clip will not be rendered

Similar Questions

• Staples will not be rendered?

  A few clips in a particular project will not be rendered.  Clips on either side rendered fine.

  If I resize or move clips no... always made does not seem them not being made previous.  'Delete project made Files' seems to where it was (under 'file' in the menu).  I was wondering where it can now be found?  Or what else could happen?

  Ben

  Make sure the project is selected in the browser, and then click the file menu drop-down.

  

  Russ

• Not will not be rendered and export audio?

  Whenever I visit the clip, the clip plays fine but the sound is not there. I checked several times if audio has been set for rendering, but it isn't still here on the video renderer. Why?

  Version: Adobe After effect CS6 (2015)

  There is a really annoying bug in the version of After Effects 13.5.1 where it will not be rendered audio in AVI or WAV format. You have three options:

  • Make a MOV
  • Rendering using Adobe Media Encoder
  • Open your project in 2014 CC file to render (bonus: you can render with multiprocessing can be faster)

  Oh yes, or you can wait until the update is scheduled for the end of the month. So... oven solutions, but that last seems like a fool.

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• Clip will not play when AC load via USB

  Hello

  I took delivery of my Clip to use permanently connected to an electrical outlet using the USB cable that is supplied with an adapter that plugs into the socket.  It is just a 3-prong plug with a USB plug on this subject.

  When you plug the clamp, it just cool and will not play.  I tried to search for other experiences, but no one is using this power supply solution.  Can anyone help?

  Thank you

  Steve

  Hmm.  There must be something weird on your USB AC adapter.  As long as only the two outside pins USB connected (these are the power pins) the player should load but still works normally.  The player charge if inside two pins are connected (the data pins).  Normally the inner pins are connected only when it is plugged into a USB port that is real.  Your card must provide a voltage on the data pins as well.

  You can sometimes get around by pluggin only the USB port for computer/AC adapter at halfway as the power pins connect before the data pins.  Or you can use the tape or paper to block the internal pins.

• Dynamic binding will not be rendered, does not connect to the server, CC 2014, 2015 CC

  Hi all

  I tried to contact Adobe support on this issue, but after spending 50 minutes trying to explain to the rep what dynamic link, the cat no longer works, so I am posting this here!

  I'm on a Macbook Pro 2013, OS X 10.10.5 2.4 ghz + 16 GB of RAM and I run out of problems with links dynamics in CC 2014 and 2015 (both fully updated) - it is important to note that it has never worked properly , but in the past a few reboots, revision or import the model in a different way has finally worked.

  In recent weeks, whenever I try to make a model in Media Encoder, it fails to connect to the server of dynamic links - this happens when you add to the queue of EI (it adds the comp, but won't connect, once I hit rendering) or when you import directly from Media Encoder (sometimes he manages to read the project add the model file and then fails to connect).  The error log says "cannot read from source, it can be moved etc.".

  I tried the following:

  Pass all plugins (I don't have that some installed Trapcode plugins and a couple of old plugins of the trial) of '... common library' for the plugin in the application folder.

  Clear cache of AE and me.

  Disable the firewall.

  Test with very basic compositions.

  Reset me.

  Nothing works and make the files without loss of EI (10-200 GB) becomes impractical and blocks until the AE for hours - nobody knows what might help others to reinstall everything (very slow internet connection, could take days).

  I doubt that it is connected, but I also have license issues major since the move to the country and therefore duty cancel my subscription and re-subscribe with a new account (different username etc..).  Half the time the apps that I use (AE, first, Illustrator and Photoshop) will not open, responsible for account Adobe comes constantly, opening and closing. Normally signing off CC and removing the OPM.db file works, but not always.  Need me an average of 20 to 30 minutes to open any application Adobe, and sometimes they just do not open at all.

  I am incredibly frustrated to spend more time trying to AE to work I work in an AE - I don't want to not scream (Why oh why oh why adobe!) to you folk, but I feel like a fool to pay each month for software which opens at all, or that does not work when it does.  I should mention that on my iMac more recent (2015), with exactly the same applications and plugins (but who never had my old account on it) everything works pretty well as it should.

  Suggestions (apart from those you can find forums to research - I tried all MS) would be much appreciated!

  Updated - I think I've fixed it (either by the way it took me ages to find this post, because someone had moved without letting me know, I got so stuck in a loop of browser redirection, as Adobe had allowed me to change my username to that already in use.)  I'm not fan No. 1 Adobe this morning...).

  Three things I tried, one of the last 2 must have worked.

  1. I checked the host file, it was empty, but apparently rogue adobe references often cause this problem.

  2. I checked my installation in the creative menu cloud language - it was strangely grayed out, so I confirmed language than English, this could well have caused the problem that I've used French as the language of installation (I work in English, but teaching in French...).

  3. I think that this might have been what solved the problem - I renamed the folder SLCache (Support HD-Library-Application Adobe) in SLCache.old (effectively removing) then restarted the computer.

  Now the questions link license and dynamic seem to have disappeared, Dynamic Link is very slow, but it has always been.

• Newbie: Pre 10 Clips will not play not (preview) in the monitor

  I am, I suppose, a beginner, because I haven't used at all first since v.6 and don't know for the most part with iMovie, Win Movie Maker and Corel Video Pro.

  I use PrE10 on computer of Windows 7 with 3 GB RAM and three recently defragmented or formatting of drives with at least 200 GB of free space.

  I use clips in Organizer as MOV files, and settings of the project have been properly adjusted to Standard DV.  The clips will play fine in the Organizer.

  In the first instance, by clicking on the button Play don't 'play' not the clip does not work (rotating circle) and don't go back to the Pause button that can be clicked to go back (in other words, nothing seems to be frozen).

  Dobuble-click on the thumbnail of media will launch the preview window, room can be clicked, but nothing happens.

  I'm SURE I'm missing a step.  Can someone tell me what this can be?

  1st, what version of Quicktime you have installed?

  QuickTime errors http://forums.adobe.com/message/4545437

  QuickTime X does NOT work http://forums.adobe.com/thread/888722

  ExporterQuickTimeHost http://forums.adobe.com/thread/1109614

  2nd, read Bill Hunt on one type of file as WRAPPER http://forums.adobe.com/thread/440037

  What is a CODEC... a primer http://forums.adobe.com/thread/546811

  What CODEC is inside of this file? http://forums.Adobe.com/thread/440037

  .

  A report with the codec of your file details, use the programs below... a screen capture works well for people to SHOW what you do

  http://forums.Adobe.com/thread/592070?TSTART=30

  .

  For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/

• video clips will not load or play

  Video clips do not load or play

  Your list of details of the system that does not have the Shockwave Flash plugin is installed and activated.

  • Firefox/tools > Modules > Plugins

  You can find links to the latest version of Shockwave Flash player for Firefox on this page:

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

  You can check on the Page of Test Adobe Flash players that the Flash plugin works and what version you have.

  • http://www.Adobe.com/software/Flash/about/

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• bright room will not be rendered

  Yesterday, I was in the grid view. Looking through a smart folder of images without keywords and keywords SPRAYPAINTING-while in mode grid. All of a sudden, LR 5.7 began to LAG, and then he hung up.

  [Just before that, somehow a little menu appears which controlled the vignettes in the film strip and I chose big or maybe more...]

  So I thought that I close off LR and save things because sin LR 1.0, I have never seen this never happen.

  The backup hooked up to 80% for half an hour. When I started to LR - this catalogue has been CORRUPTED and could not be repaired... I can't find more when I finally saw, he did say * *.lrcat he had other numbers and other things in the name of the file...

  So my last return was until the 22nd so I lost the work since that time, but I have backups.

  OH, BUT NOW, the images will not appear. Files, folded, collections and all ethat was there before the 22nd appear as gray boxes...

  
  

  Just Adobe HELP and he said to post again here.

  
  

  < img >https://dl.dropboxusercontent.com/u/5501747/DEAD_LIGHTROOM.jpg< / img >
  

  preview files had become corrupted while the catalog... I've renamed the new preview files and created LR when it restarted...

  life is swell... rely on your self...!

• CS6 AE will not be rendered on my last bit of clips, error code 1610153464

  Hello

  My person finished VFX do some effects at home recently and did the effects in Adobe After Effects, not through dynamic binding. It is about 20 different clips and I made the first 16 one by one with no problem until I came up to #17. None of the effects are rendered out now and when I googled for solutions, I couldn't get a clear consensus on what to do. I am getting 2 different error messages:

  (1) the 1610153464, saying error: a file may be damaged when it shouldn't because I used the same clip in previous effects and things were very good.

  (2) once I click on this box, another comes up saying "error (4) framework for reading the 'directory of the file here' file (86: 2).

  I tried to do all the other stuff like clear my cache memory and deletion of space on my hard drive but nothing has worked. I work on a mac and can give you some technical information you need.

  Here are five possible:

  • Make sure CS6 is fully updated.  Updates solve many problems.
  • Tour of multiprocessing if you use it.  8 GB may seem like a lot of memory, but for EI?  Not really, and an occasional purge of RAM might help... is happening in the AE preferences.
  • Of course, you can use the Animation of QT codec, but there may be more more efficient codecs with greater depth of bit of color available, such as ProRes.  PNG of QT is good, too.  And while we're on the subject of QT, make sure you use QT7 and not QTX, which is a real dog.
  • Some video Copilot gives AE plugins should be... but it seems that you use only images.
  • Check out this external drive!  It is 80% full, it's full.  Do not try shoving more files on it.  And how the drive is connected?  It might be slow you down.

• Jam clip will not play my aac/m4a files.

  Hello
  I bought a Jam of SansaDisk Clip.
  It is a pure piece of kit, but it does not play aac/m4a files.
  Sansa will be able to fix this with a firmware update?

  These files play OK on my iPod Shuffle before he shuffled off the coast of this death spiral.
  It could be that the Jam Clip is simply too fussy about the types of aac/m4a files it can and can not play.
  I'll give an example of unread aac/m4a file if you need it.

  Hello
  There is a problem with the video Jam and m4a files created by FFmpeg (/ converter programs that use FFmpeg).

  FFmpeg people work on a patch (for the FFmpeg program, not for the Jam Clip).

  If people have m4a files that will play on their Jam Clip (because they might have been converted using FFmpeg) they can probably be fixed without convert them again.

  The process is known as "Re-multiplexing.
  It is a process without loss, the sound quality of the fixed files is just as good as the originals.

  I used this method here---> https://www.hydrogenaud.io/forums/index.php?showtopic=109931
  (#6 Post and Post #7)

  There are other ways to do the job.
  Google search for terms such as "mp4 muxer.

  

• Clip + will not be recoverable not reset or turn on.

  So I have a new renovated (from Newegg) 4 GB Sansa Clip +. I bought for my dad so he could listen to mp3s in the car, but today, he said that it does not turn.  He turned on and plugged into the USB car charger, after that, it no longer lights.  I tried to reset soft, pressing the power button for a few minutes.  Nothing.

  I also tried holding down the Center button while I Plug and it was acknowledged, but he said to ' format removable disk: F before use "or something like that.  I don't know what is happening.

  Can anyone help?

  Try pressing and now the Menu/Home button a fraction of a second after pressing the button of power as you normally would to activate it. This will sometimes wake him.

• Will not be rendered Quicktime mov H.264 encoder Media 2015

  I used to render a file .mov for Quicktime from EI and the Prime Minister with the H.264 codec. Quality is better than simply choose H.264 as making a quicktime was the way to go. I noticed that Adobe has taken this option and kept in the Media Encoder. I read the reviews and try to encode the Media Encoder, but it does not work. I even tried opening CS6 and rendering of their like I used to do. But it does not work as well. "Film compilation error. Unknown error.

  Question: Why won't this work? I need a Quicktime .mov with H.264 codec file!

  PC

  3DBoxx W8920

  64G RAM

  You want actually a mp4 file and not a Quicktime H.264 because Apple does not support h.264 to QuickTime more or ongoing development. QT h.264 is buggy and problematic and not recommended for anything. Using h.264 presets in the SOUL and make a mp4 will give you a file that will play on any device and has compression rate properties excellent vs data. H.264 QT has never been very good and is not currently recommended for anything.

• When I drop a second video clip with audio in a sequence, how is the 2nd clip will not display or launches its audio track?

  I hope someone can help me with this.  I've just updated to the new CC first pro and when I drag a clip that has audio it displays correctly only audio in the audio track, BUT... when I drag a clip (or even the exact same clip) in the sequence of the audio track is not displayed and cannot be heard or published.  Just to double check, I did a new project, tried to load these two clips in reverse order and it worked the same way.  Only the first loaded track will show that it is the audio track.  When I create a new sequence by using the menus at the top specifically to test this, none of the audio tracks are displayed when the drug on the time line.

  I also tried to load the video in the window source first before I drag it down. Sometimes the source plays audio, sometimes it does not. Anyway the audio still does not appear.

  

  I hope that there is just a shoddy setting, I've turned on.  I know how to do Prime Minister rip the audio output and is it she's own track after the fact, but the whole issue is speed and convenience, and I never had this problem in the old version.  Thanks much for any help.

  Check A1 left the lock.

• Clip will not play certain albums

  I scanned through many forums and not found an answer. I have a + 4 GB clip. I drag and drop albums from the Explorer into the clip. They were torn to WMA (WMA or WMA Pro VBR or Lossless), throughput of 128 Kbps. I use Windows 7.  They are not protected against copying. the usage rights are not protected. I've updated the firmware to the last, I reformatted the clip. Format USB is set to Auto Detect. I reloaded the music. Two examples of regina spektor - fairly recent albums. "Begin to Hope" plays, 'Far' does not work. The clip going on just across the tracks quickly in an endless loop.

  Audio books from audible all copy and play very well

  I don't know there is a simple explanation moderately - I can't find it. Can anyone help?

  neilmck wrote:

  I scanned through many forums and not found an answer. I have a + 4 GB clip. I drag and drop albums from the Explorer into the clip. They have been ripped to WMA (WMA or WMA Pro VBR or Lossless), throughput of 128 Kbps. I use Windows 7.  They are not protected against copying. the usage rights are not protected. I've updated the firmware to the last, I reformatted the clip. Format USB is set to Auto Detect. I reloaded the music. Two examples of regina spektor - fairly recent albums. "Begin to Hope" plays, 'Far' does not work. The clip going on just across the tracks quickly in an endless loop.

  Audio books from audible all copy and play very well

  I don't know there is a simple explanation moderately - I can't find it. Can anyone help?

  WMA Pro is not a supported format.