Clear Bios password

I have a Compaq CQ62 which has a power on password I forgot

the key code is #69558137

Can someone help me please?

Hello

Please be aware that this is not supported by HP and try your hand at your own risk.

Try to enter: 76430119

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • Pavilion a1253w clear BIOS password

    Need to clear the BIOS password when I have F1 in the CMOs settings.  Web site map mother HP is Amberine-GL6E.  I think I've seen the notation on the motherboard for riders to change, but I see no rider.

    Your photo of the motherboard is here. The jumper is labeled CLRTC and is in the bottom right (looking in case):

    http://support.HP.com/us-en/document/c00496280

  • Compaq presario CQ62: clear bios password

    Hello my key after 3 failed password is 68719117.

    Please help, thanks!

    Cindy

    Try 77671139

    If it works, go to the BIOS and clear/disable password. Use the code as the old password and let the new white.

  • Portege 7220: Clearing BIOS password

    Hello
    I just installed WinXP on my Portege 7220. I installed the utility download, but find that I can not open the HW installation application.
    I need to disable the BIOS password that had created a previous user.
    Advice please.
    See you soon,.
    NEIL

    Hello

    Unfortunately, only the service partner can remove the Bios password. :(

    Good bye

  • Problem of password of the Qosmio X 300 after clearing bios password (Phoenix Bios)

    A few weeks ago I put a supervisor password and the password for the HARD drive in the bios. Today, I deleted the supervisor and the HARD drive password and has nothing written in the fields. The BIOS Setup has confirmed with "deleted".
    After a restart, the laptop has always requires a password and dismiss all. I have the despair, the password that is needed? All erased!
    All solutions?

    Post edited by: Ralk_1

    Try to set supervisor supervisor password utility password again. After reboot, use this tool to delete it again.
    He has to work.

  • EliteBook 8440p: Reset TPM or Clear BIOS password administration

    Hello everyone.
    I have the HP Elitebook 8440p with password on the bios.
    I will be tried all methods to reset the TPM module, but all my attempts have failed.
    If you know how claire TPM on my laptop please tell me.
    Best regards, Ivan

    It dose't work

  • clear bios password cq62

    my code is 58399423

    Hello

    Enter: 47091405

    Kind regards

    DP - K

  • Default BIOS password

    Hello everyone,

    I had real trouble moving my Touchsmart 600 - 1030fr to Windows 8. Due to incompatibility of graphics driver, I see nothing on my computer after the startup screen (the one with the blue window).

    I discovered that a change in the BIOS can solve this problem, but my BIOS asks me a password. I tried to reset this password in removal and replacement of the battery from the motherboard. Although he told me that the BIOS has been reversed to the factory settings, the password is always there.

    Is anyone of you know what is the password to the factory settings?

    Also, I read on the forum but

    • The password 12345 found heredoes not work
    • the text which States

    "NOTE: If a new non - HP BIOS is installed, and turn on a password is used, and you don't remember the password to start the computer, see the support document of specification motherboard for your computer model to find the password reset instructions to clear BIOS passwords."
    not help me in my documentation of the computer do me not any suspicion on the specification of the motherboard and it is a real BIOS HP.

    Thanks for your help.

    Here are the specifications of your desktop HP TouchSmart 600-1030fr and it's card mother Pegatron IPP7A-M5 (E60). Please follow these instructions;

    The BIOS password is used to protect the settings of the BIOS against unwanted changes. If you have forgotten your password, you can use this jumper to reset password settings.

    To clear the password BIOS follow these steps:

    1 turn off the POWER the computer and unplug the power cord.

    2. Locate the jumper marked CLEARLY P.W.

    3. move the jumper on the PSWD jumper on pins 3-1.

    4 wait about 10 seconds, and then return the jumper to pins 5-3.

    5. connect the power cord and turn on the computer.

    6 hold down the F10 key during the boot process to enter the BIOS setup. You will not be asked a password.

    Diagrams are on the page "card motherboard" for your computer.

  • How can I reset the Setup/BIOS password?

    Yesterday, I bought a used HP Pavilion a1640n Media Center Edition for my granddaughter. I wanted to go through the installation and make sure that everything has been updated and looked good but when I went into the Setup program it asked me password.  The kid, I bought could not remember ever put a.  It has been upgraded to Windows 7 - it works beautifully I might add - and somewhere along the way someone put a password during the installation.

    How can I go on the erasure of the values as the BIOS password?

    Thanks in advance,

    Howard Woodard

    Redmond, WA

    Hello

    To clear the Infromation in BIOS follow the steps below

    1. Turn off the computer and unplug the power cord.
    2. Locate the jumper marked CLEAR_PWD. (Normal) position, the rider is default on pins 2 and 3.

    1. Move the jumper on the CLEAR_PWD jumper to pins 1-2 to erase the password.

    1. Plug the power cord and turn on the computer.
    2. Hold down the F1 key during the boot process and enter the BIOS to change or clear the password.
    3. After changing or clear BIOS passwords, consider the jumper to reset the pins 2 and 3.

  • Clear the password BIOS on Satellite Pro A300

    Hey guys,.

    I'm selling my laptop and to reset my bios password, and I don't know how. To clear the password is greyed out in the BIOS.

    Have updated to 1.8 and not go.

    See you soon.

    If you know the password?

    Try to delete it in Windows (in the Toshiba Assist Utility)

  • Folio 1040 G1: How to clear the bios password

    I got a laptop HP 1040 Folio G1. A few years ago, I would set the password of the bios on this subject.

    (I have still remember and use PW daily)

    But now, I didn't need to protect more bios password.

    I tried to delete it, but I found that - to just change it.

    NORMANLY, when to clear the bios password (eg on the desktop) the PC checks current PW (I have exceeded the stadium).

    In the box to request new password, put the ESC button. And then, the IPL has been removed.

    But on the Folio 1040 G1, it did not work.

    Pleas tell I can remove it or not (and how). Thanks to you all!

    Thank you Zincas, for your support. The last way you proposed (press the space button once) does not work.

    Instead, I find a simple way to solve.

    I have reset default of the manufacturer of the bios (early). BIOS now check the password has not appeared more!

    Thank you once again!

  • Compaq CQ57: password clear bios (Compaq CQ-57)

    Hi I can not access my laptop because of a bios administrator password has locked me, I need help to clear the bios password...   It says code system off: 72782783 has soon ezpzpc

    @ezpzpc

    Enter 63680305

    Kind regards

    DP - K

  • clear a bios password

    Hello

    I bought my laptop in the last days of my marriage. During this time, I feared for my private life, so I put a password on all levels of my laptop, including startup and the other for the BIOS. It was years since I need the BIOS password and I forgot since. Is there anyway that HP can help to clear the password without having to open the laptop?

    Try this 65441199

  • Tecra M2 - how to clear the BIOS password?

    Hello

    I bought a Tecra M2 off ebay. When I boot it asks for a password immediately. I don't know the password. Y does it have that is an easy to clarify this?

    Thank you very much
    Martin

    Contact the previous user and ask the BIOS. If he tells you that BIOS is not for him, but he was not in the description of the product to return this laptop and write negative comments.
    The same thing happened to me 3 months ago. He send me the BIOS password and had full access to the BIOS settings.

    BIOS password can be deleted by authorized personnel only.

  • How to clear the password for Bios on Qosmio G20

    Hi all,

    I have a problem with my Qosmio G20.
    A year ago, I put my bios password. But now I forget it.
    Could you help me how to delete my old password? Where can I find my CMOS battery?

    Thanks in advance!

    Hey Reaver-> nice page
    But I think in this case the forgotten BIOS password can be removed by the ASP (service provider)

Maybe you are looking for

  • iOS 10 is now out.

    A word of warning, if you absolutely must have first, then have him home, but before you download the update, BACKUP YOUR DEVICES! Do not forget that the servers will be overloaded have so little patience. You might be better off waiting for awhile,

  • roboformtaskbaricon process does not close after that firefox 9 is closed

    Hello roboformtaskbaricon.exe (v754) process does not close after that firefox 901 is closed. Even if I'm wrong, my guess is that firefox pushes this process of firefox, forcing him to run on its own. If it's a matter of roboform, then I will contact

  • Video camera is not working on Skype

    The laptop of my wife who uses vista, does not funtion video camera integrated when using Skype. We also bought a new USB camera, but it does not on Skype. Both devices work when you use the program to the USB camera. We have run the diagnostic progr

  • Satellite A100 - Sk4 Bluetooth or not?

    Bought an A100-SK4 a month ago and no one can say with certainty it is has Bluetooth or not. Try to enable it from the Bluetooth Manager gives message Bluetooth is not ready... Help. Thank you. James.

  • LATEST graphics drivers from Intel for aspire 5745G

    Hello I installed the latest graphics driver available on the acer support site. But some apps still needs version over her most recent. If I didn't update my vga drivers, I am unable to run these applications. But I want to somehow run them WITHOUT