Cleaning safely Touchsmart screen

Similar Questions

• How to clean my laptop screen?

  Hi all
  is someone can you please tell me what is the best way to clean my laptop screen or just a way to do it? I noticed that there are tasks and it annoys me a lot, but since the laptop screens are very delicate, I would appreciate a professional help from this forum...

  Maybe stupid comment, but I have cleaned with small liquid rags for spectacles. :)

• my envy touchsmart screen is sideways

  My Envy Touchsmart screen is on the side... When I re-start, it always is sideway. When I went on the forum was not seen anyone who had the question displayed.

  Hello

  Try to press and hold the Ctrl and alt keys, then press the arrow upward.

  Kind regards

  DP - K

• ENVY 17 t-j100 update Select Edition CTO of Touchsmart screen?

  Is it possible to upgrade the ENVY 17 t-j100 Select Edition CTO to a Touchsmart screen and if so, any idea what it would cost?

  Hi @Xoxcatpl ,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are unfamiliar with the operation of the function of the Forum, private messages you can learn it all here.

  Kind regards
  George

• Cleaning the touch screen?

  What is the best way to clean my touch screen of fingerprints and stains?

  It is a CNET article on best practices for the cleaning of the screens that I love.

  The big thing is do not spray liquids directly on the screen.  Use a soft Lint and wipe the screen gently.  If you have spots, use soapy water and soak your clothes in water, wring out and wipe the screen, make sure to remove any SOAP residue.   Then go to the screen with a cloth dry to remove scratches.

  I hope this helps.

  TB

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Pavilion Touchsmart 23: Pavilion 23 Touchsmart screen dim after sleep Windows 10

  Pavilion Touchsmart 23 all-in-One model f339

  AMD Radeon HD D 8670

  My screen is too dark, after that the computer "wakes up" fashion "sleep" I can read only now my face one inch away. Reboot brings the brightness back to normal, only to happen again the next time that the computer sleeps. This has only started happening since the upgrade of Windows 8 to 10 of Windows.

  -All drivers are up-to-date

  -All Windows updates are up-to-date

  -There is no brightness slider in power options

  -I have no brightness control on my keyboard

  Please help me solve this problem, so I don't have to go back to Windows 8! Thank you in advance.

  I think I might have made some progress with this problem. I had a friend call me and he suffered from these same questions. The partial solution (and probably most) I've discovered is that there is a critical update of the BIOS that had not been done. Because Windows 10 was already installed, it didn't appear on the page to Support HP or HP update software. The way I had the time it was to say the HP website that I had Windows 8.1. The update then appeared. I downloaded the BIOS for its model was last updated and installed. (BTW: it worked great in Windows 10). Once I've upgraded, the dark screen problem has been resolved. However, as long as the screen saver, night light or auto Hibernate still does not work. You can manually put the computer to sleep via a button or the start menu, and he returned very well. His was an AMD based all-in-one and I don't remember not if someone had problems with the Intel based platforms.

  So, to summarize... If you have not installed 10 still make sure you BIOS update first. If you have goto, the Web site and enter your model. Replace the Windows 8.1 operating system. Download and install.

  If anyone has more of an insight, please answer others to take advantage. Good luck and enjoy Windows 10. And if anyone has a solution for the problem of sleep/sleep/screensaver please respond.

• Envy Touchsmart 15-p178ca: 15-p178ca Envy Touchsmart screen resolution

  The specifications of my Touchsmart Envy 15 - p178ca States, it has a 1920 x 1080 resolution and the recommended Windows 8.1 video resolution is 1920 x 1080, but STEAM system information indicates the following;

  Driver date: March 30, 2014
  OpenGL Version: 1.1
  Desktop color depth: 32 bits per pixel
  Monitor refresh rate: 60 Hz
  DirectX card: NVIDIA GeForce GTX 850M
  VendorID: 0x10de
  Device ID: 0 x 1391
  Number of monitors: 1
  Number of logical video cards: 1
  No SLI or Crossfire detected
  The main screen resolution: 1536 x 864
  The desktop resolution: 1536 x 864
  Main display size: 13,54 "x 7.60" ("diag 15,51)

  Why it shows the screen as 1536 x 864 and not 1920 x 1080?

  Hello

  Please, use the following to see what it is:

  http://www.whatismyscreenresolution.com/

  I can't find his record. Where is he?

  Kind regards.

• How should I clean my laptop screen?

  I had my hp Pavilion dv6000 for almost four years and the screen got a little dirty at the moment.  I would like to know what type of display by srcreen laptop is exactly and the best way to clean it, and what to use.

  Hello

  This document should guide you on the best method of cleaning:

  http://support.HP.com/us-en/document/c00292159

• cannot show the desktop on the envy Touchsmart screen

  I can't show the desktop on the screen of my laptop Envy 17 quad touchsmart with Windows 8 t, although other images, such as screen saver can be seen.

  Hello @CJ867 ,

  Welcome to the HP Forums!

  I see that you are having problems with the screen does not display is not on your ENVY 17 laptop. I will do my best to help you with this.

  Can you tell me if the office applications appears or if only the splash screen and apps work? Or is it only the background is black, but you can see the icons and the system tray?

  If it is a new issue, there were recently some updates Windows that were originally black screens after login and it could be related. I suggest you perform a restore system before the issue started. You can see how to do this here: (Windows 8) system restore.

  The system restore is usually confused with a system refresh or reset. Recovery allows to uninstall updates, drivers or software that was installed after the restore point, but will not delete your personal files.

  Let's start with that. Let me know if it helps!

• Turned on its side during the cleaning of the screen and do not know how to restore properly.

  cleaning keyboard and press something and he hit my screen do not know how to restore

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right click on the empty desk > graphics > Rotation.

  See you soon.

  Mick Murphy - Microsoft partner

• Hi HP Touchsmart screen empty even not the up cursor shows, please help

  I have a HP touch smart pc, when I got to turn on tonight looks like it's going to load, but just gray screen, nothing shows at all, the cursor is not visible. I tried pressing F8 to try to start in safe mode, but nothing showed up, I then tried to load the backup disc, I could hear the disc running but nothing appears on the screen.

  I would be grateful for any ideas,

  Thank you

  Hello

  I thought that I'll let you know the results of the trip to the shop for the TouchSmart.

  I didn't get no help from HP at all when I sent them an email detailing the problem, had to take the machine in the store to check out them, the opening to the top of the machine, it was found that the video card is attached to the motherboard, so to buy both, and because it is a specific element would be only able to be purchased at Hp is. Consulted on the Hp web site at a price that my machine has now been abandoned, so no parts available!

  I only got 2 years Pc, on the audit of the hp forum, it seems that it is a common problem for this touchmart this is perhaps the reason why they stopped them, no help to someone else with this problem that I don't know, but maybe I do the job for anyone else having the same problem.

• Qosmio F20-155: how to clean the LCD screen?

  How can I clean the LCD qosmio f20-155

  Hello

  Check this post on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14642

• TouchSmart screen problem

  My 2 year 1/2 old Touchsmart 300 has developed a thin vertical lines and cut color - a bit like a thermal image - not as clear that the color was.  Someone said that maybe it's a problem of graphics cards and because there is no separate Tower, maybe it's not repairable.  I would appreciate any help with this problem because it has been a great computer otherwise.

  Jstaff19, welcome to the forum.

  Which of these models is yours?

  Have you tried to update the video driver?  This can sometimes solve problems that you encounter.

• Pictures and writing are not clean on my screen.

  BUBBLES FROM THE SCREEN

  
  
  BUBBLES OF PLEA SE HOW CAN YOU HELP ME TO FIX MY LABTOP SCREEN? THE PICTURES AND WRITINGS ARE NOT CLEAR.

  Suggestions for asking for help on a site.

  http://support.Microsoft.com/kb/555375

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395