clean up the code

Similar Questions

• How to clean up the code after pressing

  Hey,.

  I am trying to run a program that controls a remote power supply.  The way the supply (BK precision 1786-B) is controlled is by writing a table hexagonal 26 bytes with specific addresses for each order (20 = setting the remote control, 21 = exit of the State of tension, 23 = 24 = current, voltage, etc.)  The way I am connect to the electric grid is by sending the code through the base set, read and write of VI.  He worked phenomially.  I would like my program to activate the remote control, on the State of the output, beginning of rising tension at a rate fixed and then when desired pressure is reached, you press the stop button and the last command to set the return to zero voltage and performance status turned off before the end of the whole of the program.   The thing I ask is the opportunity to set the voltage to zero directly after that I have the most important press stop.  I'm controlling a chip peltier and what happens, is that when I restart the computer, the chip will be a climb to a high voltage before resetting because of the code.

  Any thoughts?

  Thank you

  Katie

  
  

• I hated W8, how do I reinstall the W7? Given that I don't have the installation CD, only the CODE.

  I hated W8, how do I reinstall the W7? Given that I don't have the installation CD, only the CODE that is in the back of the laptop.
  My laptop is HP Pavilion g7-2114so.

  Hello

  You can create a Windows 7 installation disc yourself - just download the good Disk Image ( must be the same version that originally came with your laptop - IE Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• HP Stream: Disable the Code 59010962

  I am at a loss with this Code to disable the HP flow. For normal BIOS, no problem. I would normally reboot USB or disk, but not with the flow. I have a Disable Code 59010962. If anyone can help with this?

  In addition, I noticed a lot of comments on this with Solutions solved. Fantastic. My question is "how to make a copy of the Codes reference so I can do the same thing?  The reason I ask this is that I have clean the computers to a local Pawn Shop. Normally, I would use a USB key or recovery for Windows 10 methods, but this confusing me.

  Thanks in advance for any help.

  Respectfully,.

  John

  Analyst.

  This can help for the future.

  http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-BIOS.html

  "HP ProBooks and EliteBook." It is for those who do not need to be shotgunned.

  Download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Select 'of FIRST BROADCAST.

  Then select the model.

  After the restart to repeat, same as above but this time SELECT 'SECOND RUN.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  More details here.

  http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-password-reset-utility

  It is for those who must be shotgunned.

  Download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked portable flash drive and boot. "" If the HARD drive is installed, remove before starting.

  At C:\OUTPUT, type CD...   "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Given that your model is not listed, select "SHOTGUN".

  After the reboot, repeat 'SHOTGUN' a second time.

  I would like to know the result, so I can update my list.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  Additional help here.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility?s=ad18a86dbbaf34999e22b1225a42a395

  REO

  

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I activate Windows XP after a crash when I can't read the code of computer-based product

  Also I would upgrade but I can't get into Windows because I can't read the code of the product.  I took be cleaned as I believe somehow that I caught a virus... they made a temporary activationsl, I suppose, Windows XP because they could not read the product either code.

  I would like to contact Microsoft support. Explain your situation and they should be able to deliver a readable product key. You can get the number here

• not reflecting is not the code added to the Simulator

  Hello. I have the problem that, in a single class if I join the code its not reflecting only not in a simulator, I cleaned the Simulator and the project and even restarted eclipes but I am facing the same problem... CAN SOMEONE HELP ME.

  I suppose that would do the necessary cleaning. try resetting the Simulator (under File--> Reset)

  just do control under Simulator folder if there is any file of cod by your project name.

  Abhijit-

• 'shellExecuteEx failed; "170 the requested resource is in use of the code"

  I'm unable to install all of the .exe files or even use system restore. Error message read; 'shellExecuteEx failed; 170 the requested resource is in use of the code "." I already ran a series of antivirus and anti software spies scans (NPE, Avast, Mbam, Iobit, Win defender) and found nothing. I can't even udate some of my drivers with full administrator privileges.

  Laptop ASUS A53E W7 64-bit

  Hi Shaw,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem together.

  If I understand correctly, you are unable to install programs on Windows 7.

  Let us try the following methods:

   

  Method 1: Run the following fix - it to repair corrupt windows installation files:

   

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/program_install_and_uninstall

   

  Method 2: SFC scanner.

  SFC scanner. System File Checker (SFC) scan will replace the missing or corrupted system files on your computer.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files:

  http://support.Microsoft.com/kb/929833

   

  Method 3: Put the computer in a clean boot state, then try to install it and see if that helps:

  A clean boot to test if any element of service or third party application startup is causing this issue.

   

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 article to start on normal startup.

   

  Hope the helps of information. Reply with more information if you need further assistance, we will be happy to help you.

• Copy and paste the code which gives different results

  I use PS CS5 and need to copy and paste the code from one page to another. The reason is that the only difference is a change in the images and titles.

  When I view the page copied in a browser the table continues beyond the wrapper div and none of the images are visible.

  Here is the copied code:

  <! DOCTYPE HTML > < html lang = "en" >

  < html >

  Head of <>< name meta = "robots" content = "INDEX, FOLLOW" / >

  < name meta = "robots" content = "noimageindex" / >

  < name meta = "description" content = "Ace with checkered flag logo" / >

  < name meta = "keywords" content = "Top Trumps, Ace, flag at checkerboard, Classic Cars, drag racing, heavy trucks, 500 miles of Indianapolis, International bus, luxury cars, luxury cars Made in Germany, Yachts of luxury, the NASA Super Jets, cars, Rolls-Royce, Street Bikes, street cruisers, Super-Bikes, Super Sonics, Super Trains in the world." / >

  < title > < /title > checkered flag

  < link href = "css/table.css" rel = "stylesheet" type = "text/css" media = "screen" > "

  < / head >

  < div id = 'wrapper' >

  < body >

  < div id = "bread crumbs" >

  < a title = "Return to Homepage" href = "index.html" > home < /a > & bull; < a title = "Go back to index of England" href = "england.html" > English Top Trumps < /a > & bull; "< a title ="Back to Ace Index"href ="... /... ' / index.html - ace "> Ace Index < /a >

  < / div >

  < div id = "banner logo" >

  "< img src ="... /... / images/title.jpg ">"

  < / div >

  < div id = "page title" > < flag checkerboard of h1 > < / h1 > < / div >

  < div id = "table" align = "center" >

  < table >

  < thead >

  < b >

  < th = "column" range > Classic Cars < /th >

  < th = "column" scope > < /th > Dragster

  < th = "column" scope > < /th > trucks

  < th = "column" scope > Indianapolis 500 < /th >

  < th = "column" scope > International bus < /th >

  < /tr >

  < / thead >

  < tbody >

  < b >

  < td > < img title = "cars classic Ace assets with the checkered flag" src = "images/futbol_yildizlari.gif" > < table >

  < td > < img title = "Dragster Ace assets with the checkered flag" src = "images/HP-ve - zumruduanka.gif" > < table >

  < td > < img title = "Trucks heavy Ace assets with the checkered flag" src = "images/hp_ve_ateskadehi.gif" > < table >

  < td > < img title = "Indianaplis 500 Ace assets with the checkered flag" src = "images/karayip_korsanlari.gif" > < table >

  "< td > < img title ="Bus International Ace assets with the checkered flag"src ="... /... / images/international_buses_ace.gif ' > < table >.

  < /tr >

  < b >

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < /tr >

  < / tbody >

  < thead >

  < b >

  < th = "column" scope > luxury car < /th >

  < th = "column" scope > luxury cars Made in Germany < /th >

  < th = "column" scope > < /th > Luxury Yachts

  < th = "column" scope > the NASA Super Jets < /th >

  < th = "column" scope > race cars < /th >

  < /tr >

  < / thead >

  < tbody >

  < b >

  "< td > < img title ="Luxury cars Ace assets with the checkered flag"src ="... /... /images/luxury-cars-ACE.gif' > < table >

  "< td > < img title ="Cars luxury Made in Germany Ace assets with the checkered flag"src ="... /... / images/Lux_Cars_Made.gif ' > < table >.

  "< td > < img title ="Luxury Yachts"src ="... /... / images/Luxury_Yachts.gif ' > < table >.

  "< td > < img title ="NASA Super Jets Ace with checkered flag"src ="... /... /images/NASA_Super-Jets_Ace.gif' > < table >

  "< td > < img title = 'Race Cars Ace with checkered flag' src = '... /... / images/Race_Cars.gif ' > < table >.

  < /tr >

  < b >

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < td > click on the < table > image

  < /tr >

  < / tbody >

  < /table >

  < / div >

  < div id = 'foot' >

  & copy; 2005-2016 Ultimate Top Trumps. All rights reserved < / div >

  < / body >

  < / html >

  Thanks in advance.

  At first glance, I see that you have a wrapper

  before the openingtag. You can't do that.

  Run the validator at http://validator.w3.org/nu for a list of your html of your page errors. Clean and your page should work fine.

• Will pay 6.5 break the Code?

  I'm having my site cleaned up, made the mobile environment, etc. It is one of the main Pages that has been mostly fixed https://woodsshop.com/Plans.htm

  I was with CS3 for editing my site and my web developer said that he violated the code, whatever that means.

  6.5 will do the same thing?

  If you create a sensitive site then Yes, CS3 can 'break' a few things. More likely your developer uses HTML5 and CSS3 to create the site. Neither was around during the days of contribute CS3. CS6.5 is fully compatible with both, so you won't have a problem. I suggest to work with your developer and testing before going full do.

  One thing to note. Contribute is endangered (not being day/developed by Adobe over) so maybe now would be a good time to discuss with your other means of developer to modify your site.

• Using Regular Expressions in the Code of edge

  Hello.

  I am quite new to the Edge Code but find it quite interesting to use.

  The find/replace feature is pretty but I got a little confused on how to use regular expression matching.

  I tried to clean up the coordinates of a file Adobe Edge animate full of 120.17px (heavy and less accurate)

  So basically you're looking \d+\.\d+px

  First of all, she says "use /re/ for regex" even though I know the Code is made for developers who * courses * know that it took me a little time to understand I should just put my regex between slashes.

  /\d+\.\d+PX/

  then the time comes to replace them. ALT-cmd-F and it says "replace".

  Puzzled again.

  Will I type my full sentence there? Maybe a «...» "written up somewhere around would avoid this question because, there, of course, a second field to come.

  And there, I got stuck.

  I can not find how to get the replacement of the model.

  tried to \1 $1 \1/ $1 / nothing seems to work... any hint of welcome.

  Franck,

  You are right that it does not work. I open a topic. Here is the link if you want to follow: https://github.com/adobe/brackets/issues/1861

  FYI, I know exactly how you want to replace the search results, but here are a few tips:

  You must set the text that you want to retrieve by using parentheses. Thus, for example, if you want the integer part of the number of the result, then your regexp would be: / (\d+)\.\d+px/

  Then you must specify the first result using $1, so (when it's fixed), you can use something like: $1px

  Thank you

  Randy

• How to avoid the width and height of the code when inserting a picture

  Hello

  When I write html codes, I try to use "Ctr + ALt + I" to insert an image in the html code. "the codes will show width and height, for example" < img src = "Add - btn.gif" alt = "" "width ="76"height ="25"/ >", you can see, the code is not clean enough, I must remove the width and height by hand, is there a way I can insert a picture, without codes with the width and height.

  Thank you.

  Frank

  Hello

  First of all, welcome to the forum.

  is it possible that I can insert a picture, without codes with the width and height.

  No without changing the actual code of the marker or create an extension for editing. The first is not recommended because it will change it on all the html code and you must also change the tag for each doctype, and the second takes a lot of time and also needs to be done for each doctype.

  PZ

• How do I paste the code to program

  I write about programming, and so I stick a lot of programming code in my articles. I wrote this code, because I test everything first.

  I'm trying to find out how to do this in the most simple in Dreamweaver. I found paste special, but it works so - so.

  I have this in my Perl script:

  If (a > 27 ") {}
  Print "looks like a is higher than 27 today\n;

  }

  So I want to take this piece of code and paste it into my HTML file, so that I get:

  < pre > if (a & gt; 27) {}
  print & quot; Looks like a is higher than 27 today\n & quot;

  } < / pre >

  If I use the text only, all line breaks are thrown away as I get everything on a single line:

  If (a > 27 ") {print" looks like a is higher than 27 today\n ";}}

  Which is useless. If I ask rather to keep the jumps of line and structure, and then select Preformatted before I go ahead, I get this:

  < pre > if (a & gt; 27) {< br >
  print & quot; Looks like a is higher than 27 today\n & quot; < br >

  } < / pre >

  Otherwise, the original line breaks are preserved and < BR > tags are added. At the same time the indentation is lost. Of course, I can go through the code to clean it upward, and everything by removing the tags < br > can be done with find/replace, restoring the indentation is more work.

  It should also be clear from the example, what made the collage in the Code view is not a good option.

  Am I missing something, or Dreamweaver offers no better alternative?

  I had the same problem. I write many pages of tutorial for C++ and c#, and this in DreamWeaver is a pain.

  So, I wrote this: http://www.cse.msu.edu/~cbowen/CodeTools.zip

  When you unpack, you will see a CodeTools.zxp file. I use CS6, and you should be able to install this using the Extensions Manager. I add a new menu Code to insert with two options pane. It will paste the Clipboard between

   and 

  with the <,>, and & translated into the appropriate HTML code. The second does the same thing except it sticks between

   and 

  . Since I have a standard style I use to code, assigns it automatically. Now, it is much faster than what I was doing in Expression Web.

• changes made to the code do not appear in the file swf, even trace instructions not.

  I just picked up a clients flex project and I can't get the app to reflect even a simple statement trace.

  Before that I took over, the project was built last successfully with the environment/sdk Flash Builder Beta 2. I have the latest version of Flash Builder 4.

  To import the project into FB4, I get a ton of errors.  Most of them, mainly because of changes made to the beta2 sdk for free.

  Some of the things that I fixed:

  -mx to library://ns.adobe.com/flex/mx library://ns.adobe.com/flex/halo namespace

  -player video count: many names of the State for the video player component had been changed, more correctly States had been added.  There are also other related component video and property names that needed to be updated.

  But I have corrected this and the application is finally able to compile (but with a few caveats the type of variable in double especially)

  The only thing is now that any change I make to the project is not reflected in the build (debug or release).  I have changed the existing traces, added additional traces. Nothing is displayed.  I even removed the applicationComplete property in the main.mxml.  Still, everything worked as nothing has changed.

  Also I can't debug the application.  Whenever I try to debug... Flash builder said... "Swf application contains no debug information required...". "

  Anyone has any idea how to even begin to tackle this? Any help or pointers would be greatly appreciated.

  Hello

  Have you tried to project-> 'clean' the project?

  Also, instead of wasting more time with the import, I try and create a new project in FB 4 and copy all the code sorce and assets in the new project. Flex 2 has been a long time ago.

  Mike

• Very strange... swf based on the server tries to access the code of local working copy, thrown a zero...

  In here is a strange folder...

  I have my Flex application.  I create the project and copy the swf got on my development server (192.168.100.110:511/devportal/) for testing... it works perfectly well.

  However, some of my testers to see an error (including me) which is odd.  When I run the swf file on the server for a specific function, I get an error of the null exception.  What is interesting is that the stack trace indicates that the error occurred in my local working copy of the code:

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  apps::AsrUtilization/togglePanel() [C:\Users\eloy91100636\Desktop\Portal\UserInterface\htd ocs\LABPortal\src\apps\AsrUtilization.mxml:722]
  apps::AsrUtilization/__callPanel_click() [C:\Users\eloy91100636\Desktop\Portal\UserInterfa ce\htdocs\LABPortal\src\apps\AsrUtilization.mxml:933]

  How does a SWF running on a separate machine explodes trying to reference a function in code to work on my pc?

  And who, is that some people, run the SWF fine with no error and it works clean while others run into this error.  I cleaned and recompiled the project and it does not solve the problem.

  Help!

  Adrian

  The stack trace indicates paths for the machine where it was compiled, so it's normal. Here's your testers running the versions of Flash Player? Ignore them the errors to the best of their ability.