Click on the boxes stopped working on the project Cap 3
Preview and in the published file, my click boxes no longer work. Used to, but stopped and I'm pulling my hair out trying to make them work again. What happens is I click on them, and action that is supposed to happen does not work. This is true regardless of browser (and, as I have noted, they do not work in the preview either).I have only four who are on the last slide of my project. Two of them are 'Replay' (supposed to go to slide 1) and 'Close' (allows to drag continue at the end of the project where I project designated to close). The other two are the boxes that are set on "send to."
So far, I've recreated them, I created in another project where they work and imported, and I deleted the slide and recreated the slide from scratch.
There seems to be something with the project that makes any box click does not work.
Someone at - it experience with this?
I discovered the source of the problem. I was using a custom preloader. If I use a standard, the problem goes away.
Tags: Adobe Captivate
Similar Questions
-
Click on the boxes stopped working
I'm having a problem with my click boxes. This worked, but stopped. I use version 8.
I have a navigation drag about 4 slides at the beginning. I click on this slide boxes that go to a specific slide. They have stopped working. I tried to recreate the problem and I added a few slides at the end of my project of 35 slides. When I tested a slide at the end of the project, it would jump to the correct slide. In other words, jump slide 36 to slide 38, or 36 slide in slide 39.
Just for fun, I moved 36, my navigation test blade slide, at the front of the project. It has stopped working. Somehow, the click boxes work at the end of the project, but not at the beginning of the project.
Any ideas?
There are only two possibilities (know that sometimes HTML5 navigation did not work properly in 8.0.1 - but you have the same problems to SWF):
- something is wrong with your advanced action, or actions on the other slides
- your project is getting damaged.
For the second case, attempt to copy a new blank project. In CP8 actions come along when you copy the object or slide, they are attached to. personally I would have created action shared, then you are sure that you can reuse them.
-
Search box, stop working
the search next to the address box box does not work. I can go into the options and click on the "search" tab, it will show search
You can check if you have the XML files including Google's default search engine in the browser\searchplugins file in the Firefox program folder.
If this isn't the case, then you need to reinstall Firefox.
Try to delete the file search.json and possible search - metadata.json and search.sqlite files in the profile folder of Firefox to reset the default search engines.
You can use this button to go to the Firefox profile folder currently in use:
- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
Firefox will rebuild the file search.json from the default search engines in the folder "browser\searchplugins" in the Firefox program folder and the searchplugins folder in the Firefox profile folder.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
Do a right click in the Project Explorer is sometimes slow
I have a big project of the AF with a lot of classes and libraries. I only really use these two (lvclass and lvlib) to structure and organize the project. Right click on VI sometimes takes a terribly long time to load, say up to 10 seconds, depending on the library/class. It appears to be vaguely related to how many things the owners have libraries/classes. What exactly is causing this loading time? Any ideas how I could get rid of this significant disadvantage?
Here is more information and a few thoughts:
- Windows 8.1
- LabVIEW 2015 / 32 bit (I can't say for sure, but I think that I had no such problem on earlier versions 2014 and 2013)
- Mass of compilation of all of the project (taken as 2 hours) had no effect
Thanks for all the ideas and resources. I'm very, very happy to announce that this particular fix https://decibel.ni.com/content/docs/DOC-44159 (fix for the issue of AF project provider performance) made my problem disappear. Time has been reduced from ~ 7 sec less than a half second. Wonderful! That, to me, proves false the idea that the mere fact of having hundreds of classes or a large AF would make your current IDE experience terrible.
-
Keyboard stops working after you press caps lock.
On a compaq laptop presario CQ60-300SO the keyboard stops working after you press the caps lock button. The keyboard does not work once the computer starts, but after going in under the keyboard properties control panel and press the 'OK' button, this will work. Buy keyboard works when the computer RECORDS, so I can't get to BIOS. The keyboard work until windows starts and I activate it via the properties of the keyboard by opening the window and press OK immediately. I tried updating the driver but I only find that the keyboard already has the most recent drivers. I tried to restore the drivers and that does not work either. I also disabled start all programs and services to see if it was a problem caused by a program or service and still no luck. It's a very strange problem. I noticed that the keyboard IRQ ranges are both 64-64 and 60-60, which i thought was weird but that's maybe normal. Any advice will be appreciated.
Hello
You did changes to the computer before the show?
Try the suggestions in the link and check if it helps:
Troubleshoot keyboard
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-keyboard-problems
You can also post your query on Compaq support forum:
-
"Realdownloader has stopped working".
Unable to download Youtube and other videos for an update...
Using Windows 7, Firefox 18.0, Realplayer 16.00.282, Realdownloader 1.3.0. In Firefox Realdownloader is activated as displays the button 'disable '.
Youtube videos 'Download this video' button appears, but when you click on "Realdownloader has stopped working-Windows checks for a problem...» "appears. There is no download
For anyone who needs specific steps to solve this problem...
(1) open Realdownloader
2) click on Realdownloader drop-down list at the top left
3) click on Preferences
4) click on browse and select your destination folder -
Create dvd Windows stops working when a video is added
Problem event name: APPCRASH
Application name: DVDMAKER. EXE
Version: 6.0.6002.18005
Application timestamp: 49e02385
Fault Module name: StackHash_1703
Fault Module Version: 0.0.0.0
Fault Module timestamp: 00000000
Exception code: c0000005
Exception offset: 0520bab3
The system version: 6.0.6002.2.2.0.768.3
Locale 1033 ID
Additional information: 1) 1703
(2) 2264db07e74365624c50317d7b856ae9
(3) 1344
(4) 875fa2ef9d2bdca96466e8af55d1ae6e
Whenever I have add the video and even the sample videos, then click on then it stops working... I can't get past this error... Can anyone help?
Hi Nikki2011,
· Do you remember all the recent changes on the computer before the show?
Follow the steps proposed by volunteer J MVP on Monday, April 26, 2010 14:48, link:http://social.answers.microsoft.com/Forums/en-US/vistamedia/thread/35049ee5-2532-494d-8168-9c2f9e5202be
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Eclipse plug-ins: generate ALX file has stopped working
For some reason, the option generate ALX file is no longer works for me.
He used to work, but for some reason any stopped.
Everything is generated (.jar, .jad, .cod, .rapc)
When you choose "Generate ALX file" (after a right click on the project), simply, nothing happens. The plugin does not create the file.
I am at a loss! Why it stop working, and how do I make it work again?
OK solved.
The problem was that the readonly (because of our source control) .classpath file.
Now that I've removed the read-only attribute, generate ALX file works again.
-
Acrobat Pro 2013 Word XI component software plug-in has stopped working
I used Acrobat yesterday no problem... Today, in addition to the Pro Acrobat XI in Word 2013 (Office 365 version of click-to-run) just stopped working.
I tried to uninstall Office and acrobat, reboot, reinstall office and acrobat... download all updates... restart
But now the Acrobat tab appeared in Word again... But all the icons are blank and click on one of them causes Word to freeze. I must kill winword.exe to continue using my computer.
Any ideas?
PDFMaker loads but will not work in Word 2013 - Acrobat XI and DC - Win Pro 8.1
See the link above for the correct fix!
-
Clip/window source moved to 170 individual clips in the project. Advice please?
After copy and pasting of 170 clips individually to a new project to find a corrupted clip, (as when exporting the original file, I was getting the error-50 message), each window source of clip on the initial project evolved, 170 individual clips. (i.e. If I had used the first 2 seconds of a 1 minute clip in the library, it now supports the window to say the second 3rd and 4th, about each element).
He did at the speed of some of the clips and usually put the entire video properly synchronized. It is a video clip with lots of cuts for different things with speeds of tampering.
Can someone shed light on this question at all please? It seems strange to copy and paste everything and then each item changes its source location. Maybe there is a command of lock, I could use?
P.S. I use an old version - iMovie 8.0.6 (don't know what year it is).
Thank you!
Hi redleif,
Thank you for using communities Support from Apple!
I understand that you try to isolate an iMovie for a corrupt video project and you have copied each individual element in a new project. This is a good method for troubleshooting, but there is a different way that I would help you isolate these clips.
First of all, I suggest the project of duplication. Duplicating a creates an exact copy of the project, including transitions. This will prevent you from having to import all individual clips.
To duplicate the project, you can:
- Select the project, and then choose file > duplicate project
- Right click (control click) on the project and choose duplicate project
Once the project has been duplicated, you can begin to isolate the clips to find one that has a problem. The best way to do this is to remove half of the clips and test. Continue to isolate by dividing your groups into halves, until you find the corrupt clip.
Best!
-
Hello
I'm new to OR labview. I'm trying to learn to use it for my project at the College. I am trying to connect labview softmotion mudule and solidworks motion. But I was stuck at the very beginning. When I right click on the project > My Computer > New >, I don't find any option for solidworks Assembly. I know it's a silly to ask question, but please help me. I tried on the computers of other friends, but I'm having the same problem. I use Labview 14, Solidworks 2015 and LabVIEWSoftMotionModule2014f1. It would be a great help if I get to get started. Thank you for your help. What's it's like my labview. There is no option for the solidworks Assembly.
anup2050,
Like most of the LabVIEW modules, SoftMotion only supports the 32-bit version of LabVIEW. You will need to install 32-bit LabVIEW 2014 and then reinstall f1 SoftMotion 2014 to add support.
-
"Reveal to the project" opens a new window
I was wondering if there is a way to run the "reveal in project" command without first opening a new window or a Panel. I would like to have the clip be revealed in the project window, I already opened.
Using Premiere Pro CS6.
The value stores open in Place on the general tab of the preferences.
However, when a bin at a lower level is completely open (double click) in the project window and the clip is in another tray it will open in a separate window.
-
Starting stupid question, where is the context menu for the project?
9 online help tell how make to enable some features in the project view toggle the preview area elements, change the size of thumbnail. The help says:
«Right/ctrl-click the project view, and then select one of the following:...» »
and it shows a screenshot of the menu, I need (http://help.adobe.com/en_US/premiereelements/using/WS5D044C3B-1939-4c8e-BC5A-97D122D4D73F. html).
But no matter where I right click on the project view, I can't this context menu. If I'm on an item in the list, I get a menu with Clipboard functions, interpret the film, etc. No "Thumbnails" option or "views". No menu at all if I right click (or ctrl-click) click anywhere else. I've tried to get this context menu... what in the world I am doing wrong?
Thank you
-Mark
My book offers more detailed advice.
First, go to the window menu and select the option to display docking headers. Then in the upper right of the project Panel, click on the > button.
These options are available through the context menu also, if you right-click on an empty spot on the project Panel, after the list of media clips.
-
Where oh where can I start? When I start the computer, my office is always in the background, but there is a pop up looking for black box thing. There are no long enough for me to read what it says. Something about system/Windows32 (not full title), then past to something else, even once too fast to read, disappears. Then a window that says;
- Online: 223
- Char: 2
- Error: 1% is not not valid Win32 SENSITIVITY
- Code: 0
- URL: file:///C:/Program%20files/PeoplePC/ISP3700/HTA/station.brt
There is an option to run a 'this page with a script' or something to that effect. If I choose Yes or no is not serious.
Under this window is another
"Runtime error!"
Program:C:\ProgramFilesCyberLink\PowerDVDDXL\PDVPDXSrv.exe
Application has requested the execution in an unusual way.
On my sidebar on the right low in McAfee Ms red with white background icons, many of them until I sweep (no click) with the cursor. They will disappear after the scanning, but then return.
When I click on Explorer or the window will Flash quickly on and outside, or should I get the message "Windows Explorer has stopped working".
I can get on explore if I disable all add-ons. But it won't let me check yahoo IND. e-mail messages.
When I try to go to things in the start menu that look like we can help him, I'll either get the error messages or off quick flashes of a window. When I went into Control Panel, nothing happens when I click on the icons.
When I went into the System Configuration. then click on services there are things that say that they are arrested.
In its responses, please explain things as you explain to a 60 year old grandmother.
Hello Halima S,.
Thank you for your response. I was checking things until I found your answer. Do not be alerted via hotmail. Somewhere in my files McAfee "View Log" I found that I was 'ping '. What is crazy? In the files for seven times in a row from 09:30-09:34 "SystemGuards have allowed a moment change on your computer." Should I try to mess with this before that I have use the above tips or try your advice first?
Ping, means that your mcafee dat files are up-to-date and also it cannot be updated no more. so try to update your antivrius manually by downlading latest mcafee dat files and also try runing mcafee!
Take a look at this:
http://community.McAfee.com/message/91863
-
FoxTab 1.4.4 stopped working.all I get is toblue window where the ith my topsites grid use to be.i tried to remove the extension and then re - install but I have the same condition. Someone at - it ideas. Oh yes, there was a windows update this morning
This picked up on the web, don't you remember the poster name but many thanks. Worked for me on all my devices and allows to keep the newer versions of these programs.
Step 1
Open 'my documents '. In the menu select Organization = > folders and Search Options = > tab 'View' = > in the list of parameters in advance make sure that "Show hidden files, folders and drives" is selected. Click on 'Apply' = > 'OK '.
Complete the following procedures, you can go back and reselect him "do not show hidden files, folders or drives.Step 2
Open Firefox = > go to a web page that uses images of Flashplayer = > right click on an image of flashplayer = > select "Global settings" = > "Advanced" tab = > 'Trusted location settings' = > 'Add' = > 'Add folder '.
In browse folders, expand the following path and select the folder 'Profiles' = > click 'OK '.C:\Users\select your own name\AppData\Roaming\Mozilla\Firefox\Profiles of the user
Once done, close the dialog boxes and restart Firefox.
Maybe you are looking for
-
Firefox 23.0.1 restoring tabs from previous session
Hello. After update of FF 23.0.1, I can't restore my last session of the 'story-> Restore", more because the command is dimmed.Currently, I have to work around this problem by opening the tabs automatically at the start of FF.What is strange, this pr
-
Alternative to the HLOOKUP function?
Hello I'm trying to find the heading of column title if a given value is somewhere in a row. HLOOKUP can't be used because it doesen't work with an index of the negative line. Ideas for an alternative? That's what I'm doing: It is a matrix: The heade
-
Android Tablet: cannot close the session (stay signed in)
Hello world I use Skype on a Samsung Galaxy Tab 10.1. My problem: when I sign the application continues to run. As my Tablet stays at home, I stay logged in people think, I'm online, even though I'm actually at work, away from my tablet and they do n
-
Serious problem! Periodic drop in framerate in games because of Windows 7
Hi all I'm having a serious problem after installation of Windows 7 Home premium 64-bit. Initially, I thought that it was due to external cooling fans not working not properly and so went out and bought really powerful Antec fans. But the question co
-
plugged in lg cookie and entered the hard drive on my computer, went to images clicked on an image then shift held clicked on another, supposed to press copy, but accidentally remove in a hurry. Ive tried other programs, but ultimately, I have to sig