Search box, stop working

Similar Questions

• Microsoft Windows Search Indexer stopped working and was closed

  I get this pop-up error message "Microsoft Windows Search Indexer stopped working and was closed" and I can't get rid of it.  I tried to go to control panel, Indexing Options and Reindexing, but that does not solve the problem.  I always get this error message.  Any help would be appreciated.

  Thank you

  DooDoiDaddy

  My first try at a fix would be SFC, then re index again. The error control player would be next.

  1) right-click the icon of the drive in r explores(the application of the computer at startup)

  2) click on properties of
  
  3) click on the Tools tab

  (4) see error checking

  The System File Checker tool

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. click Startand type cmd in the box start the search .

  2 right-click cmd in the programs list and then click run as administrator.

  3. If you are prompted for an administrator password or a confirmation, type your password or click continue

  4. at the command prompt, type the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Mark L. Ferguson MS - MVP

• I recently C clean the computer and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?

  I recently C clean the computer (Vista) and cleared out some unused programs. Now, I get a message starting "search settings stopped working. Is this a problem?

  Thank you

  Hello

  (1) are you facing problems with your computer?
  (2) when exactly the error message is invited?
  I recommend you perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
  You can also run the Microsoft Safety Scanner to make sure that your computer is virus-free.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  I hope this helps!

• Live Search has stopped working

  Since a few days ago Live Search has stopped working on my HP almost nine
  I type in a phrase, the icon 'search' is displayed for a few seconds then this

  502 bad gateway (tab)
  Incorrect gateway
  The proxy server received an invalid response from an upstream server. (on the page)

  I can always search, for example with Altavista.
  I checked the log antivirus Avira, it signals the detection of malicious software a couple of times

  Live Search can be restored? Thanks for reading and I hope someone can help.

  Hi hollybear,

  Try this:

  In your Internet Explorer, go to Tools - Internet Options - connections - Lan settings - uncheck "automatically detect settings".

  See if that helps. If not, come back and we will be happy to help you more.

  Dave Dave D D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Windows Search Indexer stopped working

  I get this same message pop-up (more high title) and whenever I click on - check online for solution; or, close; He leaves the screen and comes right off.  Also, the problem seems to be the problem why my hard drive permanently working and never allows me to perform other tasks.  Whenever I click on something, it takes up to 10 minutes before you complete this task.  All the answers on how to fix this message?

  http://www.online-tech-tips.com/computer-tips/how-to-fix-Microsoft-Windows-Search-Indexer-stopped-working-and-was-closed/

  See if the information above solves the problem for you.

  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/

  And the above can help you to rebuild.

  See you soon.

  Mick Murphy - Microsoft partner

• Google Voice Search has stopped working.

  Search Google text-to-speech has stopped working. When I click on the microphone on the search widget, it evokes a box that says force close. He also does that when I click on voice search in the applications Panel. I went and put the widget in the trash, thinking perhaps that it works if I and put it back on but I can't find it to put it back. So now I can't look at all. Someone please help. Thank you

  No there is no way to reinstall an application pre-loaded, but to do a factory reset.

• Why that I get this message, Microsoft Windows Search Indexer stopped working and was closed

  Why that I get this message, Microsoft Windows Microsoft Windows Search indexing has stopped working and was closed [content] A problem caused the application to stop working correctly. Windows will notify you if a solution is available.

  Original title: he ceases to annoy me

  A problem with the operating system.

  I would also like to run a file system check to verify and repair the operating system files

  Run a file system check to check and repair your system files.

  To do what type cmd in start search box, and then right-click to run as administrator, then
  SFC/SCANNOW

  It may need be performed up to three times before success
  Let us know the results of the report at the end

  Read here for more information
  http://support.Microsoft.com/kb/929833

• Microsoft windows search indexer stopped working and was closed - need help please

  I started getting this message

  Microsoft windows search indexing has stopped working and was closed
  today
  I deleted the files as described in other threads
  I tried to restore the index - which has not worked
  the sfc/scannow gets to 78% and then I get an error log - I can't open the newspaper - I do not have permission
  What should I do?
  my computer came pre-loaded with vista, so I did not install CD

  Hello

  Download and install Windows Search 4.0 and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14850

  Hope this information helps.

• Click on the boxes stopped working

  I'm having a problem with my click boxes. This worked, but stopped. I use version 8.

  I have a navigation drag about 4 slides at the beginning. I click on this slide boxes that go to a specific slide. They have stopped working. I tried to recreate the problem and I added a few slides at the end of my project of 35 slides. When I tested a slide at the end of the project, it would jump to the correct slide. In other words, jump slide 36 to slide 38, or 36 slide in slide 39.

  Just for fun, I moved 36, my navigation test blade slide, at the front of the project. It has stopped working. Somehow, the click boxes work at the end of the project, but not at the beginning of the project.

  Any ideas?

  There are only two possibilities (know that sometimes HTML5 navigation did not work properly in 8.0.1 - but you have the same problems to SWF):

  1. something is wrong with your advanced action, or actions on the other slides
  2. your project is getting damaged.

  For the second case, attempt to copy a new blank project. In CP8 actions come along when you copy the object or slide, they are attached to. personally I would have created action shared, then you are sure that you can reuse them.

• Google search links stopped working

  What is hell? Today, I noticed that the links provided by Google search no longer work. If I click on a link suggested by google search, nothing happens! The same screen is presented. I tested it with Firefox 10 and Firefox 6. Same result. Only the previews of google are available, but the actual source links are not clickable.

  I also tried the same exact search with IE, and I'm sad to say that the problem is not with Google.

  Disable Adblock did not change this anomaly.

  Not sure, but this seems to happen and shuts off when cookies are blocked. It might be that this change was not completely turned upside down in my area. This Add-on seems to help at the moment and also with cookies off.

• Tab 'Search' has stopped working. CHMS

  I maintain several. CHMS for a customer. For some reason I can't understand, the tab "Search" of all. CHM that I've recently updated is no longer works. Any attempt to research translates into "no topics found." I checked that the older versions of. CHMS have tabs to search for work, but everything. CHM that I've updated this year is more equipped with a 'Search' tab. I even took one of the projects of the last year, is made absolutely no changes, recompiled, and voila, search is broken.
  
  I checked that I have all the settings correctly on the Windows Properties dialogue box, as well as all necessary. DLL is correctly installed and registered.
  
  The only change in my setup, it's that I've upgraded to IE7.0 (finally!) earlier this year. And I follow all the updates of Windows. I've been using and continue to use RoboHelp HTML X5.0.2. (I have not upgraded because, in my opinion, it was not worth my $500. I am a independent and stood for a more robust upgrade).
  
  Any ideas? Frankly, I guess that an upgrade of Microsoft has messed up the work and I'm stuck, unless I have spend money...
  
  Nita Beck

  I found the solution, after picking up on an idea from Rick. Although I checked for and found the .dll file Rick mentnioned, I found that I was missing the itcc.dll which is part of the 1.x Microsoft HTML workshop. Once I have recorded this .dll and then recompiled in RoboHelp, the Search tab once more working properly.

• Click on the boxes stopped working on the project Cap 3

  Preview and in the published file, my click boxes no longer work. Used to, but stopped and I'm pulling my hair out trying to make them work again. What happens is I click on them, and action that is supposed to happen does not work. This is true regardless of browser (and, as I have noted, they do not work in the preview either).
  
  I have only four who are on the last slide of my project. Two of them are 'Replay' (supposed to go to slide 1) and 'Close' (allows to drag continue at the end of the project where I project designated to close). The other two are the boxes that are set on "send to."
  
  So far, I've recreated them, I created in another project where they work and imported, and I deleted the slide and recreated the slide from scratch.
  
  There seems to be something with the project that makes any box click does not work.
  
  Someone at - it experience with this?

  I discovered the source of the problem. I was using a custom preloader. If I use a standard, the problem goes away.

• RoboHelp HTML Version 11 and RoboHelp HTML to 2015 - why SEARCH has stopped working

  Have a Robo HTML V11 existing project that has generated hundreds of times successfully. Updated for Robo 2015, copied all project files in a new folder.

  1. Convert the copied project of Robo2015
  2. Generated WebHelp and copied to the server
  3. Continually receive error message when you try to use the SEARCH.
     Receive the following error messages:
     
     Then
     
  4. Cannot clear the error or reset the SEARCH.

  Reinstalled Robo HTML V11

  The original project folder has been opened in RoboHelp HTML V11 and now this project, when generated, no more a work of RESEARCH.

  Tried to delete the whxdata folder in the hope that will regenerate recreate properly, obviously did not work.

  Can someone shed light on this situation and provide a solution. I have updated the online help for the application, but may not post an online help system that doesn't have a SEARCH function works

  I just remembered this thread.

  https://forums.Adobe.com/message/8034185?TSTART=0#8034185

  Worth a try?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• How to make a search box to work?

  I'm a total noob in programming of any operation.  Is there a way to search for a local Site for some words?  Here's what I do.  I'm doing a Html site that contains all the parts and part numbers and patterns for one of our presses.  I have the layout down and much of the information contained in I just need to know how to be able to search without that it is connected to the web.  There will be a local file on our server here.  the server here is a mac mini with no side Server SQL etc... Is this possible?

  Shocker is just.  Google's Internet sites.

  For your Intranet, look of Wrensoft Zoom.

  Zoom website search engine - add search on a website, intranet or CD

  Nancy O.

• at the signing at the office, I get the following message from microsoft windows search indexer stopped working and was closed.

  I don't know what to do I'vedoiter tried to understand some of the fourms but have had a chance. This aftering began do a scan. Any advice would be helpful thank you

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  They will help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner