Click Global action?

Similar Questions

• Global Action-add entities from within the entity list

  Hi laurent,.

  I came to a scenario in our requirement where I want to add, or perform an action without any object of this type in the list.

  as in the same way in vCenter Clusters list create a cluster cluster list by providing a button or icon to add a new cluster.

  Please see screenshot below:

  Are there any available Extension point to add this icon above datagrid (columnsetcontainer). ?

  or if not how can we can add?

  Please provide some details of the sample there is no SDK sample for the mentioned usecase.

  

  so in the screen above, there is no Cluster object and user can able to click on create action.

  How to put their icon to reach such a feature. ?

  Thanks in advance.

  This question was asked several times here.  SDK 5.1 does not offer a way to add a global action on the list toolbar, SDK 5.5 fixed that, see the example for chassis-ui.

• How to make a global action

  I have a "home" button, which takes the timeline to 1, and you have to work anywhere in the timeline panel. After you create the action, however, it only works in the framework in which it was created.

  Is there a way to tell him to apply the action to all executives, or even to make global action?

  OK, so I persevered - something to do with the layer, I think... created a new layer just for the button and it works. Thanks for your help Rob.

• Odd popup/after-setup windows named 'Hidden Start v2.1' as soon as windows loaded without a single click or action - hacked already?

  As soon as Windows loaded without further action or simple click, 3 popup/after-setup windows (all the same) named 'Hidden Start v2.1' (with some unknown ads) appeared. And they observed above all other applications.

  In any case, I was able to move to the sides and finally closed the.

  Although nothing (so far), is that my computer has been hacked already?

  Hello LeafPomelo,

  You can do a search in the registry for Hstart and see if you can find and remove from the registry.
  Go to the search box start. Type Regedit.

  If you get a guest user account control, click Ok.
  Click on edit in the menu bar.
  Select search.
  In the look for box, type Hstart, and then click the next button.
  It will show you the research register.
  If it finds all entries, you can delete the key.
  The executable file is hstart.exe.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk...

  NTWindows is the manufacturer of the software and have forums you can ask questions about Hidden Start.

  http://www.NTWind.com/software/hstart.html

  http://www.NTWind.com/Forum/

  I hope this helps.

  Marilyn

• Cannot listen to mouse click or action in the Menu?

  I have a Menu inside a menu without MenuItems bar, and I am unable to set the Action for what he... I tried these approaches without success
  

  mnu.setOnAction

  mnu.addEventHandler(MouseEvent

  Impossible to use

  mnu.showingProperty().addListener(new ChangeListener 

  as this Menu has no MenuItem
  
  
  Any ideas?

  Hello. The menu control works as expected.
  If the menu does not contain menu items, you can use Menu.setGraphic (node);

   public void start(Stage primaryStage) {
  
          MenuBar menuBar = new MenuBar();
  
          Text hp = new Text("File");
          hp.setFill(Color.WHITE);
          Menu menu1 = new Menu();
          menu1.setGraphic(hp);
  
          hp.setOnMouseClicked(new EventHandler() {
              @Override
              public void handle(MouseEvent event) {
                  System.out.println("Menu clicked");
              }
          });
  
          final Menu menu2 = new Menu("Options");
          final Menu menu3 = new Menu("Help");
          menuBar.getMenus().addAll(menu1, menu2, menu3);
  
          StackPane root = new StackPane();
          root.getChildren().add(menuBar);
  
          Scene scene = new Scene(root, 300, 250);
  
          primaryStage.setScene(scene);
          primaryStage.show();
      }
  

  Or you can use a toolbar instead of a menu bar:

          ToolBar toolBar = new ToolBar() ;
          final Button menu1 = new Button("File");
          final Button menu2 = new Button("Options");
          final Button menu3 = new Button("Help");
          toolBar.getItems().addAll(menu1, menu2, menu3);
  

• BUMP: Single click against Action Double click does not

  Hi, having a problem with actions on the symbols. THIS IS a REPOST, hoping someone can help!

  I have symbols that when you click on play to a specific place on the timeline.

  LLE first symbol uses simple click (how I want)

  The rest of the symbols also use single click, but when I test the animation they need, double-click (even if they are coded to be single click)

  Any ideas?

  Here is a test for the animation site:

  http://www.contentx.com/DSU_discovery/MainAnim.html

  Ideally, I want a simple click on the symbols. Double click is confusing.

  Thank you!

  Zack

  Hi, Zack-

  Marie nailed without even looking at the project.    You call play() on a place that has a trigger that says stop().  The reason why he plays the second time is quite complicated and has to do with the behavior of play() by default when there is a trigger, but the easiest thing to do is to add one to your click event of the timecode.

  For example: Presentation.click currently says:

  SYM. Play (22000);

  Just replace it with:

  SYM. Play (22001);

  The next best thing to do is to change your call of game to use the optional 'false' parameter to force him to run not the trigger at 2200.

  SYM. Play (22000, false);

  http://www.Adobe.com/devnet-docs/edgeanimate/API/current/index.html#SymbolInstance

  -Scroll down to 'play' to learn more about the API

  Hope that helps!

  -Elaine

• How can I attach a picture file to an e-mail. Whenever I click, the action opens just the file instead of attaching it to the email.

  I try to attach a file of pictures to send to friends by e-mail.  Can someone help me please?

  First of all, make sure that the entire file does not exceed the limit set by your mail server. Check first with them over the limit.

  Suugestion only:
  Could a right click on the file > Send to > compressed (zipped) folder.
  Now, attach the file zipped e-mail.
  P.S. I think that you should always check with the size of the zipped folder.

• There is a second question on the same subject. I want to create several drags in every drop. Trolling, I give group names. Step 3: run the line drops. Step 4: click object actions step 5: uncheck everything except the name of a group. It works for groups

  I hope that someone will answer this. I want to create a drag and drop.  Each drop contains several answers of drag. I drag the Group and give them a Type name. I initial drops. I go to the actions of the object. I uncheck "accept all the ' I uncheck everything except the group I want to go to this decline.  When I preview, two drops accept three choices that they are supposed to accept. But firstly whatever I try, accepts only one possibility and allows others to bounce.  I also have a reset button that I can't find.  I spent hours and hours of work on this.

  !@

  I have it.  When you go to uncheck all choices except the group you want, you must also change the number. Even if the train is in a group, the County still consider them individually

• Action of VMS to block host or network

  We use to monitor the IP Monitoring Center security 2.1 addresses. VMS SecMon 2.1, there is an action to block a host or a network by right clicking on the host affending.

  According to the documentation for secmon viewer "blocking a host causes a sensor to block all traffic from the source IP address associated with the selected event.» Similarly, blocking a network causes the sensor to block all traffic from the network that contains the source IP address of the selected event. Blocking is done through a properly configured Cisco router. »

  Ref: http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/mon_sec/secmon20/ug/ch04.htm#wp322382

  We have installed an inline IPS using a pair of vlan.

  I would like to be able to refuse an attacker online manually by clicking an action of VMS SecMon but when I use the blocking action, that the host is always allowed. It seems that this action cannot run that by setting up a blocking device. that is a Cisco ios router or a pix. This statement is correct?

  Is it possible the console of VMS for telling the IPS to refuse an attacker host or network by ordering manually to make in the same way the blocking is done?

  The action will work by setting up a blocking device.

• Unable to create the shortcut, or Action to Reset encompassing

  Hello

  I use Adobe Illustrator CC (2015.3.0) 20.0.0 32-bit and I'm unable to set up a custom keyboard shortcut or an action to 'Reset Bounding Box' (there's no shortcut to it by default). My OS is Windows 7 Professional (SP1).
  

  PROBLEM of KEYBOARD SHORTCUT: I entered Ctrl + M (which is not used) in my custom keyboard shortcuts next to "Reset Bounding Box" and then I clicked 'Ok', but when I tried the shortcut on an object, it did nothing. I also tried Ctrl-F2, and that no longer works. Displays the shortcut in my keyboard shortcuts custom next to the menu command, and I use my custom keyboard shortcuts because that's what shows when I go in Edition > keyboard shortcuts. I closed out of HERE and reopened again and it still does not work. And I restarted my computer too... still no joy. However, I was able to put in place a shortcut for an another menu command and it worked, so I can do so, but encompassing reset not working not only with the shortcut.
  

  QUESTION of ACTION: I then tried to set up as an Action using SHIFT + F11 (which is not used) and who does not work either. To save the action, I clicked on object > transform > reset the rectangle enclosing. It appears in my Actions Panel under folder my Actions, I already had in place, but there is no whirl down the arrow next to him (not sure if there should be?), and it nothing happens when I do SHIFT + F11 or click the action in the Panel with my selected object. I know that I do everything correctly, as I put in place the other actions, no problem and they all work very well.

  Are some commands to menu, such as the bounding box of reset, simply not programmed to be able to implement the custom shortcuts or actions for them?

  Use the Menu insert an element to strengthen your action.

• Download multiple documents by a simple click

  If I have multiple records in my table and each record refers to the document which can be downloaded on click listener action/action, it can be downloaded. But my use case, that I have to download all documents by a simple click, how can it be done... for example to download all facilities... Please help me.

  You can use this example to browse your VO: http://adfcodebits.blogspot.com/2010/04/bit-4-iterating-view-object-using.html

  And then combine this with a few examples of creating file zip in java, some examples:

  Create file from multiple files with ZipOutputStream zip | Examples of Java Code Geeks

  How to create zip file in Servlet by download? Examples of Java

  Dario

• Actions of the buttons

  Hello, anyone might be kind enough to point me to a tutorial on how to add the chronology of the actions to a button. I just Flash and can't seem to find out how to do this in Animate. Thanks in advance.

  A Flash animation IS .

  http://blogs.Adobe.com/animate/welcome-Adobe-animate-CC-a-new-era-for-Flash-Professional/

  In any case, just click the <> actions button on the Panel to bring up the code snippets panel, which has examples of this.

• Clickbox Action opens URL in the preview, not when I publish?

  Hi all

  I created a project in Adobe Captivate 5.5 which consists of three slides. Two slides accompanied by boxes click with action "open URL". When I saw the Web from Captivate, URL links work browser project, (although slowly...) When I click on them, they open the URL.

  When I publish the project to a folder on my computer four files copy: .htm, .swf, skin and standard.js .swf. When I open the project in a mouse and web browser click areas, they do nothing.

  I don't understand. Hints would be appreciated.

  Thanks in advance for any ideas,

  -Leslie Everett

  Probably you produce output SWF. This means whether you are viewing via Flash Player.

  Unless you plan to copy the output to each individual computer, don't sweat it. Flash Player blocking the way. Once you download on a web server and view it from there, things should work correctly.

  See you soon... Rick

• Action installation of CS3 problem * help *.

  Hi guys - my computer did an update last night and when I went to use Photoshop today, all my actions have disappeared. They were mostly those that I created & I managed to do it again. I ended up being able to find a recorded version of my actions, although it lacked a certain what I made last month, that sucks. WHAT - I had an action that I used, which was purchased. I can't find the file BUT when I click it for import into Photoshop I get a "could not complete your request because of a program error' help please. I tried to click other actions of long ago, and nothing will not install in the action menu * seriously frustrated *.

  When you create and change the action you should always record the action game they are in one of you have folders for guard duty.  You won't ever so your current problem.  If you have a returned in return system, you can recover most of your actions from you, the Photoshop preferences file backup user id 'Actions Palette.psp.

• Panel in Illustrator enhanced Action?

  Hi all!

  I work as a designer and use actions more in addition to automate my workflow in illustrator and Photoshop.

  I need to find a way to better organize these actions in the Panel, because I can't spend my life scrolling up and down to find what I'm looking for action. There must be a plug-in or integrated procedure to help me organize these actions, by theme, perhaps, maybe dividing the Panel in several of them?

  So if anyone knows of such a tool, please share, I would be grateful

  Thank you all!

  (1) you can create action games, by clicking on the icon of the file bit at the bottom of the Panel. Then drag the measures you want in each set.

  (2) you can display the sign in button Mode, and then when you resize the Panel, the buttons are organized into columns. When the Panel is * not * mode button, double-click Action to change its color for easier visual reference.

  (3) I would recommend assigning keyboard shortcuts to the action, you use most frequently, however, if you don't even have to use the control panel to access. Double-click the Action and assign it a function key.