Cleared for hard drive Windows repair disc

Similar Questions

• HP pavilion dv6-3079tx: lost drivers after crushed hard drive and repair discs

  Hard drive crashed and replaced the HDD with ssd, lost all recovery disks then upgrade to 8.1 windows now I have not all drivers as finger print scanner and cd discs won't load. It's a hp pavilion dv6-3079tx

  Help, please

  Thank you

  @Leady05 ,

  Hello and welcome to the HP support forums.  Sorry to hear about hard drive failure.  Now for the bad news.  There is no driver support for windows 8.1 for your laptop.

  The laptop was produced with Windows 7 32-bit and 64-bit edition not windows 8 or 8.1, so it's drivers did not support to your system unless you reload Windows 7.

  HP Pavilion dv6-3079tx Entertainment Notebook PC Drivers

  This link provides all the drivers for your system.  If you reload windows 7 you will have no problems.

  Thanks for posting and have a great day.

• Windows problem for hard drive replacement

  I am trying to replace a hard drive in a HP d530 for a science teacher as the XP is a failure. He needs the XP until I finished preparing the Windows 7 and it has data on the XP and I put Windows 7 on the new hard drive and it has 80 GB. The old hard drive Windows XP and it is a 40 GB. I had two hard drives hooked when installing Windows 7. Windows 7, the name is the C drive and disk XP the D. I tried to start the hard drive of 7 single and it gives me an error of invalid system disk. Press a key to reboot. When I have two connected hard drives, windows 7 starts very well. A computer teacher wants to clone Windows 7 for another professor of science. He said, it won't help him with two hard drives connected. How can I get on the 80 GB stand-alone installation without having to reinstall Windows 7 Windows 7. I want to disconnect the hard drive from XP and just use the hard disk 7. I have the 7 and XP on separate hard drives. They are the two IDE hard drives. I need to get the new hard drive to boot by its self and windows 7 as a stand-alone installation.

  That's good news.

  I'm so glad you took in charge.

• Run CHKDSK /F to check for hard drive corruption. STOP: 0x0000007B__Blue screen

  I have a Vista 64 bit OS.  I tried to do a system restore to the last checkpoint to interrupt a Service Pack.  Restore failed (don't remember exact error), now when I try to boot Vista, I get a message saying to run CHKDSK /F to check for hard drive corruption.  STOP: 0X0000007B
  My questions are:
  (1) do I need Vista recovery CD in order to enter the menu advanced at this stage startup options?
  (2) if I decide to upgrade to Windows 7 now, made the stop: 0x0000007B have a problem with that?  or could I fall in Windows 7?
  Vista 64 gave me many problems and I think its time to make him... Thanks in advance... Mark

  Hi Markgod5,

  Thank you for visiting Microsoft Answers.

  It seems that the hard drive is damaged if we get this error message to running chkdsk.

  You can start the computer in safe mode with command prompt and see if you can start.  Then run the chkdsk command.

  To do this follow these steps:

  (a) restart your computer if it is running.

  (b) press F8 after your computer powers initially on.

  (c) once you see the menu Advanced Boot Options, you can stop tapping.

  (d) use the up/down arrow keys to select Safe mode with command prompt.

  (e) in the command prompt window, type the following command and press enter Chkdsk /R and Chkdsk /F

  Using recovery DVDs, you cannot switch mode winRE (Windows Recovery Environment) to run chkdsk. You need DVD full version (Win 7/Vista) or Vista repair disk.

  You probably won't be able to install win 7 because the problem is with the hard drive and chkdsk should be run for the error.

  Hope the helps of information. Please post back and we do know.
  Joel S

• Get an error "Windows repair disc has stopped working' when creating Windows 7 repair disc.

  * Original title: Windows 7 cannot create a repair disk

  Hello

  I have a new alienware desktop computer running windows 7. When I try to create a system repair disc, I get an error message that says that Windows repair disc has stopped working, this happens until I get to the screen that allows to select a drive. Here is the crash report. I have read some of the related posts and I don't think I have the synchronization of the box and I did not backup Dell although I have something called AlienRespawn.  Please help thanks.

  Problem event name: APPCRASH

  Application name: recdisc.exe

  Application version: 6.1.7601.17514

  Application timestamp: 4ce7990e

  Fault Module name: ole32.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c92c

  Exception code: c0000005

  Exception offset: 00000000000284fb

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: e574

  More information 2: e57488545f86d383cf00c40c411daee5

  3 more information: 6d8c

  Additional information 4: 6d8c259a187c440c17982de29c5dc6e7

  Hello

  The problem was definitely Alienrespawn. I was able to create the with Alienrespawn recovery disk and turned off once I was able to create in Windows 7.

  Thank you very much for the help!

• How to clear the hard drive on my old iMac of 2008?

  I have a 2008 iMac I want to recycle. How to clear the hard drive?

  (What is PPC?)

  PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

• How to use the utility disk first aid for hard drive internal el captian

  How to use the utility disk first aid for hard drive internal el captian

  Select the drive and click first aid.

  If something is not repairable because this is the system drive, then you need to start using the recovery partition and run disk utility it.

• Satellite 1410: I forgot the password for HARD drive

  Hi Please help!

  I have toshiba satellite 1410 series...
  I think that the hard drive was full and it was locked.
  I really need to get to this unblock as im very new to comps. whenever I start my pc it ask me password for HARD drive...
  I need all the help to get this open

  Help, please

  Hello

  AFAIK, you need the old HARD drive password to clear the password disk HARD asking.
  If you have forgotten the password to disk so you don t have any other possibility to get into the HARD drive. In this case, the HARD disk is unusable and unfortunately you need a new HARD disk drive. :(

  Best regards

• can I have installed hard drive window

  My dear, I have a problem. I have dell core i3 with Windows vista. When I buy my albums lab 1 window cd also available. After a while a window installed from the CD and after that I received an error when start my lab top and I can't installed some drivers like DOLL bilu and wireless. now I want to reinstall the window of hard drive... is it possible? and how it is possible

  right on the c drive, I can see folder 2 window as follows
  1 window
  2 old window
  my friend please tell what can I do now to restore the hard drive window

  You cannot reinstall hard unless make you it bootable and copy the installation files. I really don't understand what you're saying here, something about drivers. IF you are unable to install them, download and manually install (drivers on the manufacturer's Web site from your)

• Pavilion g7 2325dx: info from the BIOS for a correct start of the drive to a new hard drive windows

  My hard drive is dead and he needed replacement. Did. Had initially been Windows8, but upgraded to Windows 10. Impossible to re boot with drives of resettlement. Need BIOS startup specs, screen info to use disks.

  Hey Bettyboophume,

  No worries! If you have recovery media, you should be able to put it in and have the laptop back on it. However, just in case where that is not the case for you, there is a document called configuration of the Boot in the BIOS system order.

  The boot order can be configured on the Advanced tab in the BIOS Setup menu. The procedure for changing the boot order may vary according to the model of the computer.

  HP Pavilion Notebook PC Maintenance and Service Guide of g7, on page 90, Chapter 7, backup, restore, and recovery (Windows 8) you will see that it says:

  Change the order of computer startup if the computer does not restart in HP Recovery Manager, you can change the order of the computer startup, which is of the order of the devices listed in the BIOS where the computer searches the startup information. You can change the selection to an optical drive or a USB flash drive.

  To change the boot order:

  1. Insert the HP Recovery Media, that you have created.

  2 restart the computer.

  3. press on and hold esc while restarting the computer and then press f9 to boot options.

  4. Select the optical drive or you want to boot from USB flash drive.

  5. follow the on-screen instructions.

  I hope this helps!

  I would like to know how it goes

• Install Windows 7 on a Compaq Presario CG61 - driver for HARD drive

  Hello everyone,

  because of my Compaq Presario CQ61-423SG HARD drive (series: edited by moderator) broke (and with it the recovery partition), I would like to install a new Windows 7 (home premium, 64-bit) on the new HARD drive.

  Initially the program is in need of a driver for the HARD disk installation. On the HP site, I can't find. Can someone help me? Where can I get a driver for my laptop?

  Thank you.

  Hello:

  I am very surprised that Windows 7 requires a driver disk for the model controller.

  In any case, I compressed upwards and tied the drivers you need (look under the line attachments at the bottom of my post).

  Now, here's what you have to do...

  Extract the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• Windows of more experience rating for hard drives

  System Specs:
  Windows 7 Home Premium 64-bit
  MSI NF980-G65
  AMD Phenom II X 4 965 BE 3.4 ghz
  GeIL Black Dragon 4 x 2 GB 1600
  GTX 295
  GTS 250 dedicated physx
  2 x Western Digital 500 gb 3 gb/s

  My custom pricing windows is 5.9, which is the lowest score I and is because of my hard drives, as you can see below:

  Component	Details	Sub-index	Base score
  Processor	AMD Athlon (TM) II X processor 4 965	7.4	5.9 Determined by lowest subscore
  (Vivid RAM) memory	8.00 GB	7.5
  Graphics	NVIDIA GeForce GTX 295	7.8
  Games graphics	Available 4 095 MB total graphics memory	7.8
  Primary hard drive	828GB free (931GB Total)	5.9

  So my question is what am I doing wrong? When I chose the bad HDD? I've got together 2 drives HARD to the top in a raid interlaced with optimum setting. I think that it is 64 k, Ill have to look in the bios set up again.

  Thanks in advance for the advice :)

  I remember this thread...

• How can I search for ALL photos on my hard drive, windows 8?

  I had windows xp and all I had to do was to go to research and select the photos and ALL photos on my computer would come. How can I do this with windows 8?

  If you open your hard drive in the file Explorer, you can use the wildcard character * to search for something as *.jpg to find all JPEG images.  Doing this would look like with that by typing in the search box:

  

  But you can find all the images, even if they are other types (.bmp or .png or .gif).  To do this, use the search toolbar that appears at the top.  Use the type menu and tell him you want to search for all images.  It is quite similar to XP, except you get more choice.

  

• How to clear the HARD drive for confidential data before attaching to the third party?

  My HARD drive needs to be fixed and would like to know how to erase confidential data in the HARD drive before giving it to third parties.

  Reformatted would it be sufficient?

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  The best way in my opinion is using AutoNuke in Dban. Make sure you have the desired data off the drive hard until you execute Dban. Once you run it, it's over.

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.