Install W7 clinging to the "Installer starts services.

Similar Questions

• I have windows xp after the installation of service pack 3 I can only start in safe mode

  I have windows XP after the installation of service pack 3 I can only start in safe mode?

  Hello

  ·         You get the error message?

  ·         What happens when you try to start in normal mode?

  Method 1

  Windows XP can in every start Safe Mode by default. Even if you select the option Start Windows normally, it always starts in Mode without failure. IOW, you can't get out of safe mode.

  This happens if the switch/SafeBoot is added to the Boot.ini file. / SafeBoot parameter forces a boot in safe mode by using the specified parameters. The available parameters are:

  (a) minimal (b) network (c) safeboot: minimal (alternateshell) For more information about the boot.ini switches, see visualization and correction of the settings of the boot on x 86 systems RESOLUTION (a) click Start, run and type MSCONFIG (b) click the Boot.ini tab (c) If you have a dual-boot system, select the entry that is appropriate under the [operating systems] (d) in section downstairs, Startup Options uncheck / hisFEBOOT (e) click OK (f) restart Windows The entry/SafeBoot are removed from the Boot.ini file.

  Method 2:

  If the above method is not the cause, it seems that Service Pack 3 is not installed correctly.

  Step 1: You try to run the system restore from safe mode that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Note: System requirements to install Windows XP SP3

  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have two error codes on Windows update Code: 80240016 & an internal error has occurred in Ox80010108 during the installation of Service pack 1.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Click here to show or hide detailed information

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 how to obtain the latest Windows Vista service pack

  968849 how to obtain the latest service pack for Windows Server 2008

  Solution 2: Run the system update readiness tool

  Click here to show or hide detailed information

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the How to download the system update readiness toolsection ".» If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  Collapse this includes this image

  .

  2. in the Search box, type System, and then click System in the programs list.

  Collapse this includes this image

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  Collapse this includes this image

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can click here to download the preparation tool system update from the following Microsoft Download Center Web site. The following files are available for download from the Microsoft Download Center:

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  Collapse this includes this image

  Download the update tool for Windows Vista x 64 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 x 64 (KB947821) package now.

  Collapse this includes this image

  Download the system update for the systems Itanium (KB947821) package.

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads

  For more information about the update of the system tool, click on the numbers below to view the articles in the Microsoft Knowledge Base:

  947821 description of the update for Windows Vista and Windows Server 2008 system preparation tool

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:

  a. right-click on the icon of the third-party program.

  b. click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.

  3. as soon as you close the antivirus or the antispyware software, try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.

  4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  If your problem is still not resolved, you can try the steps of troubleshooting on your own, or you can contact Microsoft technical support.

  Resolution 4: Uninstall security applications, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  A third-party security application (for example, an antivirus application, a firewall, or antispyware software) can still be causing the installation fails, even though you tried to disable the application. The Windows Vista SP1 installation requires several restarts of the computer, and the security application may be reload after the first reboot. Applications that provide registry repair features may also cause the installation to fail.

  You can uninstall your third-party security application before you install the service pack. However, you should do this only if you are positive that you can reinstall the application as soon as the service pack installation is complete. To reinstall the third-party security application, you'll need either the original installation media for the application, or you need the original download. You may also need a product key to reinstall the third-party security application.

  If you are sure that you can reinstall the third-party application, uninstall the application from the programs and features item in Control Panel. To do this, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, click Start

  Collapse this includes this image

  .

  3. in the find what box, type programs.

  4. click on programs and features.

  5. click on the name of the security program that you want to uninstall.

  6. click on Uninstall.

  7. After you have uninstalled the program, restart the computer.

  8. try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
  Note You have uninstalled your security software, and your computer is more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you do not surf the Web, use e-mail, or use instant messaging, up to what you have done to solve the problem, and you have reinstalled your security software.

  9. After completing the installation of Windows Vista SP1, reinstall the security program that you uninstalled in the previous steps.

  * All of these resolutions were conducted, but still having trouble running SP1 & SP2. It's a problem of installation and after the installation of Service packs 1 & 2 times. I have a SYSTEM of 32-bit operating systems. KB947821 analytical TOOL has also been installed!, by following the instructions in res 2. Security / Antivirus has also been disabled in accordance with the instructions of res 3 & 4. Service packs Download but will not work!

  Get help the community?

  Hello DavidCarmichael,

  Thank you for your message.  I see that you have already run the system update readiness tool.  Feel free to skip step 1, but follow-up on the rest of the below troubleshooting steps:

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the results of each utility.  We can't wait to hear back on your part.

  See you soon

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Reader of CD-ROM/DVD-Rom disappeared after the installation of Service Pack 2

  Why my CD-ROM/dvd-rom drive does not disappear after the installation of Service Pack 2 and how do I get it back? Because before I installed Service Pack 2 I had a problem of code 10 and tried deleting the thing fixing upperfilter, but that did not work, so is there anything else I can do. I have a HP Pavilion dv9000 and it is 3 years old.

  Thank you!

  Hello

  Check with HP, their drivers support and documentation online and ask in the HP Forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• tried to install creative cloud but the installation file does not work.

  tried to install creative cloud but the installation file does not work.

  the installation window is suddenly turned off.

  What can I do?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service pack of windows 7

  ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before

  Is not fully compatible with win7, some patches are available from ATI

  http://support.AMD.com/us/KbArticles/pages/CatalystAGPHotfix.aspx

• you just bought LR6 as I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  you just bought LR6 DVD that I tried to install Adobe says that the installation is not possible because I am running Vista, even if I run Win7 Home Premium on my computer. Any ideas how to solve this problem?

  Right click on the file Setup.exe and choose Properties option.

  Then click on the Compatibility tab.

  The value of the Windows 7 operating system and check.

  See the link below:

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• Toshiba satellite which is stuck in the installation of service Pack 1. I have service pack 2, can not fix with this cd, can I install service Pack 2 on it without loss of data or files?

  I have the laptop (Toshiba satellite) friend who's stuck in the installation of the service Pack 1.  I have service pack 2 and am wondering, since I can't fix with this cd, can I install service Pack 2 on it without loss of data or files?

  PC claims service pack1 cd with file asms

  When you use service pack 2 cd can not load product catalogues, it is fatal error, the Setup logs files should contain more information.

  Why not integrate Service Pack 2 and Service Pack 3 on her XP CD by following the instructions here (using another PC):

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/1443.aspx
  Copy all data on an external hard drive, do a clean install using the XP CD updated (preferably on the BIOs)
  Then, install the drivers from the system, then Microsoft Security Essentials, Windows 7 Firewall Control (XP free Version) and Malwarebytes' AntiMalware (free or Pro) or whatever you prefer security.
  Then copy the files over.
  This will probably lead to the best performance.

• Cannot install Lightroom 6, had a disc for Christmas and I can not install once the installation starts, it stops at 1-2%

  first he said I was on vista but I run windows 7 after fixing that via guides found on this forum, I went to install again and he just used to do it stops at 1-2% each time, ive tried to download the installer and don't use only not the disk, the same question. turned off the firewall and a load more things I found online that did not help. I am out of ideas now if you please any suggestions would be great.

  Did you try mentioned to make older programs in this version of Windows - Windows help?

• my computer guard reboot changes back several times after the installation of Service pack 2 on Vista.

  I tried to update my computer (Dell, Vista Home premium) with service pack 2 for Vista.
  But after completing the installation, there was an error when I tried to restart to complete update and work stoppage.
  So I restarted the computer and, instead of log on screen, the message [service pack was not installed recovery changes do not turn off your computer] appeared
  and then restart automatically.

  Now it's repeating this cycle for a day!... .the message - > restart-> message-> restart...
  What should I do? I can still start windows safe mode. (the same message...)
  I have lots of important files it contains so really want to reinstall Vista.
  Please help me...

  Hi arkitekromero,

  Given that repair options did not work for you.  I suggest you try the method below.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. Rename the Pending.xml file, and then change the registry notes read the following important notes before you use this troubleshooting method. Use this method to resolve the symptom of restart that is described in the "Symptoms" section, so that you can back up data before you reinstall Windows. You must use this method of troubleshooting only if you plan to back up data and reinstall Windows. Use this method only after trying other methods. Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer for instructions on how to continue. Use this method only if the computer has no restore points or if you cannot start your computer to a point where the system restore feature is available. After using this method, the following conditions may exist until reinstalling Windows: An update is being installed may not be installed correctly. Windows Update may not work correctly. If an update is installed, you may be unable to stop the installation process. You may be unable to enable and disable certain Windows functions in option. Certain optional Windows features may not work correctly. The computer may be in an unprotected state. To rename the Pending.xml file, and edit the registry, follow these steps. Start Windows Vista and go to system recovery options: Insert the Windows Vista installation disc in the disc drive, and then restart the computer. When you are prompted to restart from the disc, press any key. When you are prompted, configure the language to install, time and currency formatsand keyboard or input method options that you want, and then click Next. On the Install Windows page, click repair your computer. In the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next. Use the system recovery options to rename the Pending.xml file and modify the registry:

  1. In the System Recovery Options page, click command prompt.
  2. Type cd C:\windows\winsxs, and then press ENTER.
  3. Type ren pending.xml pending.old, and then press ENTER.
  4. Type regedit and press ENTER.
  5. Select HKEY_LOCAL_MACHINE.
  6. On the file menu, click load the hive.
  7. Look for the following folder:
     C:\windows\system32\config\components
  8. When you are prompted for a name, type Offline_Components.
  9. In the registry editor, find and delete the following registry subkey:
     HLKM\Offline Components\AdvancedInstallersNeedResolving
     HKLM\Offline Components\PendingXmlIdentifier

  Exit the registry editor:

  1. At the command prompt, type exit to quit the registry editor.
  2. Press ENTER.
  3. Click restart.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• Automatic updates has attempted to install KB963707 repeatedly, preventing the installation of SP1.

  Laptop with Vista Home Premium 32-bit tries to install KB963707 again and again and more, preventing the installation of SP1. Although SP1 is completely and correctly installed, it states that it has not installed and back.

  Have you tried disabling the automatic updates, and then install service packs?
  A practice that I had in XP when the reinstallation of the operating system was to disable the automatic updates, wait until I had installed all service packs, then turn it back on.

  To disable automatic updates
  GoTo Start-> Control Panel
  Click on "Classic view".
  Click on "windows update", which is usually towards the end
  Click on "change settings".

  under "major updates" choose one of the last two options. Is the "check for updates but let me choose whether to install" or "never check the updates. It does not matter because we will change things back that upgrading to SP2.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off

• Re-installing CS5.5 following the installation of Windows 8

  Hello

  There are messages Hauptstr received after the re installation of CS5.5 on my PC after installing windows 8:

  Exit code: 6

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 78 (s), 56 warning (s)

  WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}

  WARNING: DW066: OS requirements not met for {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6}

  WARNING: DW066: OS requirements not met for {43A1C48E-3E50-410e-951C-E17A66BBF824}

  WARNING: DW066: OS requirements not met for {8F366029-8F3C-4400-BB65-7BFD1A58F200}

  WARNING: DW066: OS requirements not met for {B55FDCCB-8A45-4943-8D90-585C3490A032}

  WARNING: DW066: OS requirements not met for {4603E0C5-6880-4A4F-BCF8-DF1F6AE0E317}

  WARNING: DW066: OS requirements not met for {EB186BF2-0A84-40A2-B794-0326D3DF9973}

  WARNING: DW066: OS requirements not met for {3450d4c5-a82b-4428-a512-842ee1555a14}

  WARNING: DW066: OS requirements not met for {0669F23C-1B69-41B4-A3ED-4F54A5986D66}

  WARNING: DW066: OS requirements not met for {C1302004-7A3C-467A-80AC-4D0C9F6982C1}

  WARNING: DW066: OS requirements not met for {7CAD45EF-24AD-4281-9236-7F8DDB0B9538}

  WARNING: DW066: OS requirements not met for {61D7BE95-B5C3-4257-A773-64596D72E848}

  WARNING: DW066: OS requirements not met for {C2F8BD34-1692-40F9-BA1B-1CFB2B5FED3A}

  WARNING: DW066: OS requirements not met for {F194231A-13B9-45B9-9699-1B9AC6500263}

  WARNING: DW066: OS requirements not met for {7745F18B-FD8A-4011-BE16-588900C503D0}

  WARNING: DW066: OS requirements not met for {7CF76BDA-73EA-4C46-A59D-FC3142D83E65}

  WARNING: DW066: OS requirements not met for {B0D32525-8AFA-43C4-B84D-AB2A844D5EAD}

  WARNING: DW066: OS requirements not met for {0A186736-9C62-48B2-B1DF-8A9C5CF7C997}

  WARNING: DW066: OS requirements not met for {CC35904A-0197-4F06-BD70-9CE3DB24DBFD}

  WARNING: DW066: OS requirements not met for {4B51E596-6BB0-4244-9AB9-344AD5FA6726}

  WARNING: DW066: OS requirements not met for {CCB778B5-25B8-4E57-9F20-72B11B443EF9}

  WARNING: DW066: OS requirements not met for {A92DAC1E-9F7C-46A3-BD06-8E629A5E1D07}

  WARNING: DW066: OS requirements not met for {01CABE2B-CE62-4924-8F8F-D9EF7491B23B}

  WARNING: DW066: OS requirements not met for {D0C50427-0E90-4821-91F3-D9476235901F}

  WARNING: DW066: OS requirements not met for {F3AEA2B8-DC79-470F-9D16-A4E9CF2F8810}

  WARNING: DW066: OS requirements not met for {277DDEAC-D86F-404B-BC5F-AC5B3E073671}

  WARNING: DW066: OS requirements not met for {C25C56B5-DF4B-4D25-B25F-9E7953648016}

  WARNING: DW066: OS requirements not met for {85A65551-7D55-4AB5-83EB-2B352A0DDD08}

  WARNING: DW066: OS requirements not met for {3A95850D-2A0E-48FC-95C0-3F27B95DA7EC}

  WARNING: DW066: OS requirements not met for {6BC81374-1E33-4495-93E2-DD2B10D358EE}

  WARNING: DW066: OS requirements not met for {606A0AC5-5F90-4379-81AE-11B44707E094}

  WARNING: DW066: OS requirements not met for {3EE734CB-F7AD-4691-9712-066E9FEC3E62}

  WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}

  WARNING: DW066: OS requirements not met for {33ACD529-5CB3-4602-A7DC-26F38E61F4E1}

  WARNING: DW066: OS requirements not met for {F3E41C2A-3A29-476D-9685-3F8055AF696A}

  WARNING: DW066: OS requirements not met for {5D2A85AB-7391-4EAC-AA61-D5D9C09E4F17}

  WARNING: DW066: OS requirements not met for {C7B84D34-0C2F-47F5-BEEB-53D49964350A}

  WARNING: DW066: OS requirements not met for {D8CCCF4C-C227-427C-B4BE-736657D2AB7E}

  WARNING: DW066: OS requirements not met for {273F6D81-E280-4B31-90E7-8B337DB641CF}

  WARNING: DW066: OS requirements not met for {808D880A-D2C6-484E-89C1-A7801F1AC978}

  WARNING: DW066: OS requirements not met for {23767F5D-A80C-4264-B8EA-ED4085FC332A}

  WARNING: DW066: OS requirements not met for {9DDECED7-FD3D-4FE1-9779-4DDC0F843936}

  WARNING: DW066: OS requirements not met for {C0329E33-DEB4-48D9-B7B6-19493A6F062E}

  WARNING: DW066: OS requirements not met for {52028359-B2A6-4DED-8683-0814A5D28F6A}

  WARNING: DW066: OS requirements not met for {08EF22BC-43B2-4B4E-BA12-52B18F418F38}

  WARNING: DW066: OS requirements not met for {53AE99B6-350B-4E3E-8D2A-AD11EA649A30}

  WARNING: DW066: OS requirements not met for {10355145-8A4C-47F3-994B-B9B81B4DABF5}

  WARNING: DW066: OS requirements not met for {1EF9FEC2-3EAD-4BC5-AF93-DAE033CACE94}

  WARNING: DW066: OS requirements not met for {D97AF04B-B70A-4862-BC25-31E6D9C4A529}

  WARNING: DW066: OS requirements not met for {403C7EA0-43DF-4754-82A4-94B1EBD9EFA4}

  WARNING: DW066: OS requirements not met for {E1B098A4-2FDA-4722-9E9B-CD28F535E9DE}

  WARNING: DW066: OS requirements not met for {E348E466-429A-4FB0-AFCF-8306C16BBFF1}

  WARNING: DW066: OS requirements not met for {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34}

  WARNING: DW066: OS requirements not met for {B7CD6FCB-0BCF-47C7-B770-D1E0772F4417}

  -Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} standard Adobe 2.0 2.0.0.0.

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current status: Exit Code 0: 0 Service specific exit Code: 0 (Seq 1)

  -Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -.

  WARNING: DF035: file CreateAlias:Icon does not exist in C:\Program Files (x 86) \Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.0E7880P-1016rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for 2.6.lnk C:\ProgramData\Microsoft\Windows\Start Start Production Premium CS5.5\Adobe Pixel Bender Toolkit icon with target C:\Program Files (x 86) \Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe (Seq 89)

  -Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0.

  ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action NewCustomAction1, location: C:\Users\MICHEL~1\AppData\Local\Temp\InstallAX.exe, command: - install activex - msi

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error: 1722.There error is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your provider to support personal or package. Action NewCustomAction1, location: C:\Users\MICHEL~1\AppData\Local\Temp\InstallAX.exe, command: - install activex - msi

  -Payload: {F194231A-13B9-45B9-9699-1B9AC6500263} Adobe Encore CS5.1 Library 5.1.0.0 -.

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2710)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2726)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2728)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2734)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2736)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2738)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2740)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2742)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2746)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2748)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2750)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2752)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2754)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2756)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2770)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2784)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2790)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2792)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2794)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2796)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2798)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2800)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2802)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2804)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2818)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2820)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2822)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2826)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2836)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2838)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2840)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2842)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2844)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2846)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2848)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2854)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2864)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2866)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2870)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2892)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2894)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2896)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2928)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2938)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2958)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2980)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 2998)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3018)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3020)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3022)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3024)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3026)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3028)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3066)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3072)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3074)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3084)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3094)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3118)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3156)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3158)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3160)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3162)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3164)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3166)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3168)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3172)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3174)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3176)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3186)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3196)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3198)

  ERROR: DS012: LocalizeFile: Localized string not found for locale ' en_US '(Seq 3214)

  -Payload: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} Adobe Flash CS5.5 11.5.0.0.

  ERROR: DR012: development of registry failed. Error 5 access denied. (154 Seq)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Flash Player ActiveX 10: installation failed

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium