Click and drag the work for a few seconds then the work stoppages?

Similar Questions

• When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go of the mouse button and try to select more it goes to Negative (-) and removes all selections I made and won't allow me not one

  When I choose my quick selection tool, I click and drag the first time, and he adds (my selection). BUT if I let go the mouse button and try to select it goes to Negative (-) and removes all the selections I made and not will not let me add again. I never had this problem before, you usually need to hold down the Alt (or Option MAC) to subtract from selections. No one knows what happened or how to fix this problem, maybe a setting I accidentally hit? Thanks for your suggestions! :))

  Look at the options of quick selection - particularly the four icons on the left.

• Cannot left click and drag the clip in the timeline... Need advice

  Cannot left click and drag the clip in the timeline or drag autour clips in the timeline.

  Can be inserted into the timeline of the Source window, but cannot drag from the source window.

  Can cut and paste into the timeline.

  Cs5 restarting does not help, but restarting solves the problem for a while.

  Tried several mice, but that did not help.

  Have no idea how I got the name of FORMER PRO, must have been drinking champagne years, because I'm a blundering by excellence!
  

  Post edited by: old pro

  Problem solved by pressing the ESC key.

  Someone suggested that in order to heal the same problem in MS Word.

  Problem reappears and solves the ESC key.

  And now my life is complete!

• I click and drag the music from my library to a new playlist and some songs are dark and will not play on my device.  Why?

  I click and drag the music a new reading list, but some songs are not highlighted in the play list and will not play on my device.  Why?

  Try two things...

  (1) the songs greyed out can be unchecked. Uncheck the songs are normally excluded from track to track synchronization and normal. With the help of the songs or the list view Ctrl + click on an empty box to check all the boxes in the list of active reading.

  (2) try to go to file > library > Update music library to iCloud and do the update.

• First PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears.

  Install the 30 day trial version, but first PRO CC 2014 closes after the launch, it happens after the selection / creation of a new project, the main interface is displayed for a few seconds, then everything disappears. How to fix?

  Hello

  Go to c: program files * 86:common: adobe: sl hide, rename the cache sl

  Go to c: program data: adobe: store sl: rename the store sl sl old store.

  Right click on first pro and run as admin.

  Thank you

  Arjun

• When I use HDMI to connect my macbook to the TV - it lights for a few seconds, then disappears?

  When I use HDMI to connect my macbook to the TV - it lights for a few seconds, then disappears?

  I tried all 4 HDMI ports

  my computer is 2013 macbook pro retina - tv is a 1 year old samsung

  Try this support article > use your TV as a monitor

  If you have an Apple TV, you can use AirPlay to the screen of your Mac on the TV via HDMI.

• Satellite P200-140 - Toshiba Logo appears for a few seconds, then disappears

  I have a problem simular with a P200-140.

  When he starts the Toshiba Logo appears for a few seconds, then disappears, if I tilt the screen I can see that the image is there but the screen does not light.

  I used my projector SVGA output and which works very well. Sometimes after having started a few times the display returns and will then work fine but disappear again without warning especially if yiou closes the screen.

  I don't know if it's maybe a switch problem?
  Y at - it a contact microphone that could stick when you close the lid?

  I tried deleting and reinstalling display drivers and booting in safe mode, neither makes the difference.

  Hi Mortiss,
  Maybe the backlight of the lcd screen went... (I don't think)
  or broken wires... (!)
  or the lid switch is defectiv (rare)

  ask a servicepartner to help...

  deassemble unity... or watch this will kill your warranty...

• My computer lag / freezes for a few seconds then starts to work again and get pop ups, I have never before.

  For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.

  Thanks, Elsie

  Hello

  What the popup say or lead?

  Search for malware, and then run the cleaning as described below.

  --------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I add the "open a new tab" button back to tabs &amp; bookmarks to the menu bar? I was able to click and drag the bookmarks there and the tab button has always been thr

  How can I add the "open a new tab" plus button back to tabs & bookmarks to the menu bar? I was able to click on and drag the bookmarks and folders containing the bookmarks in the menu bookmark to a bar of tools and click the tab + button was always on the right side of a tab before seeing ff 13.0.1 on windows 7.

  I need back, areas have red around em

  http://i48.Tinypic.com/25gue0x.jpg

  Draggin ' bookmarks toolbar items, it's done. Thank you for the mind can.

• not by clicking and dragging the mouse

  My mouse pointer responds well to move around the screen and double check etc. However when I try to click and drag he 'loses' of the object (file name or Freecell card) or will not select what I go & drag. All the drivers are up to date. I removed, waited and then replaced the Bluetooth USB mount to the back of the computer and the batteries are charged. Any ideas?

  HP TouchSmart 520-1010ukH

  Mouse Microsoft MG-0982 model

  Windows 7

  Hello @itsmagicvi,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with your Microsoft Mouse on your home PC HP TouchSmart 520-1085uk not allowing you click and drag or use drag to select. I'd be happy to help you, but first of all, I encourage you to post what operating system you are using. And if your 32-bit OS or 64 bits like this that I can give you accurate information.
  
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Another thing you can try is the mouse on another computer to see if you encounter the same problem or if you are unable to do this test using a different mouse on your computer to see if the problem repeats.

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

  Original title: help - csvhost.exe and problems to start

  My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

  Any ideas or advice?

  replied in the other thread

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

• Click and drag the question (Beginner)

  Hello, so I have a very simple program where I would like the user to be able to drag the object to the statue and place it on a pedestal. I started with the click and drag, but the code did not work when I used it. I tried to use the code snippets of live code, and that no longer works. After a trace in the click function, I found that he has not been called. They are called the same, and the mouse_up function was working properly, then I don't know what the problem is. Any help would be greatly appreciated ~

  Here is the code, the important bits are in bold. I don't get any other error ~.

  package

  {

  import flash.display. *;

  import flash.events. *;

  flash.ui import. *;

  try public class extends flash.display.MovieClip

  {

  var rightIsPressed:Boolean = false;

  public void retry()

  {

  Add listeners to drag

  trace ("it's working");

  make the invisible instructions

  controlText.alpha = 0;

  call event listeners

  nextBtn.addEventListener (MouseEvent.CLICK, seeManga);

  startBtn.addEventListener (MouseEvent.CLICK, beginManga);

  controlText.addEventListener (MouseEvent.MOUSE_OVER, showText);

  controlText.addEventListener (MouseEvent.MOUSE_OUT, hideText);

  walkinganimation.addEventListener (Event.ENTER_FRAME, fl_MoveInDirectionOfKey_3);

  stage.addEventListener (KeyboardEvent.KEY_DOWN, fl_SetKeyPressed_3);

  stage.addEventListener (KeyboardEvent.KEY_UP, fl_UnsetKeyPressed_3);

  statue.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag);

  statue.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop);

  }

  function fl_ClickToDrag(event:MouseEvent)

  {

  var object = (event.currentTarget);

  object.startDrag ();

  }

  function fl_ReleaseToDrop(event:MouseEvent)

  {

  var object = (event.currentTarget ;)

  object.stopDrag ();

  }

  start the functions

  function showText(event:MouseEvent)

  {

  trace ("mouse in");

  controlText.alpha = 1;

  }

  function hideText(event:MouseEvent)

  {

  trace ("mouse over");

  controlText.alpha = 0;

  }

  function beginManga(event:MouseEvent)

  {

  gotoAndStop (2);

  }

  function seeManga(event:MouseEvent)

  {

  trace ("2nd button");

  nextFrame();

  }

  function fl_MoveInDirectionOfKey_3(event:Event)

  {

  If (rightIsPressed)

  {

  trace ("keyboard pressed');

  walkinganimation.gotoAndStop (2);

  Foreground.x-= 3.5;

  Text1.x-= 2;

  Text2.x-= 2;

  Text3.x-= 2;

  Text4.x-= 2;

  Pedastal.x-= 3.0;

  statue.x = 3.0;

  }

  }

  function fl_SetKeyPressed_3(event:KeyboardEvent):void

  {

  switch (event.keyCode)

  {

  case Keyboard.RIGHT:

  {

  rightIsPressed = true;

  break;

  }

  }

  }

  function fl_UnsetKeyPressed_3(event:KeyboardEvent):void

  {

  switch (event.keyCode)

  {

  case Keyboard.RIGHT:

  {

  rightIsPressed = false;

  walkinganimation.gotoAndStop (1);

  break;

  }

  }

  }

  }

  }

  Initially, you said that you don't get other errors, but you get the error messages at all?

  How you implement this class file in your Flash file?

  You happen to have anything that could block access to the object of the statue?

  To animate the object of the statue in place such that it is not named in frames before the framework where your code is trying to work with her?

• Click and drag the feature does not

  MY click and drag feature in Photoshop elements does not work when you use pot, brush, Eraser, etc. How can I fix it?

  Does PES 12 on Yosemite? If so, see:

  Photoshop Elements unresponsive after upgrading from Mac OS to Yosemite

• Click and drag the shape tool creates multiple instances (w / photos)

  When I click on and drag a shape tool, illustartor creates multiple instances of the object, such as a card when you earn solitare.

  No idea what could cause this?

  

  

  Is your tilde ~ key down, or you have any plug ins installed that may be corrupt you system?

• Click and drag the interactive feature?

  Hello

  I was wondering if there was an interactive and drag in inDesign CS6 DPS and if yes how to do it.

  Im trying to do a simple ipad app that allows users to drag images around the screen and put them in groups or sequences. It should allow users to move freely around the screen images.

  Any help or advice would be amazing.

  Some examples of code in Appliness:

  http://ContentViewer.Adobe.com/s/DPS%20Tips/7f80a0ffed3a4ff08734bc905aac4a29/HTML/08c_drag _drop.html