Clean the list of names

Similar Questions

• How can I copy the list of names of files in the finder and set the Clipboard filenames separated by commas?

  Hi guys, I was wonder if anyone can give me a hand with a script.

  I need to be able to paste a list of file names of the files as follows:

  0001.jpg 0002.jpg 0003.jpg 0004.jpg

  At the moment, if I select the files in the Finder, copy to the Clipboard and paste them in TextEdit, they are like this:

  0001.jpg

  0002.jpg

  0003.jpg

  0004.jpg

  I found a similar but slightly different script and I don't know how to change it. Here it is:

  Define extension_list to {"jpg", "" JPG","jpeg","JPEG"}

  the value cbNames (Clipboard text) paragraphs

  Set csvNames to {}

  the tid value delimiters to point to the text of the AppleScript

  the text value of the AppleScript point delimiters ".»

  -now, make a list of names without extensions

  Repeat with the names in cbNames

  If the point 2 of the text names is extension_list then

  copy of text 1 of names at the end of csvNames

  end if

  end repeat

  Journal csvNames

  -now the filenames as comma CONCATENATE string separated

  the text value of the point delimiters AppleScript «»

  csvNames value cross-as text

  the text value of the point AppleScript delimiters tid

  There is an easier way. Open a TextEdit document and paste the list in. Place the cursor at the end of the first item and drag it to the start of the second.

  

  Press on + command + c to copy and then command + f to bring up find it. Press command + v (do not click in the first search field). Check the 'Replace' box, click in the field replace, and then type a comma and a space.

  

  Click 'All' and then 'done '.

  

• Can I copy the list of names of files and paste them into a table

  I have a list of files in a folder and here paste the titles only in a table

  You can create a list of text files by using the command prompt.

  • Open a command prompt in the folder that you want to get the list of. (You can open a command prompt and navigate to your required file, or use the Solution Explorer and press and right click on your file at the same time. Then you should see "open a command here window' in the menu - click on it.)
  • Enter the command "dir /b > filenames.txt" (without the quotes), then simply type dir /b > filenames.txtand press return/enter to transport.
    
  • Use Explorer to navigate to your file and you should now see a text file called filenames.txt. Open and it must contain a list of files. Then, copy and paste the list where you want to.

  If all goes well, I understood your question correctly, if so, hope it helps.

  
  

  
  

  
  

• How to import the list of names of VM and opposed a script of the imported virtual machines list

  Hi guys,.

  Can someone help me and integrate a csv import script (which contains a list of VMS) and ran the script against the VMs imported to create a CSV output below? Thank you very much in advance.

  SE connect-VIServer xxxxxxxx

  $date = get-Date-format-M - d - yyyy

  . 'c:\Users\xxxx\test\test2\scripts\xxx scripts\Get - FolderPath.ps1'

  $folders = get-file-type vm | Get-FolderPath | Sort-Object Id

  {Set-Path function

  Param ($Object)

  foreach ($folder IN $folders) {}

  If ($folder. ID - eq $Object.Id) {}

  $result = $folder. Path

  breaking

  }

  }

  $result

  }

  Get - VM vditest - 1.xxx.internal | Select-Object - property Name,@{N='Datacenter'; E={$_| Get-Datacenter}},@{N='Cluster'; E={$_. VMHost.Parent}},

  NumCPU,MemoryGB,ProvisionedSpaceGB,@{N='Path'; E={($_. Folder | Get - FolderPath). Path}},@{N='FolderID'; E = {$_.folder.} ID}} | Export-Csv "C:\test\vm-xxx-$date.csv" - NoTypeInformation - UseCulture

  Try something like below script

  It assumes that your CSV file looks like this

  'Name '.

  "VM1.

  "VM2.

  The script

  VM.csv Import-Csv - UseCulture | %{

  Get-VM-name $_. Name |

  Select Name,

  @{N = 'Center'; E = {Get-Datacenter - VM $_______ |} {{Select - ExpandProperty name}}.

  @{N = "Cluster"; E = {Get-Cluster - VM $_______ |} {{Select - ExpandProperty name}}.

  NumCpu, MemoryGB,

  ProvisionedSpaceGB,

  @{N = "Path"; E = {}

  $current = get-view $_. ExtensionData.Parent

  $path = $_. Name

  {}

  $parent = $current

  if($parent.) Name - only "vm") {$path = $parent. {Name + "\" + $path}

  $current is get-view $current. Parent

  } While ($current. Parent - no $null)

  [channel]: join ('-',($path.)) Split('\') [0.. ($path). Split('\'). (Count-2)]))

  }},

  FolderId

  }

• Insert the list of names of link on the current page to the current text insertion point?

  Hello

  I need to automate the insertion of a list of the names of the links located on the page current / active to the blinker current text. (I forgot the technical name of the thing of blinking text line).

  Thank you!

  That would be "cursor" (apparently taken from Latin, 'Messenger', not a person who cursed a lot).

  This javascript does the trick. He first tries to determine the page, which is a bit awkward because the text blocks can be nested, on a master page, or on the pasteboard. If the script "does nothing, then closes" (quite a common mistake) or error, this would be a place likely to fail.

  If he has found its own page, it's a simple case of iterating over all the graphics on this page, which is fortunately a property 'Page '.

  theStoriesPage = app.selection[0].parentTextFrames[0];
  while (1)
  {
   theStoriesPage = theStoriesPage.parent;
   if (theStoriesPage.constructor.name == "Page")
    break;
   if (theStoriesPage.constructor.name == "Character")
    theStoriesPage = theStoriesPage.parentTextFrames[0];
   if (theStoriesPage.constructor.name == "Spread" || theStoriesPage.constructor.name == "MasterSpread")
    exit(0);
  }
  for (all=0; all		   

• My Windows Live Mail is sorted in alphabetical order by family name, but now, when I add a new contact, it is positioned at the top of the list instead being placed in the right place alphabetical.

  My direct mail is sorted in alphabetical order by family name, but now, when I add a new contact, it is positioned at the top of the list instead being placed in the right place alphabetical.  How to load the list of contacts to organize all contacts, including contacts, in alphabetical order by family name?

  E-mail address is removed from the privacy *.

  My direct mail is sorted in alphabetical order by family name,

  It is not clear what you mean by this statement.

  • There is an option in the contacts window in kind (names) of > name -is that what you mean?
  • Or that, when you open / switch to the contacts window, you see a list sorted by last name?
  • Or that when you click on to... or start typing in the to... box in a message composition window, you see a list ('contact selector') sorted by family name?

  Only in contact with an e-mail address will appear in the "Chooser". The list includes names in alphabetical order. For contacts with a first name and a registered name , the list will be sorted based on the preference granted to sort by in the Contacts window. Contacts with multiple email addresses will appear once for each address with the address in brackets after the name.

  Name is a special value built by WLMail contact data fields. It will consist of the first match found during the analysis of the data fields in the following order:

  1. Nickname
  2. First name + last name (in the order specified to sort by in the Contacts window)
  3. First name or last name
  4. Company
  5. E-mail address
  As you start typing in of... box, WLMail will present a list of matching entries in your contacts list. You can start typing username, first name, first name, company, e-mail address to a contact or any significant word in the Notes field for this contact. So, if you type bil, for example, the list that appears will include
  • any person whose nickname starts with Bil, e.g. Billyboy
  • any person whose first name begins with Bil, e.g. of Bilbo Baggins
  • anyone whose first name begins with Bil, for example Jim Bilko
  • everyone whose company name starts with Bil, e.g. Billingsgate Market
  • everyone with an address of e-mail from bil bil or just after a period or the ' @' symbol, for example "the bilbo at hotmail dot com" or "jim to billingsgate dot com" or "jim.bilko at hotmail dot com.
  • all categories whose name contains a word starting with bil

  If this does not solve your problem, please post your question in the forum dedicated to contacts in Windows Live Mail.

  Noel

• InDesign - prevent breaks between the first and last names in a very long list of names?

  Is there a quick way to do?  Having the list 800 names in a text box and want to prevent the first & last names being split at the end of the line.  Other than choosing each name and apply the rule "no break" (a lot of time).  Any other suggestions?

  This is a more elegant solution:

  (?<=[\l\u]) (?="">

  Apply style: no pause

  It detects all single space between two letters

• BlackBerry smartphones to synchronize the list of contacts to pc and BB 9800 Torch

  I just spent several hours cleaning to the top of my list of contacts Outlook 2003.

  I had a lot of numbers (hundreds) in my new BB torch that came with my old mobile phone SIM card.  I had a lot of e-mails (a few hundred) in my pc, but no phone number.  So I synchronize had the two databases and then cleaned the list combined on my pc. "Purified upward" means that I did of course e-mail addresses and phone numbers have been implemented for each contact in my Outlook contacts list combined.   Then I re-sync had two devices.

  Everything is there on both devices. I had arranged with care all the names with the last name first on my pc contacts list, BUT what I have on my BB was first a meli melo some with first name and some with first name first.  AAARG!  How frustrating after spending all this time.

  What areas the BB bed from Outlook?  There are 3 places in Outlook, where his name appears. The first and last name may not be in the same position in all 3 premier-dernier places.  Someone at - there no indication in this regard?  Thank you.

  Peter

  Your suggestion for a solution to my problem was phenomenal.  It lead me to a better understanding of my BB and Outlook.  My problem was with my name entries in Outlook.  I was inconsistent with the name entered.  I straightened them and now all is well.  Thank you.  Peter

• ID/faces of the people in the Sierra pictures, pulling up the non-functional names

  Someone knows how to fix this? Is it a new setting I'm missing? I've already sent feedback to Apple.

  Photos, when I come across a photo of a person without a name, I can click on the field "no name" and a list of names appears. In the Sierra, however, the list includes names of new non-functional based on the e-mail addresses that are causing problems with my library.

  For example, if I type my name, I see three suggestions:

  1. my full name, with the thumbnail associated with my Photos 'face '.

  2. my full name with my email from Apple below address and the photo of my Contacts entry

  3. my full name with a secondary e-mail, which I have also listed in Contacts, with no tile

  If I take 1, everything works as usual.

  If I take 2 or 3, Photos makes a new person with just my name. It does not automatically fill in the rest of my name. I find myself with two entrances of the person, one with my full name and one with my name. I then merge these. This happens with all the people, not just me.

  I have the same problem. When I want to manually add a face without a name/person, I get very often 2 proposals:

  (1) the person sought with the profile photo, the first name and family name. If a picture is displayed, this means that I have already assigned photos to this person.

  (2) the same person, with or without a profile picture, with name, surname and e-mail. This proposal seems to come from my contacts, because it shows the same profile photo and mail the address I have for this person in my contacts.

  If I add the photo to the contact person, the person is added as a person in Photos. But with only the name, not the name, which is a little ridiculous, especially when you are systematically adding people and having many with the same name.

  I merge the two to get back 1 "individual" in photos, with first and last name (first and last).

  So somehow Photos is not capable of matching 'people' in photos to anyone in my contacts list. Even when you merged the two and said Photos this way they need to be put in correspondence.

• NETGEAR does not appear on the list

  I'm trying to connect my laptop for wifi but netgear does not appear on the list of names to choose from.

  Can you tell us what model of router you have, for example, R7000? The router is new? Has buttons on the front panel for enabling / disabling WiFi, if so you tried pressing them?

• How to export the list of internal users from VPN 3005 concentrator?

  I would like to be able to export the list of users for the purpose of documentation. Is this possible to do with the 3005?

  Thank you

  Raul

  It's not easy passing just to get the list of name of user, but you can get the whole config and then grab users ot there in a couple of ways.

  In XML format, which is easier to read, go to Admin - Mgmt - XML Export file and export the config file to any file name. Then under the file Mgmt section this file that will appear in a separate window. Search to find the sections of the user names and passwords.

  Text (a bit like an in the Windows .ini file), go to settings to access Admin - rights of access - and no Config File Encryption value. Save the configuration. Then go to file Mgmt and display the CONFIGURATION file, search for [user *. 1] to find all of the names of users and their values. This way is not very useful to be honest.

• How to display a list of names by category

  I am creating a Setup for a web site of Airshow where volunteers can apply online and specify their favorite activity. The airport manager will then assign volunteers to an activity and we would like a list of people devoted to each activity, per day - as aerospace will run for 3 days. There are about 10 activities.

  I know I could create about 30 recordsets (10 for each day) and then you view the list of names for each activity in a table, but it seems to me that there should be a more elegant way. I think that I could create 3 sets of records, one for each day and then view a list sorted by name of volunteer activity. Basically, I would like to have something that looks like this for each day:

  Activity 1

  -Name 1

  -Name 2

  -appoint the 3

  Activity 2

  -name 4

  -quote 5

  Activity 3

  -name 6

  etc.

  I use DW CS4 with PHP/MySQL.

  Thanks a lot for any assistance before you begin creating recordsets from 30.

  <>
  initialize a variable to store a history of activities
  $previous = ' ';

  {? >}
            <>
  If ($row_rsVolunteersFriday ['assignedactivity']! = $previous)
  {echo "'." "} $row_rsVolunteersFriday ["assignedactivity"]. »
  ";
  echo $row_rsVolunteersFriday ["firstname"]. » ";
  echo $row_rsVolunteersFriday ["lastname"]. »
  ";
  keep the current name in the variable $previous
  $previous = $row_rsVolunteersFriday ["assignedactivity"];
  }

  on the other
  {echo $row_rsVolunteersFriday ["firstname"]. » ";
  echo $row_rsVolunteersFriday ["lastname"]. »
  ";
  }
  ?>

• How can I remove a user name to appear on the list because he's wrong my password added to it.

  I want my user name appears when I start typing, so I don't have to type it every time. But I typed in my password error before that the username has been entered, and now a username with my password appears in the list when I enter the first letter. How can I delete this entry without removing the history of usernames?

  See:

  • Removal of the individual form entries

• On my old e-mail account I could insert a list of addresses by putting the list name in the to: my new email account will not accept the list names. How can I fix th

  My old Thunderbird e-mail account has been with Time Warner,
  SC. RR.com. my new second account) is with AT & T, ATT.net.

  In my old account I could give a name to a list of multiple e-mail accounts, put the name of lists at the BBC: and send email to everyone on the list.
  My new account will not accept the name of a list. He insists on the format of a single e-mail account. I tried to create a new list after closing the old account and open the new one, but the results were the same.

  How to make 'list' to work on my new ATT account?

  I'm glad to hear that your problem has been resolved, please select the answer that solved the problem. This will help other users with similar problems more easily find the solution.

  Please contact the Mozilla Support!

• How to fix: after upgrade to 31.1, using the list of group name does not, gives the messages this name "is not a valid email address."

  Before the upgrade, I often type in the group alias in the address box, and fills the name of the group. But now when I try to send the message, I get an error that the name that appears "is not a valid email address" and then details how to train the appropriate addresses.

  I deleted the list of my address book personal and recreated to address in my CAP, but the error persists. I have to manually add individual addresses.

  I tried selecting the group from the list in the Contacts pane instead of typing the alias, no change.

  I'm doing something wrong?

  -Mike

  I have new information on this subject.

  It looks like this bug. If you have a Bugzilla account, it would be useful to vote for this issue.

  It seems that lists with a description that includes several words have this problem. The bug report suggests to replace whites "" between the words in the descriptions of these lists with an underscore "_".

  If you don't want to change your descriptions, the other workaround provided still works.