Windows8.1 and videodriver HP Probook 470G 0

Similar Questions

• ProBook 6545b: error light and start battery ProBook 6545 b

  In recent weeks, when I start my computer, in the upper left corner screen said the words "Boot Error". It does not, however. I can easily get out of it by pressing any key and it just starts.

  Can fix this easily?

  AND:

  also in recent weeks, when I stopped this computer, battery charge light flashes at a steady pace until the computer shuts down.

  What does that mean?

  For the record, I don't have a battery in this laptop because he died about 5 months ago.

  Hi @Jeff17866,.

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Even if it is a Commercial product, you can reset the BIOS with this document by selecting the reload the default BIOS settings. It would help if something is causing a problem with the default settings.

  I found this to be a contribution to this number on all laptops.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  The flashing of the battery is normal because it is looking for the battery on the laptop.

  I hope this helps.

  Thank you.

• G6-2366er Pavilion. My windows8 crashed, and my salesman does not give me disk with OS

  I know that the key is embedded in the bios, but the question is - how can I reinstall my windows? where should I download windows 8 distributive?

  do not restore - mention it does not at all

  Hello:

  You will probably have to order a set of HP recovery disks.

  Call them for the country that you live in the link below.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  You can also read this thread and see if the W8 OEM download will work on your laptop.

  See the response of Hüffer.

  http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/need-product-key/m-p/2592907#M96681

  I've done the drive and it works fine but I don't have a PC provided with W8, so I can't test if the key in the BIOS works, but I guess that's.

  Also, I don't know if this download is for any language. It is lacking in English and perhaps it's just that it can be.

• Audio problem and possible solution, probook 4530 s, Windows 7 64 bit

  Here is my variation on the theme "no audio".

  This laptop was purchased in early July 2012 has worked well for a few days, then there was no audio output at all - no speakers or headphones via browser, iTunes or any other application.  In Device Manager, I noticed there are two separate features in the 'audio controllers, video and game.  We're "IDT high definition audio CODEC" and the other is simply "high definition Audio Device."

  I searched this forum and tried many suggestions, including the update of the BIOS, driver uninstall/re-install and restore drivers - no luck.  Sometimes I'd get audio, sometimes not.  Now I have disabled the "high definition Audio Device" and this seems to have solved the problem.  I was doing an audio output for the last 24 hours, even after sleep and restarts.

  My question is this: can I just uninstall the "high definition Audio Device?"   This seems to be the origin of the conflict.

  Thanks for your help.

  You have a great day too, Howard.

  You can click on any post feel you better solved the problem. IMO, you pretty much solved yourself with your first message.

  I have to tell you what was the other audio device.

  Just click the box "Accept as Solution" black at the bottom right of any post.

  Best regards

  Paul

• NO sound on speakers and headphones HP Probook 4540 s windows 7

  all the drivers are installed properly... when I play a music thing Green didn't up and down through the high volume and low bar... but no sound... Troubleshooting detects no problem...

  You have a fluorescent lamp next to your computer which could be emitting a rf? This could interfere with the microphone.

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

  -----------------

  Also, make sure that the male end is completely pushed taken head phone or auxiliary.

• upgrade for HP probook 455 laptop screen full HD

  Hello
  
  I have a probook 455 and I wanted to know is there any screen full hd or hd + corresponding to this model?
  
  I think my lcd is like this:
  http://www.LaptopScreen.com/English/model/HP-Compaq/ProBook~455~G1 ~ (F2P93UT).
  
  and I read this link:
  http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/HP-ProBook-4540s-upgrade-laptop-screen...
  
  I want to know if other hp LCDs or other brands can be used? Help me if you know the full hd or hd + lcd model.
  in fact, I am not satisfied with contrast of 455

  Yes and no.

  Not as long as the computer and the components are designed to best suite with eachother. So manufacturers will not support using incompatible parts if custamization is accepted.

  Yes because there are technicians who can mix and match components but the combination must look and regular maintenance. I would not advise this as it can be found in failutes and questions.

  Workaround would be to buy a monitor (ecternal) HD and plug it in. There are n number of options in the HD monitor of your choice.

• URgent: How to install Skype for Windows8.01

  I'm using a laptop with Windows8.01 and she has Skype but it says I need to install the new Skype.

  If I try to install from the official page, but it takes time and no progress instalation.

  When I search "Skype" on the cell phone to "Seek", I see that laptops has Skype, but when I search Skype in the list of programs of the Control Panel, there is no Skype.

  You kindly told me how to fix this?

  Thank you very much in advance

  [Removed for privacy]

  Skype for Windows 8/8.1 modern app was disabled on 7 July last year and now to install the desktop version of Skype for Windows, you should:

  https://support.Skype.com/en/FAQ/FA34565/upgrade-now-to-Skype-for-Windows-desktop

  If the regular installer of http://www.skype.com/go/windowsdesktop.download does not work for you, then you can try with this installer for the version of Skype 7.17.0.105 currently last:

  http://download.Skype.com/MSI/SkypeSetup_7.17.0.106.msi

• ProBook 470 G2: Probook 470 G2

  Dear HP

  After the installation of Win 7, two unsolve problems

  1. a PCI driver cannot detect

  

  2. the function and F9 and F10 key cannot adjust the brightness of the screen.

  Please help to solve. I already try the solution below.

  • http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/ProBook-470-with-2-unknown-Devi...

  Hello:

  You need this driver for the dev of pci.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_146748_1

  Have you installed the applicable graphic driver for your laptop?

  You will not be able to adjust the brightness of the screen, unless the graphics driver is installed.

  If you have installed the graphics driver, then the only other suggestion I can offer would be to install the Hotkey Support driver if you have not already done so.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943843&swItemId=ob_154892_1&swEnvOid=4059

• HP Probook 640 G1 Radeon HD 8750 M Win 7 Pro x 64 driver failure

  (x-posted to Forums of consumer...)

  I have similar, frustrating problems with a brand new HP ProBook 640 G1 running Win7 Pro 64-bit.

  (see here for an original message RE: HP ProBook 650: https://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Probook-650-G1-Radeon-HD-8750M-Intel-HD-... )

  I did an install clean system and install the latest drivers from the HP site for this laptop.  When I installed the 8750 M AMD Radeon drivers on HP website (I tried both those of 02.17.2014 and 09.23.2013.), said the installation was successful, but when I restart the computer, the notification of Catalyst Control Center icon disappears after about 10 seconds, and when I try to access the CCC by right clicking on the desktop, I get the same error as the original message above.)

  I then did clean install from another and tried to install Microsoft .net Framework 4.0 software you suggested, before attempting to reinstall the 09.23.2013 AMD Radeon driver on the HP site.  Still no luck.  (And, incidentally, the 02.17.2014 installation package seems totally screwed to the top, because it installed the .net packages in English, Spanish and Portuguese, according to me, on my computer...)  I don't have not even tried to install the Intel video driver, because I wanted to see if the AMD driver install correctly (with the CCC) on its own.  No luck.  Same error: "cannot start AMD Catalyst Control Center.  Currently, there are some parameters that can be configured using AMD Catalyst Control Center. »

  I lost my weekend on this already.  Oh, and my brand new battery does charge more than 64%, even after a night or more and once again all the afternoon of charge today.  It's my laptop HP or Compaq 4th in 8 years, and this has been by far the worst experience I've had so far with a HP machine.  Most of the unfortunate.

  Well, isn't this interesting...

  Thus, HP tech came out today to replace the motherboard due to battery failure.  Indeed the battery in the new motherboard.  In addition, the new motherboard came with a new video card.  On a lark, I uninstalled the generic AMD drivers and tried to reinstall the version of HP from the HP Web site.  And, it worked this time, without any error AMD Catalyst Control Center!

  Thus, it seems that the motherboard buttocks was responsible for two battery problem and my AMD Radeon 8750 M driver woes.  Happy I arrived on-site service contract next business day!

• ProBook 440 G2: RAM Upgrade will void the warranty?

  Hello

  After a lot of dilemma, I buy THISlaptop.

  My main concern is the "on-site 5-year guarantee" it comes with.

  This laptop has now only 4 GB of RAM. I want to add an another 4 GB myself.

  In doing so, it will take Bay opening to service the laptop.

  Open myself for a RAM upgrade will void the warranty?

  In addition, no one knows how much total RAM this computer supports? How many slots is there?

  The page of the product didn't.

  I tried to contact HP technical support by email, and I have to enter a serial number to reach them. I entered the serial number of my laptop current (and also a probook), but I think that the agent did not read my email properly. Instead of answering my question, he sent me a link to extend the warranty on my laptop today.

  Thank you...

  Hello

  According to the Manual, it has 2 slots:

  

  See Page 2, 3, 47, 48, to get the instructions before and during the replacement process. Even if it is a simple procedure if you do not have confidence in replacement, it gives to the HP service center, they will do it for you. Opening the door to service memory will not void the warranty - but if you daamage something in the replacement process, it will void the warranty.

  Please get the exact configuration and preference of the same brand (like this one in the slot) of RAM, mentioned in the manual.

  You can run this toolto know the details of the installed RAM sticks & moving forward with the purchase of od sizes appropriate sticks needed to make it to 8 GB in total.

  Concerning

  Visruth

• HP ProBook 6540 b: administrator BIOS password

  Hello

  I changed the BIOS password on my laptop and forgot it... It brings up a keyboard on the screen after the third attempt. It shows system lockdown after entering on the OSK. Is there a way I can get help from HP to unlock the BIOS Admin password? How much time it will give me to try again because I rebooted and entered the password 100 s of time and I have entered the good one somewhere... After the first failure, he said: "enter the password again. Does that mean that authenticaton failed or should I try to enter the password again?

  I hope you can help!

  Fred

  Hi Fred,.

  See the solution of @REO51ST on the following link.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/ProBook-6540b-BIOS-locked/m-p/5519897/highlight/true#M329314

  Kind regards

  DP - K

• 4540 proBook s: help to the New Installation of hard drive recovery

  I had a bad hard drive crash. I installed a new and got the bios to boot from the cd drive, with windows 7

  orginal cd of installation in the drive.  He acknowledged drive 0, I clicked again in the options. He created a system partition.

  Installed windows 7 apparently very well. Inserted the recovery driver and application and installed disk. Everything seemed fine. This morning I turned it on and it the hard drive error (3F0) Please install an operating system. I shut it down and restarted, it seemed normal.  I installed a few programs, stop it again. Returned by, it starts again and it took me to screen diagnosis saying SMART Check - not installed and short DST - not installed...  Can someone tell me how to remove that partition and I can format the drive in a usb sata enclosure and try again.

  Please tell me the correct procedure to return this laptop running to a factory State. I have the original Windows7 and Windows8, Driver and Application for the two OS disks ' are...  I want to stay with the installation Windows7.

  Thanks for any help on this problem. I have no idea where I was wrong!

  It is not impossible that the new disk is bad, have seen before. It is also possible that the controller sata on the motherboard is bad, but I'd watch this last possibility. You can get an Exchange on the new hard drive?

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1

  Aspire e15 (e5-511-p9y3) Touchpad not working not not on windows8.1, and I can use the cursor with a mouse. I also installed the synaptics/elantech drivers but it does not show scrollbar option in the mouse-> device settings.

  SOLUTION

  So guys after a thorough research and troubleshooting, I found that you must keep the opinion of a few things at installation time:

  Installation mode: UEFI (only) - LEGACY would create problems touchpad.

  After the installation of windows just follow the hierarchy of driver installation

  1 Intel NB_Chipset_M Baytrail-M

  2 Intel i/o driver

  then the rest of the shit.

  Note: after doing all this make sure your touchpad is active > Fn + F7

  Just wanted to if this solution came from an Executive of acer, the world would have been a better place , but in any case this is what the community is for.

  Enjoy everyone

  [private under the leadership of life]

• Photosmart C3140: (Photosmart C3140) HP Solution Center does not work on my system after upgrading windows8.1

  When I try to launch the HP Solution Center, get the error like - "HP Solution Center cannot work because your device installation is not complete. Please connect the USB cable or re-run the Setup program from the installation to a network installation CD. "If it does not complete the installation, or you do not have the CD, access the HP help files by clicking on the Start Menu.

  HP Solution Center worked very well with Windows8. Windows updates updated Windows8.1 and Solution Center stopped Frank.

  Any suggestions to fix this? What is the Windows8.1 question upgraded or because of something else?

  Appreciate any help.

  Hello PradhanAK,

  You may need to uninstall the existing printing software.

  Restart the PC.

  Please, download and run the Installer printer HP www.hp.com/go/tools