Client console virtual trava ao access!

Similar Questions

• Cannot use the client console discovers vGpu 6.1

  Hi all

  I'm unable to use the client console after deploying machine put in common, I see a black screen.

  Master image work of the console very well and when I connect via the customer direct access overview and breath all work very well.

  I have a virtualized environment based on vsphere esx 6.0, view Server 6.1 and Nvidiia vib file NVIDIA-vgx - VMware_ESXi_6.0_Host_Driver_346.42 - 1OEM.600.0.0.2159203.vib (for cards NVIDIA K1).

  Best regards

  Once the NVIDIA driver is installed and enabled, it disables the display of the console, so this is of design and a sign of properly working config.  Direct connection is the right way to proceed, not RDP as this will bypass our driver.

  -Luke

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• Can not power on virtual machines "cannot access the file because it is locked.

  Virtual machines have been working well - then the storage system is down.  After the storage system returns upwards that I can't turn on a number of virtual machines.  Get this error when I try to turn it on:

  Cannot power on vmname on esxhostname.xxxxx.com. Unable to access file < unspecified file name > because it is locked
  error

  1. To check the locks on the Service Console on non ESXi servers, run the command:

     lsof | grep

     COMMAND PID USER FD TYPE SIZE NŒUD NOM_PERIPHERIQUE
     71fd60b6-3631 root 4r REG 0.9 10737418240 23533

     Note: If there is no Console of Service process the locking file, you should receive no printed output. If you receive results, however, file a support request to identify the process and to determine the causes.  If it is a third-party process, however, contact the appropriate provider to determine the cause before you kill the process ID, because it can happen again in the future.

     Stop the process and the lock ID using the kill command. In the example above, the process ID is 3631:

     kill the 3631

     After the termination of the process, you can try to turn on the virtual machine or access the file resource.

  2. To check if the virtual machine is always a world ID assigned, run these commands on all ESX/ESXi hosts:

     CD/tmp
     VM-support - x

     Available to debug worlds:
     WID =

     On the ESX/ESXi host where the virtual machine still works, kill the VM, which releases the lock on the file. To kill the virtual machine, run the command:

     VM-support - X

     Where the is the ID of the world of the virtual machine with the locked file.

     Note: this command takes 5-10 minutes to complete. Answer No to "can I include a screenshot of the virtual machine", and answer Yes to all subsequent questions.

     After the termination of the process, you can turn on the virtual machine or access the file resource.

  Deleting the file .lck (NFS only)

  The virtual machine files can be locked via NFS storage. You can identify this as reported by .lck files. # (where # is the ID of the world that holds the lock file) at the end of the file name. It is a NFS file lock and appears only when you use the ls command as it is the hidden file.
  Beware: they can be removed safely only if the virtual machine is not running.

  Note: VMFS volumes have no .lck files. The locking mechanism for VMFS volumes is managed within VMFS metadata on the volume.

  You must kill the process that is locked, if it is not the case, you probably need to restart the VMware host.
  I tell you from experience most likely end up rebooting it.

• Cannot log on to vista Home premium, get the error "the Group Policy client service has no journal, access is denied."

  Unable to connect, password ok, children with message "the Group Policy client service has no journal, access denied" completely locked, they had tried to access and configure windows media center via the xbox 360 but had problems too. any advice appreciated

  Hello

  
  1. how many user accounts have been created on the computer?
  
  2 how many computers are connected to your network home?
  
  Please follow the links below to solve the problem.
  
  Method 1
  
  If you have a hand (main) user account then log on to the main user account and solve the problem by following the link below.
  
  Step 1
  
  Difficulty of a corrupted user profile
  
  http://Windows.Microsoft.com/en-AU/Windows-Vista/fix-a-corrupted-user-profile
  
  If the previous step fails, then the same try starting in safe mode.
  
  Step 2
  
  Start your computer in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  You can also try to change the standard administrator and restart corrupted account Type and check.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type
  
  Method 2
  
  Follow the suggestions posted by the user in the community
  " . m - shaggy " to help solve the problem.
  
  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/c88515b4-4be7-4f6f-9988-80f8a5683b41
  I hope this helps.

• When I start my pc it says that the Group Policy client service a not logon access is denied

  Hello, today I went to start my computer and when it was loading windows, he said "the Group Policy client service has no login access denied" can someone help me how to solve this cant get on my desk

  I opted for the last restore point and now it works thank you for your answers

  I'm glad to hear that you guessed it sorted. To protect you against other misadventures, you should now do this:
  • Burn, test and label a CD to repair Windows.
  • Create, test, and document an admin account to spare, even you have a spare House key.

• Virtual MACHINE cannot access the vlan

  We have a vSwitch with a portgroup that services our Production network with no VLAN specific specified (0).  Gave us access to a new vlan on a physical Cisco switch level in our chassis and basic in our data center switches.

  VSwitch physical maps show the new VLAN and production networks when you look at the vSwitch properties and the port group.

  However we still cannot get out on the side of the chassis with a configured virtual computer to access the new VLAN.  Do we need to add a new port group to the vSwitch specifying the new vlan?  Any other ideas?

  I have attached a doc showing the 101 new VLAN as a network, that NETWORK cards can see.

  Thank you

  Morrisos

  This VLAN 101 are arriving in two network cards?

  If not, configure the two network cards.

  If the vlan is marked on your switch, when you create a port group, set VLAN ID 101.

• For consoles Virtual Center and VM user level access

  All,

  Is it possible to provide a user with access to the virtual Center and don't have rights to access a particular SMV console... ??

  This is because the server is in a DMZ and no network management is provided.

  Any suggestions are welcome.

  Nels

  You use VMware permission.

  First to create Windows user (may be a local user on VC or a user AD).

  Then on your virtual machine (in the authorization tab) add a role (e.g. VM user).

  More info on:

  http://www.VMware.com/PDF/vi3_vc_roles.PDF

  http://www.Petri.co.il/VMware-ESX-roles-permissions-privileges.htm

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• vSpere compatibility of client Client and Virtual Infrastructure on Windows 7 64 bit

  I need to manage either an ESXi 3.5 and ESXi 4.1 hosts a 64-bit Windows 7, drunk customer I suspect there is some sort of incompatibility between clients and.

  First of all, I downloaded from my server ESXi 3.5.0 the VMware Infrastructure Client 2.5 and I installed it on my 64 bit Windows 7 client.

  It is installed as a 32 bit application and it works fine. I can manage virtual machines and open a virtual computer console.

  Second, I downloaded from my server ESXi 4.1 the VMware customer 4.1.0 vSpere and installed on the same client 64-bit Windows 7.

  At this point if I click on the VMware Client vSpere and I try to connect to the ESXi 3.5.0 server it works fine, but if I try to access the console of any virtual machine I get a white window with no option to manage the virtual computer.

  If I connect to the ESXi 4.1 server and try to open the console of any virtual machine, it works fine.

  • Shoud I specitfy no matter what setting during the installation of two clients?
    
  • Can I enter any parameter during the launch of one of the two clients?
    
  • Should I install a specific version of 64-bit?
    

  Are there any other measures to make 2 clients work on the same client 64-bit Windows 7?

  In addition, I have either a Windows XP 32-bit and a 32 bit Windows 7 with the clients installed and work boxes...

  Concerning

  Marius

  Hi guy,

  Try this one: VMWare KB1026153

• VSphere Client console problem

  I'm currently running client Vsphere 4.0.  I have 3 virtual machines created and loading them with ISO images.  However, I have other software I need to install other software using setup.exe.  I not found on each map a drive to the virtual machine through the console.  Does anyone have any ideas how can I map a drive or a cut and paste.

  Help!

  Thank you

  You cannot do this using the vSphere client

  Must use the usual means, share the folder on the network, access it on VM and do the configuration

  ~ John # VCP 4

• Client connected to the remote access VPN, but got the wrong default gateway

  Hi all

  I struggled for a few days and really need some help here. My PC (192.168.254.x) is on the same vlan with external interface (192.168.254.171) to my PIX506E. When I run the Cisco VPN client, my PC shows connected and gets the IP address of 10.9.0.150 that is expected. However, it also gets the entry door of 10.9.0.1 that I have no idea where it came from. So my PC can not access any external or internal network.

  I've listed below the configuration of my and highlighted the part that I typed in. PIX version 7.1 (2) is the latest version that I can install on PIX506E. Help, please. Thank you very much.

  pixfirewall # sh run
  : Saved
  :
  PIX Version 7.1 (2)
  !
  pixfirewall hostname
  activate 2KFQnbNIdI.2KYOU encrypted password
  names of
  !
  interface Ethernet0
  nameif outside
  security-level 0
  IP 192.168.254.171 255.255.255.0
  !
  interface Ethernet1
  nameif inside
  security-level 100
  IP 10.10.10.1 255.255.255.0
  !
  2KFQnbNIdI.2KYOU encrypted passwd
  Flash: / pix712.bin starting system
  passive FTP mode
  pager lines 24
  Enable logging
  timestamp of the record
  logging buffered information
  Outside 1500 MTU
  Within 1500 MTU
  10.9.0.150 mask - local 10.9.0.160 ROBERT-pool IP 255.255.255.0
  don't allow no asdm history
  ARP timeout 14400
  Route outside 0.0.0.0 0.0.0.0 192.168.254.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
  Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
  Timeout, uauth 0:05:00 absolute
  internal group strategy Robert-GP
  attributes of Group Policy GP-Robert
  value of server DNS 8.8.8.8
  username cisco password encrypted privilege 15 3USUcOPFUiMCO4Jk
  robert yXUoa8oHzS0Ncp2O of encrypted password username
  robert username attributes
  Strategy Group-VPN-Robert-GP
  the ssh LOCAL console AAA authentication
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  Dynamic crypto map DYN1 1 set of transformation-RIGHT
  Dynamic crypto map DYN1 1jeu reverse-road
  map MYMAP 1 ipsec-isakmp dynamic DYN1 crypto
  MYMAP outside crypto map interface
  ISAKMP allows outside
  part of pre authentication ISAKMP policy 1
  ISAKMP policy 1 3des encryption
  ISAKMP policy 1 sha hash
  Group of ISAKMP policy 1 2
  ISAKMP policy 1 life 43200
  ISAKMP nat-traversal 30
  tunnel-GROUP ROBERT type ipsec-ra
  tunnel-group ROBERT-General-attributes
  address-pool ROBERT-
  Group Policy - by default-Robert-GP
  tunnel-group ROBERT-GROUP ipsec-attributes
  pre-shared-key *.
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 60
  SSH version 2
  Console timeout 0
  SSL rc4 - md5 encryption
  Cryptochecksum:7157c6095f2abae2aae9e15c1caa81aa
  : end
  pixfirewall #.

  disconnect from the vpn session after adding the new ACL to the external interface and try again?

  Disconnect the vpn session and try again and if does not apply this line.

  permit same-security-traffic intra-interface

  See the ipsec crytop her.

  Please post this output.

  Thank you

• ASA 5505 IPSec client-to-site any LAN access?

  Hello

  Like many others, I have problems get ipsec vpn clients can communicate with my LAN.

  I have configure ipsec with the wizard, I have also to add an ACL to allow the network to pool for the vpn client to connect to the local network, but with little success.

  Many of the responses I've seen includes changes in the NAT table, I tried a lot of them, but without success.

  There must be something really simple, that it's so frustrating because I guess it is supposed to be a relatively simple thing to get running.

  VPN client (Linux, iptables rules no) get 10.80.80.100 address, but cannot connect to a TCP service on a machine of LAN (no firewall on computer LAN) and can not ping LAN.

  The VPN client routing table:

  Kernel IP routing table
  Destination Gateway Genmask Flags metric Ref use Iface
  85.24.249.35 212.112.31.254 UGH 255.255.255.255 0 0 0 eth0
  10.80.80.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0
  212.112.31.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
  0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 tun0

  : Saved
  
  :
  
  ASA Version 7.2(4)
  
  !
  
  hostname ciscoasa
  
  domain-name default.domain.invalid
  
  enable password xxx encrypted
  
  passwd xxx encrypted
  
  names
  
  !
  
  interface Vlan1
  
  nameif inside
  
  security-level 100
  
  ip address 192.168.0.1 255.255.255.0
  
  !
  
  interface Vlan2
  
  nameif outside
  
  security-level 0
  
  ip address dhcp setroute
  
  !
  
  interface Ethernet0/0
  
  switchport access vlan 2
  
  !
  
  interface Ethernet0/1
  
  !
  
  interface Ethernet0/2
  
  !
  
  interface Ethernet0/3
  
  !
  
  interface Ethernet0/4
  
  !
  
  interface Ethernet0/5
  
  !
  
  interface Ethernet0/6
  
  !
  
  interface Ethernet0/7
  
  !
  
  ftp mode passive
  
  dns server-group DefaultDNS
  
  domain-name default.domain.invalid
  
  same-security-traffic permit inter-interface
  
  access-list tictac_splitTunnelAcl remark allow vpn tunnel users to LAN
  
  access-list tictac_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0
  
  access-list inside_nat0_outbound extended permit ip any 10.80.80.0 255.255.255.0
  
  access-list inside_access_in extended permit ip any any log disable
  
  access-list outside_access_out extended permit ip any any
  
  pager lines 24
  
  logging enable
  
  logging asdm informational
  
  mtu outside 1500
  
  mtu inside 1500
  
  ip local pool vpnpool 10.80.80.100-10.80.80.120 mask 255.255.255.0
  
  icmp unreachable rate-limit 1 burst-size 1
  
  asdm image disk0:/asdm-524.bin
  
  no asdm history enable
  
  arp timeout 14400
  
  global (outside) 1 interface
  
  nat (inside) 0 access-list inside_nat0_outbound
  
  nat (inside) 1 0.0.0.0 0.0.0.0
  
  access-group outside_access_out out interface outside
  
  access-group inside_access_in in interface inside
  
  timeout xlate 3:00:00
  
  timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  
  timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
  
  timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
  
  timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  
  http server enable
  
  http 192.168.0.0 255.255.255.0 inside
  
  no snmp-server location
  
  no snmp-server contact
  
  snmp-server enable traps snmp authentication linkup linkdown coldstart
  
  crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
  
  crypto dynamic-map outside_dyn_map 20 set pfs group1
  
  crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
  
  crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
  
  crypto map outside_map interface outside
  
  crypto isakmp enable outside
  
  crypto isakmp policy 10
  
  authentication pre-share
  
  encryption 3des
  
  hash sha
  
  group 2
  
  lifetime 86400
  
  telnet 192.168.0.0 255.255.255.0 inside
  
  telnet timeout 5
  
  ssh timeout 5
  
  console timeout 0
  
  dhcpd auto_config outside
  
  !
  
  dhcpd address 192.168.0.2-192.168.0.33 inside
  
  dhcpd dns 8.8.8.8 4.2.2.2 interface inside
  
  dhcpd enable inside
  
  !
  
  group-policy tictac internal
  
  group-policy tictac attributes
  
  dns-server value 8.8.8.8 4.2.2.2
  
  vpn-tunnel-protocol IPSec
  
  split-tunnel-policy tunnelspecified
  
  split-tunnel-network-list none
  
  username mattiasb password SVCZv/HMkykG.ikA encrypted privilege 0
  
  username mattiasb attributes
  
  vpn-group-policy tictac
  
  tunnel-group tictac type ipsec-ra
  
  tunnel-group tictac general-attributes
  
  address-pool vpnpool
  
  default-group-policy tictac
  
  tunnel-group tictac ipsec-attributes
  
  pre-shared-key *
  
  !
  
  class-map inspection_default
  
  match default-inspection-traffic
  
  !
  
  !
  
  policy-map type inspect dns preset_dns_map
  
  parameters
  
    message-length maximum 512
  
  policy-map global_policy
  
  class inspection_default
  
    inspect dns preset_dns_map
  
    inspect ftp
  
    inspect h323 h225
  
    inspect h323 ras
  
    inspect rsh
  
    inspect rtsp
  
    inspect esmtp
  
    inspect sqlnet
  
    inspect skinny
  
    inspect sunrpc
  
    inspect xdmcp
  
    inspect sip
  
    inspect netbios
  
    inspect tftp
  
  !
  
  service-policy global_policy global
  
  prompt hostname context
  
  Cryptochecksum:6e456ab21d08182ca41ed0f1be031797
  
  : end
  
  asdm image disk0:/asdm-524.bin
  
  no asdm history enable
  
  

  The list of split tunnel network was put on 'none' in your configuration:

  group-policy tictac attributes
  
  dns-server value 8.8.8.8 4.2.2.2
  
  vpn-tunnel-protocol IPSec
  
  split-tunnel-policy tunnelspecified
  
  split-tunnel-network-list none
  
  
  Please configure the tunnel list to reference the split tunnel ACL as follows:
  
  group-policy tictac attributes
  
     split-tunnel-network-list value tictac_splitTunnelAcl

  Hope that helps.

• port bug console virtual iDrac 2.21.21.21

  Hi all

  We have a R430 with an idrac 8.

  We need to access the virtual console, and for many reasons, it must be that its port is different from the default (5900), let's say 5905.
  Everything works fine with the 2.15.10.10 firmware.

  Today, we updated the firmware with lifecycle controller v.2.21.21.21 and the virtual console a work stoppage: when Java runs, after a few seconds, a warning window appears with the message "the network connection fell.

  We tested it without a firewall or other NAT between, so we think it's a bug of the 2.21.21.21 version.
  With the new version, the virtual console only works if the port is configured to 5900.

  We did a restore to version 2.15.10.10 and everything works fine again, also with a non-standard port.

  Anyone with the same problem?

  Good bye

  Hello

  I just tested it and could not reproduce the problem. Have you been able to reproduce this on another system?

  I would like to start by trying a new port number that has not been used to see if it could be a caching problem. If the problem persists, then reset the iDRAC to default values to generate a new configuration file. The file was corrupted during the update of the firmware.

  Thank you

• vSphere Client Console Session zooms online

  Hi all

  I have a strange here, I hope that someone can help you.  I installed vCenter 6.0 and added my 6.0 hosts.  When I connected the web client of vSphere and open a console in one of my servers Windows 2012 (others worked well) the console session seemed to open up over and over again within himself until I got a ultra zoom in the console session the I can't navigate around where do much of anything with.  Even the prompt to hit ctrl-alt-del and the login screen are ultra zoom.  I tried to use ctrl-mousewheel to zoom out, but who have no real effect, it comes to the smaller icons.  I am able to use the tab and search for open some programs, and I know that they are open because when I alt - tab I can see them and cycle through them, but when I'm on the desktop, I see is a blue field, I can not interact with and a giant cursor.  This behavior is present when I use the client Citrix go and help that is installed on the server, but it's good to a remote desktop session.  I can RDP into the session zoomed and see everything that is open and properly interact with it.  I tried to restart the guest and the host without success.  I am at a loss.  Help!

  I have attached a few screenshots to show what I'm against.

  Nick

  Hello

  I guess that this behavior of the console view of the virtual machine via the c# client is fine?

  What browser do you use on your and have you tried another? It seems strange that this only happens on 2012 R2 servers!

• Time to view Client and Virtual Office

  Hello

  After the change of an hour this weekend, I saw is any time on the virtual office, Virtual Office presents the customer notice time to the user. This means that even if the virtual desktop is not updated for the DST (who was in our case - we found while logging the console), if the users machine that is running the Client to display is updated the user will see the correct time in the virtual office.

  Does anyone know how it works?

  How the customer views applied machine hosting of the customer to the view to enforce his time on the virtual office?

  This feature is called "zone schedule Forwarding", sound activated by default and can be disabled with a GPO if you wish.

  Linjo