correct that I would use a third party tool to repartition the disk. Here are some candidates:

  • Acronis Disk Director (cost money)
  • Boot of Ubuntu CD (http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windows-computer/) (free)
  • Connect the drive as a slave drive to some other PC.