does support wireless dual band (2.4 GHz and 5 GHz) in the hp probook 450 - g2

Similar Questions

• DELL Latitude E6540 supports Intel® Dual Band Wireless-AC 7260?

  Hello

  DELL Latitude E6540 supports Intel® Dual Band Wireless-AC 7260?

  Intel® Dual Band Wireless-AC 7260 Specifications: http://ark.intel.com/products/75439/Intel-Dual-Band-Wireless-AC-7260

  

  Thank you

  Pedro

  Hi, Nice to hear from you. Yes it will work.

• Belkin adapter wireless dual-band 600n

  So, I recently bought a belkin dual-band adapter and I am trying to connect to the internet and it says unidentified network, no internet connection.

  I plugged my old 300n and it works perfectly fine even I tried to plug into together to see if it works fix the other and it just does not connect. You is someone who knows how to solve this problem.

  Hello Slayer,

  Thank you for reaching out to us to the Microsoft Community Forum.

  Normally, any wireless router must have a parameter for which you must go to the configuration menu by going to the web page (for example http://192.168.0.1) via a web browser.  Here, there should be settings for various things, including wireless.  Ensure that the wireless is turned on.

  Who is standing on IT, disable any kind of security as a first step, to make sure that you can at least get wireless to work.  If so, you can connect with your laptop Windows 7, then you should be well set up the wireless with a kind of security (i.e. WEP/WPA) so that when you connect again with the Windows 7 laptop, you need to put a password (only once).

  I also recommend that you download and install the latest drivers for the USB of N600 DB Wireless Dual-Band adapter.

  For more information about how to download and install the latest drivers from the manufacturer's Web site, please see the articles below.

  http://www.Belkin.com/us/support-article?articleNum=4924

  http://www.Belkin.com/us/support-product?PID=01t80000002vzcJAAQ

  Hope the helps of information provided. Let us know in case you need more help.

• Crash computer after installing Netgear N600 Wireless Dual band Router WNDR3400. My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.

  My computer crashes after I installed the Netgear N600 Wireless Dual band Router WNDR3400.   I uninstalled and then reinstalled, but my home computer still crashed.  My detail of error says I may need to update my BIOS to 8400 has 09 but I can't seem to download the desktop to install.  Any suggestion?

  Hi JudyWinn,

  If you need assistance for updating BIOS (Basic Input Output System), I recommend you contact the manufacturer of your computer to update the BIOS (Basic Input Output System) & check if the problem persists.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.
  Please post back and we do know.

• Qosmio x 770-136 dual band wifi 2.4 and 5 ghz - how to switch between them?

  Hi guys,.

  get a double band of new router netgear N900 and it supports multi-5 2.4 ghz wifi,

  My question is how do I set up my qosmio to 5 GHz?

  Thanks for any answers

  Hello

  I think that the laptop supports Atheros 802.11(b/g/n) WB195-HMC WLan card.
  Standard WLan 802.11 B and G is 2.4 GHZ. The standard 802.11 N standard would be operates also in 2.4 Ghz 802.11 A is not supported.

  If your card does not wave the 5 GHz band support

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• Slow speeds of WIRED with N750 Wireless Dual Band Gigabit Router

  This question is about speed WIRED versus wireless speeds.

  This router is used in a situation of Home Office. This office at home connection cable Internet is 500 MB. When one of our computers connects directly to the cable modem we always get 500 MB download speeds. Yet when we connect to this router, these speeds fall into two (on average).

  Often, indeed, speeds will drop equal to or less than 100 MB. Yet whenever we unplug the router and plug directly into the cable modem we return up to 500 MB.

  Suggestions?

  Unfortunately, the LAN ports cannot be fixed by firmware.

  Therefore, it is time to get a new router.

• HP Envy 17 Notebook PC TS: hp envy 17, need a card WiFi dual band for 2.4 and 5 G

  What is the best wifi card for me to upgrade to?

  And is it easy enough for me to do it myself?

  It's my router: ASUS RT-AC87U Wireless-AC2400 Dual Band Gigabit Router

  @rberg51

  Sorry about that I got 3 different pages open and copied a bad for you.

  First would be the.

  Broadcom BCM4352 802.11ac 2 × 2 Wi - Fi + BT Combo Adapter 724935-001 4.0

  Second would be the.

  Intel Dual Band Wireless-AC 3160 802.11ac 1 × 1 WiFi + BT Combo Adapter 710662-001 4.0

  Sorry for the confusion.

  REO

• Cisco NAC does support Wireless LAN?

  Hello

  I know that Cisco NAC support LAN wireless. I sent myself with various brands of autonomous APs. These work very well using the in-band, out-of-band mode.

  However, Cisco has been mentioned for Cisco AP, with Cisco switches and Cisco NAC, out-of-band is supported. I tried this today and it's or Cisco's fake, which is highly unlikely, or I have not configured the portion of the NAC or the access point Cisco correctly, which is most likely? I wonder where am I wrong? Please someone advice me on this?

  Kind regards

  RAM

  + 6012-2918870

  Hi Jean Claude,

  You can now do out-of-band with wireless deployments, but you must have a Wireless Lan Controller manage your APs. You can't do it with autonomous APs.

  The guide below will for most of the configuration:

  http://www.Cisco.com/en/us/products/ps6128/products_configuration_example09186a0080a138cc.shtml

  Thank you

  Nate

• Acer Aspire E1-570 does support RAM dual channel?

  I installed the program CPU - Z and it says that my laptop uses the RAM single-channel mode. Support dual channel mode and how to change mode dual channel?

  Felix_Aliaj,

  I don't see dual channel support listed for the memory of this system.

• My 3000 N200 does support Wireless-N

  Dear all,

  First of all, my apologies if this question has been asked before, I have search the Forum but did not find what I needed. Please do not point to a previous post if you are aware of a response.

  My 300 of Lenovo N200 (0769) is very difficult to connect to my home network. In fact, whenever it comes to suspend I struggle to pick up on the network. I have updated the drivers for the card and verified that Windows XP is unable to fund the card to save energy, but I still struggle with it. So I was thinking to replace my router with a Wireless N one. I was wondering if the forum members were aware that my Lenovo would support a Wireless N card and if so, could anyone recommend a card please?

  Thank you for taking the time to read my post.

  Kind regards

  Johnny.

  
  

• my web cam does'nt work when I talk on Skype and can not see the image

  my web cam "Gigaware" does not work and does not show the photo appellants.

  appellant also cannot see my picture in his Skype screen

  Hi Weeraratne,

  The question is limited to Skype?

  If you are facing the issue with Skype, you must change some settings in Skype itself to solve the problem.

  You can see the links to support Skype and check if that helps.

  How can I solve problems with the video call in Skype for Windows desktop?

  How can I check that my webcam works in the Office of Skype for Windows?

  You can also get in touch with Skype support for assistance.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Professional Windows does not see my hard drive during installation and wants to leave the installer.

  installed the new hard drive in my compaq lap top, started the professional windows installation and stops because it cannot find the hard drive. It is in the bios and has passed the tests. My lap top has only a cd/dvd drive, a floppy drive. Not knowing what to do.

  It is probably because you have a hard drive Serial ATA (SATA) in your computer.  These drives did not exist when Windows XP came out and so no drivers for this type of disc can be found in a regular Windows XP don't install.  Windows makes allowances for that by inviting you to press the "F6" key at the beginning of the installation process, but then you must provide the SATA drivers diskette (no other medium will do).

  "Limited OEM driver support is available with F6 during installation of Windows XP and Windows Server 2003"
    <>http://support.Microsoft.com/kb/314859 >

  There, several articles that explain how to install XP on a SATA drive without needing a disk.  Here are a couple of them:

  "Installing Windows XP with AHCI/RAID F6 of USB drivers only"
    <>http://www.Prime-expert.com/articles/B02/installing-Windows-XP-with-F6-AHCI-RAID-drivers-from-USB-only.php >

  "How to install XP on a SATA HARD drive without a floppy for a laptop drive"
    <>http://www.ehow.com/how_7395338_install-HDD-floppy-drive-notebook.html >

  HTH,
  JW

• Created a dual boot with Windows 7 and Windows XP, but the start of the single will of the Windows XP system. I need to access Windows 7.

  pleasee help me if you are a good person and thanks in advance

  I had istalled windows 7 on c: and after several days, I have installed windows xp on the d: now whenever I start my computer it doesnot ask any option to open the operating system it opens directly windows xp I have very important data 7 please can tell me that how I can create option for the os and the name of windows7 also removed in boot.ini.file I need not use win xp , but I want my Win 7 that only which is installed in c:

  You will need run a Windows 7 Startup Repair.  Please visit: What are the system recovery options in Windows 7?

• Why does mail line take pictures of ther body and plce them to the superior leavind a red xi in a box in the body of the msg?

  When you send an email with photos in the body of the message. The email sent will place the picturesw at the top of the page and the body of the email where the photo was will contain a box with a red x in it

  Hi Sam,

  ·         Are you referring to Windows Live Mail?

  If so, I suggest that you post your question on the Windows Live Solution Center.

  Portal - Messaging Windows Live Solution Center