Clear the password BIOS on Satellite Pro A300

Similar Questions

• Need version of the default BIOS for Satellite Pro A300

  Hello!

  Anyone know what is a default version of the BIOS in my Satellite pro A300 PSAGDE 1NT? I bought it in 2008. I found that an updated version of it on technical support, what is insyde 2.20 WIN.
  If anyone has the same previous type of BIOS, will it be possible to make a file of recovery for me? This me is already damaged and there is nothing I can do.

  Thank you!

  What do you mean with corrupt?
  What is the problem here?

• Re: How to disable the BIOS on Satellite Pro A300 - 1 2 pass?

  I have a Toshiba Satellite Pro A300 - 1 2, some how the BIOS got locked and a startup password has been enabled, I tried to get in the BIOS to disable the startup password but without any job.

  What I need to send or take it back to Toshiba to take them off for me?

  Thank you for your time.

  If the BIOS password does not work for you, you need professional help. Contact the nearest Toshiba service and they can remove it for you.

• Behavior of cooling after only the BIOS Flash - Satellite Pro A300

  Hello everyone,

  I have two laptop computers, Satellite Pro A300 Satellite A300. Both have the same configuration, C2D E8300 2 GB, ATI 3650 512 MB and so on...

  Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. Version 3.90 cooling was OK, fan worked only when it was necessary. But now after that flashing the BIOS fan runs constantly, he does not stop.

  What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  My question is, what is the problem with cooling in the new version (v4.20)? And how to fix this?
  Yet once again, the problem did not exist before flashing the BIOS and the problem is on both computers.

  Thank you very much for your help!

  Best regards
  Osman

  > What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  I doubt that there could be something wrong, I want to say that you said that after changing the method in cooling Toshiba Power Saver, the fans don't run all the time
  Usually the cooling modules are controlled by energy savings and the BIOS contains only the table fan.

  Keyboard of my laptop or on the left side of the laptop becomes too hot because on this side, you find the cooling modules that blow hot air

  Nothing so unusual...

• How can I clear the CMOS/BIOS on Satellite L10 password

  HOW can I clear the CMOS/BIOS password?

  Hello

  Sorry to say this, but it of not possible to remove the BIOS password without help from the Toshiba authorised service provider.
  The special procedure is required to remove this password.

  Therefore, you have only one way out. Contact the ASP in your country and request removal of the BIOS

• How to install the recovery image on Satellite Pro A300?

  I have a Satellite Pro A300 and I need factory reset. I learned from my teacher of computers there is a unknown virus on this subject. Apparently, it has been downloaded when I downloaded Malware bites. I got the laptop free of Set - BC because I muscle Handi-trophy and get tired of writing.

  My teacher told me that I need to Factory Reset, but when I got the laptop, she had everything installed on, (kurzwell, Chrome, etc.) so I don't have the disc to factory reset. In addition, the virus has disabled everything that has anything to do with the internet, (Chrome, for example, Firefox, Outlook, malware bites, etc.).

  Y at - it all means I have factory reset the laptop without the need of the disc.
  Any suggestions will help.

  Thank you

  Hello Steve

  Portable, delivered without reinstall drive have recorded on the HARD drive recovery image and if you're still using an original preinstalled operating system you can try to install this recovery image according to the recovery procedure. How to this is described in the document s user manuals or you can do this following statement described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  It works for you?

• How to remove bios password BIOS on Satellite Pro M30

  How to remove the password of BIOS on Toshiba Satellite Pro M30

  Post edited by: Admin

  I'm afraid to tell you, but to do this, you will need to contact local ASP.
  Because it's not easy or possible how you would do this on deskopt PCs.

  That's why you have to take your ASP. Guys it can remove the password.

• How can I reset password BIOS on Satellite Pro M30?

  Hello!

  I have a portable Satellite Pro M30 and my son has changed my bios password and now I can't even start it! How can I reset the bios? Where is the bios battery out of MB, then reset as in desktop? Is there a jumper for the deal if all else fails? What should I try?

  Thank you all in advance.

  John.

  Hello John

  Remove the CMOS battery didn't help much. If the removal of the BIOS can be so easy, remove the password on the stolen units may be too simple. Please don? t wait that these information will be posted here.

  You can contact the after-sales Service of Toshiba partner. They will remove password for you.

  Good luck!

• I can't access all the settings BIOS with Satellite Pro M10

  Hello, I have a little problem with my satellite pro m10.
  When I press the button 'on', I see the toshiba logo. (normal)
  I want to get into the bios, I push the button "esc". Now, I see the message "check system. Then press [F1]. So, I push the F1 button.
  Now I can see "password ='"
  I push the button directly enter, and I have access to the bios. But my problem is that I can only change the date/time, password and the hard drive password.
  I can't access to other environments, such as boot priority, show, another.

  In the beginning, I think it's the fault of password, but I try to change it and I have no results.

  Please help me.
  Kind regards

  Hello

  What happens when you remove the BIOS password?
  Have you tested it? If this is not the case, check it.

• How to install the new BIOS for Satellite Pro M50 under Ubuntu

  I am running Ubuntu on my M50 Pro. Could someone advise me what is the latest BIOS and how to install it?

  The update of the BIOS here site seems havean exe file but I couldn't see the BIOS file to the breast?

  Thank you

  Why do you want to update the BIOS?
  You have any big trouble with your laptop?

  The European driver Toshiba page provides BIOS BIOS for Vista and XP.
  Both versions of the BIOS must be completed while the operating system is running!

  If you use Linux on your laptop, you will not be able to update the BIOS!
  Do you understand?

  Once again; Updated the BIOS should be carried out ONLY if it of absolutely necessary. In other cases don't update!

• Re: Unable to download the BIOS for Satellite Pro A300

  BIOS - 20090430112041.zip

  Why can't I download the update of the bios?

  does anyone else have this problem?

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=43184

  Looks like a server problem I think it should be solved in next time

• Re: Unable to download the updated Bios for Satellite Pro A60

  Why I can't download the biosupdate on your Web page?

  Don t know why you couldn't download the BIOS of Toshiba Europe page.
  But I can't do that

  Seems that there is nothing wrong with the page, but maybe with your laptop settings (IE, Firefox, etc.)

• Satellite Pro A300-28V - my bluescreens disappeared when the BIOS has been upgraded

  I'm curious to know about it. The machine is a Satellite Pro A300-28V with Vista32/Win7.
  Had problems with bluescreen dumps referring to 'iaStor.sys '. I was about to send the laptop in for repair when I made this last effort to resolve the problem. Upgrade 1.9 to 2 BIOS, 1 - Win.

  All of a sudden my system image succeeded! Even at an Iomega home network HDD. Without complex!
  No blue screen exports even at startup 'cold' (after a free night)!

  For now, I leave the computer in sleep mode while I am at work. Let's see if he managed a day without landfills.

  What is the technical difference between 1.9 and 2.1 BIOS? No idea if it's something with iaStor.sys to do?

  /ssstsg

  Spelling was edited by: ssstsg

  Hi mate

  This is really good news as your BSOD displeasured after the BIOS update.
  The BIOS give instructions to the test power - on self test (POST) and provide basic information on how to manage components of the laptop, as HDD, ODD memory, that are required to load the operating system.

  Who knows, what was changed in the update but the main thing is that all the work and the update solve your BSOD

  > No idea if she has something with iaStor.sys to do?
  iaStor.sys is part of the SATA driver who is required to recognize the HARD drive using AHCI mode.

• Satellite Pro A300-28R - how to enable virtualization in the BIOS?

  I tried to enable the setting of virtualization in the BIOS and the setting is disabled and I was unable to change the setting to activate. I have flashed the BIOS to the new version, and now how to enable virtualization has completely disappeared.
  The laptop model is Satellite Pro A300-28R with Windows 7 Professional and BIOS version 2.10.

  How do I enable virtualization setting so I can run Windows Virtual PC mode to run compatible programs XP?

  Hello

  Did you check the specifications of your laptop first?

  The fact is that the processor must support this virtualization and according to the Web of Toshiba site, your laptop is equipped with processor Core 2 Duo T5870.
  I checked this on the page of Intel CPU and virtualization isn't supported. That means t, you can use this feature!

  Here you can see this:
  http://Ark.Intel.com/product.aspx?ID=37034

• Satellite Pro A300 - touchpad failed after BIOS update

  After that good BIOS update 2.00 to 2.10 / suggest by ALERT TEMPRO - http://support1.toshiba-tro.de/tedd-files2/0/bios-20091125132031.zip/ the touchpad of my Satellite Pro A300 - GR 1 stopped working.
  He appears under the name hidden in Device Manager. The State of the device - "this device is not present, is not working properly or is not all its drivers installed." (Code 24) "reinstall the driver has no effect of course. I can also access the BIOS utility when you start pressing F2.
  Running Vista Business 32-bit Edition.
  Ideas to solve the problem will be highly appreciated!

  Hello

  Normally, it should be possible access the BIOS, if you press F2, once you have turned on the laptop. Please check again and load the default settings there.
  And you cannot access the BIOS if you shut down the computer.

  You can use an external mouse on the laptop? Please check this too.

  I've also updated the BIOS on my Satellite A300 but I n t have a problem with the touchpad after the update.