Clip + - all of a sudden no radio option available?

Similar Questions

• Why can't we simply have an option to turn Javascript on the sites again in the settings of Firefox 27? All of a sudden my Gmail attachments will not be opened. Gmail.

  All of a sudden my Gmail attachments have stopped opening, and I got the message: JavaScript must be enabled so that you can use Gmail in standard mode. However, it seems that JavaScript is disabled or not supported by your browser. To use standard view, enable JavaScript by changing your browser options, then try again.

  I found a Mozilla support thread where he explained that Javascript has been disabled for a while OK and next... Then, there was a complicated answer about how you could always turn it back on by typing in a code to config in the address bar. What? Or, you can download an extension to do this for you. Why?

  Please - if you really feel that users can not be trusted, and Javascript must be turned off, at least bring back the ability to turn Javascript on or off, on a basis by site in the options, without having to know the code. It's Gmail.

  Thank you.

  Thank you, guys. OK, thinking about has no sense. So I decided to solve all aspects. I think now that several attachments, sent to me by a client are corrupted to its end. Open attachments from several other people! So sorry to waste your time and very sad I lost many of my friends. I think this thread should be deleted. Thanks again.

• Use CS5 on MacBook Pro.  All of a sudden the 'Feather' effect does not work.  The normal options do not appear.  Must use "Esc" to continue to work on the project.

  Question: I use Illustrator CS5 on my MacBook Pro.  All of a sudden I lost the functionality with the 'Feather' effect - the usual options are not displayed and I have to type "Esc" to continue.

  Do you have two monitors in use at the same time? What you describe happens if the dialog box opens off the screen. You may need to reset your preferences. Use Cmd (Ctrl) - Opt (Alt) - shift on a restart of the AI.

• clips have to be resized all of a sudden

  Hello

  I am quite puzzled. All of a sudden I have to resize my videos when I shoot them in my editing, they are too big. It's a lot of your time to say the least. I do not have to do this, then I wondered if maybe I clicked on something that I'm not aware. Someone had this experience before.

  Thank you

  ruez

  If the clamps are too big, your sequence does not match the clips.

  This, to get a corresponding sequence of your film.

  

• Why all of a sudden you open PDF from Outlook in Firefox? How to disable this option?

  Everything was fine and now all of a sudden when I get an email from work in Outlook, it does not open in a separate window from Adobe. Now, it opens as an additional firefox tab. I don't want to do.

  Help, please.

  Hello

  All PDF files now open in Firefox? If Yes, then it seems that you have changed your default programs in Windows.

  If you have a PDF file that is saved on your computer at your fingertips:

  1. Right click on properties and PDF
  2. Under the general tab, next to "Open with" is probably Firefox, click on the button 'change '.
  3. Select Adobe Reader, and then press 'OK '.

  Alternatively, if you do not have a PDF file on your computer:

  1. Go to start > Control Panel > default of programs
  2. Click on associate a type of file or Protocol with a program
  3. Scroll down to find the file type ".pdf".
  4. Click on the ' Change program... "button. »
  5. Select Adobe Reader, followed by 'OK '.

  I hope that suits it for you.

• all of a sudden, I have in my 'Power Option Properties' toolbar, I can't get the icon to close & disappear

  I didn't double click on it, since ive never seen b/4, so I can't see what it is.

  what I don't know is why she appeared to top all of a sudden & how do I get it

  off my toolbar.

  Did you go to view, toolbars and not this toolbar?

  Have you gone to tools, manage add-ons and disabled this add-on?

  Please answer a few questions - what is the brand and model of the pc, current antivirus, operating system and service pack?

  Also to ensure that your system is free from infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  Please answer back with results and responses.

• I can't "save under" all of a sudden and I need this option works in my work.

  I can't save my PDF files "save under" all of a sudden - please advise.

  Since this is a secure document, the button "save under" is probably gray because of the security settings. To see what is limited, look at the "Document Summary of Restrictions" box on the Security tab.  A password to limit the actions of a user can do with the PDF (between opening the file to make changes to the file and therefore, no "save under"). These parameters should be actively requested by a person, more generally the author, but anyone who has unlimited access to a file can apply security settings.

• All of a sudden launch Airport utility

  Lately when I wake my iMac Airport utility is in place.  Everything is green and works normally.  I know my wife WiFi worked very well all day.  When she was online every minute awake I would like to know a few seconds if there was a little problem with WiFi.  So why APU launches it self all of a sudden?

  If the utility port air app is corrupt, the issue: click go > hold down the option key and don't release > library > Preferences > right click on com.apple.airport.airportutility.plist and move it to the trash.

  The apple logo reboot & empty trash.

• Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format.

  Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format. I run XP and use Firefox 9.0.1.
  Thank you...

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Why is not able to open new tabs in Firefox all of a sudden?

  Recently, I installed an update of Firefox and now all of a sudden, I can not open a new tab using the button '+' on the side of an open window, or in the option "file/new tab", or "ctrl + T" button combination. I can, however, open the link in a new tab, but I can't open just a new tab - there must be a link. How to remedy? It worked before the upgrade.

  The Ask toolbar is originally only in versions of Firefox 3.6.13 +. Uninstall this extension.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Cannot crop all of a sudden in preview

  I was just a preview photo editing and all of a sudden all the files I open already has "rectangular selection" checked. 'Culture' is grayed out. I can't uncheck the rectangular selection or choose another option to change.  I don't know what happened. Someone at - it ideas?

  It may be useful as you mentioned the versions of your operating system and application overview.

  For each preview version I've worked with, you use the "Rectangular Selection" tool to select part of your image, then on crops from harvest to this selection tool. (If the harvest menu item is grayed out unless you have made a choice which you can crop.)

• HP6600: HP6600 all of a sudden do not print

  All of a sudden my HP6600 printer does not print.  Connect wirelessly to my home network without problem with an IP 192.168.0.8.  Computer IP is 192.168.0.2.  All two subnet is 255.255.255.0.  Cannot ping the printer on the network but can ping other devices.  DSL modem/gatgeway changed recently, but all other network functions work correctly.  Have you checked the DSL modem/gateway config and everything seems OK.

  Printer will print the pages of internal test without problem.  Pinter said that he is connected to the network.  Scan Doctor can't find any problems and has not fixed the problem.  Printer and printer driver has been uninstalled completely and the driver has been downloaded and installed on HP website.  Still did not fix the issue.

  Printer is not reachable through browser by IP.

  Strangely enough, my can Android phone to Fing ongoing enforcement see and ping the printer with no problems, but cannot ping the computer.

  Computer is connected to the router.  Printer wireless to the router.

  Help, please... I'm out of options here...

  I ended up solving the problem on my own.  When the new modem/access point was installed, I put the security active wireless for WPA-2 personal with AES and TKIP.  Don't know why, but the TKIP was the origin of the problem.  I changed the AES security only, and the problem is solved.

  Now, printer works properly and is considered by my other devices my network wireless and wireline portions.

• Some keyboard keys have stopped working all of a sudden

  Hello world

  Some of my keys on my laptop keyboard stopped working all of a sudden. I don't know if I accidentally pressed something or if it is something to do with the FN keys, but I'd love to help if someone might be able to!
  Keys does not:

  Question mark and the slash key
  the last letter of the alphabet key
  the arrow keys
  and the 0 on the right side of the pad numbers

  Doesn't that sound like something to do with some settings or my keyboard does not work

  Thank you in advance for help! :)

  I can't say for sure, but I think that it has nothing to do with the settings. It is unclear to me that there is an option where you can disable certain keys on the keyboard.
  To be honest, I think it's a malfunction of the keyboard.

  > arrows
  Enter the BIOS settings and check if these keys work in the BIOS.

• Equium - colors of the screen change all of a sudden

  For no discernible reason my colors screen changed recently.

  When that I start the laptop, it starts in normal colors of Windows Vista. I log in, the colors are OK. As start programs, the colors change all of a sudden screen is almost entirely yellow and extremely difficult to read.
  I have updated to Vista SP2 and IE 8 in the hope of a miracle, but nothing changes. I uninstalled most of the software outside of Toshiba stuff, still not good.
  My CD player stopped opening (problem earlier) so I cannot reload backup of the system. Help!

  Wait a moment geo.

  As a first step if you want to test with external monitor use FN + F5 key combination to switch the desktop on the external monitor. Please, do it and let us know if the situation is the same.
  Drive HARD install or repair option doesn't exist on old Equium A100.

  Then, test it with external monitor and display the result.

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.