Click the 'Text' to the editor blocked this one?

Similar Questions

• Installer of Lexmark printer drivers saved in a folder "c:\Program Files \" (with a space at the end of this one!)

  I have a real problem.

  On my Windows 7 Professional machine somehow is an automatic update of installed Lexmark printer drivers and the installation program saved files
  in a folder names "c:\Program Files \" (with a space at the end of this one!)

  This all happened the day after without seeing me what was going on.

  It seems that the Windows 7 system does not like the folder or file names ending in a 'space' or a 'period' and it will not work with it.

  The side effect is that in some sort the system has copied EACH name on this new folder called sub0folder "C:\Program Files-" and I ended up with TWO files that have the air of the same name (even if we have a space at the edn of it ".

  It isn't really a problem in what I could simply ignore it (the other folder names corrrectly operates always OK). The only problem is that changes to 'Security' affect the TWO files because Windows 7 sees the two folder as the 'same' names when setting security.

  That's why, when I tried to mark the 'bogus' as 'not available' folder to everyone (including the system) it is the same for 'Program Files' (the real one) with disastrous consequences. I had the chance to get out and restore some semb; launched sound mind to my machine.

  But I'm stuck now with this annoying issue with many sub-fdolers (which are all unaccessable because the system cannot locate).

  My question is, how to remove a file that has a 'space' as the last part of his name when Windows Explorer cannot work with it?

  Thanks a lot with no matter what helpf with this very unusual problem.

  If you have the opportunity to make a complete picture of the system of the disc, I would before you try the following... just in case remove the "bad" folder ends up deleting all good also.  Alternatively, rather than remove the directory in the last step below, rename it using a command like

  ren c:\PROGRA~3 c:\badprogs {press Enter}

  If program of the 'real' the files and other directories survive unscathed, and then delete the C:\badprogs in the usual way.

  ******************************************

  In the search box, type cmd, then right click on cmd.exe and select "Run as Administrator".  Give the password when you are prompted.

  Type

  CD c:\  {Press Enter}

  to switch to the root

  Now type

  dir /x {press Enter}

  This will show you a list of directories of names "short form".  You will probably see something like this (from a x 64 Win 7 installation, is why there "Progra ~ 1" and "Progra ~ 2" directories ")

  Directory of c:\

  01/08/2012 13:19

  PROGRA ~ 1 Program Files
  30/07/2012 13:03 PROGRA ~ 2 Program Files (x 86)
  03/07/2012 10:46 users
  30/07/2012 20:16 Windows

  In your case, your directory parasite called or PROGRA ~ 3 (if you have x 64) or PROGRA ~ 2 (if you have Windows 7 32 bit).

  Now that you know the name short, which allows to delete:

  del C:\progra~3 {press Enter}

• "We would like to inform that your accοunt expires in 72 hours, it is important to perform a verification of your information from now on, otherwise you accοunt will be closed. Please click the link below"this is an email I received support to itune.

  We would like to inform that your accοunt expires in 72 hours, it is important to perform a verification of your information from now on, otherwise you accοunt will be closed. Please click the link below. This is an email I received support to iTunes and I was wondering if I should do it

  I would not click on any link without further investigation.

  Is the link to an official source of Apple?

  You have a web address or URL of the link that you can post here?

  What happens when you go directly to AppleID or another connection site

  where there is no doubt of the authenticity? • Apple is not usually give

  you a countdown, so I think that the item that you see is a scam.

  PS: If you had a trial subscription to Match iTunes or other item

  You can check personally, or any other service you may already

  charged, the way back to Apple should be a known to ask them.

• WordPerfect X 6 stops working when you submit a document to print. WPX6 works fine on other PC configured the same as this one.

  This problem occurs on one of the workstations Dell 790 10. All the Dells are configured the same, and all have the same version of Wordperfect installed. It's the only workstation that will not print a document WP. MS Office 2010 products have no problem with printing on this machine. We have tried several things to solve the problem - reinstall WP, change compatibility mode, modify the user accounts on this computer, test printing documents of WP on other similar work positions (with no problems), etc. Any advice or assistance would be greatly appreciated. Really, we do not want to rebuild this box.

  Thank you

  Bill

  Hi Bill,

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the steps from the following link:

  000003546 - resolution of the printing problems with WordPerfect®
  http://Corel.force.com/index/articles/en_US/Master_Article/754014-troubleshooting-printing-problems-with-WordPerfect

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  If the problem persists, then I suggest you to post in support of corel.
  http://Corel.force.com/support?lang=en_US

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• my laptop seems to have forgotten the existence of this one sound card, how to fix this?

  It is a dell inspiron 9300

  the WOOD is "phoenix ROM PLUS version 1.10 a04 BIOS" If that helps

  Hi caldaria.

  Welcome to the Microsoft community!

  According to the description, it looks like the sound card is not detected.

  However, we need more information about the issue to sat that you also.

  Please help me to answer these questions:

  1. What is the brand and model of the computer?

  2. What is the brand and model of the sound card?

  3. have you tried to install the latest drivers?

  Here is a link that I think should help you solve this problem.

  Method 1:

  Run the fixit of this link and check:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us?WA=wsignin1.0

  Method 2:

  Try the steps in this link and check:

  No sound in Windows

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Respond us if you have any question with Windows and we will be happy to help.

• I hit the button 'block this computer' by mistake. How to unlock it?

  When I went to shut down my computer last night, I hit the button to "lock" by mistake.

  How to cancel it?

  CTRL + ALT + DELETE and log back?

• Contours of the boxes like this one do not arise. In some forms, they are almost invisible.

  Are there settings I can change to improve the visibility of these boxes?

  Try to activate the 'do the focus rectangle thicker' accessibility. This option makes the rectangle around the currently selected item in the thicker dialog boxes, which makes it easier to see.

  Panel-> Ease of Access Center-> under 'Making your computer easier to use', click on "Make the computer easier to see"-> under "Make the computer easier to see" and "Make things on the screen easier to see," click here to put a brake on the box before "making the focus rectangle thicker. -> Apply-> Save

  I hope I could help

• The site look like a mess in the editor of Business Catalyst

  The look of the site very well on the web and MUSE and preweiw in the browser and it is used to look perfect in the editor of BC

  But today, when I was clicking the button change the appearance of the site "coded" (in every sense, but only in the editor)

  This is how the site is supposed to look (the way it looks everywhere, but in the editor) http://testfek.businesscatalyst.com

  Here's how it looks in the editor

  Anyone know what is happening with this?

  

  Sorry for the late reply!, I see the problem is resolved because I checked the url of the site in Internet Explorer, and it shows the contents of the site do not thin like mentioned in the shared screenshots.

  Thank you

  Sanjit

• Impossible to contact the editor?

  I use pse 5.0 with Vista.

  Whenever I have try to go to quick edit or complete edition, I get "attempt to access invalid address", followed by "unable to connect at the request of the editor" how to solve this problem?  I've uninstalled and reinstalled without good result.

  Since you're running Vista, first check and make sure that you are in an administrator account. Then, right-click of your launch of Photoshop Elements icon and select "run as Administrator". It's sticky... you just have to do it once.

  See if Photoshop Elements works correctly now.

  May be your preference files is corrupted. Corrupt preferences will not be fixed by a uninstall/reinstall as preferences are located outside the program folder.

  Restore files preferably:

  See the step #4 "Re-create the Photoshop Elements preferences files and registry entries" in this document. Steps 1-4... stop when you get to the editing part of the register.

  http://kb2.Adobe.com/CPS/401/kb401340.html

  It works for this poster in this thread. (Note that this poster said to restart the computer).

  http://forums.Adobe.com/thread/362789

  If none of these work, have a look through this thread as there are a number of possible solutions... could be more relevant to the foregoing screw this one is PSE 5 Vista specific.

  http://forums.Adobe.com/thread/432824

  If you have not already, you must download and install the 5.02 patch that makes PSE5 compatible with Vista.

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=3569

• I accidentally ticked the box "Do this automatically for files like this in the future."

  I was downloading a file, when I clicked the box 'do this automatically... ". "When I try to click on the ok button, how can I change this back to the way it was. [ask to open or save]

  Hello

  You can change it back by going to:

  • Tools (or

    

    ) > Options > Applications

  • Highlight the Content Type you want to change it back
  • In the 'Action' column, change always 'ask '.

• Double-click the problem when loading.

  Hi guys.  My site has been updated and brillianty running, but I just noticed something.  I have my navigation at the top of the page bar.  To load things, I do

  var myMovieClip = new contact_mc();
  var myMovieClip2 = new aboutUs_mc();
  var myMovieClip3 = new Join();
  var myMovieClip4 = new ourWork_mc();
  

  And then

  topNav_mc.addEventListener(MouseEvent.CLICK, gotoFunction);
  function gotoFunction(event:MouseEvent):void
  {
  
      for (var i: int=0; i< container_mc.numChildren; i++)
      {
          var child:DisplayObject = container_mc.getChildAt(i);
          container_mc.removeChild(child);
      }
      
      
      if (event.target.name == "about_mc")
      {
          container_mc.addChild(myMovieClip2);
          TweenLite.from(myMovieClip2, 1, {alpha:0, rotation:15});
  
      }
      if (event.target.name == "contact_mc")
      {
          container_mc.addChild(myMovieClip);
          TweenLite.from(myMovieClip, 1, {alpha:0, rotation:15});
      }
  
      if (event.target.name == "join")
      {
          container_mc.addChild(myMovieClip3);
          TweenLite.from(myMovieClip3, 1, {alpha:0, rotation:15});
      }
  
      if (event.target.name == "work_mc")
      {
          container_mc.addChild(myMovieClip4);
          TweenLite.from(myMovieClip4, 1, {alpha:0, rotation:15});
      }
  
  }
  

  As I say, it works fine.  But I accidentally just clicked a button twice quickly and it makes tweening stop at Midway, and the loaded content becomes semi transparent.  Then I tried clicking the button two times one another, and the same thing happened.  It happens when I click twice on a key very fast pace.

  Is there a reason that this could happen, or is there something in my code that I can do to prevent this?

  Thank you very much

  Nick

  One thing you could do is remove the event listener in the service and then add it after that the call of the Tween is completed.

• 2 How to remove an element from the tree and the database block tree?

  Hello
  
  2 How to remove an element from the tree and the database block tree?
  
  Kind regards
  
  Abdetu...

  The problem is caused by not sending forms is not a VALIDATION of the database because he thinks that there is no changes to save.

  Forms does know that changes to the data block, he does not know the changes made by the PLSQL INSERT, UPDATE, DELETE calls and procedure.

  Try to remove the line to block, rather than using a DELETION like that...

  go_block ('INSP_EQUIPMENT_TYPE');if form_success then   do_key ('DELETE_RECORD');end if;
  
  
  

  If you wish to continue using your original DELETE instead of my change above code, you can use different techniques to force forms to issue the COMMIT to the database, including this one...

          DELETE ...        FORMS_DDL ('COMMIT');
  

  Be careful... This will be the VALIDATION of the database, but the changes to the data block will not be sent to the database!

  I posted a few other ways to issue a VALIDATION of forms here
  www.seeristic.com/Forum_Posts/Forms_COMMIT.txt

• Get the perfect in this case curves.

  Hi, try to get a perfect on this form curve, qiute can't seem to get it, I was wondering the best methid that works for you I can apply, I can normally handle the pen but this one has me tool.

  I'm trying to get an aesthetic curve on this form, you will have (talented designers) know exactly what I want to achieve.

  Y at - it a good way cause he has going me in circles (no pun intended).

  I CMD - Y, to outline, then used the line tool then use "A" selection tool, to get out, then conversion of point Director out and curve it.

  God knows that I am lost.

  Can someone help me please?

  

  

  Kanokane,

  I was too slow in publishing, with this addition:

  You can start by removing any other anchor point in the curve with the tool remove a provided anchor point with the pen tool, then deselect and ClickDrag with the direct Selection tool; or redraw with the tool feather on top of what you have.

  The guides and cancel are your friends.

  I'm not sure on the various appearances in two points of view: they look very different, even in size.

  Perhaps there is a clue in the appearance palette, and/or in the layers palette.

• I blocked some photos in facebook by accident, the toddler got click happy. How can I remove this block in some photos?

  I blocked some photos in facebook by accident, the toddler got click happy. How can I remove this block in some photos?

  With Facebook on display, click the button to the site identity (for more details on what is, see https://support.mozilla.com/kb/Site+Identity+Button) and then on more information. This will open the page info dialog box.

  First, select the permissions tab, make sure that 'Load the Images' is set to allow (default selection should work as well)

  Then select the media tab, and then click the first item in the list. Use the down arrow key to scroll the list. If any element has the option 'Images of block of (field name)' selected, deselect the option.

  This should hopefully solve your problem, but see also https://support.mozilla.com/kb/Images+or+animations+do+not+show

  Some add-ons can also block images, for example, if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block images.

• I'm filling out a form that is available on a site. When I click on the option to fill out and submit the form 'online' a pdf document is displayed in chrome with the following text "to display all of the content of this document, you need a later version

  I'm filling out a form that is available on a site. When I click on the option to fill out and submit the form 'online' a pdf document is displayed in chrome with the following text

  «To display all of the content of this document, you need a later version the viewer PDF.» You can upgrade to the latest version of Adobe Reader from www.adobe.com/products/acrobat/readstep2.html for further support, go to www.adobe.com/support/products/acrreader.html"

  Needless to day, I installed the latest version. I even reinstalled using the link in the message, but nothing helped. Whenever I click on the link to go forward, I get the same message. Question: (i) is it my PC/software (Vista), (ii) is the site where I'm trying to submit the form, or (iii) is it the software acrobat reader. Note that I used successfully the last version to fill out and sign forms.

  It is none of them. It's Chrome, which is ignoring Adobe Reader and showing the message.

  Solution: just save the document (with the message) to your desktop. Then open it in Adobe Reader. The 'real' should then display.