Clock freezes in the docking station

Similar Questions

• Satellite click Pro P30W-2B - the docking station battery not charging

  Hello

  I have a Satellite click 2 Pro 30WB; at first, I didn't have any problem with this product, but a few months does not charge the battery of the docking station. I am able to load only the Tablet battery.

  Can someone help me?

  Thank you

  Hmm... If this problem has appeared since the first day of the purchase, the home question battery might be related to battery failure.
  In this case, you will need to contact the service to fix.

  But just one question: it's your BIOS up-to-date?
  Check the update in the station of service and if available new version of BIOS; try to update the BIOS to the latest status.

• Tecra M11 - 17V - identify the serial port on the docking station

  I have a laptop Toshiba Tecra M11 - 17V, which I often use with the docking station that accompanies it.
  There is a DB9 serial port at the back of the docking station, but I don't know what COM Port.

  I use Windows 7.

  In the device, COM9 Manager - COM22 are identified as Port BT (bluetooth). Com7 - COM8 are RIM Virtual Serial Port v2, COM17 is Prolific USB-to-Serial Comm Port and COM18 is USB-Serial CH340.

  I thought that COM17 or COM18 were the most likely candidates, but have not been able to get to answer using one of them.

  I connect a Psion 5 (Comms app) to him and have developed ports and the Psion 8bits, 19200 baud, no parity, 1 stop bit.

  Hello

  > There is a serial port DB9 on the back of the docking station, but I don't know what COM Port, it is

  I think you have misunderstood something wrong
  COM ports in Device Manager are virtual com ports
  There is no link between a serial port and a virtual com port.

  I have a question: what docking station you have exactly?

  I had an express port replicator and this device required an additional serial port driver installation.

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• Two external monitors can be connected to the docking station?

  Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

  Yes, you got that right.

  He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• T410 does not connect to the docking station

  I have a Lenovo T410 and a docking station 4338. When I tried to join the computer to the docking station last night, he would not go. I don't see any obstruction or something wrong with the plug on each unit; the computer can't accumulate up as before.

  I have another station host I can try, which should help to determine which device is the problem, but I won't have access to him until next week.

  Have someone has encountered a problem like this? Any suggestions to correct?

  I compared the two docking stations and identified the problem. There are two plastic hooks built into the base, one to the right of the connector, one left and below. In a station works correctly these hooks are discarded because the computer is inserted, then spring back, now in place.

  On my post of malfunction the hooks were stuck, prevent the computer from insertion.

  I was able to fix the problem by pushing hooks with my finger, which take them off. If they stick once again I can try a Lube graphite.

• The docking station is friendly with battery

  Hello!

  First post here, not the user lenovo at the moment but I'll receive a lenovo R61 with mini dock station.

  My question its more general. I heard a lot of time to removed the battery from my laptop when I work in the sector do not overheat and kill the battery life.

  To the docking station, stop charging the battery when it is full.

  Thank you.

  Tom

  Tom, welcome to the forum,

  The battery stops when it is full, whether it's in a cradle or attached to a power adapter.

  Alternatively, you can change the thresholds of charge based on your usage using the software of energy Manager tool that is included.

  Enjoy your new ThinkPad when it arrives.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Ports of billing to the USE of the docking station does not

  I have a tablet of w700 acer iconia, the usb port on works actually compressed, but the usb three extra ports on the docking station do not work. How can I solve this problem?

  You have the power connected to the dock?  The USB ports on the dock will only work if the power is connected.  (If this isn't the problem, you can have a defective dock).

• Question on the docking station and external monitor support

  Hello

  Can you please let me know of the docking station (name, model number, etc.) I need to connect to two external monitors to my hp laptop 8560w (not the laptop screen).

  Thanks in advance

  rogers7942

  This allows 2 additional monitors in addition to the laptop screen:

  http://h30094.www3.HP.com/product/SKU/10432932

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Elitebook 6930p Wireless does not work then in the docking station

  Elitebook 6930p Wireless does not work then in the docking station, no idea how to fix this? It worked, then I got a soft image, not its broken.

  Visit this link

  WINDOWS XP - network connection turn off/on docking station

• T500 loses screen when ejected from the docking station

  At my office, I use a docking station with external monitor (DVI join). If I ejected from the docking station, my laptop screen darkens. The only way I can do it works to turn it off, eject and restart. It works fine then.

  I have the ATI graphics card, and I don't think that the switchable graphics works. Is it possible to use the integrated graphics card Intel when the battery power? This seems to be ideal.

  Any advice will be appreciated.

  Unfortunately windows don't remember installing icons when you switch your resolution. When you change the resolution would pass and spoil your icon arrangement.

• X 220 does not sleep well in the docking station

  Hello!

  When my X 220 are in the docking station (3 ban) and mode 'sleep' it often just turns on again. I tried unplugging all devices (mouse, ext.keyboard, etc.) the station host, but with the same result. All the drivers and so on are updated.

  Anyone have the same problem and/or for any solution?

  Hey ThinkVegard,

  I would double check your Power Manager setting and make sure they are properly defined and are not wake your computer the. There are a few settings in the BIOS that can do the same thing and suggest you checking these too just before we have to start looking elsewhere.

  Best regards

  Hiro