Clean the TMS database.

Similar Questions

• How to clean the Oracle database?

  Dear gurus and DBA. My company wants to give old computer at the local school. We have the Oracle database on this server. My boss want to make sure that the school not getting all the Oracle data. Some data bank is and must be a secret. The Bank's major customer and so exposed information, it means big problem for us. Ideas you might have appreicated. Thank you.

  >

  Hi Rajiv,

  Dear gurus and DBA. My company wants to give old computer at the local school.
  We have the Oracle database on this server. My boss want to make sure that the school
  not all Oracle data. Some data bank is and must be a secret.
  The Bank's major customer and so exposed information, it means big problem for us.
  Ideas you might have appreicated. Thank you.

  DBAN is your man - even not God could get information about a Dban disk ' ed - get it [url http://www.dban.org/] here.

  I have some work for a charity that sends computers in East Africa a few years ago.
  These PC came from banks, insurance companies, lawyers & law firms - a lot of
  potentially sensitive data. Much of the company to simply delete the
  files, which, as we all know is not really effective.

  The first thing we did with each machine was Dban them - no work allowed the
  any PC until it had a sticker of Dban top. Never had any problems.

  HTH,

  Paul...

  Published by: Paulie July 22, 2012 00:26

  Published by: Paulie July 22, 2012 00:27

• TMS database name

  Is it easy to rename an existing MSDS database or create one from scratch, which is different from the standard denomination.

  I can't seem to find options to repoint to a new database, and I did not know if the installation process would find the DB if it was something else that references the install document.

  In all previous versions, the TMS database is called "tmsng" - is not able to be changed.

  In the latest version (TMS 14.4.2), when you run the TMS tools, it seems that you are able to change the "tmsng" (I have not tried to confirm if it works or not) as directed by the attached screenshot.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• where the Cisco TMS database knowledge guidance document?

  The TMS Installation done doc refers to the following doc:

  Cisco TelePresence Management Suite database knowledge tips

  D14216

  But I can't find it on CCO.

  Does anyone have a copy of that PDF?

  The copy that I named:

  Guide to setting up Cisco TMS SQL database product

  December 2010 D14216.01

  A little outdated.

  Rgds, Geert Folens.

  Looks like it is available online:

  http://www.manualslib.com/manual/408637/Tandberg-TMS-SQL-database-configuration-guide.html

• TrueSuite Fingerprint error "error: could not open the specified database.

  Hello

  I bought new Toshiba Satellite P300-PSPCCA two weeks back and fingerprints worked very well. Suddnlly stoped working. I was getting connection to fingerprint for the unavailable error message when I start my laptop. I try uninstalling and reintalling software Truesuite and dirvers but no luck. I downloaded the latest version of the software from toshiba Web site but still no luck.
  I was looking for a solution and I have read on several forums that must back the driver, if who does not then the only solution would be the factory default setting.

  I try to roll back the drivers, but still, it does not solve the problem. Finally, I put my laptop to factory default and still having the same error message...
  I also tried to delete all fingerprints via the Truesuite software but I get "error: failed to remove fingerprints...

  It has no option in the bios to wipe the fingerprints of memory... because I saw in IBM there is option in the bios to remove the fingerprint via bios... but not at toshiba...

  I really need help with my problem... Please... someone help me...

  Kind regards
  Jay

  Hello

  These questions are not easy to solve. Many people have noticed problems with this software and everything what you have done is OK, but one thing is strange to me.
  After the new installation of the operating system using the Toshiba recovery image everything should work perfectly. After doing this you have the same situation as after the purchase and start. Then I don't understand how you can have this problem again. The fact is that the stored data will be removed by cleaning the drive HARD or OS recovery to factory default state.

  On this forum, you will find many similar topics. Please put impossible to open the database specified as search terms in the advanced search option and check the listed topics. You may find the final answer.

  Good luck!

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How to clean the monitor of NetFlow data

  Hello people.

  I activated the NetFlow monitor on some routers, it collected data since 2 months ago. I noticed that NetFlow monitor uses more space to store data, so I was wondering if there is a way to clean up this data?

  The current the NMS database is running on SQL Server 2008 R2.

  Thanks in advance for your help.

  Hello

  Run this query on your DB NEM, and it will give you the results you're looking for.

  http://communities.quest.com/docs/doc-14838

  Thank you.

• POC: How to clean the tables dbo. ActivityInstance and dbo. ActivityInstance

  Hello

  I am looking for a procedure to clean the tables dbo. ActivityInstance and dbo. ActivityInstance in the OrchestratorProcess of Cisco Process Orchestrator 3.0 database

  Is there a parameter must be equal to the CPO database to automatically activate an own? Y at - it a parameter setting in the order?

  Concerning

  Hello!

  I think you are looking for to empty ActivityInstance and ActivitiyInstanceArchive in the process of the CPO DB. Have you noticed they are very rich in number of lines or?

  The works of CPO way are like that...

  (1) process run and store this data in the * Instance tables (ActivityInstance, ProcessInstance, etc.)

  (2) once they reach a terminal State (successful, failed, etc.), they are migrated on to the * InstanceArchive tables (ActivitiyInstanceArchive, ProcessInstanceArchive, etc.)

  (3) the GROOMS server process DB every night (by default at 23:00 server time) and deletes the old processes off based on your settings

  So a few things here to watch...

  (1) what are your settings of cleaning? You can check under Administration-> database settings. Right-click on the DB process-> properties. Click on Configuration. You want to watch the 'grooming of process Instances. By default, it's 15 days worth of data, but they may not be aggressive enough for you... so you can change out there. You can also click on the button 'Groom Now' and force a groom to arrive just here and or wait for the server is doing during the night. This will remove things from the * archive tables * ONLY * however.

  (2) make sure that you check not a ton of custom process. You should always consider what you and aren't archiving in your system. If you need help determining / looking at this TAC case would be a good start and they can help or contact me and I can watch as well.

  There might be a chance of grooming fails for some reason any, however, if this would be the case (and you could see to the title of operations-> audit, then you will need to open a TAC case and submit journals so support can view them and see what happens.

  Finally, if you are just looking to delete all lines through SQL in these tables and understand the possible problems that come with, (again), you open a TAC case and they could provide you with queries SQL to do such. The preference would be to not to post such things here, as it's supposed to be a Cisco support activity and not something we want to people all the time. It's really something of type resort last and normally means that you have a larger ongoing problem to take a look at TAC.

  -Shaun Roberts

  Technical leader, Services

  [email protected] / * /.

• How to delete the old database?

  Hello

  I work with a SQLite database. However, I am getting intermittent behaviour of my app in the Simulator. I suspect it's because while developing, I have to go hard the Simulator and leave the database in an unknown state.

  How clear/clear the old database I know I start the application of a known state? I tried to use clean.bat, but I have not had success with it yet.

  Thank you

  My apologies - shnuffy had right the first time. I have now found the directory where the database is stored. As shnuffy says: device/Blackberry/system/appdata/rim/webstorage /...

• Replace the TMS device

  Hi all

  I only appliance TMS with VCS and TMSagents (applications MOVI), then my TMS has error and had to be replaced by a new.

  is there any procedure to do this replacement for the TMS have TMSagents with VCS to ensure that replication will not be problem. Sorry, I just worriying on replication to be failed.

  because I have a large number of users MOVI.

  Thank you all

  Hello Kalinda

  What kind of error you see on the server of TMS? Maybe the ist possible to fix it?

  Before you replace your server TMS device, you need schedule downtime for maintenance.

  You should back up your sql database and the agent MSDS database. Then install the new TMS server with the corresponding version of the former and restore and backup agent MSDS database. You can then enable replication again.

  Keep in mind that the TMS appliance server is EOL and EOS, but also you can be able to take advantage of the Cisco migration program.

  Please visit this link:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11316/ps11338/end_of_life_notice_c51-683062.html

  Concerning

  Rafal

• Migration of the TMS Movi/Jabber manually created the AD users

  I have a lot (75) of users created manually Movi/Jabber in TMS. When we turn to the AD authentication what is happening the old-fashioned manually created accounts? Have they disappeared? In addition, accounts created manually have the same username as their counterparts in AD. Which will cause a problem?

  Thanks advance!

  Douglas,

  I tested in the laboratory and it does not matter the user of the AD, it gives an error.

  

  Given that I had already 'Michael Schumacher' user added in the local database with the same login name database with AD synchronization does not matter the user and generates the error.

  I use TMS PE and TMS 14.3.2

  Concerning

  Alok

• Do we need the intermediate database if a single execution in real-time duplicate controls with the connector for Siebel Disqualification?

  Still confused:

  Do we need a staging database? We want only to perform real-time duplicate checks.

  Documentation (Guide to integration of Siebel, Oracle® Enterprise Data quality customer Data Service Pack, Version 9.0, April 2013) is not quite clear about this:

  "The staging database is used by the Siebel connector as a staging area for the transfer of data between Siebel and Disqualification when running batch through Data Quality Manager of Siebel." (p. 19)
  

  "The interface in real time of the Disqualification is also used for the batch cleaning tasks (normalization): Siebel sends each record selected for treatment to the Disqualification by batch cleaning web services." (p. 6)
  

  «Double the lot identification and quality of data health check jobs (either full or incremental batch) use interface batch Disqualification.» In this case, the candidate registers for correspondence or health checkups are written to the database shared staging, Disqualification executes a batch on these records and - if pairing - rewritten matches, Siebel picks up and uses to link together the records. "(p. 6)

  
  

  However, for a design it is necessary to plan in advance, if a database is required or not.

  Any suggestions?

  Hello

  The staging database is used only for temporary storage where the interface between Siebel and Disqualification batch is used. It is not necessary at all if only using the interface in real time. Note that some of the 'batch' in Siebel tasks actually use the interface in real time - this applies to all data in batch cleaning jobs in Siebel and also for the workflow "UCM lot" which is in fact orchestrated by calling web services Disqualification.

  In general, the batch interface is only used where Disqualification is attached to Siebel CRM (instead of UCM). Because DQ Siebel lots do not call survival (so that you can only link to potential duplicates together).

  Note that the tables key used for the selection of the candidates belong to the Siebel database in the form of standard tables (S_DQ_CON_KEY and S_DQ_ACC_KEY). They are not in the database shared staging. The staging database is used ONLY for the data transfer for treatment in batches. It seems that you are not intending to use this interface.

  Also note that Disqualification still needs its own repository database, but if you use only a Disqualification in real-time (and not, for example, by using a Disqualification to batch migrate data in Siebel using the interface of the EIM), it should probably not push the database this hard.

  Kind regards

  Mike

• The consecutive processes share the same database session?

  Assuming that we have two processes on the same page, which are performed one after the other. Can we depend on that they are running within the same database session?
  
  For example it is possible to define a database (sys_context) context in the first process, and refer to this context within a second (e.g. process DML).
  
  Or asking in other words: is the session DB from the pool of connections apex reused or returned to the connection pool after the first process?
  
  It's a little difficult to control, because only the negative case would be suffient to say it doesn't work that way. Just because the 10 tests on 10 worked will not guarantee that it is always the case.
  
  Published by: Sven w. on June 28, 2012 15:04 - typo correction

  Sven wrote:
  Assuming that we have two processes on the same page, which are performed one after the other. Can we depend on that they are running within the same database session?

  For example it is possible to define a database (sys_context) context in the first process, and refer to this context within a second (e.g. process DML).

  Or asking in other words: is the session DB from the pool of connections apex reused or returned to the connection pool after the first process?

  The same session of database is used for the duration of 'see the page' or 'accept the page' request. If a 'direct branch' (direction of the page without using the redirect) takes place after "accept page" the same session of treatment, is used to display the new page. See the use attributes initialization PL/SQL/cleaning of Code PL/SQL Code .

  However, several operations may be involved, as APEX will issue engages on different session state changes.

• Installation of VirtualCenter migration with the new database

  I have an existing installation of Virtual Center and sql server that was installed by an employee of the past. The installation needs cleaning and migration.

  So I decided to prepare a new physical server to host a new installation of VirtualCenter and another SQL Server. I installed VirtualCenter, and the database was created. But now I'm starting to think that she can't be as easy as adding ESX hosts to the installartion of Vcenter new/database and update the IP of the server for the hearbeat.

  So I have a few questions:

  (1) if I disconnect the old installation of VirtualCenter and ESX hosts, add them to the new facility, my storage adapters will remain intact?

  (2) I'll currupt one of my virtual machines on ESX host?

  If I can lose data, I'll obviously have to migrate the existing database, rather than nine.

  You can unplug and remove the hosts of their current instance of vCenter and then add the host in the new.  Don't hurt your VM.  You do not also lose connection also well to the storage fabric.

  Just keep in mind that moving to a new instance of vCenter will lose you all the performance and historical data as well as any rules DRS/HA, pools of resources, permissions, roles, etc.

• Inserting data in the Access database via page Apex.

  Dear friends,
  
  As I mentioned earlier that the Access database was related to oracle by ODCB and HS. Now I m able to insert, remove update data in access database of oracle10g XE.
  
  Now, I want to know how to enter the data access through the apex page?
  
  I use apex 4.1.
  
  Concerning
  Kamran

  Hello Ken,

  I totally understand your condition. In fact, we do not want to refuse to help, but try to keep the 'clean' forums It helps you, because there are more experts in the APEX APEX forum here, and it helps others who could search for similar problems (which they could / should do as well).
  But as I discovered (with respect to the time of my previous post) you have already opened a new thread in the appropriate forum: {: identifier of the thread = 2363019}
  So please be that close this thread here.

  Thank you

  Udo