Close() popup does not

Similar Questions

• I upgraded to latest version firefox 29,0 in windows machine 7. All the user interface looks very good. Undo close tab does not work for me. Is that not been addressed?

  Undo Close tab does not work in windows 7 for firefox latest version 29,0

  You can do this via CTRL + SHIFT + T as well.

  You can try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

• Minimize/maximize/close buttons does not...

  Minimize/maximize/close buttons do not work when you run Aero.  Whenever I change my Aero, reduce it and expand buttons work but the close button still does not work.  This happens with all the windows and I'll have to use the Task Manager to close the windows and I have to close the task with the exit button Manager because the close button does not work on either.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O if it works well before?

  Ø summers - get you any error message?

  O have changes made to your computer recently?

  In the meantime, follow the instructions below that may help you resolve the issue.

  Method 1:

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot

  Step 2: Enable half the services

  Step 3: Determine whether the problem returns

  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns

  Step 6: Resolve the problem

  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode.

  Uninstall or update the program that is causing the problem.

  Method 2:

  Windows Live OneCare safety scanner is a free service designed to help ensure the health of your PC.

  • Check and remove viruses
  • Get rid of junk on your hard disk
  • Improve the performance of your PC

  Click on the link below for Online Virus scanner.

  http://safety.live.com/

  Check whether the problem is resolved.

  Method 3:

  Analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• Error popup does not appear when an exception is thrown

  Hello! I m working in an EJB - ADF application. I have a page where I try to delete an entity that is referenced by other entities in the database, so that an ORA-02292 exception is thrown. When this happened, a popup used to be displayed in the application with the error message. This is the behavior I want. However, my isn´t application showing the popup more. When I push the button Delete the exception is thrown and showed in the jdeveloper Journal, but the popup does not appear.
  I Don t remember doing any changes that may be causing this situation. It requires a configuration to make the popup is displayed?
  I m don't know if it was exactly when the problem started, but I ve spent 11.1.1.2 to 11.1.1.3 in the last days.
  
  Thanks in advance.

  Looks like it is related to this problem of model - level exceptions unexercised (EJB, 11.1.1.3)

  Pedja

• App store popup does not close.

  Does not close the pop-up 'Upgrade for os x El Capitan'. It forces me to the app store if I click on it. How can I get rid of him? I am running 10.9.5 on an iMac 2.66 GHz.

  The same window view was on my end 2012 Mini (Server i7) this AM and I first opened the

  App Store, but thought that it won't go away by that alone. There can be no. So I clicked on the button

  in the view of window and he raised point to the App Store of El Capitan. I then read

  through and then rest of the App Store has from here and leave the App Store.

  The notice window went. And I read more than I wanted in the low-score comments

  which have been posted on ElCapitan OS X. My Mini comes with the Mavericks, & is still there.

  No rush to upgrade, since my model has indications (another problem discovered user) when

  updated at ElCapitan regarding material and graphics; This has not been addressed.

  So, if you tried the button in the notice and went to see El Capitan in the App Store, then

  Choose one of the main display options in the App Store before leaving, which can make it go away.

  At least until tomorrow, when you wake up the computer again. Mine is rarely rebooted.

  I hope it will work. Don't know if you need to do anything else that put a piece of

  Black Ribbon on the package insert or create a blind spot in your vision, selectively ignore it.

• Is my site Popup does not work on the Android browser

  I am the owner of a website IE http://www.stdtestingorlando.net . The Web site is using a responsive model. I just installed a popup javascript based on my site. I just noticed that it is works well on desktop computers, but does not appear on the android devices. What could be the problem?

  Mobile browsers have usually a single window, so the idea of a second window to appear has really no sense, or it will end up as another tab.

• Dynamic region ADF in a popup does not load

  Hi Experts,

  Version 11.1.1.5 JDEV

  I have a page that contains a table, and each row has a command link on one of the columns.

  When I click on the link to order an action listener is called who decides the TF DYNAMICS that must be loaded in a pop-.

  Pop has up to a region Dynamics inside adf.

  The file clicked (using the command link)-based workflows are loaded in the dynamic area of the Popup.

  But, when I click on the link even for the second time or another record, that the pop-up is displayed under vacuum, the taskflow in the dynamic region isn't loaded at all. (getDynamicTaskFlowId is called and is also coated the correct TF to load)

  First, it works as expected, but its not the second time.

  I used conditional activation, but later, due to the above question, I tried to put a phrase #{true} for the property current to test if it works. There can be no.

  Please note that first time no problem. It does not work since the second click on the same record or any other document.

  Other suggestions to solve the problem above are very popular.

  Thank you

  Jean Claude

  Hello

  See: decompilation binary ADF: conditionally reset task flow displayed in a Popup

  Frank

• Stripped to show the behavior of the popup does not work on IE 9

  Hello
  I have logic to display popup windows pragmatically, this does not work on IE 9, IE the popup is ever launched in ie - 9. It works fine on all other browsers. (ie8, ie7, Firefox).
  
  Here's the code to render the popup:
  {} public static void showPopup (RichPopup popup, boolean visible)
  try {}
  FacesContext context = FacesContext.getCurrentInstance ();
  If (context! = null & & popup! = null) {}
  String popupId = popup.getClientId (context);
  If (popupId! = null) {}
  Script of StringBuilder = new StringBuilder();
  script. Append ("var popup = AdfPage.PAGE.findComponent('").append (popupId).append("') ;");
  If {(visible)
  script. Append ("if (! popup.isPopupVisible ()) {" "}"). Append ("Popup.Show ()}}") ;
  } else {}
  script. Append ("if (popup.isPopupVisible ()) {" "}"). Append ("Popup.Hide ()}}") ;
  }
  Erks = ExtendedRenderKitService
  Service.getService (context.getRenderKit (),
  ExtendedRenderKitService.class);
  erks.addScript (context, script.toString ());
  }
  }
  } catch (Exception e) {}
  throw new RuntimeException (e);
  }}
  
  
  Please help, I think that the erks.addScript has some problem with ie9.

  Hello.

  I tested the code of nini and it works in 11.1.1.6 and IE9

  but you must add a partialsubmit in the button

• A2, exe close button does not

  I publish to an exe file, and I have a page where I want the user to choose between accepting warning & disagree. Agree is easy, I added a button, the success: continue. With no agreement, I want the project to close, then I looked at the code to make a close button that follows typed in the box of javascript "javascript:window.close(). Now, when I click the button it opens Internet Explorer and then displays the following error message: "Internet Explorer cannot download. Unknown error. »
  
  Then I ran through the forums looking for help & I've changed the code javascript to display "Window.Close ()", then "windows.close ()", and again, same error message and the project still does not close.
  
  What Miss me?
  Thank you.

  Hi B Ellefson

  Are sitting you? I hope so because this one is pretty easy.

  Just click Project > Preferences... > Start and End tab and configure the action for when the film ends as "close project". Then, configure this button "Don't agree" to simply jump to the last slide. You may want to even make this last slide really short of a calendar view. Maybe 1 or more seconds.

  With this approach, your. EXE must close quickly, quietly and regularly.

  See you soon... Rick

• Please advise? My 6s close and does not restart.

  Hi there my iPhone 6s + death randomly on me. It is around the age of 3 months and I had no previous problem with him. Any advice?

  Force restart your iPhone...

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, charge the battery to 100% and then restart. Do not use the iPhone while it is supported. It will load faster.

• using Xp the sd popup does not work on the insertion of the sd chip into the slot, how can it be repaired?

  normally on the insertion of the sd chip a pop-up dialog box appears asking what route you want that information to sd etc. This pop up does not work and the only way I can get into the sd information is to search on D:, then click on 'Open' please notify if MS can restore the pop up facillity?

  Hi JohnWack,

  Welcome to the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  According to the description of the problem, I understand that you do not get the AutoPlay option when you insert the SD chip into the Windows XP computer.

  -What do you mean by "what route you want to than the sd information etc."? Are you referring to the auto play feature?

  Try these methods.

  Method 1

  Double-click on "My Computer", right-click on the drive you want to Auto play and click 'properties '.

  Click the 'Auto play '.

  Method 2

  Steps to enable AutoPlay.

  1. start, click run, type Gpedit.msc in the Open box, and then click OK.
  2. under Computer Configuration, expand models of administration and then click System.
  3. in the settings pane, do a right click Enable Autoplay, and then click Properties.

  For your reference.

  Windows XP does not recognize a secure digital card when you reinsert it after you remove it
  http://support.Microsoft.com/kb/812661

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• events of button inside the popup does not close popup

  Hi all

  I have a requirement to create the popup to enter some lines. So I created integrated popup and I placed the table advanced inside the popup. Also, I placed a button (AddNewRow) with the partial action of fire in table advanced table actions. in the basic PFR page, I wrote for the event AddNewRow event action. Once I click on this button, its perfectly calling event written in base page. But the window closed. How to avoid close the pop up window because I have to do the creation of multiple line inside the popup.

  version: R12.1.3

  Please guide to achieve this.

  Thank you

  SAN

  I achieved this goal by creating a button with partialFireAction event and event action written inside the window popup controller.

• JDev 11.1.1.2.0 - task flow as inline popup does not close

  Hello!
  
  In my project, I've always used new task dialog boxes flow, opening in a separate window. Now, in this new version of jdev theres' a magical usage option Popup inline instead of separate Bowser window. It is very impressive. BUT when I switched to this topic - I discovered that these windows pop up online remains visible even when the flow of the task ends. Y at - it another magical option that closed the popup when the return activity workflow is reached?
  
  Thank you!

  Hello

  the use case works for me for external dialogue window, as well as for external dialogue using an inline popup window. So I don't know what the problem is that meet you. The URL in the external window cannot be removed because the request is a GET request.

  Frank

• How can I remove PC Cleaner Pro when a popup does not close?

  A program called PC Cleaner Pro downloaded it on my Vista Home Premium computer. I tried to uninstall, but a pop-up window appears asking me if I really want to uninstall it, but it is impossible to answer, or to remove the pop up. How can I uninstall this program?

  The procedure described here might work:

  http://www.bleepingcomputer.com/forums/topic444836.html