Problemas al convert Máquina con fisica RHEL5 a virtual ESXi 3.5 en con vCenter Converter Standalone 4.0

Similar Questions

• Converter standalone problem with Acronis True Image Home 2013

  I installed vmware vcenter converter standalone client/server Version 5.1.0 build-1087880 on my pc which has also installed VMware player.  I have true image home installed 2013 as well and have a file tib I want to use it as a virtual image.  I select local computer on the converter, select the source type 'Backup image or third-party virtual machine' and Virtual Machine file: and navigate to the local file that is a .tib.  If I then select "view source...". "it gives me the error"the source settings are incorrect. »

  
  I noticed that the documentation says that the converter works with acronis true image 10 and 11.  Is this the reason why I get the error message or is this error caused by something else?

  
  Thanks in advance for your help.

  Cameron

  Yes, unfortunately VMware Converter does not support the current versions of Acronis image.

  André

• VMWare converter standalone fails at 1%.

  Hello

  I have a problem of conversion of some machines on the subnet to another. Since then, I work at the University, here are fairly complex network infrastructure. Whenever I need an open port, I have to record a call and to wait a few days so that it can be resolved.

  I have:

  5.1 ESXi on the subnet has

  PC which is on the subnet and is able to connect to the subnet B via port 80, 445, 9089.

  Some servers that will be migrated at the subnet B.

  Now when I try to set a task with VMware converter standalone installed on PC to clone a physical host (win 2 k 3) on subnet B, I get status failed with the error message: an error occurred during conversion: 'unknown exception '.

  I found on this forum similar problem (P2V conversion fails at 1%, 'an error occurred when converting' unknown exception' ') and double-checked my logs.

  2013-08 - 01 T 11: 11:06.719 + 02:00 [warning 02020 'Default'] [, 0] NfcNewAuthdConnectionEx [NFC ERROR]: unable to connect to peer. Error: Unable to connect to server 1.2.3.4:902 (this is the IP of ESXi server)

  2013-08 - 01 T 11: 11:06.719 + 02:00 [02020 info 'Default'] [, 0] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'NBD_ERR_NETWORK_CONNECT' (error code: 2338)

  2013-08 - 01 T 11: 11:06.719 + 02:00 [02020 info 'Default'] [, 0] error 2338 opening disk ha-nfcssl: / / [ESXi_storage] servername/servername.vmdk @1.2.3.4:902! 52 14 82 92 62 db ec - a3 c4 4 a 72 fd f1 da b5 ac.

  the problem is unclear to me. Source machine tries to connect directly to ESXi server and storage. But for me to record a call "opening port" for each server that I want to convert is a little awkward to say and I was wondering is - it possible somehow to migration through PC in a subnet that has access to powered on the source machine and the ESXi server. And these machines would not need to directly contact the ESXi Server?

  Thanks for your replies.

  S.

  Hello

  You can convert to the format of the workstation and then convert the resulting ESX VM again. If you have a machine with enough storage in the subnet B, convert, and then physically move the machine or the storage of subnet A and convert again. So, you can bypass the firewall completely.

  HTH

  Plamen

• VMware Converter Standalone 5.0 U1 - cannot convert W2k3

  Hello

  I tried convert my physical server Windows 2003 R2 (with Service Pack 2) in VMware (to ESXi host) environment, but 98% is DOWN.

  VMware Converter Standalone version is: 5.0 U1

  The version of VMware ESXi Hypervior is: 5.0 U1.

  VMware Converter Standalone U1 5.0 is installed on this server (that I want to convert).

  I have attached one connects VMware Converter Standalone, a screen displaying the boot.ini file and the error.

  Could someone help me with this problem?

  Greetings,

  Damiano

  Observer the worker saves any error "could not find". I looked through you and found this:

  2012 12-21 T 13: 33:17.620 + 01:00 [02980 error "task-5'"] did not symmpi.sys in \\.\vstor2-mntapi10-shared-EC48ED48000010000000000016000000\WINDOWS\Driver Cache\i386\driver.cab
  2012 12-21 T 13: 33:17.635 + 01:00 [02980 error "task-5'"] could not find symmpi.sys in the specified CAB files
  2012 12-21 T 13: 33:17.635 + 01:00 [02980 error "task-5' '] Reconfiguration failed with: converter.fault.FileNotFound
  2012 12-21 T 13: 33:17.635 + 01:00 [02980 info "task-5' '] restoration of the transaction of reconfiguration...

  Go to System32\Drivers on the source server and determine whether symmpi.sys is in this folder. Otherwise, copy from a known working 2003 VM and copy also in drivers.cab in Windows\Driver Cache\i386\driver.cab

  Run the conversion again and choose the no power over the new VM and not turn off the source, in this way, you can check if the process is running. If so, great! If this isn't the case, observe the worker logs yet, find "could not find" or "reconfiguration failed with" to determine the cause of the failure.

  I have a lot of experience with this exact problem and it is almost always something to do with symmpi.sys

• y at - it an easy way to convert w7 64-bit with VMware vCenter Converter Standalone

  Hallo

  I am struggling with the VMware vCenter Converter Standalone with windows XP everthing works well...

  I would like to convert a 64-bit Windows 7 computer and run it on a windows 7 64 bit with vmware player > 4

  I get a blue screen and message windows cannot be bootet normally...

  Thanks for any help

  was soon rene

  Welcome to the community,

  It is most likely a problem with the virtual drive created for the converted virtual machine controller. Unless you specify the correct controller ("LSI Logic SAS' for Windows 7) type in the Converter Wizard, you can end up with an IDE controller.

  André

• Poor transfer rate using Converter standalone 5.0 compared to the 4.3

  I recently started using the Converter new version 5.0.0.  I did successfully more than 30 years of P2V Windows 2003 systems using version 4.3.  Immediately, I noticed two problems:

  (1) the average transfer rate went from about 100 MB/s to between 0.8 and 2 MB/s.

  (2) the process has systematically failed after completion of the c: cloning and start on the D: drive.

  I tried this on 5 different physical servers, ranging from 5 different servers host VMware ESXi 4.1 and the result was always the same.  I assumed it was a network problem or firewall and sent on a 'wild goose chase' network team for 2 days.  After that they were convinced that the physical machine being P2V was simply not sent sufficient packages, I went back and re-installed version 4.3 and restarted the P2V transfer.  This time, I received a transfer rate average of 100 Mbps (50 x faster) and the whole process completed successfully.

  Has anyone else seen a similar problem?  No possible explanation?

  The file you have to change is converter - Worker.Xml. It should be located under folder "%ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone". You should find the useSsl under the nfc subkey value in Config key. If not present, you can add this value as follows:

  ...

  fake

  ...

  ...

  Save the configuration file and restart the worker VMware vCenter Converter Standalone service.

• Converter Standalone Admin$ error

  I'm under VMware vCenter Converter Standalone (Version 4.3.0 build-292238) to my desktop (Windows 7 Home Premium 64-bit).

  I am trying to convert my laptop (XP Home SP 3) to a virtual machine.

  When I start the wizard to convert, it asks me the IP of the machine and the use/pass.  As soon as I did this, it opens a dialog box alert me that software must be installed on the remote computer and asking me how I want to deal with uninstalling the app when it made the conversion.  I leave the default settings (auto uninstall when finished) and the next message I get is the following:

  "The share specified network '192.168.1.102\ADMIN$' does not exist."

  I checked that I use the good IP and username trying to connect from the Explorer.  When I check the actions on the laptop (administrative tools > computer management), I see that the ADMIN$ is missing.  All I see is a user account and share IPC$.  However, I can't find a way to create the share ADMIN$.  I tried sharing on my C drive and qualifying ADMIN$, but it gives me a message that ADMIN$ is reserved.

  Has anyone ever encountered this message?  I'm looking for even in the right direction to solve / can I change when the converter wants to watch?

  Thanks in advance for any help.

  You can install converter 4.3 on the XP itself - so it should be no problem

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Error Converter Standalone

  Hello

  I have my new in this forum. I have a problem to convert windows 2003 physical server for vmware esx 4.1.0

  I have attached the log files.

  Any Suggesttions?

  RafalP

  You have a DNS resolution problem:

  Unable to connect to esx2.vmware.specjal.com.pl

  André

• Converter Standalone Agent installation failed, error code: 1601

  Hi all

  I downloaded the VMware converter tryware version, to see if we can use this tool to create virtual machines from existing industrial PC.

  We intend to make a test remote backup to a XP to a laptop machine (to keep mobile in an industrial environment)

  I installed you VMware converter and disabled the firewall on both machines.

  I also disabled the network drives that are shared on the remote computer.

  When data powered the remote computer has been entered (ip address, username, PW, BONE family) and press us Next, the pop-up appears to deploy the Agent of Standalone converter.

  If you press 'Yes' to continue, after a minute or two the following message appears:

  -Converter Standalone Agent installation failed, error code: 1601 -.

  Can someone tell me what this error code means and how I can fix this error?

  Any help will be appreciated cincerely!

  Sincere friendships and thank you in advance,

  Marcel Lefèvre

  the Netherlands

  Can someone tell me what this error code means and how I can fix this error?

  Windows Installer error 1601 = The Windows Installer service could not be accessed. Contact your support team to verify that the Windows Installer service is properly registered.

  Additionally, make sure that the appropriate ports are open to allow the Windows agent to settle.

  Alternatively, you can manually install the converter on the remote system agent... and then try to restart the conversion (then there is no need to install anything).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• vCenter converter standalone fails on dell power edge

  I am trying to run VMWare vCenter Converter Standalone v4.0.1 build-161434 on a dell edge server can do a local machine convert on a machine under tension for VMware Workstation - Server 2.x using a local drive. This attempt log file gives:

  Section of VMware vCenter Converter Standalone, pid = 2928, version = version 4.0.1 = build-161434, option = released

  Current working directory: C:\Program VMware vCenter Converter Standalone

  HOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 2.

  HOSTINFO: This machine has 2 physical CPUs, 2 total hearts and 4 logical processors.

  TaskMax = 10, IoMin = 1, IoMax = 21

  Using the libcrypto, version 9070AF

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  Connection to the server on pipeName
  .\pipe\vmware-converter-Server-SOAP.

  SSL:false

  Path: / Converter/sdk

  VMODL version: converter.version.version1

  Don't use DO NOT SSL to connect to the server VMOMI
  .\pipe\vmware-converter-Server-SOAP

  Get the ServiceInstance content

  Yes, we connected to the Converter server.

  Connect to the Converter Server (help to borrow it).

  Server converter created session. (Session ID = "28336B52-D975-4DF1-8E66-2AE6F817098A")

  Connection to the server on pipeName
  .\pipe\vmware-converter-Server-SOAP.

  SSL:false

  Path: / Converter/sdk

  VMODL version: converter.version.version1

  Don't use DO NOT SSL to connect to the server VMOMI
  .\pipe\vmware-converter-Server-SOAP

  Get the ServiceInstance content

  Yes, we connected to the Converter server.

  Connect to the Converter Server (help to borrow it).

  Server converter created session. (Session ID = "F80EA43F-97B4-4D83-82D0-F4A090EA630B")

  SourceSelectPluginModel::BuildFilter 3rd party type not found microsoftVirtualPCVM

  SourceSelectPluginModel::BuildFilter 3rd party type not found parallelsVM

  SourceSelectPluginModel::BuildFilter 3rd party type not found vmwareVCBBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found livestateBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found shadowProtectBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found acronisBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found vmwareVM

  SourceSelectPluginModel::BuildThirdpartyHostedExtVector 3rd party type not found vmwareVM

  Unable to complete the RPC call: invalid state

  Connect to the converter server. (Session ID = "F80EA43F-97B4-4D83-82D0-F4A090EA630B")

  Keep alive signal to: 11:50:27.344 2009-07-11

  Keep alive signal to: 12:00:27.333 2009-07-11

  ConverterImpl::TaskCollectorThread: TimeoutException

  Keep alive signal to: 12:10:27.321 2009-07-11

  PropertyCollector::WaitForUpdates [1]

  {(vmodl.query.PropertyCollector.UpdateSet)

  dynamicType = & lt; unset & gt;

  version = "1"

  }

  Keep alive signal to: 12:20:27.310 2009-07-11

  Keep alive signal to: 12:30:27.298 2009-07-11

  Keep alive signal to: 12:40:27.287 2009-07-11

  ConverterImpl::TaskCollectorThread: TimeoutException

  Keep alive signal to: 12:50:27.275 2009-07-11

  Keep alive signal to: 13:00:27.264 2009-07-11

  Keep alive signal to: 13:10:27.347 2009-07-11

  Keep alive signal to: 13:20:27.364 2009-07-11

  Keep alive signal to: 13:30:27.368 2009-07-11

  Connection to the server on pipeName
  .\pipe\vmware-converter-Server-SOAP.

  SSL:false

  Path: / Converter/sdk

  VMODL version: converter.version.version1

  Don't use DO NOT SSL to connect to the server VMOMI
  .\pipe\vmware-converter-Server-SOAP

  Get the ServiceInstance content

  Yes, we connected to the Converter server.

  Connect to the Converter Server (help to borrow it).

  Server converter created session. (Session ID = "9B3E7712-5B82-47F0-96FB-FEEDC5D50AD6")

  SourceSelectPluginModel::BuildFilter 3rd party type not found microsoftVirtualPCVM

  SourceSelectPluginModel::BuildFilter 3rd party type not found parallelsVM

  SourceSelectPluginModel::BuildFilter 3rd party type not found vmwareVCBBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found livestateBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found shadowProtectBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found acronisBackup

  SourceSelectPluginModel::BuildFilter 3rd party type not found vmwareVM

  SourceSelectPluginModel::BuildThirdpartyHostedExtVector 3rd party type not found vmwareVM

  Keep alive signal to: 13:40:27.357 2009-07-11

  Keep alive signal to: 13:50:27.345 2009-07-11

  Keep alive signal to: 14:00:27.349 2009-07-11

  Unable to complete the RPC call: invalid state

  Connect to the converter server. (Session ID = "9B3E7712-5B82-47F0-96FB-FEEDC5D50AD6")

  Keep alive signal to: 14:10:27.353 2009-07-11

  I'm trying to convert physical machine to virtual - any suggestions would be greatly appreciated.

  gamarion,

  Welcome to the VMware Community Forums!

  The newspaper provided does not contain the information we need.  For your next post, please use the function "Export logs" converter (File Menu, or right-click on a task that failed) and attach it to the post office.

  I saw an error which is very generic during the wizard of converter, on networks, and just before you get to step 3.  It was with a couple Dell 1950 / 2950 s.  This occurs when the converter tries to collect information on the virtual drive of Dell Remote Access Card (DRAC).

  If you open disk management, you will see the device listed as Disk0. You must disable the VSF Dell virtual disk device in Device Manager and restart the server to resolve this problem. You can also disable the virtual floppy drive device of in the DRAC setup at boot time.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Restore-error vCenter Converter Standalone / Server

  Hi guys,.

  It's my first post in the VMware community and I'm looking forward to many useful discussions. Back to my problem...

  I have a serious issue in our virtual environment. Last weekend, I had to restore a virtual machine to a backup vcb. My first idea was to import the machine with the vCenter Converter 4.1.0. So far so good... I chose the .vmx of the virtual machine, which lies directly on the hard disk server vCenter ( file://hostname/e $/vm/vm.vmxUNC path) connection references: domain\administrator (access rights are set correctly)

  After a few seconds, I get the error message: cannot open the file file://hostname/e $/vm/scsi0-0-0-vm.vmdk (the name of the file is of course correctly)... ok, now I'm going to started to sweat... not only for the reason that it was Sunday morning, no, the virtual machine is our production database, and I could not restore it O.o

  Okay, the next idea was to import the machine with the vCenter Converter standalone, that is installed on my workstation. Source type is again Image backup, machine virtual file is always on
  hostname/e$/VM/VM.vmx--... we'll press next... and what past? Error: agent.internal.fault.FileOpenError.summary... have I said already, that the virtual machine is our most important server?

  2 hours later, I finished the installation of the new database server that was not the way things, I want to do...

  Monday: I couldn't believe it, the backup is corrupt... so I copied the files on my local drive on my computer and tried again... what my eyes see? It work fine? Now, I really couldn't believe it... If files is located directly on the vCenter server, it does not work and if the files are on my computer, it works correctly?

  can anyone help my in this matter? I really have no explanation for such a mistake...

  Thanks in advance for your help

  was soon Andi

  PS: I'm sorry for my English, but it is not my native language

  lights,

  There is a KB on a topic like this:

  "DISKLIB-LINK:
  host\e$\vm\scsi0-0-0-VM.VMDK': cannot open (the file is too large).

  Conversion fails when the source or destination do not support large files

  http://KB.VMware.com/kb/1008633/

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• exec: 206: / usr/lib/vmware-vcenter-converter-standalone/converter-gui: not found

  Hello everyone this is my first post!

  I am currently running Ubuntu 8.10 (x86_64) and Converter 4.0 installation has been completed successfully. I'm running into a problem when running command "vmware-converter-client", I get the following error...

  exec: 206: / usr/lib/vmware-vcenter-converter-standalone/converter-gui: not found

  I searched the forum but I can't seem to find anything that refers to this specific error. I've seen other posts that do not include this error, but are usually accompanied by a missing library etc...

  I even tried to run the executable files in the directory/var/lib/vmware-vmware-vcenter-converter-standalone directly, but then, I get the following errors...

  bash:. / vmware converter: no such file or directory

  bash:. / Converter-gui: no such file or directory

  The files are obviousely there!

  ?:|

  You're 64-bit Linux has support on the implementation of the binary 32 bits? All the binary converter are 32-bit

• VMware Vcenter Converter Standalone 5.1

  Bom dia, senhores, gostaria of Saber quem pode me informar wave download o Vmware Vcenter Converter Standalone 5.1, (tem as ser o 5.1) I can not find em canto some POI.

  Desde ja Agradea§o a resposta. Obrigado.

  Converter 5.1.2 supports UEFI, don't worry!

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.

• Windows 2008 R2 VM disk system increased substantially after moving from VM to ESXi host 5.1 to 5.5 ESXi host using vCenter Converter Standalone

  Hello:

  I moved a Windows 2008 R2 VM from a 5.1 ESXi host to an ESXi host 5.5 using vCenter Converter Standalone.  The c: / drive system passed largely to where I now have to extend the volume.  Is this normal/expected behavior?  Perhaps the conversion/move creates temporary files I can delete?

  Thanks much for the ideas.

  This is not the expected behavior.

  Size of the disk is defined during the conversion and which will not increase by its own during conversion.

  Now, you need to V2V, if you want to reduce the volume.