Client access in the VLAN with Any Connect

Similar Questions

• I can't access the internet with any browser without proxyfire

  I can't access the internet with any browser, without proxyfire software & internet option checked to see if the proxy server is marked or not. I think I checked everything I know now I will be honerd if someone help me with this problem.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message?

  3. what version of Internet Explorer is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter, and check.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Method 3:

  Try the following steps to turn off the Proxy connection and check if it works.

  Follow the steps to disable the proxy:

  a. open internet explorer.

  b. click on tools and then click Internet Options.

  c. click on the Connections tab, then click LAN settings.

  d. turn off the server to use a Proxy.

  e. click on apply then Ok to save the changes.

  Hope the information is useful.

• VZW iPhone is unlocked? Means it can be used with a SIM card, anywhere in the world with any other SIM card from another provider, including the United States

  VZW iPhone is unlocked?

  Means it can be used anywhere in the world with any other SIM card from another provider, including in the USA?

  Yes, only bought it for full price directly from Apple.

  Buy from anywhere else or under contract with Verizon means that he will probably be locked.

• Typing a wrong URL in the URL from Firefox 31.0 bar redirects me to us.yhs4 yahoo com search that displays the LAVASOFT logo. It is not the case with any of my

  Typing a wrong URL in the URL from Firefox 31.0 bar redirects me to us.yhs4 yahoo com search that displays the LAVASOFT logo. It is not the case with any of my other browsers (IE, Chrome, Opera, Safari). So this cannot be a problem ISP as shown in all current references to Firefox.
  This problem started after I uninstalled adaware from LAVASOFT. It itself instead of uninstall. Thus, it is malware behavior while LAVASOFT is pretending to protect against malware.
  Nevertheless, I would like to know how to get rid of this annoying 404 redirect hijack. My home page is about to startpage com, my default search engine is startpage com, all references to Lavasoft and adaware have been removed by subject: config and Windows registry...
  How to get rid of this spam redirect, please?

  Click Tools > Options, then general tab

  In the home page box, type the url you want to fire fox opens by default when you start the browser.

  KhalidXpert

• Error while using any tool in Photoshop "could not use tool the___ ("fill in the blank with any tool") because the channel of the target is hidden".

  I'm working in Photoshop CC, but when I try to use the tools I get this message:

  "Could not use the___ tool ("fill the void with any tool ") because the target channel is hidden."

  Why I get this message? I haven't hidden all channels.

  Anyone know?

  Thank you.

  Hi snow,

  See this thread: 'Could not move tool use because the channel of the target is hidden'

  Kind regards

  Claes

• VPN clients cannot access to the vlan

  Hello

  I just changed my flat lan to a virtual LAN environment multi, but now I need help to get to my VPN back working again as the VPN user can access servers that are not on the vlan 'door '.  I've read enough to know that it is probably associated with NAT, but I'm not sure where to put this information.

  Does go in the NAT, associated with the E0 interface (outgoing internet gateway), to the vlan10 (vlan router is actually on) or can I create a new one and apply it to the crypto ipsec and isakmp side of things that use VPN users?

  My network is configured as such...

  VPN client - Router1811 - split trunk - C3550 - 12G - shared - resources multiple C3550s - servers/Wstns

  The router subnet 192.168.10.0 as all switches, VLAN is set up through the 12 G and all other switches as vtp "vtp clients", including the router.  The user can get to the 10 subnet and any server on it, but not to the"farm" on the subnet 192.168.11.0.

  I noticed Federico has been working on something very similar to this... but any help would be appreciated.

  Thank you, Don

  Hi Don,

  Please mark this discussion as resolved if there is no other problem with this VPN.

  See you soon,.

  Nash.

• Installation of VM with VPN client access to the network local provents

  What is the best approach for the connection to the VPN in the following scenario?

  We want to install VM for our projects as VPN client networking (using the cisco vpn client). In many cases the VPN profile that is configured by the client is configured to prevent access to the local network, but rather the tunnels all through the VPN.

  I tried the NAT and Bridged networks and once you connect to the VPN client, the conectitivy of the virtual machine is limited to the VMWare console. SSH and other connections no longer work.

  Thanks for any idea.

  I'd VNC - that's what I use for a VM XP that uses the client VPN SecuRemote CheckPoint blocking the same way (wisely) off incoming traffic when the connection is made to the other end of the VPN.

  Just paste lines similar to the following in your .vmx file when the virtual machine is shut down:

  RemoteDisplay.vnc.enabled = TRUE
  RemoteDisplay.vnc.port = '5910 '.
  RemoteDisplay.vnc.password = 'somepassword '.
  RemoteDisplay.vnc.keymap = 'uk '.

  Note that you point your VNC client software on the IP address (and port of your .vmx file) to your server 2.0, not the virtual machine host. Use a different port for each computer virtual you need simultaneous to access.

• Control access to the network with ACS device

  Hi all!

  I currently have in place an Appliance, Cisco Secure ACS using Windows as main server authentication. Cisco Secure acts as a GANYMEDE server +. I have two groups defined in Cisco Secure: Netadmins and security ITD. Users of the Netadmins group need access to all switches and routers on the network. ITD security must only access async line 53 on a router 2611 for a band of a firewall and no other access to all network devices offline. How can I limit access to the Cisco Secure security ITD group to line 53 only?

  My current config on this router is:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  connection ITDSEC authentication group Ganymede + line of AAA.

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  line 53

  No exec

  authentication of the connection ITDSEC

  transport of entry all

  StopBits 1

  Speed 115200

  line vty 0 4

  exec-timeout 30 0

  login timeout 120 response

  login authentication netadmins

  but users in the ITD security can still access by vty and then reverse telnet to any asynchronous line on the router. In addition, security ITD always access any switch or router using telnet: what should be my setup on these devices? I do an ACS configuration?

  All other devices:

  AAA new-model

  AAA authentication login netadmins group Ganymede + line

  RADIUS-server host 10.30.X.X

  RADIUS-server host 10.18.X.X

  key radius-server XXXXXXX

  Line con 0

  password 7 141C015C5806

  login authentication netadmins

  line vty 0 4

  password 7 11020A 524310

  login authentication netadmins

  line vty 5 15

  password 7 11020A 524310

  login authentication netadmins

  Any help will be greatly appreciated.

  Hello

  In the security group, I would create a Restriction of access to IP network with an entry permit. Essentially to allow access to the single port on 2611 only.

  The AAA Client field is the name that you gave to the 2611 in the network config. Address will be * unless you want to restrict access to the ip or address. Port... never quite sure with async if the port value must be "async 53" or "line 53".

  If you look in the pass/fail for the nas-port attribute, you'll see what that T + sends to the ACS. This should help you know what to put in the NAR.

  Mounira

• Vpn client access to the DMZ host

  I'm having a problem where my customers who establish a VPN with Pix 515 cannot access hosts on the DMZ. VPN clients can access hosts inside network without any problems. I discovered that when I make a route to trace from a client computer that has established a VPN connection to a host on the DMZ, he tries to go through the default gateway of computers instead of the client from cisco. Any ideas?

  More information:

  When a client connects with the PIX over the VPN, it is given the internal DNS servers and the DNS Server internal, we have a host entry that says "www.whatever.com" 2.2.2.2 (this is the DMZ host). Customers within the network can access this host with problems, it's just the customers who establish a VPN connection. But the VPN Clients can access "www.whatever.com" using the public ip address. The problem is that if remove us the entry from the host on the DNS server so that the name of "www.whatever.com" decides the public ip address customers inside will not be able to access the DMZ host. The names and IP numbers are not real just using those as an example.

  Any help would be apperciated. Thank you

  You'll currently have something like this in your config file:

  sheep allowed ip access-list

  NAT (inside) 0 access-list sheep

  This tells the PIX not to NAT any traffic from inside interface, which is to go to a VPN client. You need the same thing but for the DMZ interface, then add the following:

  sheep allowed ip access-list

  NAT 0 access-list sheep (dmz)

  Who should you get.

• Access to the web IS good connection type for daily use?

  Our society has made more than a hundred win2000 desktop VMs and use of thin clients to connect these virtual machines via the web access method,

  which is very low cost that VMware view. However, I wonder that web access is a right for this connection of the virtual machines to the scale. something unstable

  to get to this type of connection?

  It is not a good idea because:

  There is a limit of simultaneous connection to access the web and it's a little less than 100

  the user is required to login to webaccess, select the right virtual machine and open the console. then connect you to windows... it's just too many steps.

  and much more

  I suggest you activate remote desktop or VNC in each of desktop computers. Fixed IP address in each virtual desktops

  in your workstation, create a connection profile Auto connect (for fixed ip address) when you start upward with the user name and password registered. so all when someone reboot the workstation, a connection will be restored automatically.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Configure the vlan with SG 300 - 10 p and 520 SA

  Hi all

  Forgive my ignorance, but I need help with the basic configuration.

  For a small office, I bought an appliance of security SA520 (for future VPN with another remote desktop) and a switch of SG 300 - 10 p to connect 3 PCs and 3 IP PHONE. The SA 520 is the router. I have to configure 2 VLANS on the switch:

  VLAN2: DATA (for PC)

  VLAN3: VOICE (for IP PHONE)

  VLAN1: BY DEFAULT.

  How can I configure simply all ports?

  I would like to configure ports 1-4 on 5 to 8 ports and VLAN2, VLAN3 and G10 port is reserved for the SA520 router.

  I want to split VOICE and DATA network.

  I think I need to create a trunk on G10 to SA520...

  Can someone help me?

  Hi Julien,

  OK sounds like you use it vlan by default for network management and the vlan 2 for vlan3 for voice and data.

  I use a calculator for this, my SA520 is ready at the present time.

  Step 1   On the SA520 add vlan 2 and vlan 3 and label them voice and data respectively.

  

  Step 2. Allows you to use the switch port 4 on the SA520 as a port to shared resources to the SG-300.

  (my intent is to use vlan1 not tagged vlan tagged 2 and vlan tagged 3 on the uplink of the switch and the SA500.)

  To do this, I have to say the SA520 port 4 of the switch will be in trunking and not access mode.

  

  You will need to check the membership of vlan 2 and vlan 3 on switch port 4.

  Step 3.  Now add a few IPS to VLAN2 and VLAN3

  Step 4.  Create DHCP scopes if that is what is needed on the SA520

  

  So now I hope that we have the SA520 with the associated IPS VLAN1, VLAN2 and VLAN3

  We also have the switch port 4 as a network interface

  We are vlan1 reproducing unidentified and vlan2 tag and tag to the SG-300 switch vlan3.

  We do the opposite on the SG-300 switch.

  If you use G10 as the uplink to the SA520 you'll notice of default port 10 must already be in trunk mode.

  Switch ports G10 should be marked for vlan 2 and labelled for vlan3.  It will be, default Gi10 untagged for vlan1.

  Make sure you keep ports switch is correctly set up.

  Best regards, Dave

• The Web of LabVIEW user interface directly to the sensor with Ethernet connection

  Hello

  Is it possible to connect to the interface user Web of LabVIEW directly to a sensor with Ethernet connection?

  By directly, I mean without using any Web Service LabVIEW VI.

  Thank you

  Marcelo

  Hello

  The only communication with other devices using the Web user interface designer is through web services, either motorized or not LabVIEW. To connect with a sensor with the generator of the user Web interface without using LabVIEW, the sensing device must be accessible via HTTP and give you a way to read its data using XML web services based on.

• PIX 501, allows external clients only before the next hop to connect.

  Here's the problem:

  I have configured the Pix501 to accept PPTP connections and it works. I tried using a laptop with win98 on the same network segment (of the external interface). However, whenever my customers who are on a different ISP try to connect they may not. I tried with my laptop even home and another location, and all fail.

  I read recently that a router/firewall may block certain types of packets that do not establish PPTP connections. I think this is my problem, but I am unable to find information to pass on to my ISPS support staff.

  This is the router that provides the pix with the external connection is the problem in my view.

  Any thoughts?

  PPTP uses GRE packets. Ask them if they are blocking GRE, also ask if they block ESP and AH (types of IPSec packets, you can switch to IPSec if you determine that ISPS for your end-users block GRE to try to shake down to rates for dsl/cable "class business".)

• Last update of Windows 8 caused the interruption with internet connection

  I couldn't connect to the internet after the update. I finally had to go back in time and get rid of the update. Now my internet connection is fine. However, who am I without the update next? Does anyone else have this problem?

  Hello

   
  Please help me with the following information:
   
  1. what type of internet connection you have?

  2. What is the brand and model of the computer?

  3. do you get an error message, if yes, what is the exact error message when you lose the Internet connection?

  4. What is the number of KB updates that are installed?

  As you say, when go you back to the previous point system to remove the update Windows Internet connection works fine. lets check what update is causing the problem.

  I suggest you to install the updates of windows one by one and check the update the Internet connection problem occurs.

  Please enter the number of this update and let us know.

  Windows Update: Frequently asked Questions reference (how can I find out what were the updates installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Additional information:

  You can see the complete procedure in the article below and check if it helps.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps, please respond with the requested information and the State of the question for any other help.

• Can not play any YouTube video or even get YouTube to the charge with any video

  If I try to load videos hosted on YouTube, they won't charge, they will not show even a placeholder to show that something should be there. If I go on YouTube, the site does not load with any video. All I get is a list of links to subscribed channels and my account and all these nonsense, nothing that looks even remotely like a video. This occurred only since 28 beta 2 has been installed.

  If you use extensions (Firefox/tools > Modules > Extensions) which can block content (e.g., Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that these extensions are not blocking content.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes