Client v 11 Setup.exe ends abruptly after the text-mode windows

Hello

I try to install the Client Oracle v 11 (latest version) 32 and 64-by-side in Win 7 64 bit, 8 GB of RAM

This isn't the Instant Client, but the "regular".

I run the Start.Exe. In the 32-bit Setup program I select the installation type 'Runtime' and it installed fine. Then I restarted and tried to install the 64 bit version of the same Client v 11, but the 64-bit installation starts, I see the text/mode command window and then it closes and nothing happens

I am trying to install in the following folders:

C:\app\ < myUserName > \product\11.2.0\32 bit\client_1

and

C:\app\ < myUserName > \product\11.2.0\64 bit\client_1

Any help will be appreciated

Thank you

Richard

See pl if this thread is relevant - Re: failed to install for 11g Release 2 (11.2) for Microsoft Windows x 64

Tags: Database

Similar Questions

  • Error message: Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the dynamic library CSCDLL.dll, Quickbooks 2012 run

    Original title: error Ordinal 62
    I received the following error sporadically when I try the accounting version of Quickbooks 2012.  Accordingly, it does not run Quickbooks on my desktop but it allows me to run on my laptop.  Help, please.  "Setup.exe - Ordinal not found - the 62 ordinal could not be locatedin the CSCDLL.dll dynamic link library.

    Hello

     

    You can try the following steps and check.

     

    Method 1:

    Check if there is a cscui.dll C:\Windows\SysWOW64 folder.

    The cscui.dll does not exist by default in the C:\Windows\SysWOW64 folder.

    If you find the cscui.dll on the C:\Windows\SysWOW64 you can try right click and rename the cscui.dll to cscui.old.

    Method 2:

    You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

    For more information, you can consult the following link.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 3:

    You can also perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    You can also check the following thread link and check.

    WARNING 62 Ordinal not found in cscdll.dll

  • vmplayer - 5.0.0 ends immediately after the start

    Hello

    I'm under fedora 17 with 3.5.2 - 3.fc17.x86_64 kernel and VMware-Workstation-full-version 9.0.0 - 812388.x86_64.bundle.
    vmplayer - 5.0.0 ends immediately after the start.

    vmplayer - 5.0.0 runs only with kernel - 3.4.0 - 1.fc17.x 86_6 4

    The content of the vmware-modconfig - 5653.log file looks as follows:

    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Log for VMware Workstation pid = 5653 version = version 9.0.0 Build = build-812388 option = output
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: The process is 64-bit.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Host codepage = UTF-8 encoding = UTF-8
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Host is the version of Fedora Linux 3.5.2 - 3.fc17.x86_64 17 (Beefy Miracle)
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: Msg_Reset:
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': Datei oder Verzeichnis nicht found.
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: —————————————-
    2012-08-23 T 20: 00:54.505 + 01:00 | vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Msg_Reset:
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / home/martin/.vmware/config ': Datei oder Verzeichnis nicht found.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: —————————————-
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | I120: Optional preferences PREFS not found in home/martin/.vmware/config file. Using the default values.
    2012-08-23 T 20: 00:54.506 + 01:00 | vthread-3 | W110: Connecting to /tmp/vmware-martin/vmware-modconfig-5653.log
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vmmon module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for module vmnet.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vmblock module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for vmci module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Reading in info for the vsock module.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Definition of vsock to depend on vmci.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Created new pathsHash.
    2012-08-23 T 20: 00:54.511 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmmon.
    2012-08-23 T 20: 00:54.513 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.513 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".
    2012-08-23 T 20: 00:54.516 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.516 + 01:00 | vthread-3 | I120: Modinfo invoking on 'vmblock '.
    2012-08-23 T 20: 00:54.519 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.519 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmci.
    2012-08-23 T 20: 00:54.521 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.
    2012-08-23 T 20: 00:54.521 + 01:00 | vthread-3 | I120: Modinfo calling over 'vsock.
    2012-08-23 T 20: 00:54.523 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

    The content of the file looks like kernel.log as follows:

    August 23 at 20:01:01 localhost kernel: [710.974813] general protection fault: 0000 [#5] SMP
    August 23 at 20:01:01 localhost kernel: [710.974818] CPU 1
    August 23 at 20:01:01 localhost kernel: [710.974819] Modules related to the: stv0299 ves1x93 dvb_ttpci ttpci_eeprom saa7146_vv saa7146 dvb_core videobuf_dma_sg videobuf_core v4l2_common videodev media exactly bluetooth rfkill vmnet (O) (O) vsock vmci (O) (O) vmmon fuse snd_hda_codec_hdmi ppdev coretemp lpc_ich mfd_core nvidia (IN.) snd_rme96 snd_hda_codec_analog serio_raw parport_pc parport skge sky2 nfsd lockd sunrpc kvm_intel i2c_ auth_rpcgss nfs_acl i2c_i801 shpchp core KVM snd_hda_intel snd_hda_codec snd_hwdep snd_pcm asus_atk0110 uinput microcode snd_page_alloc snd_timer snd soundcore binfmt_misc firewire_ohci firewire_core crc_itu_t edac_core i82975x_edac [last unloaded: scsi_wait_scan]
    August 23 at 20:01:01 localhost kernel: [710.974851]
    August 23 at 20:01:01 localhost kernel: [710.974853] Pid: 6227, comm: vmware-vmx Tainted: manufacturer of P D O 3.5.2 - 3.fc17.x86_64 #1 rod system product name/P5WDG2 WS PRO
    August 23 at 20:01:01 localhost kernel: [710.974855] RIP: 0010: [] [] HostIF_SafeRDMSR + 0xf/0 × 30 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974863] RSP: 0018:ffff88016e7e5b88 EFLAGS: 00010246
    August 23 at 20:01:01 localhost kernel: [710.974864] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 000000000000048b
    August 23 at 20:01:01 localhost kernel: [710.974866] RDX: 0000000000000000 RSI: ffff88016e7f2590 RDI: 000000000000048b
    August 23 at 20:01:01 localhost kernel: [710.974867] RTB: ffff88016e7e5b88 R08: R09 ffff8801bfc96610: ffffffffa0d46672
    August 23 at 20:01:01 localhost kernel: [710.974868] R10: 0000000000000038 R11: 0000000000003246 R12: 0000000000000000
    August 23 at 20:01:01 localhost kernel: [710.974869] R13: ffff88016e7f2580 R14: ffff88016e7f2580 R15: 00007fffdfd66850
    August 23 at 20:01:01 localhost kernel: [710.974871] FS: 00007ff5cd372740 (0000) GS:ffff8801bfc80000 (0000) knlGS:0000000000000000
    August 23 at 20:01:01 localhost kernel: [710.974872] CS: 0010 DS: 0000: 0000 CR0: 0000000080050033
    August 23 at 20:01:01 localhost kernel: [710.974874] CR2: 000000000099ca 10: 00000001446 d 5000 CR4 CR3: 00000000000007e0
    August 23 at 20:01:01 localhost kernel: [710.974875] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    August 23 at 20:01:01 localhost kernel: [710.974876] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    August 23 at 20:01:01 localhost kernel: [710.974878] vmware-vmx process (pid: 6227, threadinfo ffff88016e7e4000, task ffff8801b2699710)
    August 23 at 20:01:01 localhost kernel: stack [710.974879]:
    August 23 at 20:01:01 localhost kernel: [710.974880] ffff88016e7e5bb8 ffffffffa0d48e23 ffffffffa0d48da0 ffff88016e7e5be8
    August 23 at 20:01:01 localhost kernel: [710.974883] ffff88016e7f2580 ffff88016e7e5bd8 0000000000000000 ffffffffa0d47780
    August 23 at 20:01:01 localhost kernel: [710.974885] ffff88016e7f2580 00000000fffffff4 ffff88016e7e5c08 ffffffffa0d4ac1c
    August 23 at 20:01:01 localhost kernel: [710.974888] Scout:
    August 23 at 20:01:01 localhost kernel: [710.974892] [Vmx86GetMSR] + 0 × 83/0xd0 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974896] []? Vmx86GetUnavailPerfCtrsOnCPU + 0 × 0 × 150/150 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974900] [HostIF_CallOnEachCPU] + 0 × 0 × 20/40 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974904] [] Vmx86_GetAllMSRs + 0x2c/0 × 50 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974907] [] LinuxDriver_Ioctl + 0x70f/0xd40 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974911] []? unlock_page + 0 × 0 × 31/50
    August 23 at 20:01:01 localhost kernel: [710.974914] []? __do_fault + 0x3f9/0 × 560
    August 23 at 20:01:01 localhost kernel: [710.974916] []? handle_pte_fault + 0 × 95/0xb10
    August 23 at 20:01:01 localhost kernel: [710.974920] []? ext4_file_write + 0xbf/0 × 260
    August 23 at 20:01:01 localhost kernel: [710.974922] []? free_pages_and_swap_cache + 0xad/0xd0
    August 23 at 20:01:01 localhost kernel: [710.974924] []? handle_mm_fault + 0 × 259/0 × 320
    August 23 at 20:01:01 localhost kernel: [710.974927] []? do_page_fault + 0x1bc/0x4b0
    August 23 at 20:01:01 localhost kernel: [710.974930] [LinuxDriver_UnlockedIoctl] + 0 × 0 × 18/20 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974933] [do_vfs_ioctl] + 0 99/0 × 580 ×
    August 23 at 20:01:01 localhost kernel: [710.974935] [sys_ioctl] + 0 × 99/0xa0
    August 23 at 20:01:01 localhost kernel: [710.974937] [system_call_fastpath] + 0 × 16/0x1b
    August 23 at 20:01:01 localhost kernel: [710.974938] Code: 83 c4 e8 a6 01 84 3rd e0 44 89 e0 48 3 b 43 08 and 72 e9 48 89 df e8 33 b4 42 e0 eb 9th 90 55 48 89 e5 66 66 66 66 90 31 c0 89 89 32 31 f9 c2 ff 41 89 c0 48 e2 20 89 f8 4 c 09 48 89 16 5 c2 c1 d c3
    August 23 at 20:01:01 localhost kernel: [710.974962] RIP [] HostIF_SafeRDMSR + 0xf/0 × 30 [vmmon]
    August 23 at 20:01:01 localhost kernel: [710.974966] RSP
    August 23 at 20:01:01 localhost kernel: [710.974968] - [end trace 04aa45b3d8c2dbda].

    VMware kernel modules compiles well

    [root@fc17 tmp]# vmware-modconfig --console --install-all
Stopping vmware (via systemctl):                           [  OK  ]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmmon-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/linux/hostif.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/linux/driver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/linux/driverLog.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/apic.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/memtrack.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/hashFunc.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/vmx86.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/cpuid.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/task.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/comport.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/common/phystrack.o
  CC [M]  /tmp/modconfig-C4tvy7/vmmon-only/vmcore/moduleloop.o
  LD [M]  /tmp/modconfig-C4tvy7/vmmon-only/vmmon.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmmon-only/vmmon.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmmon-only/vmmon.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmmon-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmmon-only'
cp -f vmmon.ko ./../vmmon.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmmon-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmnet-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/driver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/hub.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/userif.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/netif.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/bridge.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/filter.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/procfs.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/smac_compat.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/smac.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/vnetEvent.o
  CC [M]  /tmp/modconfig-C4tvy7/vmnet-only/vnetUserListener.o
  LD [M]  /tmp/modconfig-C4tvy7/vmnet-only/vmnet.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmnet-only/vmnet.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmnet-only/vmnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmnet-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmnet-only'
cp -f vmnet.ko ./../vmnet.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmnet-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmblock-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/filesystem.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/file.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/block.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/module.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/super.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/control.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/stubs.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/inode.o
  CC [M]  /tmp/modconfig-C4tvy7/vmblock-only/linux/dentry.o
  LD [M]  /tmp/modconfig-C4tvy7/vmblock-only/vmblock.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmblock-only/vmblock.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmblock-only/vmblock.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmblock-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmblock-only'
cp -f vmblock.ko ./../vmblock.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmblock-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vmci-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/linux/driver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/linux/vmciKernelIf.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciDriver.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciResource.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciRoute.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciContext.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciDatagram.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciHashtable.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciEvent.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciQueuePair.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciQPair.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/common/vmciDoorbell.o
  CC [M]  /tmp/modconfig-C4tvy7/vmci-only/driverLog.o
  LD [M]  /tmp/modconfig-C4tvy7/vmci-only/vmci.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vmci-only/vmci.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vmci-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-C4tvy7/vsock-only'
/bin/make -C /lib/modules/3.5.2-3.fc17.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/af_vsock.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/vsockAddr.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/notifyQState.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/util.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/stats.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/linux/notify.o
  CC [M]  /tmp/modconfig-C4tvy7/vsock-only/driverLog.o
  LD [M]  /tmp/modconfig-C4tvy7/vsock-only/vsock.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /tmp/modconfig-C4tvy7/vsock-only/vsock.mod.o
  LD [M]  /tmp/modconfig-C4tvy7/vsock-only/vsock.ko
make[1]: Leaving directory `/usr/src/kernels/3.5.2-3.fc17.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
  MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-C4tvy7/vsock-only'
make[1]: »postbuild« ist bereits aktualisiert.
make[1]: Leaving directory `/tmp/modconfig-C4tvy7/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory `/tmp/modconfig-C4tvy7/vsock-only'
Starting vmware (via systemctl):                           [  OK  ]

    The two files "/ usr/lib/vmware/settings ' and ' / home/martin/vmware/config ' do not exist.
    Now the question is, how do I create these files or what files should be removed from the old settings. ?

    Why are there vmplayer immediately after startup. ?

    I had what I think it's the same problem on 9, Fedora-17 64-bit workstation.

    I used the patch vmmon here:

    http://communities.VMware.com/thread/400616?start=15&TSTART=0

    and modifed the patcher created by Artem S. Tashkinov to apply it.

    Solved it for me, I hope for you, too.

  • HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

    Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

    Hi @Ron9871,

    Welcome to the Forums of HP Support!

    I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

    If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

    • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
    • Type the IP address in the browser to bring up the SAP.
    • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
    • Select Manual IP.
    • Enter your IP address manual (192.168.0.232)
    • Enter 255.255.255.0 for the subnet mask, except if it is different.
    • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
    • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
    • Click on apply.

    Please restart the router, the printer and the computer in this sequence.

    If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    You can try to change your WSD printer port by a Standard TCP/IP port.

    To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

     

  • After the upgrade of Windows Windows 7 10, could not recover my product key.

    Original title: windows 7

    After the upgrade to windows 10 windows 7, could not recover my product key. When I connect my system am get notification that you may be victim of software counterfeiting and copy of windows is not genuine. you do me too much this error code. 0xC004F057. Please help me to recover my product key. my windows does not work after the upgrade as well.

    I suggest that you run the diagnostic tool Microsoft Genuine Advantage in normal mode and copy and paste the results into a response for further analysis:

    http://go.Microsoft.com/fwlink/?LinkId=52012

    Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

  • Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

    This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

    -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

    -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

    Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

    Driver provider: Microsoft
    Driver date: 14/05/2009
    Driver version: 7.2.1127.2008
    Digital signer: Microsoft Windows

    Thus, we have solved the problem! There are two possibilities of your problems:
    1 company Adobe uses the Bonjour service , this service should be disabled.
    Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

    2. If it is not signed as Bonjour service. Try to disable the service:
    Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

    It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

  • What to do if cmd.exe will appear during the installation of windows 7?

    What to do if cmd.exe will appear during the installation of windows 7?

    I have my original installation disk to windows.
    After "Press any key", cmd.exe will appear and I don't know what to do.
    What should I type here?
    I tried also to advanced recovery method, but it can not read my drive...
    He said: "no installation disc valid." I tried to put it back, but it just doesn't work.
    What should I do?
    Thanks for your help :)

    Original title: Reinstalling windows 7

    At the Cmd box type: exit

    then press the enter"" key.

    J W Stuart: http://www.pagestart.com

  • After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

    After the execution of Windows 7 for 2 years that I now have a windows message facility is illeagal. Tried to reinstall windows, but the message is cannot install a previous version

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE21
    Code of Validation caching online: 0x0
    Windows product key: *-* - M892G - 84D7W-VYVVB
    Windows product key hash: 8URszDmqchXk0nyLWXx2jditWJE =
    Windows product ID: 00359-030-0078141-85521
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {656CCD50-41C9-41C3-968E-D29BBD46AA74} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0x00000000
    Build lab: 7601.win7sp1_gdr.120330 - 1504
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: 2.0.48.0
    OGAExec.exe signed by: Microsoft
    OGAAddin.dll signed by: Microsoft

    OGA data-->
    Office status: 100 authentic
    Microsoft Office XP Professional - 100 authentic
    OGA Version: Registered, 2.0.48.0
    Signed by: Microsoft
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program may Explorer\IEXPLORE.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

    Other data-->
    Office details: {A9BF75C2-FBF3-4795-953B-E259BD0C2131}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-VYVVB00359-030-0078141-855215S-1-5-21-1580701254-2691487138-3117158855HP-Pavilion,FK484AAR-ABA m9400tAmerican Megatrends Inc.. 5.33 20081107000000.000000 + 0009CE93307018400FA04090409Eastern Standard Time(GMT-05:00)03HPQOEMSLIC-CPC100100Microsoft Office XP Professional10roTAwuyn2K8JnfnZ5p70qCWUSww =54186-640-4025656-1742314 97728824C57890A

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00170-030-007814-01-1033-7600.0000-3102009
    Installation ID: 010516027730660442597094592351394511091775644602024082
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: VYVVB
    License status: licensed
    Remaining Windows rearm count: 5
    Trust time: 10-02-2012 17:32:36

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: n/a
    Beyond: 0x000000000001EFF0
    Event timestamp: 10:1:2012 07:16
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Altered the file: %systemroot%\system32\sppobjs.dll
    Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Altered the file: %systemroot%\system32\sppwinob.dll
    Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
    Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
    Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
    Altered the file: %systemroot%\system32\drivers\spsys.sys

    --> HWID data
    Current HWID of Hash: LAAAAAEAAAABAAEAAQABAAAAAgABAAEA6GFOQjaxCJyw9OJsCMr4P8RozDE =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0x0
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    HPQOEM APIC-SLIC-CPC
    FACP SLIC-CPC HPQOEM
    HPET SLIC-CPC HPQOEM
    MCFG SLIC-CPC HPQOEM
    LASRYVITRAGE HPQOEM SLIC-CPC
    GSCI HPQOEM SLIC-CPC
    SLIC SLIC-CPC HPQOEM
    SSDT HPQOEM SLIC-CPC

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us
    ----------------------
    Have you installed a new hardware or software since you started facing this problem?

    Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

    What Antivirus utility you installed?

    What's your date and time correct?

  • Windows XP mode virtual machine does not start after the upgrade to Windows 10

    Hello

    After the upgrade to Windows 7 Pro for Windows 10 Pro, my virtual Windows XP machine (which was created from the "XP" mode in Windows 7) no longer starts.

    It shows:

    This system is not allowed to run "Windows XP Mode". Now, the virtual machine will be turned off.

    How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

    VMware Workstation 12.1

    Hello

    How can I activate the Windows XP Mode in Windows 10 Pro? I mean, I have not lost my right to run Windows XP Mode, just because I've upgraded to Windows 10, right?

    I fear that the statement is pretty much on the mark.

    Microsoft caught only supported XP Mode in Windows 7, it has been since Windows 8.

    See also:

    https://support.Microsoft.com/en-us/KB/2724115

    You might be able to extract the folder integer vhd it and import it in VMware Workstation as a separate virtual machine. In the end, 'XP Mode' just was running a virtual machine in your Windows 7 after all.

    --

    Wil

  • Lightroom does not start after the upgrade to Windows 10, Version 1511, 10586

    Hi all

    After the upgrade to Windows 10, 1511 Version, lightroom 10586 CC can't be launched. Adobe cloud nor any link office or file system path to the files directly program. Lightroom.exe can be seen in the Task Manager for a second and then disappears to nirvana. No answer, no trace.

    What should do?

    standard things as uninstall - re - install, stop between the two, log out of the clouds - connect to the cloud, register of audit were made in several variants without success!

    Kind regards

    Robert

    Thank you hipolitorodrigues,

    your answer showed me the way. I found a solution more simple in a parallel thread, whose response brought back LR to life.

    CU, Robert

    8  re: does not start Lightroom CC

      

       Tanuj Sandal   14.12.2015 19:41 (als Antwort auf: antonk97314826)

    Go to the Panel, then programs and features.

    Please select Microsoft Visual C++ 2012, 2013, and fix it.

    Restart the computer and then let me know if the application works.

  • Could not find photos after the upgrade to Windows 7

    Bridge worked very well under Vista, but after the upgrade to Windows 7, I can't find one of my photos with bridge files.  Photoshop CS4 find them OK and made Lightroom, but for some reason Bridge does not list the sub folders.  If I click on libraries, he says "no file".  It does not list the pictures or my pictures.  I'm totally stumped.

    AlAugustine wrote:

    I tried all combinations of ctrl-click, click and ctrl, etc, I can think of but nothing reveals the reset box.  When I double click on the desktop icon, it loads almost instantly leaving no time to press ctrl before loading.

    One thing I did not mention, is that you must check that the bridge is already done in the background.  Open the Task Manager and click the processes tab and see if bridge.exe is listed.  If program so quit smoking.

    If you have the possibility of automatically loading at startup deck, I recommend that deactivate you in the Advanced preferences file.  It causes more problems than it solves.

  • Sierra crash when after the "sleep mode"

    My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

    I try to reset the SMC sama NVRAM but always crash.

    suggest to solve?

    Thank you

    When you say 'crash', what do you mean?

    Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

    You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

    You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

  • Suddenly cannot open new tab, immediately after an update of MSWindows7, or after the upgrade to Windows 10 - tired, all kinds of bugs, no luck.

    Never had this problem until what MS downloaded and installed updates (for Windows7). So I said I'm going to widows 10 because I thought anyway, so I did this - still cannot open a new tab, or by clicking on the tab '+' or 'ctrl + T.
    I spent about an hour going by most of the measures that have been provided by the support of Mozilla tech note and it did not help. I'm not going to create a new FF profile.
    I restart my PC, nothing helped. I chose "never" (I forgot the exact wording) on all the Plug Ins and then rebooted and this did not help. I have not loaded Extensions.
    I installed FF for Windows 10 just after the installation of Windows 10.
    I am a user of whether average PC.
    Thanks for any help you can give,
    Steve V.

    Dear cor - el,

    Now, I'm happy! Thank you very much.

    New tab works now. It is because of me running the first program malware that you listed above, Malwarebytes. I am grateful that you suggested it because I would not have thought that that would be the problem (because the problem occurred immediately after a MS Windows7 update.

    Anyway, thanks again for sharing your time and skills.,.

    Steve V.

  • HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

    Hi people!

    After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

    In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

    I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

    What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

    If you need more information, please let me know.

    Best regards

    Ty

    I just tried this driver and I still have sound after 6 resets.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

  • FN keys do not work after the upgrade to Windows 10

    Why the FN keyboard does not work after upgrade to Windows 10?

    FN keys are controlled by utilities and special tools of Toshiba. Usually after the upgrade to Windows 10, the parts of the pre-installed Toshiba software must be upgraded to version compatible and support Windows 10...

    You have not provided information on the laptop model so I can't say with certainty if your unit is 10 Windows supported or not...

Maybe you are looking for

  • Apps will not update

    My apps on my iPhone with the current iOS 9.3.1 5s will not update.  The message says waiting for updates as the icon next to the name of the app shows the circle with the square in the Center and nothing more.  It updated fine a few days ago, but no

  • Can't get Epsom printer Event Manager to "scan to email".

    Recently installed Epsom SX215 printer / scanner but impossible to activate the function "scan to e-mail". Everything else works OK. All the drivers are up to date. Epsom event Manger says "cannot find the scanner driver. Install the driver before us

  • DHCP-discover with HSRP

    Hello I have a general question about DHCP and HSRP. I configured two redundant CISCO routers with (active) address IP 10.0.0.2 and 10.0.0.3 (standby). Their virtual HSRP address is 10.0.0.1. When my clients send DHCP package to the DHCP server on th

  • Windows8.1 and videodriver HP Probook 470G 0

    Hello I've updated to W8.1, but I have problems with my videodriver/screen output. I have installed 8.1 now for the third time. The first and last time, everything went well, until I got the screen in w8.1, to accept the terms of Mrs. After that, I g

  • Test a REST based Web Service for Oracle R12.2.3

    Using the Oracle Support document,Installation of Oracle E-Business Suite integrated SOA Gateway, version 12.2 (Doc ID 1311068.1()I was able to deploy the REST web service based to FND_USER_PKG as FndUsrPkgSvc.I am able to view the file w.How once on