Clip + no longer lights... Details

Similar Questions

• Re: Satellite 2455-S3001 - LCD no longer lights

  I have a Satellite 2455-S3001 part #PS245U-074966. The lcd screen no longer lights upward.

  I can look at the screen and see the screen works (with a flashlight, I can see images on the screen). I want to solve this problem, but have never worked on display like this before problems. Before, I looked at this problem and what I've gathered, is that it might me a converter fl (forgive me if this is not correct, it's been over a year I did research).

  I would like a definitive answer and not one, perhaps, money is tighter than it used to be.
  John

  When you say converter do you mean FL inverter. Do you have?
  In my view, FL inverter is faulty.
  Have you checked some online shops for a new game?

• HP Pavilion DV6-3014TX no longer lights

  Hello

  I have a HP pavilion dv6-3014TX.

  My brother has spread very little water on it. Now it no longer works.

  When I plug in the adapter, it used to be a white light flashes, indicating that the power is running. Now, this light is dead, what is the average power is not coming into the laptop.

  I tested the adapter, nothing wrong with it.

  I completely took apart my computer. I already did this time several before, dv6-3014TX has overheating problems and needs a lot of cleaning maintenance.

  The under keyboard was mainly wet. But noting appears to be damaged on the inside. I cut the water and back up my laptop. But same problem: the computer turns on, light still dead.

  I think the problem comes from the port where you plug in the adapter. It seems broken because of water poured around it.

  This can be changed very easily. But I can't find where to buy it.

  THX!

  Looks like it's toast.

  If you are looking for, try PartSurfer HP: http://partsurfer.hp.com

  You can also find parts in the interview Guide & Service: http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf

• Dell XPS 710 no longer lights.

  Hello

  My Dell XPS 710 can no longer be run on more.   Whenever the power supply is on, I hear a click to food, but nothing happens nothing works at all, except a light flashing on the front and solid amber light on the motherboard. .  Help, please.

  Thank you

  The question went after the installation of new acquisitions 1000W PSU.  Also open the old power supply.  Took a few pictures.  See nothing obviously wrong.

• Satellite - only no longer lights

  Last night our new Satellite computer has stopped working. Tried to restart.
  Held On / off for 10 seconds, plug plug out and the battery for a few minutes and tried again.

  It would seem is powered, as 1 and the Middle LEDs are lit on the front of the computer.

  When I press a stack button light goes orange then to white, and computer will not start.

  Any ideas?

  Hi Al Hendo!

  Can you please tell us what Satellite phone you have exactly?

  I m do not know what it is because I m not a technician for laptop, but I think that this problem is hardware related and you need professional help of an authorized service provider. Technicians can repair the laptop for you.

  I'm pretty sure that an ASP can help you more than the users here. ;)

• Portege Z30-A-1FL no longer lights

  Hello world

  My Portege Z30 almost nine no longer starts. There is only a single flashing bright white - one for DC/battery - but other than that: nothing happens :(

  What can I do?
  Thanks for your help and your support.
  BA

  Sorry to hear that

  Portege Z30 is very nice, good looking for Ultrabook and as far as I know the laptop battery isn't removable t s. So the work around common that remove battery and pressing/holding the power button 30 sec long isn t possible.

  In any case, I guess that s portable began to hurt function and localization of the fault will not be very easy. The mobile engineer would generally use a special and software diagnostic test to know what could be the problem exactly.

  From my point of view the question could be linked to the memory problem or malfunction of the motherboard and I guess that both parties should be checked for possible problems.

• Satellite A300 - the word Satellite no longer lights

  Hi, I have a little problem with my laptop A300. On the lower left corner of the laptop, it says the word Satellite. It is still used to brighten up this time for some reason any, that it doesn't. I change all the parameters that have made this place. Did the light die on me already after less than 4 weeks? Or maybe there's a way to turn? It's obviously something small, but it irritates me.

  Thank you.

  Good news!

• New Ipod Touch no longer lights

  My daughter received a 32 gb iPod Touch for Christmas.  It was a gift from her grandparents, and I did not keep the original packaging.  It was as a champion of work until today.  It does at all.  I thought the battery was dead and tried to load.  Nothing. Connected to the computer and nothing.  A ran the diagnosis via iTunes, and it shows no device recognized.  Now what?  I'm worried, that I do not have a warranty claim because of not having registered the device & or throw the original packaging.  We only had this unit since December 26.  This is the newest model of the gen 6.  I think that it is up to date on software, or at least not far behind. Advice?  I can take it to the Apple store?

  Thank you very much!

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

  You can check your warranty coverage by entering your serial number here:

  https://selfsolve.Apple.com/agreementWarrantyDynamic.do

• My keyboard no longer lights

  My keyboard no longer turns upward. I have turned off accidentally. How to turn on my keyboard to the top?

  Hello

  Check with your system manufacturer support, their books online and ask
  their forum (if any).

  Many models have controls for the backlight keyboard in the BIOS - often
  F2 as you start so watch the display. Some may have shortcuts keyboard or other control
  it turn on or off.

  Of course, there may be a hardware problem however check that the controls would be
  the first step in best.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Laptop keyboard Toshiba no longer lights

  Can the keys on my keyboard used to light up when I used them so I didn't have to have a light type or see the keys, but now they don't light up and I don't know that it's just a thing of setting or a wrong key I hit by mistake - anyone help?

  Can the keys on my keyboard used to light up when I used them so I didn't have to have a light type or see the keys, but now they don't light up and I don't know that it's just a thing of setting or a wrong key I hit by mistake - anyone help?

  Look at this thread for an answer, but you might need to check with Toshiba on your question:

  http://forums.Toshiba.com/T5/computers/CT-p/c_laptops

• My WUSB54GC no longer lights!

  Hello! I just bought this usb Wireless today and tried 2 or 3 times to be able to connect with my router (D - Link DIR-601) but for some reason any did not, until the small usb did not have the green light flashes... and when I reconnected to my Windows XP he rang his mistake... and I continued to have this message from the wireless Assistant has not connected correctly or some thing... and I have to run the setup wizard again... * facepalm *.

  PLEASE DON'T TELL ME THAT I BOUGHT THIS THING TO WASTE MONEY!

  IS THERE A SOLUTION TO THIS? PLEASE TELL ME!

  SOLUTION! :

  I got it! This is because IT is DISABLED! O:

  SO here it is!

  1.) open Control Panel (Start-> Control Panel)

  2.) then go to performance and Maintenance

  3.), click System

  4.) click on the Hardware tab

  5.) click on Device Manager

  6.) go to the networks and if you see the x on it then click on it

  7.) it will say it is disabled, go ahead and allow it to

  DONEEEEEEEEEEEEEEEEEEEEEEE! hour

• The new smartphone blackBerry curve no longer lights

  I have a curve from BB for 3 weeks.  Works fine no problem, no exposure to moisture or extreme conditions.  The battery was ok - at 1/2 load yesterday evening when I got home and the phone was, I'm pretty sure, lit with locked keyboard (which is usually how I got it).

  This morning it was off - I thought that the battery just drained but it seemed strange.

  Were load via USB on and outside all day.  The Red led lights up when I plug the USB charger and remains stable (not flashing), even after I get out.

  Have tried now hold power for 10 seconds and more than 10 seconds, for less than 10 seconds.

  Have tried to remove the battery and put it back.  No loading, no white screen screen, screen just empty and dark.

  Thanks in advance!

  Resolved: I updated the operating system and reinstalled following the directions very useful to crackberry.com and Blackberry is LIVING

  Thank you 1000 times more!

• After the failure of snapshot on WS11 can no longer light station: inconsistency of Config file somewhere. How turn on now?

  Yes, I always use WS11, suites my thin QA purposes. Yesterday I realized that I had not taken snapshots of an important forum and has attempted to do. Well, I could have the computer always on when I clicked snapshot (OH!)  and she has not (although a snapshot file has been created). This is now, when I try to turn on the machine, I get a "file not found: M_Windows7_1.vmdk.» The correct name of this config file is VM_Windows7_1.vmdk, so somehow that the V is lost in a backup. I can't find any file to edit with the missing V. No idea how I'm going to bring this machine very important back working again? Is this something in the config of the snapshot file? I don't want to go delete stuff without knowing the consequences. Maybe it's as simple as put the snapshot files in a folder and see if it lights? Please let me know what other info you can have files of newspapers, etc.  I start to panic.

  Thanks in advance!

  So, there is no more recent log file in the folder of the virtual machine?

  It's really a weird question. Since you do not have a backup, please remove the virtual machine from the library of VMware Workstation (don't remove disk). Then create a new directory on drive G: (e.g. "VM_Windows 7_1" and move this directory VM_Windows 7_1.vmx and VM_Windows 7_1.vmdk .) After that, remove the *.lck files and move all other files related to the virtual machine to another (temporary) folder, so that the root of G: drive does not contain the files of the virtual machine again. After that, open the . VMX file from the file menu of the VMware Workstation and try to turn on. The only message you will receive is a question of if the virtual machine has been moved or copied, where "moved" is the answer in this case.

  André

• . AVI clips no longer listen to extracts

  So, I was working with a video project where I had to use the mp4 and avi files and all first it worked fine but after re entering the project files and record avi will no longer appear in the preview window. I'm kind new to the present so any help would be much appreciated.

  OK, I found a solution. I made a dummy project and open the same file in there and then returned to my old project and files rendered and previewed correctly! I appreciate your suggestions Ann!

• Short clips of long shots and file management using

  Hi all

  I am self-taught with PP and it feels like something important, that I missed along the way.

  When I suddenly that was say 60 seconds and I only use 1 second of it in my calendar, I want a way to be able to remove the other 59 seconds of my hard drive.

  I could make out the second clip and re - 1 manually import, but it's one of those things, I hope that there is a better way, some smart feature?

  It would be useful to my disk space without end!

  Thanks in advance

  Maybe the functionality of the project manager in the recent updates of CC will help out you

  Adobe Premiere Pro help. Copy, transcode or archive projects