Clear dash prompt when the user quits the dashboard

Similar Questions

• How to avoid displaying the command prompt when the resumption of hibernation?

  How to proceed: in Control Panel, set the power Option when I press the power button to avoid display the command prompt during the recovery from hibernation, or use a script to close the command prompt at startup.

  Hello

  Thanks for posting your query in Microsoft Community.

  You can try the following steps and check.

  Press Windows key + R, type in msconfig and click OK

  Click on Startup tab, right-click on command prompt and click Deactivate

  Click OK

  Restart the computer and check.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• FTP command does not when the current folder is not on the system drive

  I have the following problem when I activate FTP from the command prompt when the current folder is not on the system drive.

  I have a similar problem when you use a client FTP (ftprush)... It is installed on the D:\ and activation with the startup in D:\ folder reports 10038 (invalid socket handle)... It works fine when the startup folder is c: drive

  (MON C:\ est un petit SSD où j'ai mis les programmes opérationnels et les applications les plus utilisées)... my D: drive is a program for non-intensif progs disk)

  I have check the environment variables but can't find anything wrong with them, and I never touched at these

  Current folder is on my c drive windows :\---> works OK and I can open an FTP site

  C:\Windows\System32>FTP

  FTP > quit

  
  

  I change the folder to the very second disc---> broken, the report "ftp:socket" and the existsd.

  
  

  C:\Windows\System32>d:

  D:\>FTP

  
  

  FTP: socket

  D:\ >

  
  

  
  

  
  

  I managed to solve my problem by making a

  command "netsh winsock reset."

  This solves all my problems... including ftprush, filezila, starting the ASP.NET Server in Visual Studio (which also refused to)

  implementation)

• Go to the dashboard Pages...

  Experts-
  
  I have a requirement where in... I have a main report, the report of Sub - 1, sub - 2
  
  I have a Master Page in pension DAHS with guests and a main report.
  
  When I click on a column of the report (I set sail in the property of the column to another report). He must think I'm a part of detail where it has two sections, first section should have a report (sub - 1) and the second section must be lower than the first article and has to do more. (sub - 2 ratio)
  
  I activated navigate feature in a column of the report main page in dashboard...
  
  But I could place only a single report in the detail section.
  I do not know how to place the second report under the first report in the detail section. I need all the guests/presentation variables must be passed on to my all subreports.
  
  Help, please!
  Thank you!

  HI user

  Create a page with same guests (as in the homepage) and subreports and hide the page. In the column homepage main report gives the navigation to this dashboard page. On this page give columns requested and scope of the prompt in the dashboard. Hope it resolves your problem

  Thank you
  Disney

• How to create guests for the sections of the dashboard?

  Hi Experts,
  
  
  I have a dashboard that includes two sections. We got a report and another has another report. When a user opens this dashboard should be a prompt that asks that one to show. user select section 1 or section 2 and he should see what he meant. How to do this?
  
  
  Help, please.
  
  
  Kind regards
  Knani

  Hello

  YAA... This can be done using guided navigation for conditional sections properties.

  See what...

  http://oraclebizint.WordPress.com/2008/01/17/Oracle-BI-101332-selecting-reports-from-Dashboard-prompts-and-guided-navigation-sections/

  In your case, you must write a query that displays... Section1 and section 2 in command prompt.
  And the need to create 2 reports with Section1 as section 2 and filter as another filter.

  Apply the properties of guided navigation to each section in dashboard as shown in this article...

  It may be useful

• Hidding in the dashboard Section

  Hello
  
  Can someone help me on this please
  
  The requirement is to make a dynamic dashboard where I want to hide some views in the article. IAM doing a Top 10 customers of revenue to regions of the United States, EU, AP. and I gave a dashhboard page guest like "REGION" for the United States, the EU and the AP. This time, I have created a section of the dashboard with three different views for US, EU, AP
  
  If I select any region from the prompt, I should be able to see the three points of view and if I choose the American region, the views of the EU and AP should be hidden. How to get there?
  
  any help will be greatly appreciated.
  
  Thank you
  
  Linda

  On the page of dashboard edition, there are properties for each section to set. One of them is the guided navigation. With a guided navigation, you can show or hide a section, according to the results of another query. When this 'conditional' request return lines, you can decide to show (or hide) the section.

  First, you must create a separate section for each request. "When you select" US "in the dash prompt then only indicate the section with the American report. The other sections need to be hidden, no?

  You must now create conditional queries, which means that 'US' is selected in the dashboard line:
  (1) the conditional request for U.S. section must return lines-> U.S. section will be hidden
  (2) the conditional request for the EU section should not return lines-> section EU will be hidden
  (3) the conditional request for the AP section should not return lines-> AP section will be hidden

  Then you must think wisely how to create these conditional requests.
  You can consider a request now only the column of the region.
  Then you add two filters:
  For the request of condtional US:
  (1) region is equal to (protect US this filter with filter option)
  AND (2) region is invited

  To demand parole of the EU:
  (1) region is equal to EU (protect this filter with filter option)
  AND (2) region is invited

  To demand parole from AP:
  (1) region is equal to AP (protect this foli with filter option)
  AND (2) region is invited

  What happens when you select EU in the dash prompt:

  The conditional request US not returns no lines-> U.S. section will be hidden.
  Demand of the EU conditional returns to lines-> section EU will be visible.
  The request of condtional AP don't returns no lines-> AP section will be hidden.

  Kind regards
  Stijn

• Clear HOWTO #{securityContext.authenticated} when the user opens a new tab in the browser

  Hello world

  I use a template for my ADF Application, so I make the application menu depending on whether the user is authenticated or not, if the menu is not displayed in the login page and use a common template for all my pages:

  rendered = "#{SecurityContext.Authenticated} '"

  My problem is that the value remains, so I would like to know what is best practice to turn it off when the user opens a new tab, or maybe my approach is quite wrong?

  Thanks experts!

  Jose.

  Hello

  I changed the method, so I give the menu according to a 'login' property in a managed bean:

  With the corresponding accessor:

  public boolean isLoginPage() {}

  Var currentPage = FacesContext.getCurrentInstance () .getViewRoot () .getViewId ();

  If (currentPage.contains ("login")) {}

  return (true);

  } else {}

  Return (false) End Function

  }

  }

  Thanks for your help!

  Jose.

• Want to just clear the values in the command prompt when moving between pages

  Hello
  
  I wanted to know if its possible.
  
  I want to erase the prompt value when moving a page to another page in the dashboard is
  should show the way it was when displaying arriving first to the page. Is this possible?
  The problem is that I have a guest of the region as well as a few other guests of column in page 1
  Still in page2, I have even invited to the region and another message from page2 column.
  I think that since the same tablename.colname when I select the APAC region is mentioned guest in page1
  in page 2 also APAC is selected by default
  
  I want to avoid this?
  
  I use obiee 11g
  
  Thank you

  Jin

  have you checked the scope of your prompt? Make a prompt page and it should solve your problem.

• Office 2007 security updates do not settle on XP SP3. Manual installation with the user account via the Web site to download works. But when the same file is launched via a regular command prompt, it fails again.

  When the update is installed manually it can also not be removed from the "Add/Remove Programs" dialog box (as here again the system seems to start the real uninstall process)

  Windowsupdate.log error code example:
  First failure for update {D12D15B0-9568-415B-8D2D-4CBF40B93C84}, transaction error = 08024200 × b, result MSI = 0 x 80070643, MSI action is CostFinalize

  We have this problem on about 10 machines XP (of 300)

  We tried things:
  Attach it to MS
  Office relocation
  DARE related things
  Chkdsk /r
  and much more...
  (everything we could find on similar problems)

  Hey Wallstand,

  Thanks for posting in Microsoft Answers.

  This forum is for consumers to related issues. This seems to be a problem with Windows Update in a work environment. Therefore, it will be more suitable in the Microsoft TechNet Forums. Please visit the link below to find a community that will provide the support you want.

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope you find the resolution as soon as possible.

  Nice day.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think

• stay on the current page. When the user presses ESCAP.

  int

  if (type1 is Dialog.OK)

  {

  intask (Dialog.D_YES_NO, "Please confirm");

      if (type is Dialog.YES)

  {

  perform your task if yes

  ClearAll();

  Login_Screen.disconnect ();

  UiApplication.getUiApplication () .pushScreen (new L_Screen());

  }

  }

  if (type1 is Dialog.CANCEL)

  {

  What should the code because I want to stay on the page current user //press whe cancel but

  }

  Type1 = Dialog.ask (Dialog.D_OK_CANCEL, "Do you want to disconnect now?");

  Hello friends,

  I do the page to disconnect. I want to give confurmation beform logout. Everthing is working. but

  Aler dialogue ask first you want to disconnect or not?

  If he says cancle I want to stay on the current page. but still he go on the back. When your press esce I check everything.

  Please tell me what is the code to stay on the current page when the user press cancle alser dialogue?

  That's what I understood.

  I don't think you understood what I was saying. so here's an example of code:

      protected boolean keyChar(char character, int status, int time) {
          switch (character) {
              case Characters.ESCAPE:
                  confirmClose();
                  return true;
              default:
                  return super.keyChar(character, status, time);
          }
  
      }
  
      private void confirmClose() {
          int resp = Dialog.ask(Dialog.D_YES_NO,"Do you really want to Quit",Dialog.NO);
          if ( resp == Dialog.YES ) {
              resp = Dialog.ask(Dialog.D_YES_NO,"Do you really, really want to Quit",Dialog.YES);
              if ( resp == Dialog.YES ) {
                  // Close the screen as you currently do it
              }
          }
      }
  

  If you don't mind asking me, please use English. for example, the letter "y" is, is not the question why.  I recommend this spell check you your messages also, don't forget that a lot of people who use these forums are not native English speakers, so we use English must be as clear as possible.

• When the Admin sign on the office comes to the top, but after that the computer does not respond when the user tries to do anything. There are actually turns off the computer with the power button.

  Original title: user profile

  My administrator user profile does not work properly, but I have a user profile that has activated the parental control that worked well for about a year and yesterday when this user logs on the desktop comes up, but after that the computer does not respond when that user tries to do anything. There are actually turns off the computer with the power button.  I ran a virus scan and spyware scan in my user admin profile and he has not found anything.  I don't know what to check.

  Hello rhunter15,

  There may be a program to interfere with Parental controls so that we can try a few things to see if we can determine the application or program that is causing problems.

  First of all, we run System File Checker to see if you have a corrupt file system.

  • Click Start
  • Click on all programs
  • Click Accessories, and then right-click on the command prompt.
  • Select the Security tab and choose "Run as Administrator"
  • Click on command prompt
  • Type SFC/scannow.

  It will scan and repair any damaged operating system files.

  To determine if there is a program because of a conflict, we recommend that you perform a "clean boot" of the computer. A clean boot is designed to disable programs and services in the background as much as possible. This helps determine which service or program can be the cause of the problem.  For more information about how to perform a clean boot for troubleshooting, click the number below to view the article in the Microsoft Knowledge Base.

  KB 929135 - how to solve a problem of performaing a clean boot in Windows Vista.
  http://support.Microsoft.com/kb/929135

  Once you have finished the clean boot, check again and see if you get the error of parental control.

  If please post again and let us know if that helped pinpoint the problem or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

  Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

  You have two options:

  • Perform the action under high administrator privileges.
  • Turn off UAC (not recommended).

  Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.

• Make the text appear in the box when the user clicks on the part of an image

  Is there an easy way to do this in the Muse?

  (1) do different areas of an image map.

  (2) automatically type the letter 'A' in a text box when the user clicks the area 'A' and so on.

  Thank you!

  Essentially, you want a keyboard on the screen? This is not possible with the standard tools of Muse. It would be quite simple with Javascript, however.

  David

  Creative muse

• When the adobe application manager loads up, enter user name and password, continuous coming unable to contact adobe, please connect to the internet and try again.

  When the adobe application manager loads up, enter user name and password, continuous coming unable to contact adobe, please connect to the internet and try again.

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Sound signal when the user changes the status?

  Hello everyone!

  I'm quite new to Acrobat Connect Pro in the role of a trainer. It ist one feature miss me: an acoustic signal or notification when a user changes his status.

  For example, Users must satisfy a task that takes several hours. Coach, I'm online all the time to help as needed. But I need to watch my screen all the time for notice if someone has a question. I would like, there will be some sort of sound signal. Is there something like this? If this is not the case, this could be a feature request.

  Greetings

  Marcel

  To use the doorbell pod to connect, simply download the SWF to a sharing module in your room (even by uploading a JPG or PPT). Should that pressure manual button when someone 'status' changed, but that may be the method of the student to notify you that they are made to their task.

  If you feel that you need the exact feature you described above, you can check to build your own custom pod (should you be savvy with AS3) using the Collaboration Builder SDK found here, Adobe Acrobat Connect Pro | Adobe Developer Connection, or you could reach to one of the groups which proposes the establishment of custom pods. ActiveC is one of these companies, custom - development ActiveC.biz.

  Connect is unique in offering the possibility of creating your own functionality should the default options does not meet your needs.