HP slim line s5-1114: Mother board s5-1114
I just replaced the motherboard with even one and can get power over her. ??? I don't know what to do know? Help, please
Kingdjp39, welcome to the forum.
The best thing to do is to check to make sure that all connections are carried out correctly. Here is a presentation of the motherboard:
Figure: page layout
Also, here is a list of the internal connectors:
1 x ATX power connector
- 1 x ATX CPU power connector
Tags: HP Desktops
Similar Questions
-
How can I remove cover HP Pavilion Slim Line s5000 series
How can I remove the cover of HP Pavilion Slim Line s5000 series model s5650z pc? I really need help with that.
Thank you
Hello:
Although I can't help you with first-hand experience, here is the link to the service manual that provides this information.
-
HP Pavilion Elite e9120y PC with mother board M2N78 - LA.
I have a HP Pavilion Elite e9120y PC with mother board M2N78 - LA. When it is turned on, it goes to the initial power of HP on screen (ESC, F10, F11 & F9) and stays there. The only time where could I get F10. He showed no boot device. What is a motherboard completely dead? Is there a similar replacement that will not affect installed licensed software?
PhilmoIBM,
There are several revisions of the Council M2n78 - LA. (like LasVegasWireMan) would testify. What is happening is the NVidia chip controller fails. You said "the only time I could get F10. She showed no boot device. " That really explains it. Your motherboard is bad.
I worked to create the list, but it never gets done.
This series of motherboard has been installed in many different models of HP computers. There are problems.
http://h30434.www3.hp.com/t5/Desktop-Hardware/m8530f-desktop-PC-with-a-m2n78-la-mother-board-doesn-t-see/m-p/181716#M13661 if you read through the pages 30 + you find mention of your unit.
Here are the models reported with the guidance of M2N78LA failed. This is not the complete list.
a4316f, e9140f, p5210y, p6130y, p6142p, p6157c, p6210y, p6214c, p6310y, p6320y, a6720y, m8530f, m9120y, m9350f, m9517c, m9530f, m9840sc
-
my name is kamal sabre
E-mail: * e-mail address is removed from the privacy *.
twmf6 fx4kv jqfjd 9m8vc xxq74
OEM:-00144-194-133-477 00144-194-133-477-04657
my key does not work... I have change my mother board giga v 31 to 41 v
Can you help me?my name is kamal sabre
Email: Email removed for protection of personal information
twmf6 fx4kv jqfjd 9m8vc xxq74
OEM:-00144-194-133-477 00144-194-133-477-04657
my key does not work... I have change my mother board giga v 31 to 41 v
Can you help me?Hey Saber kamal
If you have an oem license, you are not supposed to change your motherboard unless you do together with your computer manufacturer
oem license is linked to the original equipment installed on
Walter, the time zone traveller
-
USB Slot/header on mother board-area 51
So I upgraded to the Corsair H80i V2 in my area 51 R2, everything is fine except that I can't find the USB slot on my motherboard for the H80i plug. Area 51 doesn't have a slot on the motherboard? If this is the case can someone tell where his establishment. Thanks a bunch!
It qwite simply does not have a
Without knowing if it works or not, you can try to share his unique 2.0 header--> header can power two devices: one device in one row from the top down, where the front o FIO Board is considered to be "two devices" or occupies both the top & bottom line
on the left, Corsair Link = 1 device usb cable >< right, 2="" of="" those="" can="" plug="" into a="" usb="">
-
HP Pavilion DV7 laptop: mother board &; cpu compatability
I think to change the processor in my laptop Pavilion DV7 it ha a HP 516292-001 motherboard. # High school is 7G09A1 TFC date is 2009-01-09 I want to know if an I7 processor is compatible, or what cpu would be compatible.
Fatima can a CPU of the laptop upgraded, but it seems that canbe card mother especially. Here's what I found on CPU support:
Supported CPU: Intel Core 2 Quad Q9100, Q9000 -
Read/write on a single line with 6518 IO Board
Hello
I'm trying to control inputs (line 16) and the output (line 16) a card NI6518 with visual C++.
To do this, I want to read line by line. I tried the following code, but what does'nt seems to work.
I wrote a class with below method: ReadLine and writing. Perhaps, I get confused with the sense/line output, uInt8...Can someone explain to me my error? Thank you very much!
READ ENTRY:
bool CTORInterface::ReadLine (int number, bool & value) number 0 to 7
{
HTask TaskHandle = NULL;
CString szNameBoard = "IOBOARD1".
CString szLineID;
szLineID.Format ("IOBOARD1/port0/line%d", number); channel with 1 lineretrieve the handle on the task
DAQmxCreateTask ("IOBOARD1", &hTask);)create an input line
DAQmxCreateDIChan(hTask,szLineID,"",DAQmx_Val_ChanPerLine);Start the task
DAQmxStartTask (hTask);reading
uInt8 data [8];
Int32, read, bytesPerSamp;
DAQmxReadDigitalLines(hTask,1,10.0,DAQmx_Val_ChanPerLine,data,8,&read,&bytesPerSamp,);stop the task
DAQmxStopTask (hTask);opening handle
DAQmxClearTask (hTask);value of multiple bits of data extraction
value = (bool) data [number];Returns true;
}WRITE OUTPUT
bool CTORInterface::WriteLine (int number, Boolean value)
{HTask TaskHandle = NULL;
CString szNameBoard = "IOBOARD1".
CString szLineID;
szLineID.Format ("IOBOARD1/port2/line%d", number); channel with 1 lineretrieve the handle on the task
DAQmxCreateTask(szNameBoard,&hTask);)create the output line
DAQmxCreateDOChan(hTask,szLineID,"",DAQmx_Val_ChanPerLine);Start the task
DAQmxStartTask (hTask);write the value online
uInt8 data [1];
Int32 numWritten = 0, regenMode;
uInt32 bytesPerChan;
data [1] = value? 1:0;
DAQmxWriteDigitalLines(hTask,1,1,10.0,DAQmx_Val_ChanPerLine,data,&numWritten,0);stop the task
DAQmxStopTask (hTask);release of the handle
DAQmxClearTask (hTask);Returns true;
}
-
Hello
No problems with one of my desktop windows 7 but have some questions and concerns. Outside my thin line, I have 2 other computers hp windows 7. They are p6510T CTO Desk Top clubhouse and Pavilion HPE H8m Desk Top. I created my own set of recovery for each computer cd. When I created the recovery discs, I don't remember if my computer came with service pack 1 preinstalled by buying them directly at Hp. My first question is this. Do plant purchased hp computers come with service pack 1 already preinstalled.
Next question. If they do and the recovery discs that I burned for each service pack 1 image, too, be burned on the disks. Finally. Is there a limit to the way in which many times can I use my recovery by computer disks.
You place your order of recovery disks is not possible that they are discontinued. I also undertand after reloading windows I can load the service pack 1 back when running a windows update. But it is easier to have service pack 1 already imaged on any set of recovery disks. If some can please please point this out. Thank you.
If you create recovery discs when you got the computers, you can use them as many times as you want as long as they continue to work. SP1 would not be included. I don't think that they were not in what you received initially. They come through Windows Update, see the center of update and the Service Pack
http://Windows.Microsoft.com/en-us/Windows/service-packs-Download#sptabs=Win7
The recovery disc for the p6510t are available at the surgeons of the computer if necessary:
The model s52060f turns out to be incorrect, please confirm. The number of HPE H8m is incomplete, shall be read as
HPE H8m K8300 for example.
Maybe you should look at the backup to hard disk image using something like Macrium reflect free. Check it out:
-
I can't find the specs for this motherboard, it shows me a wth only 2 slots DIMM board and mine has 4, please help
Hi cali559guy,
Try this site:
http://support.HP.com/us-en/document/bph07557
It has the specs and other info on the N1996.
I work on behalf of HP.
-
Intel LGA2011-v3 (processor i7 - 5820K) mother board
I'm building a new system (the children have taken over my pc) and thinking of using a processor i7 - 5820 K Intel LGA2011-v3 and associated DDR4 memory. I think the "ASUS X 99 - DELUXE" or "MSI XPower AC LGA 2011-v3 X99S". I do not think that it comes from a performance perspective (please inform if I'm wrong), however, I wonder if anyone has any experience with the latter. I did research on the internet, and there is not a lot of direct comparisons, that I could find. I currently use the MSI big bang 1366 X-Power and I have no problems with it so MSI has been good for me. Finally, I mainly use Premiere Pro CS6 and edit my 1080 p videos and burn on blu - ray.
Thanks for any idea.
just to throw this out there, but using cs6 do 1080 p doesn't have the power that the new 2011 v3 brings to the table. so, if cost is a concern I would just get a ddr3 memory and x 79 and you will always be able to change like a champ. But if you want to future proof of your purchase and go with 2011-v3, I'd buy whichever is cheaper. CS6 and 1080 p will not perform significantly different on each Board (or one of the 99 Tips besides x).
-
Adding column which gives the serial number for each line in the Bulletin Board
I use the update version 2 Jdev 11 g.
I'm the filling of all employees from the emp table ADF table.
My requirement is to add a column more as the first column and header line which displays the serial number for each serial number of row.the is not available in the table emp in database .i want to generate it dynamically when the data are filled in to ADF table.i don't want not to use the method to get the SQL query rownum. I want to get custom code (in the Managed Bean) or set all of the properties in the subject entity or any other object.
Published by: sj0609 on September 8, 2009 09:43Hello
Give an id to the table (say 'currRow') varStatus property. Add a column to the table (for example with a text output), then set it to the value of the output text #{currRow.index}.
Arun-
-
HP Pavilion 500-424: Mother Board, PSU, CPU Upgrade
Hello
I was wondering if I can upgrade the motherboard and the PSU and CPU
Here is the link for the plug of the pc http://support.hp.com/us-en/document/c04453602
and if you can him so connect the motherboard and PSU suggested if I can improve
Hello
If you replace the motherboard then you will not be able to use the existing Windows 8 OEM operating system.
I suggest that consider you a new PC.
-
Memphis B-mother Board's SATA ports
I'm a 700-310xt system with a motherboard of Memphis b which is equipped with 5 SATA connectors. I currently have 2 internal hard drives and internal optical drive. I should any problem by adding a 3rd internal HD and a second optical drive internal.
Hello @KB41,
I understand that you are looking to add a third hard drive and a second drive to your home PC HP ENVY 700-310xt. As it is a computer CTO, you had options when choosing the power so delivery I providing information for you to keep in mind. When you install a graphics card, everyone knows that it needs to keep in mind the power as it consumes a lot of power, but other devices consume energy as well and I would recommend that if you want to add additional hardware to your computer that you keep in mind power requirements. As you do not add a graphics card at this moment that I advise you to make sure you have about 100-150 watts above what your graphics card need right now for the additional hardware and keep in mind if you don't ever upgrade the graphics card.
Otherwise, I can't anticipate every question will be who you add hardware that currently you're curious about.
I hope this helps. Have a great day and thanks for posting your question on the Forums of HP. Have a great day!
-
Acer Aspire 5541 G mother board replacement
Hello
I want to replace the faulty motherboard of my motherboard model number Aspire5541G , I downloaded the photos...
Please if anyone knows how to get the exact card for my laptop and where him find... will be much appreciated
Thank youTHE - 5992P = MB. PBY02.001 see here:
That said, it's new with or without original packaging.
You can also search MB. PBY02.001
-
Touchpad on mother board cable.
Hi all
I'm trying to find the product number for a replacement sheet that connects the main touchpad on my TM2 to the motherboard. My only current is damaged and the touchpad no longer works. The current Ribbon is about five inches long and has six copper cores.
Does anyone know how I can find the product number or where I can buy a replacement from?
My system is a Touchsmart TM2t 1100.
Thank you very much
Tm2t 1100 - i5 430
8 GB RAM
HARD DRIVE 500 GB
Windows 7 Home Premium
I'm trying to find the product number for a replacement sheet that connects the main touchpad on my TM2 to the motherboard. My only current is damaged and the touchpad no longer works. It has current Ribbon is about five inches long and has six copper cores.
Dear designmike289,
This generic 6-pin Cable of eBay must adapt, currently sells $12.99 / 2pcs. It is slightly longer than the original cable, but otherwise is a functionally equivalent replacement and is the same cable I used to fix my touchpad TM2t-2200. The seller is international, so it may take some time to arrive.
-Guppeh
If you find this solution helpful, please consider marking it as 'Solution' or adding a Kudos.
Maybe you are looking for
-
How can I disable the word bar in messaging? Before the os10 update I could just slide it upward to get rid of him?
-
Paged zoomed in cannot get to zoom out
I was in my email account when my screen zooms in. I held down the left CTRL key I think but do not know what other key I touch me. It was a few key at the bottom right of the keyboard. Help, please. Blessings, Patrick S. Patton E-mail address is
-
Ethernet controller driver compaq 100-100ed
Hello I bought a compaq 100-100ed with windows desktop computer 8, for one of my friends. There excist on the use of windows 7, so I removed 8 completely. After I installed 7, there is no internet and hp says that there are no drivers for 7? Can some
-
NVIDIA graphics driver has stopped working
Hello When I turn my laptop on it does not completely start upward. I still have to do a startup repair. When I finally arrived on my desk he keeps mentioning a nvidia graphics driver has stopped working. What should I do I have to attend uni and don
-
BlackBerry smartphone Blackberry 8100 does not synchronize. Can anyone help?
I have a Blackberry 8100. He has used to sync without problems via a USB connection on my desktop. I didn't Sync would have for a while. Now when I try to sync, device which is connected (Blackberry and Desktop Manager) shows. The error message I