cleaning disc in windows 10

Similar Questions

• What is the best? Cleaning disc of Windows or CCleaner

  I would like to clean my operating system on a regular basis, to remove entirely "removed" files, which is in the bin, Internet research, etc. I've used Windows' disc and CCleaner, and CCleaner cleaning always seems to take much more time, to follow a process on Windows Disk Cleanup that can take 5 minutes, more than an hour about CCleaner! Is this because CCleaner is much deeper? It seems to be something called "passes", which I don't see on disk cleanup.

  I understand it is a Microsoft Web site, and therefore the loyalty may require says nothing bad about Windows compared to CCleaner disk cleanup, but I would like a straight answer.

  Thank you

  Disk Cleanup will do what you need.

  In all cases could simply empty the trash

• Where to find cleaning disc with Windows 7 Home Premium

  Mine is Windows 7 Home Premium, my computer is slow and I don't have good disc cleanup with system tool, can someone help me? Thank you.

  Click the Start button and type in the zone Explorer, disk cleanup, at that time here you can press the Enter key or click the suggestion above.

  After evaluating your drive it will offer to clean the system, if you click on the link of cleaning system list.

• "windows host process RUNDLL 32 has stopped working" I ran the cleaning disc etc. without success. Help, please!

  Internet explore and Incredimail has stopped working after power failure with the following error message "windows WHAT RUNDLL 32 host process has stopped working. I ran the cleaning disc etc. without success. Help, please!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I decided to do a clean install of windows 7, but when the disc it stops to extend windows files 0% I do not know why this happens is the drive.

  Original title: Windows 64-bit clean

  Ive recently done my 2nd attempt to install windows 7 64 bit and ive met the same problem, I have formatted and deleted all the data ln my drive hard amd decided to do a clean install of windows, but when the disc it stops expanding windows files 0% I don't know why this is happening is the disc

  You have all the features non-essential connected to the computer during installation? If you have external storage media connected, disconnect them.

  It is also possible to reinstall your Windows 7 media is corrupt. You can try to download a new copy and try again.

  How to: What are my options for Windows 7 reinstall media?

• Do I have to do a clean install of Windows 7 upgrade disc?

  Hello

  I use a retail version upgrade of Windows 7 Professional 64 bit on a desktop PC, I've implemented myself 4 years ago.  I have upgraded to Windows XP then.

  I think I would buy a new card mother and CPU in another year and I hope that my current installation of Windows 7 on my hard drive (fairly recent) current will be able to start with the new MB and CPU - and just to require new drivers for chipset.  However, I know that this will not work and I might have to reformat the drive and do a clean install of Windows 7.  I'll be able to do it from my Windows 7 upgrade installation disc?

  Unfortunately, I got rid of my old XP drive because I'm moving soon and I threw it without thinking.  Do I need to reinstall Windows 7?  I still have my old XP serial number and product key, and of course, my Windows 7 product key and serial number.  Also, I have an old system repair disc and could make another if this will help.  Thanks for your advice.

  Zaid

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  Try the following:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Clean install of it or can I just get a disc normal windows 7 and have even ultimate?

  I have windows 7 ultimate and I was wondering if the need to have a windows 7 install ultimate disc to repair or do a cleanup of it or can I just get a disc normal windows 7 and have even ultimate?

  As long as the installation disc is the ultimate, he will work to install.

  As long as you have an activation key that will activate it or at least ;) should

• Cannot find the Defragmenter & the disc clean up in windows 7 (using search)

  Don't know what happened, but I was in a chat session w/agent, face w hp / another question, it was not able to fix it, he offered to solve the problem that I create another user account and remove the current user account and that should solve the problem.  He doesn't, however, but now I can't find the disk or Defragmenter cleaning that I used on a daily basis when I try to use the search engine (Start button)? they not appear?

  Don't know what happened, but I was in a chat session w/agent, face w hp / another question, it was not able to fix it, he offered to solve the problem that I create another user account and remove the current user account and that should solve the problem.  He doesn't, however, but now I can't find the disk or Defragmenter cleaning that I used on a daily basis when I try to use the search engine (Start button)? they not appear?

  Start, the cursor to "all programs", click on accessories, System Tools. You see them on the list? If you do, right-click on them and select either, to pin to the taskbar of the tasks, start menu or desktop.

  Hi & thanks for the reply; I did as you said, but none were in the Accessories/System Tools folder.

  OK, try this, click on start, computer, click once on the C:\ Drive, then right click and select "Properties". Click on the tab "Tools". Do you not see there the defragmentation tool.

  Also, you can run the SFC.exe (System File Checker) tool to fix a corrupted user profile.

  How to run the SFC.

  http://support.Microsoft.com/kb/929833

  great! I found the Defragmenter and it have pinned to my taskbar! thnx, now if I can find the cleaning disc I would appreciate :-) thnx for your help so far ;-)

  Have you tried the SFC tool? Try to click on start and type, "cleanmgr" does popup?

  How to run the SFC.

  http://support.Microsoft.com/kb/929833

• Cleaning disc (cleanmgr.exe) bilge blocks stuck on cleaning windows update

  Disk Cleanup (cleanmgr.exe) does not finish clean files from windows update...

  After applying the fix to solve problems, the computer will restart to say "Configuring Windows Updates", but he will remain on the screen until a manual stop.

  Please tell us what methods I can try.  I also ran sfc/scannow in an administrator-level command prompt and it returned no errors or corruption.

  This is what happens - after you handle some MS u / g-d, but then run Disk Cleaner with the Microsoft Cleaner checked update, history is erased, which corrupts the sludge and it loses you.

  http://support.Microsoft.com/kb/971058/en-us worked for me

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• I'll be able to perform a clean install of Windows 7 (Vista Upgrade Option)?

  I was wondering if I would be able to perform a clean installation of Windows 7 with "upgrade drive" we are is sent when Windows 7 is released October 22, 2009. I had read that we will be able to upgrade the sense we will keep all our old stuff, however I just want to perform a clean install without all the garbage that comes preloaded on the computer when you buy it.

  Yes, you will be able to clean install with upgrade disc. Generally, everything you had will go into a folder named windows.old, if you have backed up everything you can delete this folder but if not only get what you need, then delete. This issue will take place. The folder contains all the files you had, the programs, but you can not open them or he'll tell program not found and the files of vista or xp. I hope this helps. Just at the moment where you see the menu level or custom installation, click Custom install and who should be the ability to clean the facility.                  OS: Windows 7 Professional. PC: HP DV4t.

• Clean install of Windows 7 on Satellite L655

  I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.

  I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  > I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.

  What exactly do you want: clean windows installation or by using the disk Toshiba recover?

  I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
  This installation requires a valid serial key.

  But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.

• Clean install of Windows 7 Ultimate 64 - bit on Qosmio X 870

  When I got my laptop (Qosmio x 870) I immediately uninstalled BONES because it was full of bloatware and installed a clean version of windows 7 ultimate 64-bit. After my installation I tried installing the drivers on my laptop, but some do not seem to work.

  My VGA driver installed, but the windows experience index for my graphics is 5.5 which is much lower than it should be (if memory serves right it was 7.4 before I uninstalled the original O.S inflated). However, the biggest problem I encountered is the network driver. I installed all network drivers unique on the page of the Toshiba driver for the qosmio x 870, but none seems not to work. For some reason, the laptop thinks my wifi is disabled, I know that it is not (unless there is a setting in the bios that needs to be changed if not I don't know).

  I really need some help here guys, if someone can me EXACT by the drivers I need this point would mean the world to me. Toshiba really should have a package of essential drivers, as most other computer companies have, it makes everything much easier for people who hate the bloated OS that comes with their laptop.

  > When I got my laptop (Qosmio x 870) I uninstalled immediately his BONES because it was full of > bloatware and installed a clean version of windows 7 ultimate 64-bit.
  In my opinion this is the biggest mistake that anyone can do after the purchase of brand new computer. But you're not alone.
  As a first step before doing this you create recovery discs, and I really hope that you ve done that.
  Second, I can understand you if you say that the recovery image contains many pre-installed tips that you don t like, but you should not install version of the OS. No one force you to use all this stuff. You can remove all the system software and configure OS preinstalled on the way you like it.

  And third, why you didn t post here and picked up some opinions until you started to install own OS? You might get some useful tips first.
  You can install the version of the own BONE but installation of additional things must / should be made after the right installation order. Computers laptops Qosmio have more complicated platform/hardware features and drivers, tools and utilities must be installed on the right track if you want to have all the features.

  Best thing you can do now is to reinstall the OS and continue to install all the extra stuff following the installation order posted by Lasko.

• Clean install of Windows 8

  I want HP DV6t. There are some informal activities past in my laptop. So I just want to do a clean install of Windows 8. I don't want to delete my other files on the disc. I just want to reinstall windows 8. I have the recovery disk. What are the steps to follow... ? Someone help

  A clean install of Windows 8 will be erase your other files by definition as recovery disks. Fortunately, Windows 8 has a few new options of Maintenance not seen in earlier versions. You can try a BONE 'refresh' that will install the new system of Windows 8 files without disturbing your data or settings.

  http://www.PCMag.com/Article2/0, 2817,2410848,00.asp

  You want to back up your important files before there is a small chance that it can go wrong.