Satellite 1900 cannot conect directly to the modem via Ethernet cable

Similar Questions

• E2700 cannot connect directly to the modem, but connects via another wifi router?

  I have a Netgear WNDR3700v2 that I was very pleased until I had a nest of thermostat. Apparently it's a router not supported and I had to change it. I bought an E2700 since he took charge, but I have a huge dilemma...

  If I connect the linksys directly to the modem, I don't get an internet connection. I got out and renewed IPs without success...

  But if I wired the linksys for the netgear, I get a good solid internet connection. problem is, I have no need for installation of 2 routers on top of each other...

  any suggestions? I would like to know what kind of information you need.

  Basically, I do not understand why he is not able to connect directly to the modem to linksys. Yet, it becomes solid connection wired through another router.

  I use Comcast and South FL. it is motorola surfboard modem

  OK, found the solution.

  call 1800COMCAST

  go to the problems of the internet, there is an option to send a refresh signal to your modem.

  I did, and it started working. I guess that clears the memory and binds to the new MAC address...

  After that I did, internet is back. I hope this will be useful to someone. I was ready to return the dang thing.

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• Unable to connect to the internet via ethernet cable

  Hello. I'm using acer aspire v5 - 431 and my Internet worked perfectly fine this.morning. now, it detects cable the.ethernet. IM using windows 8 and my laptop is only 9 months old. WiFi works perfectly.
  Ive restarted the computer laptop, disconnected, did the flushdns doesn't seem to work at.all. pls help! I'm desperate!

  Found the problem... it seems that it is a problem with my cable LAN/VGA port combo...
  Have to buy a new one! so, for now ill stick with wifi! (T_T)

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• Trouble with iMac connecting directly to the modem

  I have an AirPort Extreme, provision of a wifi network in my house. It is connected to a modem Concast Cisco DPC3941T model.

  I planned to connect my iMac (retina 5 k, 27 "running 10.11.3) directly to the modem and not use wifi to connect to the Internet.  I plugged a bolt of lightning for the Ethernet card in and ran a cord to the Cisco modem, but the iMac doesn't recognize this connection.

  Network preferences says "Thunderbolt Ethernet has an assigned IP address and won't be able to connect to the Internet."  Sorry, don't know what that means.

  The reason behind the try it is that my wifi signal is de-energized intermittently and I can't understand why. So I thought that if I plugged the iMac directly I could avoid the abandonment wifi issues.

  Thanks in advance for your suggestions.

  You have removed the Airport Extreme?

  If you connect the computer directly into the modem, the ethernet indicator lights on the router. It is essential for the ethernet work.

  Using an ethernet cable, you bought? If it's super long they can give trouble... a short cable should be fine.

  If you are not sure the little light on the AE plug the computer by ethernet in the extreme with a cord short... lights... If so, you can plug the cord of the cisco to another port ethernet on EI and make sure it works too.

  Network preferences says "Thunderbolt Ethernet has an assigned IP address and won't be able to connect to the Internet."  Sorry, don't know what that means.

  Ethernet is not connected or DHCP does not work. If the modem has been bridged it won't work, unless you turn off the modem for about 20 min. Then launch new follow-up to the computer.

• ISA550 Wan speeds VS direct to the modem

  Today, I noticed that if I connect my computer directly to the modem, I get speeds of 67MBPS down and 3.5 upward. When I go through the ISA550 I get 47 down and 3.5 upward. Is - fixable?

  Hello

  Your speeds are most likely more slow because of running security services your CEP.

  I took a quick look at the Datasheet for the ISA550 and the flow when the different threat management features are enabled is listed to 45Mbps, right around what you have found.

  As a test of cross and disable the security services one at a time to refine that slows you down, my guess would be the A / V or IPS.

  Is repairable way, using just the firewall, the device can handle up to 200Mbps, but that means you would need to disable certain functions for security.

  Hope that helps and thanks for using Cisco,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

  Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

  Hi Sailortdt,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it looks like you are facing a problem with network connectivity.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Unable to connect to the internet without Ethernet cable.

  I have a new router, but can't seem to connect to the internet without Ethernet cable. Trouble Shooter diagnostic tells me that "Windows cannot communicate with the device or resource (primary DNS server). I am at a total loss!

  Not sure, but this post can help (as seems to be the same or a related problem) - http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-communicate-with-primary-dns-server/9043f785-2f4e-4cc1-adf5-6ba5ca413749?page=1&tm=1388597381623

  Good reading and see if it helps.

• Unable to connect to the internet via ethernet.

  Unable to connect to the internet via ethernet.

  You have published a statement... is not an issue. You have a question?

  Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

• My photosmart c309g-m is connected to the router by ethernet cable. Can I add?

  My photosmart c309g-m is connected to the router by ethernet cable.  Can I still add to e-print?

  Hello

  Is a printer ready ePrint? You can use the home router to access the internet? If Yes and Yes, then you should be able to do.

  Kind regards.

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• Satellite L500-1WG - how to use the modem internal?

  I am new to computers and laptops and that you just bought the Toshiba Satellite L500-1WG. I was told, in the shop, he has an internal modem?

  What should I do to activiate/get connected to the internet? Do I need an external modem wired or wireless as well? No difficult language or abbreviations please, I am a total novice with very limited on this subject knowledge. Have only to learn how to start and run the basic set up.

  HEY buddy,

  > Told me, in the shop, he has an internal modem?
  It seems that this shop doesn't know what they are selling or they wanted kid a small round little

  It turns out satellite L500 is not equipped with modem and it doesn t have a modem (RJ12) port.

  So if you want to use the modem connection, you must purchase an external. But for now he s not advised to use a modem, the majority of the pages are not designed for modem more.

• Satellite A60: Unable to connect to the internet via a modem - no dial-up

  In my Satellite A60, WinXP Home, when I try to connect to the Internet via the modem of Toshiba, I get error 6: handle not valid, and after a few attempts, I get error 50: all devices connected / request not supported.

  Device Manager / network / card Asynchronous RAS displays an error (black exclamation point on a yellow background).
  The driver is asyncmac.sys = MS Access Remote network serial driver.

  I have:
  -tried to uninstall the RAS asynchronous card, but no luck, didn't say it may be necessary to start
  -modem uninstalled / reinstalled
  -update of Windows XP through windows update
  -update of the bios / modem / network drivers from Toshiba

  No luck, the RAS asynchronous card error is still there.

  Any suggestion?
  Thank you
  Alessio - Italy

  I think that this problem is Windows XP and map Asynchronous RAS, not the modem.
  The modem correctly composed the number, negotiates the user and the password, and then I get error 6 and 50.
  On the internet I found this tip for uninstalling and reinstalling the RAS asynchronous card:
  http://forums.practicallynetworked.com/showthread.php?t=6781
  I followed the instructions and run RArepair.exe.
  It uninstalls and reinstalls the map Asynchronous RAS, but RAS is still in error (the yellow field in the Device Manager).