CLI admin for nodes of the ise

How CLI admins can be created for node ISE cisco?

Is not documented, but do not see there is a limit. However you can point the admin access to AD now in the latest version of the ise. You can map ad groups to a specific role within the configuration preset of the ISE.

Thank you

Tarik Admani
* Please note the useful messages *.

Tags: Cisco Security

Similar Questions

Best practices for the restart of the nodes of the ISE?

Hello community,

I administer an ISE installation with two nodes (I'm not a specialist of the ISE, my job is simply to manage the user/mac-addresses... but now I have to move my ISE a VMWare Cluster nodes to another VMWare Cluster.

(Both VMWare environments are connected to our network of the company, but are different environments. vMotion is not possible)

I want to stop ISE02, move it to our new VMWare environment and start it again.

That I could do this with our ISE01 node...

Are there best practices to achieve this? (Stop request first, stopl replikation etc.) ?

Can I really just reboot a node ISE - or I have consider something before I do this? After I did this?

All tasks after reboot?

Thanks for any answer!

ISE01
Administration, monitoring, Service policy
PRI (A), DRY (M)

ISE02
Administration, monitoring, Service policy
SEC (A), PRI (M)

There is a lot to consider here. If changing environments involves a change of IP address and IP extended, then your policies, profiles and DACL would also change among other things. If this is the case, create a new VM ISE in the new environment in evaluation license using the and recreate the old environment deployment by using the address of the new environment scheme. Then a new secondary node set rotation and enter it on the primary. Once this is done, you can re - host license from your old environment on your new environment. You can use this tool to re - host:

https://Tools.Cisco.com/swift/LicensingUI/loadDemoLicensee?formid=3999

If IP addressing is to stay the same, it becomes simpler.

First and always, perform an operational backup and configuration.

If the downtime is not a problem, or if you have a window of maintenance of an hour or so: just to close the two nodes. Transfer to the new environment and light them, head node first, of course.

If the downtime is a problem, stop the secondary node and transfer it to the new environment. Start the secondary node and when he comes back, stop the main node. Once that stopped services on the head node, promote the secondary node to the primary node.

Transfer of the FORMER primary node to the new environment and turn it on. She should play the role of secondary node. If it is not the case, assign this role through the GUI.

Remember, the proper way to shut down a node of ISE is:

request stop ise

Halt

By using these commands, the risk of database corruption decreases by 90% (remember to always backup).

Please rate useful messages and mark this question as answered if, in fact, does that answer your question. Otherwise, feel free to post additional questions.

Charles Moreton

How make the visible context for nodes in the level menu gave treeTable?
Hello

I use JDeveloper 11 g 10.1.1.4

I have a TreeTable component with 4 different levels (Contry-branch-city-object).
I need to show the custom menu contextual (right-click the Muse) items only for lines with 'object '.
Now, I do it with the help of the "visible" property
```
            <af:commandMenuItem text="Open" id="cmi1" immediate="true"
                                visible="#{backingBeanScope.mbMObjectsRegistry.MObjectNode}"
                                actionListener="#{backingBeanScope.mbMObjectsRegistry.btOpenMObject}"/>
```
```
    public boolean isMObjectNode() {
        Object oldRowKey = treeTableMObjectsRegistry.getRowKey();
        try {
            AppViewRowImpl row =
                BindingUtils.getSelectedRowTreeTable(treeTableMObjectsRegistry);
            if (row == null || !isMOBjectRow(row)) {
                return false;
            }
            return isMOBjectRow(row);
        } finally {
            treeTableMObjectsRegistry.setRowKey(oldRowKey);
        }
    }

    private boolean isMOBjectRow(AppViewRowImpl row) {
        return (row != null) && (row instanceof MObjectsRegisterMORowImpl);
    }
```
It works, but the problem is that it works a little more slow, particularly if I have 5 or more menu items.
Each menu item called the isMObjectNode() metod 3 times by opening the menu.

The question is: maybe, there is a method to calculate the level of the selected node? Or there is another variant?

Anatolii
The following example allows you to develop your usecase.
Here, we would show the menu items only for the nodes of level 3.

You can also download all of the POJO from sample to
http://adfsampleapplications.googlecode.com/svn/trunk/TreeSampleApplication.zip

The code is self-explanatory.
Let know, if you have any specific questions.

selectionListener = "#{bindings.continents.treeModel.makeCurrent} '"
rowSelection = "single" id = "tt1" columnStretching = "last" >

**
**
*
* to = "#{pageFlowScope.CurrentDepth}" *.
* Type = "popupFetch" / >. *
**
*
* visible = "#{pageFlowScope.CurrentDepth == 2? true: false}" / > * "
*
* visible = "#{pageFlowScope.CurrentDepth == 2? true: false}" / > * "
**
**
**

Thank you
Nini

How can I activate the "Host key" for my sftp to the ISE Server?

Hello

I can't copy my files to upgrade 1.2 ISE to my repositories the.

Here is a cut and paste of my CLI on one of my knots ISE after attemtping to copy from my workstation (running a SFTP server) to one of my nodes of ISE.

XXX-ise-01 / admin # s copyftp: / //ise-upgradebundle-1.1.x-a-disque 1.2.0.899.i386.tar.gz.:.

User name: Admin

Password:

% ERROR: backup failed due to one of the following reasons

1 host option key is not configured

2. the host key is removed due to the new image

3 host key is removed from any other depositary having same ip/hostname

% Please reconfigure the host key option

% Error: transfer not possible

I don't have whatever it is configured with the option "host key.

I googled and searched, but cannot find references limited to the "Host key" command within Cisco. I tried various forms of it on the ISE node with no luck.

I tried an FTP transfer, but it does not work.

Any ideas?

You can try to add a repository to your local configuration as an sftp server that should start the process host key.

Thank you

Tarik Admani
* Please note the useful messages *.

How to create a single init.ora file for node 3 RAC to the title of the ASM
All,

Our environment is that a combination of different memory machines (V880, V490 & 250R) SUN of size.
Establishing a single init.ora file that includes each of the memory of nodes in the SGA sizing is our desired configuration.
Although we have created the file, the question becomes each NŒUD on the FCAC to use this unique setting
file to launch its database instead of take the default init.ora file in the default directory (asm/dbs).

As we conducted tests of failover, on restarting the instances they have restarted with bad memory
definitions that have hung the nodes when it took more memory then what was available and the swap space has begun
to develop.

Steps to configure and activate the process, that's what I'm looking for.

Thank you

Gerry
Gerry,

Here's what we do. Don't know if it is relevant to your situation...

(on each node)
$ cat $ORACLE_HOME/dbs/initrac11d1.ora
SPFile='+Data/rac11d/spfilerac11d.ora'

(as ASM)
$ asmcmd
ASMCMD > ls - al + data/rac11d
Name of type Redund time scratched Sys
Y CONTROLFILE.
DATAFILE Y.
Y ONLINELOG.
FICHIER_PARAMETRES Y.
TEMPFILE Y.
N spfilerac11d.ora-online +DATA/RAC11D/PARAMETERFILE/spfile.267.685170285

The spfile has all the parameters, described by the node, if any. For example:

$ sqlplus / as sysdba

SQL * more: version 11.1.0.7.0 - Production Wednesday, may 6, 19:00:45 2009

Copyright (c) 1982, 2008, Oracle. All rights reserved.

Connected to:
Oracle Database 11 g Release 11.1.0.7.0 - 64 bit Production
With the Real Application Clusters option

SQL > create pfile='/tmp/sb.ora' of spfile;

Created file.

SQL > disconnected from the database to Oracle 11 g Release 11.1.0.7.0 - 64 bit Production
With the Real Application Clusters option
$ cat /tmp/sb.ora
:
* .archive_lag_target = 1800
*.audit_file_dest='/var/Oracle/admin/rac11d/adump '
:
rac11d1. Dispatchers ='(Address = (Protocol = TCP) (Host = msdbc11-VIP)(port=64000))'
rac11d2. Dispatchers ='(Address = (Protocol = TCP) (Host = msdbc12-VIP)(port=64000))'
* .global_names = TRUE
rac11d1.instance_number = 1
rac11d2.instance_number = 2
:
rac11d1.undo_tablespace = "UNDOTBS1.
rac11d2.undo_tablespace = "UNDOTBS2".
:

Hope this helps,

Steve

Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

The dialog box is like this:

[Stop using iCloud?]

Create separate password for (name of the admin account)

-You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

iCloud password: __________

New password: __________

Check: _

Index of password: __________

[Use the separate password?]

Not sure why that is, that the password does not when it's supposed to be the new s password?

Also, I would like to know what to put in the box check?

Help much appreciated!

Thank you

Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

HP Laserjet 200 color M251nw: I lost the password of admin for HP Laserjet 200 color M251nw

I lost the password of admin and also deleted the printer on my PC.

It is connected to the local network.

Thank you for the help

Waiting patiently

AlhamduLellah 'Thank God', I had!

Very simple.

Visit this link

https://www.YouTube.com/watch?v=UcNm9qyVdHc

It's for

How to reset HP LaserJet Pro 200 color MFP M276nw"

but it worked for me!

ISE server receives requests for authentication of the bridge VLAN, not the IP Address of the switch management

Hello

A 3850 catalyst switch has VLAN 20 (10.18.4.32/29) defined on it, which has a 10.18.4.38 gateway:

D01-01-BWY #show ip short int vlan 20
Interface IP-Address OK? Method State Protocol
Vlan20 10.18.4.38 YES manual up up

A server of ISE (SNS3415) is connected to a port configured on VLAN 20, with IP address of 10.18.4.33.

01-BWY-D01 has to a management interface of 10.18.4.17.

I created this switch as a device network in ISE and activated the RADIUS config and then configured the switch with the following commands:

RADIUS attribute 6 sur-pour-login-auth server
RADIUS attribute 6 support-multiple server
Server RADIUS attribute 8 include-in-access-req
RADIUS attribute 25-application access server include
dead-criteria 5 tent 3 times RADIUS server
RADIUS-server host 10.18.4.33 auth-port 1812 acct-port 1813 borders 7 1521030916792F077C236436125657
RADIUS-server host 10.18.4.35 auth-port 1812 acct-port 1813 borders 7 02350C5E19550B02185E580D044653

radius of the IP source-interface GigabitEthernet1/0/1

The problem:

When I test the functionality of RADIUS using the following command, it fails. HOWEVER, the customer (switch) IP listed in the error log in the front door of the VLAN 20 (!):

test the aaa group RADIUS server 10.18.4.33 auth-port 1812 Capita123 user radius acct-port 1813! new-code

10.18.4.38 is the gateway IP address of the VLAN that hosts the servers of the ISE, I don't understand why its listed in error as IP device logs!

ource Timestamp	2016-06-22 16:38:02.826
Receipt of timestamp	2016-06-22 16:38:02.841
Policy Server	GLS-ISE-01
Event	5413, accounting RADIUS-Request dropped
Reason for failure	11007 could locate no device network or Client AAA
Resolution	Check if the device network or AAA client is configured in: Administration > network resources > network devices
First cause	Could not find the network device or the AAA Client while accessing NAS by IP during authentication.
Type of service	Box
NAS IPv4 address	10.18.4.38

Other attributes

ConfigVersionId	118
Port of the device	1646
DestinationPort	1813
Protocol	RADIUS
ACCT-status-Type	Update-intermediate
ACCT-Delay-Time	15
ACCT-Session-Id	00000000
ACCT-Authentic	RADIUS
AcsSessionID	GLS-ISE-01/255868885/32
IP address of the device	10.18.4.38

If I reconfigure the switch to the ISE - peripheral network and give it the IP address of 10.18.4.38 (the ip of the gateway), my radius authentication tests suddenly becomes successful.

can someone clarify the situation what is happening here?

I need to be able to define multiple switches by their unique IP addresses.

Thanks for your time

Hello

The only time I saw that it was due to use a deprecated command: radius server host. There was a bug on the IOS XR platform as well.

Could you please reconfigure your order of RADIUS by using the new command: radius server? And test again?

The doc of Cisco for the new order:

http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/iDEN...

Thank you

PS: Please do not forget to rate and score as good response if this solves your problem

Check the ISE for the VPN Cisco posture

Hello community,

first of all thank you for taking the time to read my post. I have a deployment in which requires the characteristic posture of controls for machines of VPN Cisco ISE. I know that logically once a machine on the LAN, Cisco ISE can detect and apply controls posture on clients with the Anyconnect agent but what about VPN machines? The VPN will end via a VPN concentrator, which then connects to an ASA5555X that is deployed as an IPS only. Are there clues to this?

Thank you!

The Cisco ASA Version 9.2.1 supports the change in RADIUS authorization (CoA) (RFC 5176). This allows for the gesticulations of users against the ISE Cisco VPN without the need of an IPN. Once a VPN user connects, the ASA redirects web traffic to the LSE, where the user is configured with a Network Admission Control (NAC) or Web Agent. The agent performs specific controls on the user's computer to determine its conformity against one together configured posture rules, such as the rules of operating system (OS) patches, AntiVirus, registry, Application, or Service.

The posture validation results are then sent to the ISE. If the machine is considered the complaint, then the ISE can send a RADIUS CoA to the ASA with the new set of authorization policies. After validation of the successful posture and CoA, the user is allowed to access internal resources.

http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-Appliance-ASA-software/117693-configure-ASA-00.html

How to remove the entry for Hot Standby node in the odbc.ini file in Windows 7

Although I could see the file odbc.ini under c: Windows, there is nothing specific to hot standby node in the file. I use windows 64-bit computer and I have issues with my odbc DSNS when connecting to another application, I need to delete the entry for Hot Standby node in the odbc.ini file based on what I had as a solution to solve the problem. My mistake was "communication error with the connection process. Find target processes while they waiting for answer', when I tried to pull a few tables to a data source by using the ODBC DSN.

Hi Jay,

Thanks for posting your question in the Microsoft Community.

The question you posted would be better suited in the MSDN Forums.

I would recommend posting your query in the link below.

General Windows Forms:

http://social.msdn.Microsoft.com/forums/en-us/WinForms/threads

I hope that the information above helps you.

In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

ISE and WLC for sanitation of the posture

Please can someone clarify a few things regarding the ISE and posture wireless.

(1) is the ACL-POSTURE-REDIRECT used for conversion, or is it just an ACL to redirect some of the posture of the kickoff checking traffic?

(2) can / a dACL/wACL list must be specified as a sanitation ACL?

(3) the WLC ACL should be written in long format (manually specify source and dest ports/doesny direction any job?)

(4) does anyone have working example ACL for redirect (CPC) posture and sanitation (dACL)?

(5) any other advice or pointers would be as useful as any docs I have found so far, what he TrustSec2, CiscoLive or anything else, do not seem to help me understand sanitation and WLC posture

Thank you

Nick

Yes,

This means that strategy available to your customer does not have a rule that will correspond to an entrepreneur who joined the network. Can you post a screenshot of the provisioning of customer policy?

Thank you

Tarik Admani
* Please note the useful messages *.

Fill out the "limits" for nodes in a hierarchical query

Hello
I have a table called V that is organized hierarchically. You can have a "hierarchical" view by issuing the following query (PARENT_ID NULL is the root):
```
SELECT rn, 
       LPAD ('_ ', 2 * (LEVEL - 1), '_ ') || id tree,
       id, 
       parent_id, 
       lvl, 
       cbi, 
       tree_lft, 
       tree_rgt, 
       tl, 
       tr 
FROM v
START WITH parent_id IS NULL 
CONNECT BY PRIOR id = parent_id
ORDER SIBLINGS BY rn;
```
Now, my task is to fill in the TL and TR "limits" that define the beginning and end of each group under all nodes.
For a better understanding, I've already placed the expected results in the TREE_LFT and TREE_RGT columns. The hierarchy follows the order of the columns, RN.
TREE_LFT begins with the root (RN = 1) line 1 and lights up gradually until it reaches the leaves (CBI = 1). If a sheet is found, TREE_RGT is set to + 1 TREE_LFT.
Then, if another sheet follows (online RN = 4), it takes the next increment TREE_LFT + 1. And so on. When all the leaves under the node assigned a value for TREE_LFT and TREE_RGT,
the TREE_RGT value for the node takes the last value assigned to its + 1 children. For example, you can see that the children of the node id = 14 come from RN = RN = 30 3. The value of TREE_RGT
for the last child (RN = 30) is 58, so the TREE_RGT value for the node id = 14 will be 58 + 1 = 59.
Then the numbering continues gradually for the rest of the hierarchy. There is a new node to RN = 31, so TREE_LFT starts from TREE_RGT of the previous node + 1, that is, 60.
This logic continues until the end of the hierarchy following RN.
Using a STANDARD clause, I've managed to fill TL (you can see TL = TREE_LFT) and TR for the leaves.
I also managed to complete the TR for nonleaf with a second MODEL clause, but it runs very bad when the array is much more filled than that.
This is the STANDARD clause that allows you to calculate the TR:
```
select *
from v
model 
dimension by (id, parent_id, cbi)
measures (rn, tree_lft, tree_rgt, lvl, tl, tr)
rules (
       tr[ANY, ANY, 0] order by lvl desc, id, parent_id = max(tr)[ANY, CV(id), ANY] + 1
      )
      ;
```
It does the job as expected, but the generic as well as ordered rule is a killer when it is applied to a larger painting.
So my question is, is there a way I can write a query that would do the same as this one, but with better performance (functions analytical pattern)?
I know that I can not really clear that it is not easy to explain.
I use a database with 11.2.0.3 Enterprise Edition.
Thank you
Here are the scripts to test:
create table v (RN NUMBER, NUMBER identification, PARENT_ID NUMBER, TREE_LFT NUMBER, TREE_RGT NUMBER, CBI NUMBER, NUMBER of LVL, TL NUMBER, NUMBER of TR);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (1, 3, null, 1, 100, 0, 1, 1, null);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (2, 14, 3, 2, 59, 0, 2, 2, null);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (3, 224, 14, 3, 4, 1, 3, 3, 4);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (4, 221, 14, 5, 6, 1, 3, 5, 6);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (5, 236, 14, 7, 8, 1, 3, 7, 8);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (6, 218, 14, 9, 10, 1, 3, 9, 10);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (7, 230, 14, 11, 12, 1, 3, 11, 12);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (8, 234, 14, 13, 14, 1, 3, 13, 14);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (9, 235, 14, 15, 16, 1, 3, 15, 16);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (10, 253, 14, 17, 18, 1, 3, 17, 18);
insert into v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) values (11, 245, 14, 19, 20, 1, 3, 19, 20);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (12, 231, 14, 21, 22, 1, 3, 21, 22);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (13, 228, 14, 23, 24, 1, 3, 23, 24);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (14, 243, 14, 25, 26, 1, 3, 25, 26);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (15, 219, 14, 27, 28, 1, 3, 27, 28);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (16, 220, 14, 29, 30, 1, 3, 29, 30);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (17, 229, 14, 31, 32, 1, 3, 31, 32);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (18, 248, 14, 33, 34, 1, 3, 33, 34);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (19, 244, 14, 35, 36, 1, 3, 35, 36);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (20, 254, 14, 37, 38, 1, 3, 37, 38).
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (21, 247, 14, 39, 40, 1, 3, 39, 40);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (22, 225, 14, 41, 42, 1, 3, 41, 42);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (23, 226, 14, 43, 44, 1, 3, 43, 44).
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (24, 249, 14, 45, 46, 1, 3, 45, 46);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (25, 250, 14, 47, 48, 1, 3, 47, 48);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (26, 252, 14, 49, 50, 1, 3, 49, 50);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (27, 251, 14, 51, 52, 1, 3, 51, 52);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (28, 246, 14, 53, 54, 1, 3, 53, 54);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (29, 256, 14, 55, 56, 1, 3, 55, 56);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (30, 255, 14, 57, 58, 1, 3, 57, 58);
insert into v values (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (31, 15, 3, 60, 75, 0, 2, 60, null);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (32, 222, 15, 61, 62, 1, 3, 61, 62);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (33, 223, 15, 63, 64, 1, 3, 63, 64);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (34, 241, 15, 65, 66, 1, 3, 65, 66);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (35, 242, 15, 67, 68, 1, 3, 67, 68);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (36, 227, 15, 69, 70, 1, 3, 69, 70);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (37, 213, 15, 71, 72, 1, 3, 71, 72);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (38, 214, 15, 73, 74, 1, 3, 73, 74);
insert into v values (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (39, 16, 3, 76, 81, 0, 2, 76, null);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (40, 238, 16, 77, 78, 1, 3, 77, 78);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (41 237, 16, 79, 80, 1, 3, 79, 80);
insert into v values (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (42, 17, 3, 82, 85, 0, 2, 82, null);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (43, 239, 17, 83, 84, 1, 3, 83, 84);
insert into v values (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (44, 18, 3, 86, 99, 0, 2, 86, null);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (45, 232, 18, 87, 88, 1, 3, 87, 88);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (46, 233, 18, 89, 90, 1, 3, 89, 90);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (47, 215, 18, 91, 92, 1, 3, 91, 92);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (48, 216, 18, 93, 94, 1, 3, 93, 94);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (49, 217, 18, 95, 96, 1, 3, 95, 96);
insert into values of v (RN, ID, PARENT_ID, TREE_LFT, TREE_RGT, CBI, LVL, TL, TR) (50, 240, 18, 97, 98, 1, 3, 97, 98);

Hi Greg,.

It looks like you use the defined nested data model.

See solutions mentioned above:

https://community.Oracle.com/thread/2603314 (last post)

https://community.Oracle.com/message/12468999#12468999

How do I know the admin for weblogic server port

I have Oracle Weblogic server installed on my Windows 7 machine. I want to know if the server is running and which is the port of admin for him. Can someone guide me?

the default is 7001. If the weblogic administration console is accessible by http://localhost:7001 / console

If weblogic is installed you will have weblogic home i.e. middleware... you can check that... These are all default values and can change according to the approx... but usually these things by default.

Illustrator: 'nodes' on the corners of the images or shapes are red instead of open boxes & Icannot resize these elements by dragging the nodes. I just got the latest version of Illustrator and it worked fine for a few weeks and now I can't do it aga

Illustrator: 'nodes' on the corners of the images or shapes are red instead of open boxes & Icannot resize these elements by dragging the nodes. I just got the latest version of Illustrator and it worked fine for a few weeks and now I can't do it again on the right.

View > Show bounding solve?

Change password Admin for the Horizon

I'm trying to change password admin for vCenter server to the horizon. I added the new account in vCenter, but everytime when I'm changing the vCenter server settings, I get the following message: due to a bad user name or password.
I don't know I'm using the correct user name and password.
Anyone had the same questions and know how to solve?
Thank you in advance,
Serge

Try to add it like this: domain\user

CLI admin for nodes of the ise

Similar Questions

Other attributes

Maybe you are looking for