Configure the vlan with SG 300 - 10 p and 520 SA

Similar Questions

• A bet with the network team - configure the VLANs on Teddy does not work against Cisco?

  Hello

  We have a great place of Esx and I have a bet with one of the network Admins.

  I configured a vSwitch to work with 1 bear. On this vSwitch I configured 1 vlan with a Vlan ID 100

  I told the guy from the network to set up the bear side here and he said he has set up 'Access' and not trunk as normally I ask because it's only 1 Vlan.

  I said ok and we tried and nothing works, when I configured the Vlan 0 in the Esx, it started working.

  Of course we cannot leave it like that and need to Config the Vlan on the Esx.

  I told them that once I configured the Vlan on my side there is nothing to do there, and they need to do the thing here.

  they say the same thing.

  Who is right? It is something they need to configure side here if she's 'access' and not 'trunk '?

  or is it something at my side?

  This mayble help your network http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004074 management team

  and

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003806

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• How to configure the VLAN-access plan on Cisco 3650

  Hello

  I would like to configure the VLan-access plan to filter some of the traffic VLAN, but I am unable to run vlan-map command on the cisco L3 3650 v03.06.00E

  Hello ahmed,.

  According to the command search tool, 3650 v03.06.00E does not support the vlan-access plan.

  You will need to catalyst 3650, 3SE to configure "vlan access map.

  https://Tools.Cisco.com/support/CLILookup/cltSearchAction.do

  Show vlan-plan of access (catalyst 3650, 3SE)

  VLAN-access plan (catalyst 3650, 3SE)

  I hope this helps.

  Please evaluate the useful messages.

  Thank you.

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• How to configure the listener with SSL

  Hi Experts,

  I use 11g R2 EE. I want to configure my database listener so that it can be connected using SSL.

  Can someone provide me guide step by step to configure the listener with SSL (including the portfolio so that comes in the image).

  The command line configurations will be well appreciated.

  Thanks in advance

  Alexander gelin

  The client configuration is the same as the server:

  1. create the portfolio.

  2 creating CSR and copy it in CA.

  3. the CSR signal with your certificate root.

  4 copy signed CRT file and root of public certificate to the client.

  5 configure the sqlnet.ora clients.

  Heavy customers already contains the necessary files. For thin clients, it is necessary to install the full or instant client.

  In SQLDeveloper, connection string should be like:

  jdbc:oracle:oci:@(DESCRIPTION= (ADDRESS_LIST= (ADDRESS= (PROTOCOL=TCPS)(HOST=)(PORT=))) (CONNECT_DATA= (SERVICE_NAME=)) (SECURITY= (MY_WALLET_DIRECTORY=D:\Oracle\client.test.p12)))

• How can I configure the element with the script names?

  Could Hello someone give me a hand?

  I created symbols on the stage of this script below.

  ------------------------------------------------------

  for (k = 0; k < 5; k ++) {}

  sym.createChildSymbol ("mySymB", "Stage");

  }

  ------------------------------------------------------

  How can I configure the element with the script names?

  Because, when I try to control a symbol by using the getSymbol("---") command.

  I need to know the name of the item given to each symbol.

  Concerning

  Yes, you're right.

  Using 'Code-Example' If you write sym.getSymbol ("mySymB") that edge returns the undefined value.

  With "Drag-and-drop-Example", you can use sym.getChildSymbols ().

• I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  This has happened

  Each time Firefox opened

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file

  I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.

  c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON

  This file can be replaced.  When I scan this folder individually its fine, please help

  Thank you

  Hello

  What protection software antivirus you are running on the computer?

  Method 1: Check if you can run the scan in safe mode without in all questions

  Follow the steps mentioned in the link below to access the secure mode
  Startup options (including safe mode)

  Method 2: you can run Safe Mode security monitor, see the steps in the article below
  How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe

  Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
  Check your hard drive for errors

  If the problem persists,

  Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference

  Note: Copy the file to the original location.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to use the webcam with Skype it blocks Skype and said "Skype has stopped working, windows is checking for a solution."

  Original title: lifecam 3000 and Skype does not?

  Hello, I tried the two 5.5 beta and 5.3. When I try to use the webcam with Skype it blocks Skype and says "Skype has stopped working windows is checking for a solution." I have windows update connection bars 4/5 drivers and my computer ==> http://www.newegg.com/Product/Product.aspx?Item=N82E16883103361 help is appreciated, thanks

  Hello, I had just fixed yesterday. I deleted the drivers and programs that accompanies it, it ends up being the lifecam software that comes with it interfering with Skype, thanks to all who help :)

• Configure the VLAN voice and data in CISCO SF 300 8 P

  I have a couple of Cisco SF 300 8 P and P 24 switches. I have voice and data VLANS configured as:

  Data VLAN: default 145.17.59.0/24

  Voice VLANS: VLAN 20 172.22.20.0/24

  I have different DHCP servers regarding the data VLAN, we have a physical server that is configured for 145.17.59 * extended IP and Voice VLAN DHCP Server is configured as a router gateway with option 150.

  This configuration works very well with other cisco 2960 switches and 3750 etc. except CISCO SF 300 8 P and 24 p. I tried to set up the voice and data VLAN in these CISCO switches so that phone CISCO (model 6941) should get IP of the VLAN voice and PC should get the IP address of the DHCP server on the data VLAN. I tried several techniques such as LLDP, Port-to-VLAN Config etc.

  Can anyone please guide me / help on this.

  Kind regards
  A K.M.Sayeed

  Hi A.K.M., with Cisco phones you should be able to define simply automatic voice VLAN to be VLAN20.

  ID of the vlan 20 voices

  You must ensure CDP or LLDP is enabled as well. I would check in the web GUI. DHCP for phones can come from a DHCP server on a port access VLAN20 switch, or you can use dhcp for assistance to redirect DHCP server elsewhere.

  If you prefer or you have problems with the CDP or LLDP, you can also program the ports as trunks and add the tag VLAN 20 for them.  In this scenario, you need to ensure inter - vlan routing works and phones that download the file config with corrrect VLAN config.

  These switches do not run ios, so they are similar, but different from the catalyst switches that you mentioned.

  -remember messages useful rate.

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Need help to configure the VLAN on a powerconnect 5448

  Hello world

  I am currently working on 2 switches PowerConnect 5448 but I'm completely lost in configuring VLAN.

  My bow:

  

  My needs are:

  -J' have 2 different networks that need to be isolated in different VLANS

  -I want to port 11-14 to use for network backup, all others must be used for the production network.

  -This 2 networks must pass through the port 48 (fiber)

  How can I configure this kind of network on the powerconnect interface (or via telnet)?

  My understood are the following, I have to create 2 different VLAN tag all ports, switch to safe mode all ports of the entitlement each port to the VLAN voted. Am I wrong?

  How the fiber port?

  Thanks in advance for your help on this matter.

  Since your 2 VLAN need not communicate with each other, you should be able to get this working.

  The easiest way to do this would be to have your production on VLAN 1 and VLAN 2 second network.

  Assign an IP address to the switch with the command IP #.

  Assign a default gateway with the # ip default-gateway command.

  Create a VLAN 2:

  Database console (config) # vlan

  Console (config - vlan) # vlan 2

  Set 11-14 ports to access the mode for VLAN 2

  Console # switchport mode access

  Console # switchport access vlan 2

  Set 48 on trunk or general mode ports.

  Console # switchport mode Trunk

  console # permit trunk switchport vlan add 2

  You should get pretty close to a work environment. You may encounter some problem with VLAN 2 contacting 192.168.1.0, maybe just need to put it up and test.

  Here are a few links to software packages and manuals that can help.

  Firmware.

  http://Dell.to/1tz8tW0

  Manuals.

  http://Dell.to/1yqV4DJ

  Keep us on how will your configuration.

• Configure the VLAN SG-200-26 2 p using WRVS4400N

  I would like to configure two VLANS on my SG-200-26 p switch. Using port 25 for VLAN 1 and port 26 for VLAN 2 from my WRVS4400N. Then assign each port (1-24) to one or the other VLAN.

  My router has 2 VLAN private Public (1) (2). Private is conifured wireless 1, 3 & 4 and private ports. Configured public port 2 and public wireless.

  Each work fine with different IP on each VLAN.

  Can I configure the switch as described above by using port 25 and 26? Y at - it instructions somewhere?

  PEOPLEVISON,

  Under the terms of a Port VLAN membership, you may need to select a port before joining VLAN...

  You can also us Port to VLAN if you wish. Just the VLAN at the top and click on Go. Then check the radio button for Untagged for the ports you want to in this VLAN.

  I have no problem with what you're trying to do. Please keep us updated.

  -Marty

• Configuration of VLAN Cisco SG 300-10

  I just got a 300-10 switch Cisco SG and I am a relative novice working with smart switches, so bear with me. I added a VLAN (VLAN 2) and assigned port 7. So now, there is the default VLAN 1 and VLAN 2. The IPv4 Interface is:

  VLAN 1

  Interface: VLAN 1

  Type of IP address: static

  IP address: 172.26.0.192

  Mask: 255.255.0.0

  Status: valid

  VLAN 2

  Interface: VLAN 2

  Type of IP address: static

  IP address: 172.27.0.1

  Mask: 255.255.0.0

  Status: valid

  The default gateway is 172.26.0.252.

  IPv4 static routes now look like this:

  

  I changed the mode of the system of layer 3 to layer 2 since I guess I have to make a VIRTUAL LAN see devices on another. I have a mute switch is connected to port 7 (VLAN 2) and a laptop connected to the mute switch with IP 172.27.0.117. On the SG 300-10 switch port 1 is connected to the default gateway (172.26.0.252), and port 2 is connected to a PC with the IP 172.26.0.136. From the Office I can access the internet through the default gateway. As expected, I can't access internet from the laptop (IP 172.27.0.117) I see the desktop because they are on separate VLANs. I want to be able to access the internet and also to be able to see my office (172.26.0.136) of the laptop, so I need the VLAN to be able to access the devices on the other. How would I go to do this? Moreover, all this is done in a test environment because I make sure I get this right before deployment. Thanks for your help on this.

  I have a few questions about the installation:

  (1) what is the default value as the value Gateway for VLAN1 on 2 ports (172.26.0.136) PC?

  (2) is your Internet on Port 1 VLAN 1 (172.26.0.252) gateway, a static route for the 172.27.0.0 pointed out what subnet VLAN 1 (172.26.0.192) as the next hop router?

  (3) is the default gateway for the laptop computer on Port 7 VLAN 2 pointed VLAN 2 (172.27.0.1)?

  If the General Directorate for the PC in the VLAN 1 is the gateway/router Internet router/gateway would require a road static to the interface VLAN 1 IP address for the subnet on the LAN VIRTUAL 2 so that the routing table in the switch can be used. By setting the static route to the Internet this router will fix the problem of connectivity Internet of VLAN 2 as well. Basically the Internet router needs to know how to do and the 172.27.0.0 subnet via the switch. Hope this helps.

• How to configure the FWSM with HSRP support

  Hi all

  We have 2 * 6500 Series switches with each FWSM core installed.

  There are some users of VLANs (each floor) and a lot of servers inside that belong to some other VLANs.

  Basic switches have been configured with redundancy HSRP (active/passive).

  Today, I am picky with FWSM routed mode configuration.

  There is no problem with the default configuration and testing,

  I mean assigning VLANS to FWSM and delete addresses IP of MSFC.

  But unfortunately whenever I have such a configuration, do I lose naturally redundancy between switches.

  In our situation HSRP is a must.

  Is it possible to fix this design in routed mode, with support HSRP. ?

  Thank you

  Erdem.

  Hi Erdem,

  (correct me if I'm wrong, Jon) - If you remove all the Lass you must route all traffic of course the FWSM.

  What we did was to create a transfer network (VLAN) with a SVI and FWSM inside external interface. Now, the default gateway on the FWSM is on the IP address of the SVI. So most of the range is configured on the switch.

  Kind regards

  Jürgen