Error code 2103 on silverlight, have tried to restore, installed latest version and I tried a few suggestions from microsoft but nothing.__HELP!
Tried almost all and no response on the silverlight player! I don't have a phone I can solve this online? I have windows 7, I made a few changes on the eve of the problem, but I had watched a movie hrs before the code2103 error came, I did a system restore, just in case it was any change that I did but as said that I watched a movie the next day after these changes. What can I do?
I suggest you post your question in the silverlight forum.
Thank you, and in what concerns:
Visit our Microsoft answers feedback Forum and let us know what you think.
I. Suuresh Kumar - Microsoft technical support.
Tags: Windows
Similar Questions
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: get error code 80070424. Tried a solution on the internet but nothing has worked so far. Can you help me please. I just bought my laptop a few months ago.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi sophroy83,
I know the edition of the operating system that you are using?
This problem can occur if a Windows Update or Microsoft Update required service is not registered. To ensure that the necessary services are available and running, as follows:
1. click on Start, type services.msc in the Search text box, and then click services.msc in the list programs. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
2. double-click on Background Intelligent Transfer Service.
3. If the starting state lists Stopped, click Start , and then click OK.
4. double-click on Windows Update.
5. If the starting state lists Stopped, click Start , and then click OK.
6. double-click on my computer.
7. If the starting state lists Stopped, click Start , and then click OK.
8. close the Services window and try to install the updates again.
In addition, please see the thread below to discuss a question similar to yours.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/6310619e-38DD-450C-9bd2-a44f186c8091
Hope this information helped you.
Concerning
Arona - Microsoft technical support engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Cannot download SP2. I have sp1
The 0x800f0900 error code represents an error of parser internal XML (CBS_E_XML_PARSER_FAILURE).
Method 1: Run (Checksur.exe) system update readiness tool
Description of the update of the system for Windows Vista tool
http://support.Microsoft.com/kb/947821Method 2: Close or disable any applications that may be running, restart the computer
Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system.
During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:
1.
Close all applications and restart your computer.
2.
Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
one.
Right-click the icon of the third-party program.
b.
Click Close, disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
3.
As soon as you close the antivirus or the antispyware software, try restarting the computer.
4.
After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.
1. close all applications and restart your computer.
2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
a. right-click on the icon of the third-party program.
b. click Close, Disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
3. as soon as you close the antivirus or the antispyware software, try restarting the computer.
4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.Method 3: Install the stand-alone package for the service pack for Vista
Learn how to install Windows Vista Service Pack 2 (SP2)
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx (includes a link to download the SP2)Information about Service Pack 2 for Windows Vista and Windows Server 2008
http://support.Microsoft.com/kb/9484651.
Close all applications and restart your computer.
2.
Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
one.
Right-click the icon of the third-party program.
b.
Click Close, disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
3.
As soon as you close the antivirus or the antispyware software, try restarting the computer.
4.
After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.
1.
Close all applications and restart your computer.
2.
Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
one.
Right-click the icon of the third-party program.
b.
Click Close, disable, output or an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
3.
As soon as you close the antivirus or the antispyware software, try restarting the computer.
4.
After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.
TaurArian [MVP] 2005-2010 - Update Services
-
need help with this update have recently worm and trojon attack computer required to update the security update, please help.
Hi l keenan,
You can try to uncheck and recheck the option of .net framework and install the update.
a. Click Start, and click Control Panel.
b. navigate to the program and features.
c. scroll to the bottom for the Microsoft.Net Framework.
d. uncheck the option for .net framework
e. restart the computer.
After the computer restarts, repeat the steps above and check the option for .net framework and restart the computer.
Also read the following article:
Error code '0x8007066A' when you use Microsoft Update or Windows Update Web site to install .net Framework updates
http://support.Microsoft.com/kb/2507641/
After completing the steps above, try to download the update to the article below and install it.
MS11-028: Description of the update of security for .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: April 12, 2011
http://support.Microsoft.com/kb/2446708
Hope this information is useful.
-
Hello
My IPAD is stuck in recovery mode and it will not update or restore in ITunes (error 27)
You have tried: get help with iOS update and restore errors - Apple Support ?
but it is possible that your iPad has a hardware problem, in which case contact Apple using the link on this page
-
whenever I try to access google, + it said I did not update to Firefox version and I have the latest version 5.0.1
WordPress also gives me the same message
Reset your user agent. Check out the Web sites or modules incorrectly report incompatible browser
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You must update some plug-ins:
- Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
-
Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.
I tried Mr. Fixit, and I still keep getting the same message again and again... It was working fine, less then a month ago.
Hello
19 code means there is a driver conflict such as two devices attempt to use the same resources.
Please make all underneath the same if you've done it before as it's often the total of the process which
solves
the question.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.Normally the above will solve this problem if not work your way down through them, even if you
done before.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsSome DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.--------------------------------------------------------------------------------------
You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I had to find my computer OEM conditions. I have a copy of the Adobe CS5 student version. It is sufficient for my needs. Only, I reloaded CS5 and tried to get the basis for program updates. They have downloaded, but then they not have installed. I would like to install these updates of Basic. I have valid licenses for the product. Please help if you can.
Try direct updates
-
The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem
Hello
Look in Control Panel - updates of Windows to see what is the KB and post it here. You can indeed
There no need and do a right click on it and HIDE it. Let us know what is the update, so that we can
help advise.Also, if you don't need it you can try to download it here.
Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR
If you need to fix the error:
Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH
Or - these two (above and below must be the same)
Windows Update Error 80070002
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002Fix Error 80070002 when using Windows Update in Vista
http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
If necessary, you can get free reports of incidents:
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC
Hi, Grizzly7659,
Follow the instructions given by Taurian & guenoun
-
I got the error code 0 x 8040154 while trying to synchronize my phone mobile gallaxy S3
I got the error code 0 x 8040154 while trying to synchronize my phone mobile gallaxy S3 to outlook using Samsung Kies SW. What can I do?
Go to Samsung support.
-
Silverlight will not install on my computer. I get an error code 659. Silverlight has worked on computer at the same time. Vista in Home Office business management. Can someone help me with this issue? I installed Vista service pack 2.
johncoxcpa,
Well looking at the log you've posted, I came across this article:
MSI (s) (2 c: D4) [22:29:29:073]: sequence number number for this installation system restore.
This installation is forbidden by system policy. Contact your system administrator.
c:\c17e5b6672c37d9f685b\Silverlight.msiSo it seems that if your system has a software restriction policy installs. You need to contact your IT Department. to learn about the changes to the policy will be to install Silverlight.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
in windows update, I can't download kb2833941 error code ox643! I have windows xp!
in windows xp, I can't download kb2833941 error code ox643! I have windows xp!
If anyone can help?
First try this...
Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.
If this does not fix it try this...
Uninstall the .NET Framework 1.1.
Reinstall .NET Framework 1.1
Download and install. NET Framework 1.1 Service Pack 1
Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941I would like to know what method worked for you.
-
Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has left a couple of weeks of work. Anyone have an idea how I can get it working again?
Hi Sunday47,
There are many causes of Code 39 errors:
· A required device driver is missing.
· A required binary file is corrupted.
· There is a problem with the file I/O process.
· A driver that refers to an entry point in another binary file cannot load.
I suggest you try the following steps:
Step 1: Run the fixit available in the link below
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060
If the problem persists,
Step 2: Uninstall and reinstall the drivers.1. click on start and then click Control Panel.
2. click on system and Maintenance, click System, and then click Device Manager.
Note If Control Panel is in Classic view, double-click System and then click on Device Manager.
3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
5. When you are prompted to confirm that you want to remove the device, click OK.
6. restart the computer.
After the computer restarts, the drivers will be installed automatically.
Click here for more information.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Anyone know what the error code 43 while he was trying to install DC Pro?
Anyone know what the error code 43 while he was trying to install DC Pro?
You download Acrobat app from the direct link or download manager?
For example:
Download Adobe Acrobat products. Standard, Pro | DC, XI, X
If possible after the screenshot of error.
Maybe you are looking for
-
Printer lost access to internet when the router has been changed
My HP Photosmart Plus is connected wireless to my macbook air and has worked well for years. Our company has a wired connection, enter into a linksys/cisco router and it gives access wireless via an SSID on my mac and your printer. A few months ago,
-
I got two updates a root certificate update and the second was certificate root (September 2009). A latest update, but the update continues to come for the certificate root update.
-
While a hp ink printerwon can't print
printer recognizes the printer is ready, but will not complete the task, how can I find out why?
-
game sees not graphics (xps 27, GT 750 M)
I just got this 27 XPS all in one. I tried to run the program of final fantasy on this topic reference, but the program does not see my graphics card and is only allowing me to run it using the edge HD 4600. I tried to use the nvidia Control Panel
-
Problem restarting Windows explore!
So my problem is when im trying to look for something in my computer for example, I get a window with the warning or whether, this is called: windows Explorer crashed and after that: windows Explorer restarts.I already tried a virus scan and orders c