Cleaning after uninstalling

Similar Questions

• Re: Satellite U300 - optical drive is no longer registered after uninstall of prog

  Hello

  Recently, I uninstalled a program for a DV camera on my Satellite U300. After uninstalling, I'm more able to use the optical drive. If I put a cd/dvd in the drive, it will be "launch" However he scored not with laptop computer in order to play. I tried the diagnostic test, but he jumps right in front of the optical drive as if it were not there.

  A software driver to uninstall also deleted for the optical drive, and, if so, is there anyway for me to get/download the driver without a full recovery losing all others is installed on the machine?

  Any received much notice!

  Hello

  Optical reader is present in Device Manager? If so, then remove it and restart your machine. After that, the player must be reinstalled automatically.
  If this isn't the case, then perform a check of the complete registry with some cleaning of recording software.

  Then make the first step.

  If this is not enough, then it would be best to restore your machine...

  See you soon

• battery CMOS does not start after uninstall "Neverwinter Nights"

  While start-up after uninstalling "Neverwinter Nights" I get CMOSbattery failure, please press ENTER to continue... How can I remove this warnig and go straight to the office?

  Hello

  What version of the operating system you are using on the computer?

  
  You can perform a clean boot and see if the error message still occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article
  
  You can also check out the link for more information:
  What is CMOS?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-CMOS
  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• desktop computer takes a long time to load after uninstall of netware

  Dear Pascal, recently, by chance, I installed the client service for Netware on my PC. He asked to restart the computer, and after reboot, logon screens became classic. I uninstalled netware by accessing the properties of LAN. I managed to restore logon screens using Microsoft resources available on the net. However, my PC now takes * for long time for the desktop icons and toolbar are displayed. I use Microsoft Windows XP Version 2002 SP3, Intel Core2Duo processor P8600 @2.40 Ghz with 2 GB of RAM on Lenovo Thinkpad R400. I understand that it is after uninstalling the netware client that my office is very very slow. Help me for a faster loading of the desktop computer. Best regards, Reba Shankar

  Hey Reba,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  If I understand correctly, you have some performance issues on windows XP computer.

   

  Let us try the following steps:

   

  Method 1: Any installed program must be uninstalled from Add and remove programs. You can just remove shortcuts from other places like LAN properties.

  Run the following fix - it to uninstall client services for Netware.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/program_install_and_uninstall

   

  Method 2: See the following article:

   

  How to make a computer faster: 6 ways to speed up your PC:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=uQRRD6ZPxkC

   

  Important notes:

  ·         Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Dial Up connected but internet works do not... after uninstall antivirus

  I installed avast internet security 5.0.677 and after 7 days, he got no updates. Therefore, I installed UN, but after that my internet is not working.

  I liaison as a dial-up modem to broad band usb. It shows that I am connected but my browser does not work.

  Please let me know the solution.

  Kind regards

  Abdul Hafeez

  Hello

  When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files  When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.

  If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.
  
  netsh int reset press enter

  ipconfig/flushdns press Enter

  Restart your computer. Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic)

  Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic). After a month of looking for the installation Service, I finally found that a group of 10 files and among them was this executable file
  x86_microsoft-windows-p... installerandprintui_31bf3856ad364e35_6.0.6002.18005_none_d83fb8abf30e1638_printui.exe_bb673fff
  If these are the files I'm looking for, what should I do to get them back to where they should do? Any help would be appreciated...

  System Mechanic is your troublemaker & you have lots of company! [1]

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• SetDefault.exe suppose to be in msconfig after uninstall? Otherwise, how get rid of?

  Greetings,

  I need an answer or assistance which has to do with HP LaunchBox/SetDefault.exe in msconfig.

  Recently I had uninstalled just HP LaunchBox, because I had no use for it, and in msconfig, I found that the startup item SetDefault.exe was still there, uncontrolled. SetDefault.exe is supposed to be here even after uninstalling HP LaunchBox? If this isn't the case, please help me try to erase it in msconfig. Here is a picture of what it looks like.

  Thank you.

  

  Hello

  I checked your logs file Autoruns and there is not present.

  What you now hover in the last screenshot - Yes, it seems that.

  Thus, generally speaking - you have uninstalled it, with disabled mode, this entry does not "hurt" your system even if left alone in this way. Microsoft - windows manufacturer recommends not registry cleaning. I recommend you do it only if you know what you're doing.

  I think it's safe to delete all of the "record" SetDefault under Tools shared-> MSConfig-> startupreg.

  Most likely it will erase it. There could be other entries as well - they can be found in the registry.

  I offered you something else in the private message - you can think and let me know.

• How to stop Wampmanager.exe and easyphp to run after uninstall wampserver

  I've been with wampserver (apache, mysql, and php) for a while now. I needed upgrade of wamp and I am well aware that I need to completely uninstall it before installing the new version, I did. Unfortunately for me, until I installed the new version, after that Setup and it has not worked, I uninstalled, redownloaded, tried again. Finally, verified the wamp forum was packed with complaints about the x 64 version was a corrupted file. So I installed the 32 bit version to use temporarily. The next day, the new version has been released. So I installed and decided to check out the forum before going any further.

  No more complaints about the bugs. Finally, I decided that since the new wampserver has so many bugs, I'd rather stay here. I installed EasyPHP. Then I saw wampmanager.exe (0 2 services performed) in my taskbar properties. so I uninstalled easyphp.

  Long story short, I think that somewhere throughout this frustration, I forgot to stop the server (wampserver) before uninstalling. And Yes, I cleaned my registry of all things wamp after each uninstall.

  Now, when I click on the taskbar properties, I see wampmanager.exe and EasyPHP, but neither are installed. (Wampmanager.exe initially says '0 2 running services', but I was able to reinstall, and then stop the service and uninstall.) Now only says: wampmanager.exe). I tried a system restore, reinstall, uninstall. How can I get these 2 to stop smoking? Help please!

  
  

  Original title: help! Wampmanager.exe and easyphp running after uninstall wampserver. How can I stop and remove it completely?

  Hello

  Try the following steps:

  Step 1: check if there are no services of Wampserver and EasyPHP and disable them.

  Follow these steps:
  a. Click Start, and then type services.msc in the start search box and press ENTER.
  b. in the list of services, find all related services.
  c. right-click on the services, then click on stop.
  d. also, right-click on it and click on disable.

  Step 2: check is there is related programs in program files.
  a. Click Start, click computer.
  b. open the C: drive and then click program files.

  Step 3: perform a clean boot to disable it in the list of startup programs.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• HP Deskjet 4615: After uninstalling the software HP4615 I get a "could not start HPStatusBL, the dll module.

  After uninstalling HP4615 and then by installing the HP4645 software, I get the following message when starting "there was a problem starting C:\program HP HP deskjet 4610 series\bin\HPStatusBL.dll. The specific module could not be found. "How can I get rid of this message?

  Thanks for the support. To see that 'Monitor alerts ink' was a job. Without success. It does not appear in the startup routine. The quickest way was to download free software called «For Windows startup Inspector» This program finds the hidden routine so that not even a PI he would get. It took less than a minute to clarify "ink monitor alerts" from the beginning. Play well!

• Install updates error code 646. Vista insists on 9 important updates on MSOffice 2003 after uninstalling IE8 because of accidents etc.

  Vista insists on 9 important updates on MSOffice 2003 after uninstalling IE8 because of accidents etc. Install updates error code 646. I made this 3 months ago. There was a script sent by MS after 3 hours looking for who did some magic registry but I can't.
  Please fix this. I use this machine for business and do not have time or the skills to solve these hardware issues.

  You can ignore this "sticky"-online http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Super slow computer after uninstalling programs...

  I recently had strange problems with my system. They include:

  • Before, when I left my computer for a bit, it goes into sleep mode and displays my screensaver. Now, instead of showing my screensaver, it only shows my wallpaper. Nothing else. No internet browsing software, no icons. My paper just painted. There are a few times when my screensaver appears but only about 1 in 5 times.
  • I put my computer to ask me a password when I wake. But the password dialog box is not displayed when I move the mouse. I have to enter Ctrl + Alt + Del to force the dialog box to appear. I'm positive, I put my computer so that I don't have to use Ctrl + Alt + Delete, but it does not work. And sometimes the command does not work yet. I can stay there and keep only typing for an hour and nothing would happen.
  • Programs to take a long time to start. Microsoft Word used to load in 1 or 2 minutes, but now I have to wait 5-10 minutes.
  • Web pages take a long time to load. It should take only a few seconds at most, but now it takes a few minutes for a page to load. I don't have the best Internet service but I am sure that shouldn't be that slow. 3 weeks, everything worked fine. Last week, all these problems began to occur. I changed my ISP 5 months ago and the Internet was going well so far. I tried to clear my cache, delete my history and cookies, but nothing works.
  • I use Google Chrome as my browser, and when I try to search something in the Omnibox (aka the address bar), it takes forever to load. I have to go to www.google.com and type my search in there. My default search provider is Google, but I don't understand why the site works very well but is not the address bar.
  • On Facebook, I can't comment on, such as updates, see all the comments on a post, or see my notifications. When I click the button I like or click on "View all comments" on a post, it does nothing. I click a few times more, but it does nothing. The same thing happens when I click on my Notifications at the top. Nothing happens. And when I click on the chat on the bottom bar to see who is online. No effect. Is this something to do with Java? I have the latest version of Java, Adobe Flash Player and Adobe Shockwave Flash.

  These problems started occurring just after that I uninstalled a few programs on my computer. They were in a few games and The Weather Channel Desktop App. If anything, uninstall programs should make my computer faster; no more slow. I have AVG antivirus installed and I've scanned my computer already and I have not all infections.
  I use Windows XP and have the latest Service Pack installed (it was 4 SP...?). My computer is somewhat old (I got it in 2005). I have a HDD AMD with maximum capacity of 40 GB. 1.70 GHz Intel Celron processor and about 220 MB of RAM then that I write this. It is quite old compared to new laptops nowadays (they have 400 GB Intel hard drives with 4 GB of RAM).

  I have AVG would eliminate for a while and see how things seem to be of course use their uninstaller from here:

  http://www.Avg.com/us-en/utilities

  You can always reinstall AVG later if yo have to do (I don't would be not so constrained).

  If you are worried about an infection, disconnect the Internet after uninstalling AVG, then see how to open your Word documents and other features with AVG off the image.

  If you are worried about not having protection AV install Microsoft Security Essentials .  MSE completed with MBAM and SAS is pretty good protection and has low overhead.

  If she was not so freakin ' complicated to upload a screenshot here, it would be nice to see the Manager of tasks sorted by the CPU column) descending) when the system malfunctions.

  Maybe someone will post this link on how to do that - I never found and it makes me sick to even read.  I am spoiled to work in the Big Boy forums where things such as viewing the screenshots are just a click away...

  Here's one way:

  To create and send/post/print capture screen or a screenshot:

  Press the Print Scrn button to copy your entire screen to the Windows Clipboard.

  Press Alt Print Scrn to copy the active window to the Windows Clipboard.

  Open MS Paint:

  Start, programs, accessories, paint

  When the painting opens, press CTRL + V to paste the Clipboard, save the new file in paint on your desktop or somewhere that you remember.  JPG files take up less disk space than BMP files and are just as readable.

  Make screen captures as much as you want.  Practice makes perfect.  Make sure that your screenshot does not contain personal information.  Practice the visualization of your images before you send them to make sure they agree.

  Some sites will allow you to attach a file directly on your post, but not the MS Answers forums.  If the site has a sort of piece attachment/upload function it is usually easier just to use it.

  If there is no such function in your forum to download files, then use a third-party free hosting site WWW image.

  Create a free account on some free photo hosting website.  You can always delete your account later if you wish.  Here are some free image hosting sites:

  http://www.imageshack.us/
  http://Photobucket.com/
  With your free account, download your screenshot (s) (JPG or BMP files) on the site and it is up to you to a URL (Direct link) for your new images that you can paste the link directly in the post message, e-mail, etc.

  Send this web address link live here in your answer, and we can click on the address of the link and see your screenshot.  After as many times as you need - the sites are free.

  When you are finished, the link that you post here should look like this my poor system:

  http://img820.imageshack.us/img820/8817/taskmanagerk.PNG

• I can't connect to the internet via my host after uninstalled antivirus software and restart

  I can't connect to the internet via my host after uninstalled antivirus software and restart it.

  I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

  Hello

  This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

  Unable to connect to the Internet after uninstalling Norton AntiVirus.

  http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows?

  322756 (http://support.microsoft.com/kb/322756/ )

• Windows XP does not recognize my DVD players after uninstalling Norton 360

  After uninstalling Norton 360, my Windows XP-based computer does not recognize my CD-ROM/DVD-ROM drives.  Tried to reinstall drivers without success.  Clicking on driver, I get a drive not installed message.  Using the Manager, have uninstalled and reinstalled the drives without success.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• What prevents my last sony ericsson pc suite for the mobile c905 downlaoding computer after uninstalling the olderversion?

  What prevents my computer to download the last sony ericsson pc suite for the mobile c905 after uninstalling the olderversion?

  Check the requirements of the new PC suite

• What is the code for error windows 800736b, get error after uninstalling Firefox

  using windows 6 vista 1525 32 bit sp 2
  to know that I have a 800736b windows error code
  What does that mean?
  Thank you

  Hello

  This error could have happened since you have installed an incompatible version of Mozilla Firefox with Kaspersky Pure. I understand that after uninstalling Mozilla Firefox from the computer you get no error message. You can contact the Support of Mozilla Firefox and check if they have a compatible version of Mozilla Firefox with Kaspersky Pure.

  Please see the link to contact the Support of Mozilla Firefox: http://support.Mozilla.com/en-us/home

  Let us know if you need additional assistance.