clicked automatically

Similar Questions

• Sometimes when I open my computer, then it automatically type something, automatic click, automatically use the shortcut by keyboard.what help me.sometime she also stopped automatically.

  Please help me

  Hello

  1. does this problem occurs when you use a particular program or occurs when you use any program?

  2 have you made any changes to the computer before the show?

  Method 1: Follow these steps and if the problem persists.

  Step 1: Start the computer in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode then, start the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot see the following link.

  http://support.Microsoft.com/kb/929135

   

  Note: when you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest you to run a full system scan on the computer by using the Microsoft Safety Scanner to check if the computer is infected with the virus. You can download and run the Microsoft Safety Scanner from the following link.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• mouse automatically by clicking programs

  my mouse is hovering over a field automatically accept / clicks

  Hello

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• disable the automatic function of left click in Vista

  I bought my gateway computer already loaded with Vista Home Premium.  This version seems to have an auto-click program whereby I let automatically click on what either my mouse flies over.  I often find myself in places if I'm not constantly aware of the position.  I HATE THIS FEATURE (!), but I don't know how to disable it.  I can't find in Windows or the mouse settings or to search them. How can I get rid of auto-cliquer it?

  Hello

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A200-1YX: sometimes Touchpad left click

  My A200 is 20 days. OS is Vista Home OEM.
  From time to time, my left touchpad product clicks, which can be very annoying if I write something.

  I know it's left click, because if I have large text, my cursor appears from time to time in the line where the pointer is at the moment.

  I tried with the uninstall/install Touchpad drivers, but it did not solve my problem.

  Best,
  VJT

  Hey, Dragan

  Please don t be angry with me, but I n t think a touchpad could create left clicks automatically.
  I think that you accidentally hit the surface of the touchpad while typing, and consequently, the cursor put another position.

  Try to disable the touch pad using the FN + F9 key combination and check if it happens again

• I am running XP with Office 2003. The Office 2007 SP1 is "forced" on me to automatic updates. Should I run the installation?

  Whenever I visited the MS Update site, I was prompted to download the SP1 for Office 2007. I always ignored this suggestion because I run Office 2003. I don't know why I would even be asked to provide this update unless I have versions Express in Visual c#, VB, and Developer Web loaded on my computer. These applications need this update? Should I start the update, or I might do something that is not compatible with my Office 2003?

  Thank you

  Then you'll want to hide.

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB936982 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Start
  (Starting the service will take a moment)

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• Whenever I start the computer I lost the wireless capability. I get error WZC "871122". I then start the automatic Wireless Configuration service. Is there something I can do if I can't do it every time that this?

  Continually 871122 WZC error.

  Hi Shane,

  Looks like you have (or had) 3rd party software that previously managed your wireless connections, so casting service windows does not start automatically.

  See the following Article in the Microsoft KB, see if it suits it for you;

  http://support.Microsoft.com/default.aspx/KB/871122

  More precisely:

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. Click Start, click run, type ncpa.cpl and click OK.
  2. Click on network connections.
  3. In network connections, select your wireless connection, and then click change settings of this connection.
  4. On the wireless networks tab, click to select the Use Windows to configure my wireless network checkbox.

  To start the automatic Wireless Configuration service, follow these steps:

  1. Click Start, click run, type %SystemRoot%\system32\services.msc/s, and then click OK.
  2. Double-click Wireless Zero Configuration.
  3. In the list of Startup type , click Automatic, and then click apply.
  4. In the Service status area, click Start, and then click OK.

  Let me know how you go.

• Automatic updates alert not received

  Earlier, I used to get alerts security warnings (next to the volume icon) whenever I turned off my automatic updates, but not these warnings are not received when my automatic updates are disabled, how can I get them again.

  I have Win XP service pack 3

  Go to the Control Panel and double-click the Security Center.  Then, at the bottom of this screen, under "manage security settings for:" click "automatic updates" to open the settings of automatic updates.  Is the option "Notify me but don't automatically download or install their" selected?  If not, select this option, then click on 'apply' and 'OK'.  Restart the machine and let us know if solve you the problem please.

• How to hide updates in xp pro... when I don't right-click theres no option Hide?

  Hi, please help

  Te,

  I. - Stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  II. - remove the contents of the download file:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  III. - Open Internet Explore (only!) to http://windowsupdate.microsoft.com & run a CUSTOM scan. KB9556184 . If you want to deselect/uncheck and hide ("don't show me this update"). -right click it once HIDE

  Tip: If an update of root certificates is listed in updates software optional (in the menu on the left), install it to take full advantage of enhanced Internet Explorer security, but do NOT install any other optional software , nor updates optional hardware , just hide them, too.

  IV. - start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > [OK]
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  UTC/GMT is 18:25 on Wednesday, August 1, 2012

• Info from music CD not download automatically.

  Recently, our Windows Media Center stopped download album CD covers and info of the song.      He also said something on the 'Messenger' being not connected.    Any thoughts or ideas?

  Hello

  1. you remember to make changes to the computer before this problem?

  2. What is the exact message that you receive on the Messenger being not connected?  When exactly do you see that

  Cover of the album, the song info, art images are not displayed for one of the following reasons:

  ·         You are not connected to the Internet, is not possible for Windows Media Center to retrieve the information and cover clip.

  ·         Images and information on the films are not available in your country or region.

  ·         Images and information on the movies are not available for the current movie or DVD.

  ·         When you set up Windows Media Center, you chose not to download CD, DVD and information on films from the Internet.

  If you want to change this setting, follow these steps:

  (a) to ensure that you are connected to the Internet.

  (b) on the start screen, navigate to tasks, click settings, click generaland then click Automatic Download Options.

  (c) select the CD retrieve album art, for movies and the DVD media informationand Internet Services in the Internet box.

  (d) click on Save.

• Why the automatic updates to install the Service Pack 4 (KB2463332) on my computer? I have windows XP

  I have Windows XP Professional version 2002 service pack 3, this computer is on a network, but it is NOT the server. This update hase until now tried to install 24 times, and continues on a daily basis through automatic updates. Initially, I tried several things to actually force the installation until I found a link here, who said that he was only for servers. So, I need two things... If I do not need this update and how to stop it coming as an update critical for my computer? or if it's my computer, how can I install?

  Thank you for your time, Jenny

  KB2463332 is an option, not the security update. Do not hesitate to 'hide '.

  ====================

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck the box/deselect KB2463332 (look in the SOFTWARE OPTIONAL category on the left side) and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Start
  (Starting the service will take a moment)

• How can I activate the automatic updates on if she doesn't let me do this in Control Panel?

  My security alerts Windows says that my automatic updates are disabled. He tells me that I can go to control panel, system, click Automatic updates and click OK. When I return to the Security Center, it always says that the automatic updates are disabled! What can I do?

  Hi Spiffany,

  As mentioned by JoseIbarra, we will need a little more information. You use a computer after SP2? If so, this article may help

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

• When my pointer is placed on ANYTHING it automatically opens the programs or selects things without any rattling, etc. (using Synaptics laptop built in mouse pad)

  I had trouble where my pointer open EVERYTHING when even just hovering, etc.  I tried all the troubleshooting and other settings, I find to try and am no - where.  Anyone out there have any help?  It, sometimes depending on what I'm trying to do, makes it nearly impossible to use this machine.

  Hello

  If a mouse (or if you use a touch screen and a mouse)

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  Control Panel - mouse - look for hover or click Automatic similar settings according to your mouse.

  When a TouchPad

  Look in the Notification area next to the clock for all TouchPad control program.

  Control Panel - mouse - also look for it TouchPad (mine is on the device however settings tab
  other brands and maybe on the other tabs and more than one). There are usually the parameters that
  can determine if a click, double click, hover or can open or close a program.

  Start - computer, or Windows Explorer - Tools - Folder Options - general tab - check the
  Double-click to open an item - APPLY / OK

  If some people are well positioned can change to some other setting if you plan to leave
  them that way and then change again.

  Hope that this help Rob - bicycle - Mark Twain said it is good.