Display problems when Satellite A205-S4797 is connected to the AC adapter / CC

Hey friends

I have PC Toshiba laptop A205-S4797, win vista on it

Here's the problem... (Question to display only when the AC adapter connected)

When I connect power adapter the screen shows lines of different colors or turns black with a small box in the meantime or anywhere on the screen with colors in it and the system crashes, I have to stop using the power button and turn on again. It works fine without power adapter.

you guys you will suggest the solution for this?

Just a question:

This happens when your laptop is running and you connect adapter more or when you start a laptop every tie with power running?

Tags: Toshiba

Similar Questions

  • Satellite A205 S4797 - can not find the drivers for my player

    I have recovery disks and the Windows Vista installation disc. When I try to install error meesage says that it cannot find the drivers for my player.
    I tried scannong CD player and there are not 32-bit, 64-bit, all them have different drivers and if so where can I get one I need if not from the installation disc or the disc recovery of fab?

    If you cannot use original Toshiba recovery DVD for the installation of the OS I can imagine there is a problem with the DVD itself (some missing file or scratches) but the installation of Microsoft Vista SHOULD work on this model of laptop.

    If this doesn t work too there must be a problem with the HARD drive. Just if you want to install Windows XP Home edition, you need to load the SATA driver on startup, but Vista should work.

    Can you please tell me what happen when you try to install Vista from the facilities of Microsoft Vista DVD?

  • Satellite L500-1UU - disconnect the battery when it is connected to the AC adapter / CC

    Hello world

    I have purshaced new Toshiba Satellite L500-1UU
    CPU: Intel (r) Core i3 CPU M330 2.13 GHz
    Physical memory: 4096MB RAM
    Microsoft Windows 7 Home Premium 6.1.7600

    My question is: remove the battery when I use my computer laptop while its connected to the AC adapter would be wise or not? This would increase or decrease the life of the battery, or it will not affect anything?

    Is i3 processors have a technique of centrino disconnect battery power whent, it is fully charged?

    What do you think of this?

    Hi Khaild Essam,

    I agree with Akuma. There is no problem, remove the battery when the AC/DC adapter is connected. If you can do it. In addition the battery charge will be stopped if it s at full charge. The laptop consumes energy to AC/DC adapter only.

    If you remove the battery and work with AC/DC adapter only, the battery life will be improved a little because it s not in its use.

    I found an interesting document for you:
    [How to get the most out of the battery | http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm]

  • Use of the external graphics card with Satellite A205-s4797

    Also, can I use this external graphics card, it's "Asus XG Station", with my laptop, Satellite A205-s4797?

    Why not???

    If it s possible to plug this card into the laptop, then I see no serious reasons why you shouldn't t be able to use it.

    But as much as I know as the external card can only be used with the external display (monitor) because the portable computers internal display is already taken by internal graphics card.

  • My Satellite goes into battery mode despite being connected to the power adapter

    Y at - there anyone out there who can help me, please!

    I bought a Satellite a couple of years ago which worked well for a while - however, it has started to overheat a lot and kept stop without reason. After many searches on the net, I discovered that the fans were very likely blocked with dust? After you clean the laptop worked like a dream and as a Bunny happy I was!

    However, now a new problem has been its ugly reappearance - for some weird reason the laptop suddenly, without warning, past in dominant mode of battery despite being connected to the power adapter? He refuses to "acknowledge" that the adapter is plugged drains the battery quickly and then stops?

    I tried once more looking for an answer and it seems that I am not alone in suffering from this problem? I read that it is perhaps a bad connection between the adapter and the motherboard, but it would be expensive to fix? Others have said to try a new adapter, but I tried from another laptop and it still happens? I hesitate to implement local repair because sometimes, this problem may occur after half an hour and other times, that won't happen for hours and hours and it is difficult to explain the problem?

    There seems to be no rhyme or reason, but to crazy me on a regular basis!

    HI Deb,

    It is a common problem and can have several causes. The most common are a common defective soldering on the motherboard (where the socket is attached) and it can also be caused by a bad connection between the AC plug (at the end of the cable) and the socket on the laptop.

    Unfortunately, the standard response from most repairers is just to replace the motherboard, probably because it's faster for them and produced more revenue that comes to fix the connection.

    I solved this problem on my SA30 by pinching the cable ca to the back of my laptop in order to prevent any movement or tension on the connector. Unfortunately this will not help if the socket is already damaged, but it can reduce the incidence of the problem to occur.

    Kind regards

  • Satellite L650 - unable to connect to the public network (has no valid IP address)

    Hello

    Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

    I have visited many forums and did everything, but of no use.

    1. people with disabilities the tcp/ip V6 of the registry.
    2. the DHCP is enabled. With the help of the automatic IP (DHCP)
    3. also tried with a static IP configuration.
    4. uninstalled the antivirus provided with laptop computer (Norton).
    5 disabled the windows firewall.
    6. restored to factory settings.

    I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

    Can someone please give some other suggestions for this problem?

    Hey,.

    Can you connect to your home WIFI router correctly?

    If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

    What you can try is updated WLAN driver from Toshiba's official website:
    http://APS2.toshiba-tro.de/WLAN/

    If it doesn't work, ask the person contact I mentioned.

  • I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

    I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

    original title: Internet connectivity problem

    Hello

    Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

    Support link: http://www.pandasecurity.com/homeusers/support/

  • Unable to restart or shut down Windows when a USB modem is connected to the computer

    When I plug a USB modem, either 3 G or dial-up, my computer will restart or shut down. It complements the normal stop the procedure, but instead of actually put back in power, the screen becomes black and stay like that. After a manual stop, Windows reports that he is recovered from a serious error. I have had this problem since I first installed Windows Vista about half a year ago. When there are no modems connected to the computer, it restarts and stops normally. In addition, printers and USB flash drives appear not to cause to happen.

    No idea how I could solve this problem? Thank you.

    Works fine now. Another bug of Microsoft.

  • Satellite M100 does not illuminate unless the AC adapter is pluged

    I am also having the same problem with my Satellite M100. The computer does not illuminate unless the AC adapter is pluged and plugged into the power outlet.

    Any ideas on how to solve this problem? The battery should be fine.

    B.

    Hello

    Well, to me it sounds like a battery problem
    Why you say that the battery must be good?
    Have you checked it or because the technician?

    In most cases if the battery is faulty then the laptop would have no power until it would be connected to the power adapter.

    So I think (but that's just my personal opinion) the battery must be enabled (by technician, ASP) and if necessary should be replaced.

    See you soon

  • "Cable not connected to the network adapter.

    WRT400N did not come after start stop and cold pc.  Windows Vista repair & diagnostic returns "cable not connected to the network adapter.  I tried to plug and re - plug cable ethernet; router power off (+ 10 sec.); Linksys repair; reset the modem, etc.  The success of the Internet, but no router.  The only solution is a pc "restart" and then the appropriate router port lights up and all is well.  What is the real solution please?

    Hi Helm,

    I finally got the router to work after several reboots and struggles.  in any case, I'm always game to try almost anything if you have any other suggestions...

    Thank you

  • Display problem on Satellite A300 after Win7 upgrade

    Hello everyone,

    I just did an upgrade to my Satellite A300 for Windows 7 32. I booted up my laptop and everything was fine, but after I have write my username and password and open a session on my screen becomes black.
    I hear it works, but I can't see anything.

    When I used safe mode it worked fine. I checked the display of information and it says unknown
    I downloaded the latest drivers for the ATI card on the Toshiba site, but when I install it, it says driver not detected because I think that I'm in safe mode and it is not connected and I can't install it in normal mode because I don't see anything

    What should I do?

    Help, please

    Hello

    It is not easy to say what the problem is here. I have too many Satellite A300 and since last week, I use Win7 too.
    On my laptop, everything works perfectly.
    I also found the small group of Toshiba on Facebook and a guy he describes how to install Win7 on Satellite A300. If you are on Facebook you can check it out HERE.

    I recommend you to install Win7 after facilities command posted here.
    If you have any other questions please let us know.

  • Some problems with Satellite A205

    I bought a Satellite A205 at the end of March.
    It has been in the shop more than six weeks time I've owned it.

    The motherboard has been replaced twice, the LCD once and once the touchpad.
    Repairman told me that over $2000.00 were spent fixing the computer $900.00.

    Can someone tell me what is Toshiba lemon policy and when it was decided to not put more money into a warranty repair?

    Hello

    It's really sad story and I can really understand that you're frustrated.

    It seems like you're one of those who had some bad luck with the laptop. :(
    But I have a Sat A200 (it's similar to A205) and everything works fine. No problem until now... I'm lucky :D
    Anyway... the guarantee is valid and everything should be done for free... So relax and don't worry ;)

    To my knowledge, books are covered by the standard warranty for 12 months and if you sign up on the page of Toshiba notebook you will get an additional one year warranty. Of course, you can also buy warranty extensions but please do not ask me for more details... I think that everything can be found on the page of Toshiba...

    Welcome them

  • Satellite A200 - STARTING problems, freezes on the connection of the power adapter

    My 3 YO A200 (PSAF3A-08202D has developed a problem with starting.
    I can start on battery power with WINDOWS VISTA BUSINESS (after 10 attempts, but freezes immediately when the power adapter is plugged in.)
    Display sometimes boots wide-screen, but mostly freezes before windows welcome.

    When running, the battery produces about 1 to 2 hours before a complete evacuation.
    When executing a battery, computer freezes when I plug Charger AC/DC immediately and going with my A100 charger as an alternative.

    Initial problem was a faulty hard drive and super hot air flow due to fluff the cooling block fan.
    Tech replaced original 120G HDD with 500 G and reloaded at the factory. works well for 3 months, then started with the same problems so conclude original disk HARD was just a secondary issue.

    So maybe fixed I overheated components on the motherboard. Reset of data cards initially fixed a problem starting but is gradually degraded.

    Reading through the forums seems that there is a huge amount of these laptops with similar issues. Is this a design flaw, like my other Satellite A100 is solid as a rock. All forums, which suggests resetting the cpu is running slow or be disconnected seem to be temporary repairs. Boot in safe mode and reset the default settings have no effect.

    A suggestion that a capacitor is at fault seems to be the fix is valid but which involves specialized tools is not available locally. Local agent of Harvey Norman for Toshiba are best part of unnecessary because they can send in Australia from Toshiba. Machine has been close to $2000 and is now worth Zip.

    I am unable to do anything with this machine, as all the ways of upgrading or resetting calls for AC power available and running.

    I'm about to do radical things and hope that this forum can enlighten us.

    Hi Mickaël

    You might be right. It seems that the motherboard is affected.
    Don't know why but higher temperature can still affect the internal parts.
    The temperature may increase if cooling fans n t working correctly. For example dust or debris leads to a higher temperature because cooling air cannot circulate properly.

    I have to clean my laptop's cooling grilles from time to time using a jet of compressed air. This allows to keep the temperature at the lower level.
    Of course the internal temperature is not always a reason for portable computers hardware malfunction equipment can begin to malfunction as always in an other products too: TVs, cars, game consoles

    I bought an extended warranty for my laptop, also for my LCD TV mercy always if a high-end product begin to malfunction and in the case of a warranty claim, the fault can be fixed free of charge.

  • display problem when start my Mac with Sierra

    When my MacBook Pro 13 with the retina display changes to another other than 1280 x 720 resolution, when I boot my Mac, there will be a white strip above the logo apple with flash on the screen... Is there a solution?

    Hello fish6,

    After reviewing your post, it sounds like you have problems with the resolution of the screen changes and the screen flashes.
    I would recommend you read this article, reset the NVRAM can help with the screen problems you encounter.

    How to reset the NVRAM on your Mac - Apple Support

    Thank you for using communities of Apple Support. Good day.

  • Satellite U500: Volume + button glue IT when it is connected to the power adapter

    I have a problem with the touch buttons on my U500. I have already returned the first laptop that I bought for the Exchange.

    The question is this:
    When the power cord is connected (without worrying if connected to the wall) the "Volume +" button will stick THERE.
    The volume will continue to rise, it cannot be muted or turned down as the + keeps repeating.
    Without the power cable inserted the works of buttons as expected (normally).

    I made the new installation of recovery discs - do not set (under Vista)
    Then another new installation Win7 upgrade and this new PC is having the same problem.
    At first, I thought a hardware fault (the new PC worked fine for awhile).
    But now the second PC has the same symptoms I suspect a software/driver problem.

    I've seen suggestions for similar questions to:
    Re-install "Toshiba common Modules" but I can't find it on the support site for U500 in Australia.

    Any help would be greatly appreciated. Thanks to you all.

    What version of BIOS is installed?

    Try to update the BIOS.

Maybe you are looking for

  • iTunes digital copy of the film

    I bought Star Wars: The Force Awakens on Blu Ray in April and it came with an iTunes and/or the Google game code to redeem the film. I bought it on iTunes, but I wonder. It is essentially a way to get the legit iTunes version for free, or is it a dif

  • All embedded videos in articles of the internet and YouTube play sound but no picture

    My problem started about 2 weeks ago. Before that, I could directly play any video on Youtube or any video embedded in a Web download.Now video games, in the sense that I have sound and the time elapsed bar moves along the bottom of the screen, but t

  • "TCP server inactive" error in LabView 7.0

    My TCP in LabView 7.0 feature has disappeared. In the lower right corner of LabView on splash, he says "TCP server inactive". How can I fix it? Thank you

  • Windows XP KB976098 update

    I have the icon on the taskbar to install update. Click to update but fails to install. The update is for changes. (KB976098).How to install or remove?

  • Computer won't start after that update was interrupted

    Ive got this HP laptop for 1 or 2 years now and I have been updated and without doing so on the slots, I closed the laptop and now when I try to start it I'm stuck on the loading screen and when I do the startup repair it stays on a blank blue screen