Client VPN license

Similar Questions

• Client VPN license number

  I have a Setup AnyConnect and able to VPN in my office.

  I bought an ASA5505-SW-UL, which is unlimited user (UL) license, but now the seller tells me that:

  AoA you can seen the license unlimited is inside the hosts, rather client VPN is, by default, ASA 5505 included only 2 of the VPN client and can supported up to 25 of the VPN client, your license only default client VPN 2 look. If you need more VPN client to connect, you must purchase the license of additional VPN client.

  I wonder his TRUE/FALSE statement, because I thought ASA5505-SW-UL means unlimited license

  

  Thank you.

  You are welcome.

  AnyConnect Essentials and Premium cannot be active at the same time. So, when you add the license (activation key) for AnyConnect Essentials, it will deactivate the license premium 2 customer integrated.

  As long as you do not nay use premium features only, customers shouldn't see any difference when you change the license on your ASA.

• ASA 5505 SSL VPN license update

  Hi all.

  Our ASA 5505 with DATABASE default license allowing only 10 simultaneous vpn sessions (including 2 Anyconnect + IPsec). attached a TXT file with the license information. This Firewall is's use only for vpn access, and we less vpn tunnel vpn IPSec-L2L, anyconnect client SSL and IPSec client access configurations vpn to the top and race walk,.

  We are in terms of upgrading vpn license to archive IPSec 10 and 10 Anyconnect and 1 anyconect mobile VPN sessions in time. so my questions are;

  1. can I buy "ASA5500-SSL-10 =" accounting and to upgrade our ASA 5505 without having to buy "L-ASA5505-SEC-PL =" license of pus of security.

  2. asa use to upgrade only Anyconnect SSL vpn license while keeping 10 vpn IPSec comes with the base license.

  Thank you & you expects value comment

  Thank you

  JCK

  1. Yes.

  2.Yes.

  If you want to keep Clientless SSL VPN you do not want to continue with the addition of the ASA5500-SSL-10 = part. If you can do without client (including the conversion the two existing ones), more economically, you can opt for Security Plus and AnyConnect Essentials licenses. (US$ 800 vs price $1250).

  In both cases, the Mobile requires the AnyConnect Mobile (ASA-AC-M-5505) license.

• How to put all through traffic the easy vpn client VPN server

  Hi people

  I want to ask you, how to put all of the server the easy vpn client VPN traffic through.

  I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.

  There is the configuration up to now. Where is the problem?

  ROUTER1 #sh running-config

  Building configuration...

  Current configuration: 5744 bytes

  !

  ! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska

  !

  version 15.1

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  ROUTER1 hostname

  !

  boot-start-marker

  usbflash0:CVO boot-BOOT Setup. CFG

  boot-end-marker

  !

  !

  !

  AAA new-model

  !

  !

  AAA authentication login ciscocp_vpn_xauth_ml_1 local

  AAA authorization ciscocp_vpn_group_ml_1 LAN

  !

  !

  !

  !

  !

  AAA - the id of the joint session

  !

  Service-module wlan-ap 0 autonomous bootimage

  Crypto pki token removal timeout default 0

  !

  Crypto pki trustpoint TP-self-signed-1604488384

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 1604488384

  revocation checking no

  !

  !

  TP-self-signed-1604488384 crypto pki certificate chain

  certificate self-signed 01

  3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539

  32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D

  38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F

  528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75

  7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10

  D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5

  4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355

  551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301

  03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609

  2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101

  FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006

  CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403

  211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F

  E43934FA 3D62EC90 8F37590B 618B0C

  quit smoking

  IP source-route

  !

  !

  !

  !

  CISCO dhcp IP pool

  import all

  network 192.168.1.0 255.255.255.0

  DNS-server 195.34.133.21 212.186.211.21

  default router 192.168.1.1

  !

  !

  IP cef

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209

  !

  !

  username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1

  !

  !

  !

  !

  !

  !

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group customer isakmp crypto VPNGR

  vpngroup key

  DNS 212.186.211.21 195.34.133.21

  WINS 8.8.8.8

  domain chello.at

  pool SDM_POOL_1

  ACL 120

  netmask 255.255.255.0

  ISAKMP crypto ciscocp-ike-profile-1 profile

  match of group identity VPNGR

  client authentication list ciscocp_vpn_xauth_ml_1

  ISAKMP authorization list ciscocp_vpn_group_ml_1

  client configuration address respond

  virtual-model 1

  !

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  !

  Profile of crypto ipsec CiscoCP_Profile1

  security association idle time 86400 value

  game of transformation-ESP-3DES-SHA

  set of isakmp - profile ciscocp-ike-profile-1

  !

  !

  Bridge IRB

  !

  !

  !

  !

  interface Loopback0

  192.168.4.1 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  interface BRI0

  no ip address

  encapsulation hdlc

  Shutdown

  Multidrop ISDN endpoint

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  !

  interface FastEthernet5

  !

  FastEthernet6 interface

  !

  interface FastEthernet7

  !

  interface FastEthernet8

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  type of interface virtual-Template1 tunnel

  IP unnumbered Loopback0

  ipv4 ipsec tunnel mode

  Tunnel CiscoCP_Profile1 ipsec protection profile

  !

  interface GigabitEthernet0

  Description Internet

  0023.5a03.b6a5 Mac address

  customer_id GigabitEthernet0 dhcp IP address

  NAT outside IP

  IP virtual-reassembly in

  automatic duplex

  automatic speed

  !

  wlan-ap0 interface

  description of the Service interface module to manage the embedded AP

  192.168.9.2 IP address 255.255.255.0

  ARP timeout 0

  !

  interface GigabitEthernet0 Wlan

  Description interface connecting to the AP the switch embedded internal

  !

  interface Vlan1

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP 192.168.1.1 255.255.255.0

  IP nat inside

  IP virtual-reassembly in

  !

  local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245

  IP forward-Protocol ND

  !

  !

  IP http server

  local IP http authentication

  IP http secure server

  overload of IP nat inside source list 110 interface GigabitEthernet0

  IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389

  IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389

  IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21

  IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21

  IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390

  IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390

  overload of IP nat inside source list 120 interface GigabitEthernet0

  IP route 0.0.0.0 0.0.0.0 dhcp

  !

  exploitation forest esm config

  access list 101 ip allow a whole

  access-list 110 permit ip 192.168.1.0 0.0.0.255 any

  access list 111 permit tcp any any eq 3389

  access-list 120 allow ip 192.168.4.0 0.0.0.255 any

  !

  !

  !

  !

  !

  !

  !

  control plan

  !

  Bridge Protocol ieee 1

  1 channel ip bridge

  !

  Line con 0

  line 2

  no activation-character

  No exec

  preferred no transport

  transport of entry all

  transport output pad rlogin udptn ssh telnet

  line to 0

  line vty 0 4

  privilege level 15

  preferred transport ssh

  entry ssh transport

  transportation out all

  !

  Thanks in advance

  To do this you must make the following changes:

  (1) disable split Tunneling by deleting the ACL of your configuration of the client group.
  (2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.

  Edit: Theses are the changes to your config (also with a little cleaning):

  Configuration group customer isakmp crypto VPNGR

  No 120 LCD

  !

  type of interface virtual-Template1 tunnel

  IP nat inside

  !

  no nat ip inside the source list 120 interface GigabitEthernet0 overload

  !

  access-list 110 permit ip 192.168.4.0 0.0.0.255 any

  no access-list 120 allow ip 192.168.4.0 0.0.0.255 any

  Sent by Cisco Support technique iPad App

• VPN license

  Hello

  We design a solution for our client, they plan to connect 5 site to their main office, on the main office, they use CISCO2911, use of branch CISCO1921, so my question is:

  1, if I want to use IPSec VPN connect branch and headquarters, apart from the router, I just need to buy the security package, like SL-19-SEC-K9/SL-29-SEC-K9, no need to buy a SL-19-DATA-K9/SL-29-DATA-K9, I'm wrong?

  2, if I want to use SSL VPN connect branch and main office, aprt of the router and SL-19-SEC-K9/SL-29-SEC-K9, I only need to buy L-FL-SSLVPN10-K9 for CISCO2911 in the main office, no need to buy L-FL-SSLVPN10-K9 for branch as each CISCO1921 has two default SSL license?

  Thank you very much.

  1. Yes, you are right. You can only buy the security for IPSec VPN pack, that is to say: SL-19-SEC-K9/SL-29-SEC-K9 to the branches and principal respectively.

  2. No, if you want SSL VPN to CISCO1921, you also buy the SSL VPN license as on the router it does not come with the default 2 license SSL value. That the ASA firewall comes with license SSL by default 2. If you need complete SSL VPN on the Cisco1921, you can also buy the SSL license.

  You can see table 4 on the SSL licence by platform:

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6657/product_data_sheet0900aecd80405e25.html

  Hope that helps.

• ASA 5520 VPN licenses

  Community support,

  I want to run this question by you guys to avoid the sales of our partner CISCO and similar pitch more to the best solution that would give us what we want.

  We currently have a VPN from CISCO 3020 hub to terminate the Lan-to-Lan tunnels and have our mobile workers to connect through the client VPN CISCO (300 users-employees and contractors).

  Given that this device is coming to an end of LIFE this year, we bought a CISCO 5520 (here is the current licenses in this topic)

  Licensing seems quite complicated, so here's my question:

  -What VPN do you recommend for our users and entrepreneurs? I understand that the CISCO VPN client does not work with ASA 5500 Series devices

  Is there a license needed to deploy a VPN solution for our remote users(employees/contractors)?

  Thank you

  John

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited perpetual
  VLAN maximum: 150 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active/active perpetual
  VPN - A: enabled perpetual
  VPN-3DES-AES: activated perpetual
  Security contexts: 2 perpetual
  GTP/GPRS: Disabled perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: Disabled perpetual
  Counterparts in other VPNS: 750 perpetual
  Total VPN counterparts: 750 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: disabled perpetual
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual

  This platform includes an ASA 5520 VPN Plus license.

  Your understanding that the Cisco VPN client does not work with ASA is wrong. Maybe it's the version of Cisco VPN client that you use currently does not work with ASA. But these (and so not very new indeed) versions of VPN client work with the ASA. I installed for several clients who use the traditional IPSec VPN client with ASA ASAs and they work well.

  You are right that the granting of licenses for the SAA is complicated. Your tunnels IPSec VPN site-to-site will work on the SAA and pose much challenge in terms of licenses. But there are problems and alternative solutions to consider for remote access VPN clients. At this point, there are two major variants: you can use the classic IPSec VPN client or you can use the new AnyConnect client. From a licensing perspective there is a Hugh difference between them. It is not special license that applies to the traditional IPSec client and they are just against your license for peers Total VPN (for which you have 750 in your license). For the AnyConect there is a condition of licence. There is a premium for AnyConnect license and there are licensed AnyConnect Essentials. The Essentials license price is much lower than the premium license, but Essentials does not all the features that made the premium.

  In the immediate future, that it would sound like an easy question to answer, use the traditional IPSec VPN client for which theere is not a special permit and it is what you are used to. However Cisco has announced the dates of end of sale and end of Support for the traditional VPN client. If at some point you will need to use the AnyConnect client. I would say that if you make the change of the ASA that it might be a good choice to also adopt the AnyConnect client.

  HTH

  Rick

• Bought 2 new client access licenses

  I bought 2 new for our WINDOWS 2008 Server client access licenses. Try to install them, but no WINDOWS support says that we need a key... Is this true?

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How can demote us dynamics crm 2011 to use with dynamics crm 4.0 client access licenses

  We bought user Dynamics CRm 2011 under Volume License licenses, and we need to install the Dynamics CRM 4.0 CLIENT access licenses. We were informed that we need to downgrade the CAL.

  Would you know how dowgrade CALS?

  Thank you

  Hello RonRon03,

  If you are still having problems with Dynamics CRM 4.0 client access licenses, you can post in the below listed Ant.
  http://social.Microsoft.com/forums/en-us/category/Dynamics/

  There is a forum for Microsoft Dynamics CRM 4.0. They have experts who will be able to solve your problem.

  Thank you

  Marilyn

• A standard Small Business SERVER 2003 Server upgrade SBS Server 2003 R2 STandard requires the new CLIENT access licenses?

  I got a new server and the server only supports the SBS 2003 R2 and more. I have tried slipstreaming drivers and all that already, without success. I have SBS Server 2003 Standard now with 15 CLIENT access licenses. If I buy a copy of SBS 2003 R2 on ebay to get the installation done, Microsoft requires new or different CLIENT access licenses or licensing of the R2 or 2003 SBS CAL upgrade existing will be sufficient? Any info would be much appreciated!

  Thank you

  You can find the Windows Server on TechNet support at the following address: http://social.technet.microsoft.com/Forums/en/winservergen/threads

• The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp

  Hello

  I have Windows server 2003 I have the server license terminal server, but one of my XP machine, which I'm calling his error remote desktop by giving as below
  The remote session was disconnected because the local computer client access license could not be upgraded or renewed on Windows xp.

  Thank you
  Deepak Labonté.

  Hello annelabonnote

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2003 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Can I have a copy of KB2982791? My client VPN application

  Original title: Please, please, please can I have a copy of KB2982791? My client VPN application

  Yes, I am aware that MS has w / drew this patch.

  However, I don't have the choice. I SHOULD have the patch and am willing to take the risk. My client is a Government, and their VPN is administered by people who insist that I have this patch in order to do my job.

  Can I PLEASE have the patch? If my system has problems, I'll take the risk. I can't change my client--their admins VPN will ALWAYS REQUIRE MS PATCHES, even if MS released their.

  I implore anyone who wants to hear it.

  Computers belongs to me - I'm an entrepreneur owner unique to Montgomery Co. MD [whose] VPN is administered by people who insist that I have this patch in order to do my job.

  Well, I'm afraid that you are between the proverbial rock and hard place, my friend.

  KB2982791 was "fired" shortly before midnight (Pacific time) on August 15, 2014. KB2982791 is no longer available through Windows Update. KB2982791 is no longer available via the MS Download Center or from the Microsoft Update Catalog. In addition, Microsoft informed uninstall KB2982791 if it is currently installed.

  If the admins of the County cannot understand the FAQ update on this page...

  
  Why this bulletin has been revised August 15, 2014?
  Microsoft revised this bulletin to address known issues related to the installation of security update 2982791. Microsoft is investigating the behavior associated with the installation of this update and will update this bulletin when more information is available. Microsoft recommends customers to uninstall this update. As an additional precaution, Microsoft has removed the 2982791 security update download links. For instructions on how to uninstall this update, see Microsoft Knowledge Base Article 2982791.

  .. .you need to slam a few heads together (or contact their TAM Microsoft).

  I suspect upgrading kernel (MS14-045) re-Mode drivers - will be released very soon (for example, early next week?), probably under a new KB number. [Those who say cannot know & those who say can't know.]

  Good luck on Monday morning!

  PS: Here is the consumer, specific peer-to-peer support forums. You'd better post in Win7 IT Pro-specifiques forums-online http://social.technet.microsoft.com/Forums/windows/en-US/home#category=w7itpro [or in the forums partner if you are a MS Partner]

• Client VPN connectivity problems

  I use the cisco VPN client to connect to our network, located behind a 515E. The client is authenticated and gets an ip address but cannot ping or connect with one of the hosts. The connection is to a network of customers that is also behind a 515E. I have successfully connected using the same policy to other places and have had no problem. What confuses me, is that we have used to have a Netscreen firewall before and he had a netscreen vpn client which connected since their network with a problem. Is that something they need for their firewall so that we can get through the traffic?

  Try to turn on NAT - T on your pix, by setting up:

  ISAKMP nat-traversal 20

  and configure the client vpn accordingly:

  http://www.Cisco.com/warp/public/471/cvpn_3k_nat.html#conf_client

  I think these discussions are useful:

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=virtual%20Private%20Networks&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7dda4

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=virtual%20Private%20Networks&topic=General&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1dd7fe80

• Definition of domain DNS client VPN

  This seems to be a simple question, but I have difficulty finding an answer. Connect to a VPN 3000 using the client VPN Cisco 4.0. Is there a setting that I can do on the 3000 that will set the domain name DNS on the client. I have it plugged into the hub and he gave me an IP address, the list of list of WINS servers, DNS servers,... but it has not defined the domain name for the connection. Is this possible?

  Thank you

  Greg

  Configuration - users - groups - Client Config - default domain name management

• The VPN client VPN connection behind other PIX PIX

  I have the following problem:

  I wanted to establish the VPN connection the client VPN to PIX on GPRS / 3G, but I didn t have a bit of luck with PIX IOS version 6.2 (2).

  So I upgraded PIX to 6.3 (4) to use NAT - T and VPN client to version 4.0.5

  I have configured PIX with NAT-T(isakmp nat-traversal 20), but I still had a chance, he would not go through the 1st phase. As soon as I took nat-traversal isakmp off he started working, and we can connect to our servers.

  Now, I want to connect to the VPN client behind PIX to our customer PIX network. VPN connection implements without problem, but we can not access the servers. If I configure NAT - T on the two PIX, or only on the customer PIX or only on our PIX, no VPN connection at all.

  If I have to connect VPN client behind PIX to the customer's network and you try to PING DNS server for example, on our PIX, I have following error:

  305006: failed to create of portmap for domestic 50 CBC protocol translation: dst outside:194.x.x.x 10.10.1.x

  194.x.x.x is our customer s address IP PIX

  I understand that somewhere access list is missing, but I can not understand.

  Of course, I can configure VPN site to site, but we have few customers and take us over their servers, so it'd just connect behind PIX VPN and client connection s server, instead of the first dial-in and then establish a VPN connection.

  Can you please help me?

  Thank you in advan

  The following is extracted from ASK THE DISCUSSION FORUM of EXPERTS with Glenn Fullage of Cisco.

  I've cut and pasted here for you to read, I think that the problem mentioned below:

  Question:

  Hi Glenn,.

  Following is possible?

  I have the vpn client on my PC, my LAN is protected by a pix. I can launch the vpn client to connect to remote pix. Authenticates the vpn client and the remote pix makes my PC with the assigned ip appropriate to its pool of ip address.

  The problem that I am facing is that I can not anything across the pix remote ping from my PC which is behind my pix. Can you please guide me what I have to do to make this work, if it is possible?

  My PC has a static ip address assigned with the default gateway appropriate pointing to my s pix inside interface.

  Thank you very much for any help provided in advance.

  Response from Glenn:

  First of all, make sure that the VPN connection works correctly when the remote PC is NOT behind a PIX. If that works fine, but then breaks when put behind a PIX, it is probably that the PIX is PAT, which usually breaks IPSec. Add the following command on your PIX VPN client is behind:

  fixup protocol esp-ike

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/df.htm#wp1067379 for more details.

  If it still has issues, you can turn on NAT - T on the remote PIX that ends the VPN, the client and the remote PIX must encapsulate then all IPSec in UDP packets that your PIX will be able to PA correctly. Add the following command on the remote PIX:

  ISAKMP nat-traversal

  See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312 for more details.

  NAT - T is a standard for the encapsulation of the UDP packets inot IETF IPSec packets.

  ESP IPSec (Protocol that use your encrypted data packets) is an IP Protocol, it is located just above IP, rather than being a TCP or UDP protocol. For this reason, it has no TCP/UDP port number.

  A lot of features that make the translation of address of Port (PAT) rely on a single to PAT TCP/UDP source port number ' ing. Because all traffic is PAT would be at the same source address, must be certain uniqueness to each of its sessions, and most devices use the port number TCP/UDP source for this. Because IPSec doesn't have one, many features PAT fail to PAT it properly or at all, and the data transfer fails.

  NAT - T is enabled on both devices of the range, they will determine during the construction of the tunnel there is a PAT/NAT device between them, and if they detect that there is, they automatically encapsulate every IPSec packets in UDP packets with a port number of 4500. Because there is now a port number, PAT devices are able to PAT it correctly and the traffic goes normally.

  Hope that helps.

• Client VPN does not install

  Greetings,

  Try to install the VPN clinet version 5.0.07.0290 on WinXP box.

  Gets to a certain point then - error

  Error 27850.  Unable to manage the network components.

  The corruption of the operating system can prevent installation.

  I asked this question here before - and received responses instructioning me to uninstall the client.

  This canoe do since there is no element installed in Add / Remove programs to point to uninstall.  I deleted the folder created, but it makes no difference - each time the system stops at the same point.

  Any other ideas?

  Is your Windows XP 32-bit or 64-bit?

  There are 2 version of VPN Client 5.0.07.0290:

  32-bit: vpnclient-win-msi - 5.0.07.0290 - k9.exe

  64-bit: vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  Please, please make sure you use the right software.

  Here are the steps that will allow the uninstall:

  (1) remove the VPN Client (any version) of the machine using the MSI cleanup tool
  http://support.Microsoft.com/kb/290301

  Updated the DNE using this deterministic networks link
  http://www.deterministicnetworks.com/support/dnesupport.asp

  Run the WINFIX application, then the upgrade DNE.

  (2) take a backup of the registry.
  (3) on your desktop, click Start > run and type regedit.
  (4) delete the following keys:

  (a) go to HKEY_LOCAL_MACHINE > SOFTWARE > Cisco Systems > customer VPN.
  (b) go to HKEY_LOCAL_MACHINE > SOFTWARE > deterministic networks and remove the keys.
  Note: Sometimes the system will not allow deletion of this key.

  (c) go to HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > uninstall > {5624c000-b109-11d4-9db4-00e0290fcac5}.
  (d) delete all the old files deterministic NDIS Extender (DNE): all files starting with DNE, as all are coming files and Client VPN facilities.

  dne2000.sys %SystemRoot%\system32\drivers
  dne2000m.inf and dne2000m.pnf of %SystemRoot%\inf

  (e) the enumeration of original manufacturers of hardware (OEM) of the dne2000.inf and dne2000.pnf files.

  The OEM enumeration .inf file is a file called ".inf oem (digital value)."
  For example, oem2.inf and oem2.pnf.

  Note: Be sure to remove only the DNE OEM files.

  dneinobj.dll % SystemRoot%\system32. You may need to reboot for this file can be deleted.

  (f) delete the following file: cvpndrv.sys to %SystemRoot%\system32\drivers

  (5) reboot the machine.

  (6) find the file CSGina.dll in the system32 folder rename it to CSGina.old

  7-restart the machine.

  (8) to disable any firewall if not installed.

  Hope that helps.