Cliq 2.1 can only do a factory reset?

Similar Questions

• How can I do a factory reset on windows p7-1414PC 8.1

  A breakdown of current and the restoration resulted in a power supply damaged. Supplu has been replaced by a computer Tech.

  Computer turns on.  Receive the error code File\BCD message 0xe0000098, Boot Configeration data file

  no signs for an operating system.

  Do you have a system recovery procedure, the same error.

  How can I do a factory reset?

  Bought a CD of Windows 8.1 and windows reloaded 8.1 which fixed my problem.

  Thank you

  Big_Dave wrote:
  

  Hi herb,

  I am very surprised that computer technology has not corrected other problems since the it had replaced the power supply and should have the knowledge necessary to get you up and ongoing enforcement.

  Read this publication articlefor your PC on the conduct of HP recovery.

  If you do not have a set of external support of HP recovery, then you should consider ordering a set of HP as soon as POSSIBLE, you might have other issues that may require external support.

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• How can I do a factory reset on my HANNSPREE 7 windows

  factory reset, how can I do

  You see the frequently asked questions on the Hannspree web page (http://www.hannspree.eu/), send a note to their help desk or read the documentation that is installed on your PC.

• BlackBerry Smartphones how can I do a factory reset without going into the blackberry software?

  Hello

  My Blackberry Curve 8520 I just "App Error 523".

  Whether the bust means that I have to do a FACTORY RESET, but I was wondering how to do this without using the Blackberry Desktop software?

  I wonder if the blue keys inside Blackberry anything on this subject.

  What blue keys inside?

  You'll need a Windows PC. Period.

  (1) make sure that you have Blackberry Desktop Manager installed.
  http://NA.BlackBerry.com/eng/services/desktop/
  (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

  'c:\program files\common research in motion\apploader\loader.exe' /nojvm

  (3) the Application Loader Wizard will appear - click on "next".
  (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
  (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Congratulations! Just unplug and let the process finish completely.

  NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.

  BlackBerry Device Operating System downloads: http://www.blackberryforums.com/blackberry-device-specific/
  Simply select the model of the device in the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

  *****************
  IF the above does not work or help, you need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  Download JL_Cmder http://www.blackberryforums.com/rim-software/18789-jl_cmder.html
  or download BBSAK http://bbsak.org/download.php

  If JL_Cmder does not work, you can try this:
  KB10144, http://www.blackberry.com/btsc/KB10144
  and this: KB20371 http://www.blackberry.com/btsc/KB20371

  Additional information:
  http://www.BlackBerry.com/BTSC/KB24395 "Error 523", "App Error 523", or "JVM 523" is displayed on the BlackBerry smartphone

  Item number: http://www.blackberry.com/btsc/KB10144
  KB10144 how to force detect the BlackBerry smartphone using the Application Loader

• How can I do a factory reset my DMS 5.1

  Hi guys! :

  I have a 5.1 DMS for the demo and each time you change a demo do you different configurations for devices. It there a way to do a factory returned to DMM and video instead of the portal is to remind every change that you did? I really appreciate your help! Thank you!

  Karla,

  I'm sorry.  I talked place. VMware images must be used for

  internal use only.  Images VMware cannot be upgraded.  You must have

  the VMware install disks for each DMS version.

  So it looks like a new installation will be required whenever you want to do

  a demo for another client or simply remove what you have configured

  for prior client or set a demonstration model to use for all customers...

  If you need to get the iso image for 5.1 do fresh installs, please

  Contact your local sales team Cisco or an account representative.

  Thank you

  T.

• Can not do a factory reset of the preinstallation directory

  Hello

  I have a portable Satellite Pro L450D I bought there a little more than 12 months. It has an AMD Sempron processor - Windows 7 Home Edition - 32-bit of the system.
  My problem is the laptop computer has become so slow, it became impossible to use. I have Kaspersky Internet Security 2010 installed from when I bought last year (definitions up-to-date).
  I looked in the task under the tabe of Performance Manager and the CPU usage is always 100%, even when it is not used; No apps or progs running in the background, NOTHING!
  I decided to do a new reinstall from the pre-install directory that came with the laptop, but no matter how many times I stop and start upward and press F8 for advanced options, it gives everything except one that allows to select repair the system. It is simply not there at all to select. I have a picture of the screen to the BACK, but this forum seems to not allow the photos to be attached and uploaded.

  Also when it starts normally (by default) HDD CD player - opposing the speedy BACKS see the:
  Windows 7
  Windows 7

  The first option in Windows 7, when selected will bring me in Windows quite slowly. The second option, Windows 7 takes me for one start of another? Not sure what it is, but it reports an error saying the device is inaccessible and watch something '00000000c' error number?

  My question is how can I get the laptop to give me the 'Repair' option when I select F8 at startup for advance settings. I'm stuck. This happens even with the repair disk that I created in the trunk of the drive and bios of the DVD, locate the DVD drive first to initialize to the value top!

  Any help or assistance will be appreciated.

  PS: I also bought a Toshiba Satellite A660 64 bit Windows 7 Home Premium to i5 processor about 6 months ago and that works beautifully except recently the Toshiba "HDD/SSD Alert" warns my drive is about to fail. but that's a separate topic regarding send it to for replaciement in car under warranty - I already backed up all the files and images of laptops from booth.

  Kind regards
  SilverTosh

  Hey,.

  The exact HARD drive recovery procedure is described here:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  If you don t have the opportunity to find your laptop, you need to use the Toshiba recovery disc but I can't imagine you don t have that option on the recovery disk too

  If you start from the recovery disk what is exactly happening and what options get you? Normally, after having started from the recovery disk, you get a screen where you can select the recovery option and you must confirm that all will be removed to restore the out of the box settings.

  You see that?

• How can I perform a factory reset on the portable series Aspire V5 - 571P? I am running windows 8 pro.

  I thought it would be Alt + F10, which is what it is on series TravelMate laptops.

  Try the option refresh the posted here. http://Acer.custhelp.com/app/answers/detail/A_ID/29934/

• HP Pavilion dv4: can I factory reset with an external monitor attached to my laptop?

  I got a laptop HP Pavilion dv4 entertainment PC. It has a cracked screen and I use an external monitor attached. Can I do a factory reset with the attached external monitor? The monitor is an HP w1815 LCD, case ini that matters.

  Thanks for any help on this.

  I would like to add that I can see on both screens only on screen cracked that I can't see the bottom of it due to cracking. As recovery options are visible on the external display, it would be prudent to start the recovery process? I made a few choice, but I am now at the point choose to 'pull the trigger' and click next to start it or hit Cancel.

  Thank you.

  Hi @Auntboris,

  Welcome to the HP Forums!

  It's a great place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the HP Guide's Forums:

  Learn how to post and much more.

  I take that you acquired an HP Pavilion DV4 laptop and want to know if you can do a factory reset with an external monitor because of the cracked screen.

  Yes, you can always make a recovery.  Here is a link to HP Notebook PC - perform a recovery of the system (Windows Vista) HP

  Here is a link to HP laptops - how to restore backup files created during the backup procedure F11 to help restore your files if you selected this option.

  Please keep me updated.

  Good luck!

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the ""Thumbs Up Icon " below."

• pavilion17-p001na: lost factory reset

  I received an email that I thought me Microsoft I opened it and it asked me to connect

  my account of microsoft access to the new free offers. I did and restarted the laptop.

  When she came back just froze I put the recovery discs, I had and a message has arrived

  saying the disc were unreadable. My son is a software engineer, I asked himabout it. He told me

  I have avirus ahd of the e-mail, he told me the formatting of the hard drive necessary to remove it.

  I do not have windows 8.1 pro so he changed the boot legacy and loaded with win 7 and the Crimson amd

  to make this work Microsoft I would like to make an authentic version on USB. I have not yet loaded win pro 8.1 still

  because I need the factory reset. This is the story. What I need help from you guys, it's how can I get this factory reset

  with all the software, I had originally. I know I could buy a drive at HP, at a high price. I paid a high price for the laptop

  which is not another six months hold. I think that hp are just trying to make soft money for the disc

  Thank you

  Peter

  dronie

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the need to do a factory reset and wanted to help.

  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  When you talk about customer support, tell them that your PC is only a few months and they may be willing to send you the recovery media for shipping only.
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• How to do factory reset of Marshmallow manual

  Hi, I lost half the functionality of my phone g2 bike during the upgrade of the marshmallow crossed.

  * cannot receive calls

  * can't slide down the menu from the top of the screen

  * No message notification, just sound

  * Unable to connect to the PC

  * frequent crashing apps

  In any case, after reading some discussions online, I want to do a factory of the phone reset to see if that eliminates the problems.

  Guess what?

  * I can't do a factory reset! Go into settings and reset, factory reset is not an option enabled.

  OK sorry, just need to all out. The question...

  How to do a factory reset of Marshmallow forced when the phone is off? I can't find the instructions online and the lollipop ones take me only insofar as the menu.

  Hope you can help, thanks.

  Follow the Instructions carefully.

  Back up all your data before you perform the reset.

  1. turn off your phone.

  2 press and hold the Volume down and the Power button for sometimes and release both buttons together.

  3. press the Volume button when you find the recovery highlighted, press Volume up key.

  4. the phone will reboot and you will get an Android Logo with! Select this option. Now press on and press and hold the power key and press the Volume Up key.

  5. now it will show the Recovery menu, in the choose Wipe Data and select Yes and wait until resetting the phone.

• 55XD8505 it recharges continuously--cannot reach the factory reset

  Hello

  My 55XD8505 2016 is having issues. When you enter the home menu is extremely slow and leave then it is only a matter of minutes before the device reboots. If I just start the TV and stay away from the home menu, I can watch TV.

  Now, my intention is to restore the factory settings to try to get the system going again. Normally a reset of the Android system can be done either

  (1) via the settings menu

  or

  (2) by switch on the unit with the volume on/off button + start button / stop key and use recovery menu.

  I can't do 1) since any speed, I navigate the menu of settings, the TV restarts before I can fill a selection of factory settings.

  I can't do 2) either - at least all the possible combinations of Sony, I found does not apply for my TV

  I'm all of ideas - is it possible to factory reset via the USB port (perhaps using ADB)?

  A nailed!

  I discovered that you can use 'top' under adb shell. I did the following:

  (1) connect adb

  (2) adb shell

  (3) top m 5 (this lists the first 5 cpu by using the applications)

  After running high and enter the main menu, I saw the CPU use climbing, and the app in the foreground was always/system/bin/mtkbt, which I figured well be related to Bluetooth. So, after a few attempts of menu navigation speed, I managed to enter the bluetooth menu and disable bluetooth before it restarts.

  Success! Now I can navigate the menu of home once again, I have the tried clear the data cache / anything related to bluetooth from the menu applications and then reactivate bluetooth, but alas the problem returns. So now I'm running the TV without bluetooth. I could try to factory reset the TV tomorrow to see if it helps - at least now I can actually reach the factory reset menu.

  UPDATE:

  Now after you turn off the bluetooth, I could navigate the menu to factory reset. After doing a reset complete, it seems that everything is back to normal - even with bluetooth enabled. Problem solved... Thanks adb.

• Factory reset does not work

  I have a Nighthawk X 8 I bought two months ago. Up to today (March 7), it worked fine. Today I came home and found it did not work. I tried to access it via routerlogin.net, nothing worked. I tried factory reset using a toothpick about 5 times now, but it doesn't seem to matter. my computer (connected via ethernet) does not allow me to set it up, and I'm not wireless. The power button remains mostly orange, but it seems resets automatically once in a while.

  I tried to call customer service, but they hung up on me while starting to record my router midsentence. I'm afraid I'll need a RMA number, unless someone can tell me why reset does not work. I tried to do it for 8 seconds (directions say that), longer, several times, while it was turned on, turned off, both, etc. None of this helps.

  If I can't get the factory reset to work, is there a way to set up an RMA number without appeal? After the initial CS hangup, I was told that I would be on the phone for an hour, waiting for relief.

  I ended up doing an RMA number. Got my new unit and it is working fine now. If all goes well, he will not leave in like the last 2 months...

• HP Pavilion dv7t-4100: Factory reset when Win7 was removed from the main partition

  I'm preparing this old laptop for sale. I started on a USB key and erased the C: partition where Windows 7 was installed. I then he reformatted to NTFS and set it as the partition active.

  When I rebooted and you press F11 to get to the system recovery, I get a message, there is no operating system on drive C.

  How can I do a factory reset at this point? The recovery partition is still there, I checked, so it's good. I have the ISOs for CD recovery, but I need to burn to disc to use. Is there a way to perform a factory reset of the recovery partition, without going through the hassle of doing this? I heard that there could be an option to boot from a USB?

  Thanks in advance

  Did not work. I guess I need to go buy the CD :/

• Factory reset after the removal of the system recovery partition

  Hey I had deleted my recovery partition because windows limit 4 partitions and I used all the others... I can still do a factory reset now if something is wrong? Or can I create a disk recovery or something?

  Just use Windows recovery integrated to do the backup, it is free and works well. The backup is a full system image & recover as mobile in the exact configuration is in at the time of the creation.

  A clone of left player would do the same thing & tends to be much more relible HP recovery & free.