Clock stays together!

Similar Questions

• Why won't my task bar clock stay together?

  Why want my windows clock stay bar set task? I put and synchronize to the net 2-3 times a day. It drives me nuts cause all my emails messages, text and the cat have always the wrong time so Im never sure of when I got the msg of stamps. Please tell me how to fix it please!

  Maybe the computer CMOS battery took a dump and must be replaced. I would get a flat screwdriver (assuming that it is a desktop computer) pop-out the motherboard and then I look at the serial number on the battery and then buy the same exact battery and then maybe your problem will be solved.

• Why can't my system clock stay together?

  I put the date every time I start the laptop, and then when I turn the top of the turn off to stop the clock and date and time. I tried to synchronize with a time server but said error did not, give an error code. Automatic updates is set but does not work properly and anti-virus and malware warned me that my inaccurate clock, sort of maybe out of date virus database. Ive been told to go into the cmos and reset the cmos clock early towards the top but no info lit screen on which F button press to enter in the cmos. My lap top is Aspire 6920 G.

  It maybe F1/F2 or delete to enter BIOS. Maybe flat CMOS battery, and needs to be replaced

• CGI. AUTH_USER do not stay together

  I got CF8 running on iis7 and it used to work properly.  When a user logged on IIS7 with windows authentication, the variable cgi.auth_user want to stay together while they were in the particular folder that requires authentication.

  I just upgraded to CF10 and iis7.5, and now, when a user connects to a folder that requires authentication windows, the cgi.auth_user variable is set to just the page that requires authentication, when they go to the next page (s) through links, the variable cgi.auth_user is changed to null.

  The entire folder is configured to require windows authentication, but no cgi.auth_user value is...

  Can anyone help?

  It only took a few hours... but finally I found this is an IIS issue.  If Windows authentication is set to the folder level... it MUST be enabled at the server before it will fill the CGI variables throughout the application (instead of just the home page).  So the server level has two anonymous and windows authentication is enabled and the file which is limited anonymous disabled and enabled windows authentication.

• General no options not stay together

  I tried to change these settings to solve another problem which is that FF 11.0 now updates every time open FF. She goes through the verification of the add-on, then displays the same tab "Welcome to FF" whenever I have start FF.

  So, to try to solve this problem, I changed the settings General to 'see the homepage' and clicked on OK, quit and restarted FF only to present with exactly the same problem. General audit options revealed that it is changed to 'display the tabs from last time '.

  So, I have two problems. The ceaseless updating and display of the tab home already happened, with other versions.

  OK, here's what worked for me:

  I deleted my recent history under Options > privacy.
  Went to Firefox > help > troubleshooting Info > open with the record.

    I renamed the User.JS file.
  

  The constant update and display the page Welcome to FF ceased. Just to check my landline, I renamed the user > JS file back and the problem reappeared.

• Remove the banner of Conversation Windows "stay together".

  Good then Skype added this thing of banner advertisement (see screenshot) to the conversation window and it drives me crazy. It is not the ad itself, but the fact that it "seems" every time I restore a conversation window that has been reduced to a minimum. This causes everything inside the window to move down to greet him, and it's REALLY distracting and annoying. I looked through all the options and I have just as much as notifications and such died. Can someone tell me please how to remove it? Thank you.

  EDIT: Reuploded screenshot with blocked names.

  

  What you see are the new ads in the window of cat, tested today in selected countries and only for users with versions of Skype 6.10/6.11.

  http://community.Skype.com/T5/Windows-desktop-client/blank-tab-above-the-nickname-of-the-chatwindow/...

  You won't see these ads if you return to the previous 6.9.0.106 version.

  http://download.Skype.com/MSI/SkypeSetup_6.9.0.106.msi

  http://community.Skype.com/T5/Windows-desktop-client/blank-white-field-above-the-contact-details/m-p...

• The sound on my PC keep resetting to max - stay together

  I just bought a new laptop with the new Windows 7, and whenever I try to adjust my volume in the Middle, it resets to max! I've tired to jump out of my skin, whenever I turn on my computer, or use the sound thinking he is turned down and breath at home!

  No matter how many times I put it in the Middle, the computer it gives to its max! This is an example of the generic wonders of Windows 7, or is it something else?
  There must be something I can do? I should be able to decide how much I want the sound on my computer! I am so angry, that I am ready to resume these Toshiba computer trash and throw it on the man who sold it to me!

  Can you please tell us which model of laptop you have exactly?
  Is this the same problem when you change the sound level using Windows sound level control?

• 17 - g015dx: properties do not stay together after restarting the mouse

  Opening the control panel mouse properties I check the box to "Disable when internal and external pointing device USB pointing device is attached."  and click 'apply '.   I never use the Synaptics Touchpad and always use my USB wireless mouse.  After a reboot, the check box is disabled and the touchpad is enabled.  This is very uncomfortable with the touch pad and mouse works at the same time.

  How can I make Windows 10 remember the setting "Disable internal pointing device when external USB pointing device is attached;"?

  Thank you.

  Russ

  Hi Russ,

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Open the Synaptics Control Panel and enter a checkmark "Disable pointing device when internal and external USB pointing device is attached" and apply the change.

  Check if the parameter is now kept after a reboot.

  Kind regards

  DP - K

• Slider in windows bars will not stay together but immediately slide upward.

  I can't get the scroll bar on exploring or for the volume to hold.  He slides up, so I can't see and select files.  Moves the selection bar (to select a file), but I can't view the file is on, if the file does not fit in the current window.  Volume maximum rest and if I try to down it slips immediately up.  I tried to change the volume in Control Panel and on the windows taskbar.  This problem seems widespread on all windows.

  Hi James,

  Thanks for the reply, but I found that it is my wireless mouse.  It turns out that the roller on the tope of the mouse has been stuck/pushed down and caused this to happen.  My battery kept running out pretty quickly and the issue of the slider bar has been extremely boring.  I don't know if I should buy any type of 'special' battery as it may be related to the power of the mouse.  However, for the moment, everything's fine!   Moreover, I had already done all kinds of tests and cleanups.  I hope that this has improved the total functioning of the laptop.

  Thanks again!

  -Joanne

• How to separate Firefox opening page of the opening page of Bing as they appear glued together. If I delete or delete them, they stay together.

  I can't separate Mozilla Firefox from bing at the top of my opening page. Them is only about a quarter of an inch of firefox display. The portion of Bing is covering a section which offers the file, editing, display, tools and Help.I have tried everything I know, but without success. I had to many pages open at the same time opening. Because I have no access to the Tools section, I couldn't remove the additional pages. I was able to erase an add at a time but not the entire page. I can't take them off no matter what I try in the Tools section. I hope I have given you enough information to help.

  Thank you

  Try FireFox forums. You could get a resolution on their part.

  Support Firefox, Mozilla Forums:
  http://forums.mozillazine.org/viewforum.php?f=38

  Mozilla Firefox Forum
  http://www.firefoxforum.com/

  Firefox Support Forum
  http://support.Mozilla.com/en-us/questions For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 7 computer to dial the connection problem with baud rate setting do not stay together

  I've set the com port [converter usb to serial com cable 5] setting baud rate to 115200

  I set up the adjustment [communication between 2 computers cable] modem baud to 115200

  In the center of network share, I create a new network connection [set up a dial-up connection]

  When I check the properties of the dial-up Modem connection set to 19200

  I can't change to 115200 - but the connection is attempted to 19200, so it fails

  All solutions?

  Hello Stephen,

  Thank you for visiting the Microsoft Community Forum.

  According to the description, I understand you are trying to reset the baud rate for your dial-up connection. You tried to change the BAUD rate in your login from 19200 to 115200, but the connection attempt is made at 19200 and if it fails every time.

  I suggest you to check with your ISP (Internet Service Provider), if they have their own custom settings saved using an application that controls the baud rate.

  You can also view the following Microsoft help articles.

  SerialPort.baudrate, property

  http://msdn.Microsoft.com/en-us/library/cc561279.aspx

  SerialPort.BaudRate enumeration.

  http://msdn.Microsoft.com/en-us/library/cc561279.aspx

  Hope this information is useful. Please write us back for any further assistance.

• 2011 x setting of the sharpness of monitor refuses to stay together

  I recently got this monitor used to a member of the family because she bought a new computer. I set up the monitor, changed all my settings and grabbed lunch. Once I am back on my machine and turned on, I noticed that my sharpness setting was four instead of the two that I put it. So I reset, checked a blog on design references, played a game on Steam, ODDS and ends, then went to grab dinner, leaving my computer on. I'm home, puree the space bar as I normally do to wake my computer and noticed that my sharpness is set to four instead of two. Days to attempt to resolve this problem, asking friends and using ask.com to try to get an answer, I'm here now. Any help would be appreciated.

  Hello acw215079,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that the monitor you have received from a member of the family keeps returning to a different level of sharpness than what you set for. There are only so many things you can do with a monitor, and here they are.

  Start by unplugging the power cord from the screen and the wall. Press and hold the power button for 1 minute. Plug the power cord into the monitor, and then directly into the wall (not a powerbar protector or a lightning arrester)

  Then, press the Menu button on the front of the monitor. Navigate the menu to Factory Reset and select it.

  If the steps above do not work so I suspect it is the monitor, and the only thing I can think is you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• Windows Time __VISTA & Date remain TOGETHER?

  Windows Vista - usually stay together, I change at the right time and he won't run right and be same time that when I turned off the last time - no recent male spy or virus to my knowledge problems, same restoration is a not correct this?

  Hello

  How to fix synchronization of time Internet - add your own time server
  http://www.edbott.com/weblog/?p=1779

  Dealing with Windows Vista time sync problems
  http://www.howtogeek.com/HOWTO/Windows-Vista/dealing-with-Windows-Vista-time-sync-problems/

  Synchronize your clock with time servers Internet from the Vista command prompt
  http://www.howtogeek.com/HOWTO/Windows-Vista/sync-your-clock-with-Internet-time-servers-from-the-Vista-command-prompt/

  Time synchronization on Windows XP and Vista with Internet
  http://www.techexams.NET/blogs/jdmurray/synchronizing-the-time-on-Windows-XP-and-Vista-with-the-Internet/

  ==========================================

  If necessary to replace the CMOS battery on a laptop you probably need a real computer store
  (no leeks and glances at a BestBuy or BigBox stores) or the manufacturer of your system support.

  Battery CMOS is also known as RTC battery
  http://www.laptopparts101.com/CMOS-RTC-battery/

  How to replace the CMOS battery
  http://www.computerhope.com/issues/ch000239.htm

  CMOS BATTERY
  http://murfsgarage.cybertechhelp.com/CMOS.htm

  CMOS Batteries for many brands of laptop.
  http://www.Microbattery.com/laptop-notebook-CMOS-batteries.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Using Sections to tie together the two rows

  I use the ability of the section to bring together two rows.  I have a button that will duplicate the section.  On the screen shows perfectly.  However, when you save the file, open it back up it does not keep these articles.  It groups them into one.  Look at this example:

  TABLE 1

  RANK 1: Item1, item2 - line 1 & 2 are the group as section

  2nd ROW: Item1, item2

  User, press the Add button:

  Table 1

  1st ROW: Item1, item2 - so when the user presses the Add button it duplicates the section to add more than two lines in order

  Row2: item 1, item2

  ROW3: 1 item, item2

  ROW4: item 1, item2

  The moment user saves the form and exit...

  The user lanuches drive and opens the form. they see the result to follow...

  ROW1: Item1, item2

  ROW3: Item1, item2

  Row2: Item1, item2

  ROW4: Item1, item2

  I need the section to stay together...  Any suggestions of what can be done?

  Concerning

  Uncheck the box for "repeat row for each data item" tab Bidning Row2, and Row3 inside the Section.

  You actually create a new instance of the section (including Row2, and Row3). If this check box must be checked in the Section levl not at the level of the line. You have already checked the property Section so remove from the ranks 2 and Row3.

  Thank you

  Srini

• Prevent some spaces being justified

  Hi, I do not know if I ask something very stupid that everyone knows, or something it is not yet possible, but let's try it!

  So, justify a text means that the spaces between the words is stretched or compressed to align the text with the gutters.

  Let's say that I have justified a paragraph but inside this paragraph, I have spaces I want to be changed. (e.g. for Visual reasons)

  Y at - it a way for these space in order to prevent them from "lock" being stretched or compressed?

  TX

  Pages 5.6.2 on MacBook Pro with OS X El Capitan 10.11.5

  Hi Ranmaboy,

  I'm not sure what you're trying to do, but a non-breaking space would work for you? (Hold down the option key and type a space where you want two words to stay together).

  Example:

  

  Non-breaking space between 'fight' and 'them '.

  Kind regards

  Ian.