cluster management: selective update of values
Hi all
I have a VI work, but I'm convinced it's not exactly good code. However I don't know how to do better.
the task is to replace some values in a group of old data with new data, according to a user in the form of Boolean values for each value input.
do not hurt me to encode this
the bottom is: these are the correction values for a continuous flow of data, in oder to correct dynamic offset gauges. This VI belongs to a higher level while loop.
Thank you for your ideas!
In situations like this, oftne I like to use a loop FOR. AutoIndex on a string array and using a structure dealing with wired Terminal selection to the chain. Now you can ungroup one thing at a time, if you decide to update, and only update it if necessary. I find it easier to understand and it takes much less space.
Note: In the case of FALSE, I'm just the 'current' gauging straight wiring. If the shift register is always the last cluster and we update only if necessary.
Tags: NI Software
Similar Questions
-
Checkbox validation based on the selection of the values LOV
I'm trying to validate a checkbox custom on the opportunity page, based on the selection of the values LOV.
For example only when the user selects 'rating = A', the box should be able to select and save.
If the user selects other that 'A' in the field assessment, the box should not save.
or
Is it possible to do, the READ ONLY checkbox, enable only when the side 'A' is selected.
Any thoughts / help on this.
Thank you, Kumar
Edited by: user10833334 may 4, 2010 06:43There is no function to make a read-only field based on the contents of another field, it is not an option. I will list my thoughts on how you might handle this below.
-Option 1: I recommend that you use validation to manage it. I don't know exactly to your needs, but you could write a field validation that checks to see if the flag is checked and rating <>has and sends an error message to the user, if it is not. The user would not be able to save the file until it Unchecks the box or sets the side = A.
Advantages: User gets a message explaining the problem with the data and is forced to fix it before you save it.
Cons: Requires interaction from the user to save and if they do not pay attention, the data may be lost if they cancelled without saving the changes.-Option 2: Another option would be to use the workflow to validate the registration. In this scenario, you can create a workflow that determines whether the field is out of adjustment, and if it is not correctly set, the workflow would update the box accordingly. In this scenario, you would use the 'Actions if Condition is False' also to inform the user that the flag cannot be controlled unless the side =. Then, you must set the Action "Update the values" update the uncontrolled field.
Pros: Manages the work without user interaction.
Cons: The con in this case, is that there is no workflow 'Before NEW record saved' trigger, so it is likely that the user sets the value incorrectly when creating the folder and it would stay like that until they update the record again.Some people might argue that there is another option that uses the functionality of dynamic page layout to make the field read-only, but this isn't a good option. You would need to convert using the Type of the opportunity in a way that would make use of the possibilities of lourdes for your users and I mention it only to you recommend to avoid his review completely.
Good luck and let me know if you have any questions.
Thom -
Remove or delete an update of "select updates to install.
I had an answer about the failure of automatic loading of an update to select updates to install. I finished the instructions and the update was successful. However, the update is still listed in select updates to install and continues to install and fail. How can I remove this update to select updates to install. There is no option to delete or remove it. The index update is "Updated for the management of rights for Windows Vista (KB979099) Client".
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista at the link above.
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
update the value of the column to the next value
Hi all
create table xxc_test (date of from_date, to_date date, amount, number incr_amount);
Select 2014, 2015, 3000, the double null
If suppose if input data in the incr_amount then let say 1000 I want to update the value with incr_amount column amount
Select 2014, 2015, 4,000 of the double
If not even though it is as
Select 2014, 2015, 3000, the double null
and must be updated to the year
Note: I spend the year, amount,incr_amount manually (run-time)
Post edited by: Rajesh123 Note added in the subect
Hello
: new.incr_amount: = 0; also use it in code.
The condition " If : new.incr_amoun is > 0" then (sure fire or change the value only if the increment is positive. ).
,....
..
end if;
-Thank you
Pavan Kumar N
-
Oracle apex 5.0: not update the values in the Collection.
Hello again,
I have a problem in IR where content comes from the collection query.
Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com
testdump/developer/Office
All of the Suggestions!
Thank you
Pranav.
Pranav.Shah wrote:
I have a problem in IR where content comes from the collection query.
Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com
testdump/developer/Office
The "coll update" process fails with a ORA-01403: no data found error. This happens in line 11 because of the access attempt to the
wwv_flow.g_f01
using the variable array subscriptc
who has been incremented beyond the size of the table, which is now smaller because of the IR filter applied.begin declare c pls_integer := 0; begin for c1 in ( select seq_id,c001 from apex_collections where collection_name = 'MATRIX2' ) loop c:=c+1; apex_debug.message(c); apex_collection.update_member_attribute (p_collection_name=> 'MATRIX2', p_seq=> c1.seq_id,p_attr_number =>'2',p_attr_value=>wwv_flow.g_f01(c)); end loop; end; end;
I agree with fondant tabular forms on interactive reports, but you can meet your requirement as follows. In your application, see page 2.
1 Add a column of form element hidden IR containing the sequence number of collection:
select c001 col1 , apex_item.text(2, c002) col2 , apex_item.hidden(1, seq_id) seq from apex_collections where collection_name = 'MATRIX2'
2 place the question of the hidden form in the report using the COL1 Expression HTML attribute:
#COL1##SEQ#
3. change submit to the process if it is driven by the subject table, not the existing collection:
begin for i in 1..apex_application.g_f01.count loop apex_collection.update_member_attribute( p_collection_name=> 'MATRIX2' , p_seq=> apex_application.g_f01(i) , p_attr_number => '2' , p_attr_value=> apex_application.g_f02(i)); end loop; end;
-
How to update the value of a value in a table
APEX - 4.1.0.00.32
Version of DB - 10 g
Web - OHS server architecture
Browser - IE8
Theme - 9
Hello
I have a tabular form and I want to update the value of a field using a process based on an add-on.
the name of the column in the form of tables is (name of column P22_PROJECT_ID)
The error I get is
ERR-1002 unable to find point item ID 'P22_PROJECT_ID' in the application "103".
Error unexpected, unable to find the name of the option at the page or application level.
The field is questioned as
Select pt.project_id P22_PROJECT_ID
The code I'm trying to use in the process is
: P22_PROJECT_ID: =: P10_PROJECT_ID;
I also tried without the colon (P22_PROJECT_ID), but the application does not recognize.
Any help would be appreciated.
Thank youthe tables for is on page 22?
the project in page 10I think you go to page 22 page 10
Create a new item in page 22 as p22_project_id
Since 10 passes as a parameter the page p1o_project_id and set p22_project_idby default as p22_project_id
-
Update the value Table B if table A the value of different
Hi all
I'm using Toad for Oracle and need assistance with a trigger. I have two tables tables A and B Table with some of the same fields. I want to only update the values in the array B, if the values in table A are not equal values in table B table A update. Don't update the record where the primary key of the Table equal to the foreign key in the Table B. I have a sample script below, I hope someone can give me an example, I can develop and test. Thanks for reading also.
Published by: Nikki on December 6, 2011 07:50CREATE OR REPLACE TRIGGER AU_Table_A AFTER UPDATE ON Table_A FOR EACH ROW BEGIN If Table A :old.value != Table A :new.value then update --Update Table B value with Table A updated value Table B :old.value = Table A :new.value where Table A primary key = Table B foreign key ............ END IF; END;
Hi Nikki,
If I understand correctly, then maybe
create or replace trigger au_table_a after update on table_a for each row when (old.value != new.value) begin update table_b set table_b.value = :new.value where table_b.foreign_key = :new.primary_key and table_b.value != :new.value; end au_table_a; /
Note that the solution is not trying to handle NULL values. If you have NULL in to either A or B, we have to manage those specifically
Concerning
Peter -
Statement of "SELECT UPDATES" of the audit
Hi all
My database is 10.2.0.3 and I activated audit_trail DB value already.
My goal I want to audit statement "SELECT UPDATES" on the table and tried to activate "SELECT" audit on the table that has the number of records in dba_audit_trail, because the "SELECT statement" that include in this review and then I tried to activate "TABLE of LOCKING" of the audit on the table that does not dba_audit_trail n records.
So my question is how to enable auditing of collecting only the instruction "Select updates"? or someone has an idea for this.
Kind regards
HikoI don't think that it is possible to SELECT UPDATES verification without verification of all SELECT statements.
What is the problem you are trying to solve in auditing SELECT for UPDATE statements? If you try to solve a problem of line lock contention, for example, you would be better served by looking at the data of ASHES (assuming that the appropriate licenses) to get information on what sessions were blocking other sessions over time.
If you really want to just audit records to SELECT for UPDATE statements, you may audit all selects them and then run a job that regularly purged audit records that were not SELECT them for updates. Or, assuming you are using FGA, you could get the current SQL from the USERENV context and analyze in the search of the FOR UPDATE clause before writing the audit record in your audit table.
Justin
-
There is NO selection update software on my phone! How are Iphone 3 # IOS updated?
It may not be this difficult OR the answer is "It cannot be upgraded" - which is?
The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.
-
I have Windows 7 on my laptop (which is 5 years, cannot afford a new).
I don't want Windows 10... But it does not close on the upgrade and it's affecting my updates. I'm going to "Updates" and it says "upgrade to Windows 10" then the "Get started" button in the right corner. "
But what is frustrating so it won't let me update the selected updates.
Until Windows Update would tell me "an important update" and or "optional" update Then I would choose which clicking on the box. Well now, I go to updates and the stupid thing of 10 window, then "other updates show." I click on it and choose my updates and click on 'OK '.
That's the frustrating part. When I come back there is nothing that says... as it used to... "Install updates". I've tried everything. If the updates, I chose are just sitting there.
Today is May 13, 2016 and yesterday (12) when laptop computer closing it are there upgrades then... But... when I went to see if the updates, I chose were installed were not. On the contrary, he says this (I have updates in bold):
'Select the updates you want to install' (once again, I've done)
Upgrade to Windows Home version 1511 10, 10586
Update for Windows 7 for x 64-based systems (KB3140245)
Download size: 627 KB
You may have to restart your computer for this update is taken into account.
Update type: Optional
Install this update to resolve problems in Windows. For a complete list of issues included in this update, see the Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.
More information:
http://support.Microsoft.com/kb/3140245Help and Support:
http://support.Microsoft.comI do community then what to do? And still now I don't want to upgrade to 10... I have my reasons.
Everything you need is here to do everything for you
GWX Panel
http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html
The download is on this link
-
Adobe Application Manager - some updates could not be installed
I just rebuilt my OS (Windows Home 64-bit 10) and reloaded my installation CD PS5. When I went to check the updates (there should be some new!), they showed me that there are updates for each product in the suite. I said to update App Manager took about 5 minutes and I was told that none of the updates could be downloaded. ("There was an error downloading this update. Quit and try again later. ") After 4 hours of this, still no luck. I use Kaspersky and I tried with UAC on and outside.
What Miss me? Is there something in the firewall of Kaspersky I need to address? (I can't find anything, but that doesn't mean no it isn't something here.) Anyone have any ideas?
If you install latest Adobe Application Manager, more updates should complete.
Adobe - Adobe Application Manager: for Windows: Adobe Application Manager
-
Help! Try to update the values of Member - but does not (completely).
We are trying to resolve a calculation in the middle of the update of business cycle. There is a push to update existing values for an account specific forecast time scenario.
Essentially, we want to update the value of forecast current account 56400 to 0.33 * ("56100" + "56110" + "56300" + "56310" + "56320").
The solution is to make sure only rest of the current year, Apr - Dec, updated forecasts to date.
Currently the rule runs, but handful of values is never get updates - I'm not doing correctly?
relatively small cube BSO, Account (dense).
Here is the rule of this task running
SET CACHE HIGH;
FIX (& those 'Forecasts', 'the current iteration","F_00000");
"56400")
IF (@ISMBR (& NextMonth: "Dec"));
0.33 * ("56100" + "56110" + "56300" + "56310" + "56320");
ENDIF ;)
ENDFIX;
-followed by a calc all
I expect to update all occurrences 56400 in the fix above...
Thanks in advance!
Himanshu-
You probably need...
UPDATECALC OFF SET;
.. Smart calc or .in there will prevent 'own' blocks to be recalculated.
-
Greetings
I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.
The Contact Sheet function was working well, until I ran the updates.
I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for. I thank any help or give advice on how to fix this...
Help, please!
Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II. A version of plug-ins from third parties have been known to break Photoshop Scrippting.
-
How can I get the color picker to select the hexadecimal value by default?
Hello world!
I've upgraded to Photoshop CC 2015, and now when the color picker appears, it selects only the value of C (cynan) by default, which is useless. How can I move it back so the Hex value is selected by default?
Thanks in advance for any help!
Ah! I have it. If I open a new file and select the CMYK mode, C is highlighted.
If I open a new file and select RGB, I get the Hex field highlighted.
Gene
-
Hi everyone, this should be so easy, and yet I'm stuck.
I have a form with a P110_VESSEL_ID element. This article is a list of selection. It is based on the query:
Select distinct v.vessel_name, v.vessel_id
of ships v, frequent_fishermen ff
where ff.dea_permit_id =: G_PERMIT_ID and
FF:vessel_id = v.vessel_id
UNION
Select v.vessel_name, v.vessel_id
of apex_collections v, vessels
where collection_name = "SUPVES_COLLECTION" and
a.C002 = v.vessel_id
If the user decides from the values in the selection list query, they can opt to SELECT all THE VALUES. This SELECT all VALUES is a TEXT of ITEM POST on P110_VESSEL_ID.
< a id = "popVessels" href = "#" > < font color = blue > select all < /a > ships
It all works very well.
The problem is that when the user selects a boat name = "UNKNOWN" and it is corresponding to the value of vessel_id, I want an ALERT to appear indicating that they should check that the boat is UNKNOWN and no one's any ship.
I created a dynamic action
event = change
Select type = item
Item = P110_VESSEL_ID
Real ACtion #1 is the ALERT.
Currently, I have no other logic, but can't even get this working. All thoughts. I also tried the SELECT TYPE = jQuery Selector = select [name = "P110_VESSEL_ID"], but that does not work either (although I am not sure if the value must be P110_VESSEL_ID or static VESSEL_ID name).
Any help is appreciated.
PS. the page is not submitted when the ship is changed. There are other data that should be in this region and others and many validations run when submit to submit would not be an option.
Thanks again,
Karen
Is (BOAT = UNKNOWN) a single value with a single vessel_id? If Yes and for example if the vessel_id is 99, then proceed as follows:
Add an expression "JavaScript" in your dynamic action.
In the Condition value, enter:
this.triggeringElement.value == "99"
-Jeff
And I agree with Nicolette, there is something wrong with some other DA who is at the origin of the DAs after that does not work.
Maybe you are looking for
-
Opt out of the beta program (gene software update)
Hello. I participated and enjoyed the public beta of macOS 10.12 Sierra program, but now that the commercial version became available I would go instead to the mainline. This morning a public beta of 10.12.1 appeared in the software update. Then I we
-
I can't close or delete the file, the button disappeared
Since I updated to Firefox, at the top of the page where it says FILE, EDIT, VIEW, HISTORY, etc. under the button FILE, the close button is gone & in order to close or delete a file, I have to LEAVE my computer. His TERRIBLE...
-
Is there a Build-in microphone Satellite Pro P100?
can not find... pls I want to know how to turn it on?
-
When you copy a file in the same folder, is it possible to choose where "copy of" add original file name? Someone has an idea?
-
HPDM 4.6 supported for Windows 8.1
Recently, I migrated to windows 8.1 and noticed that I can't install the HP device on my System Management Console. I get an error message of not having enough permissions to write to the configuration of the locale. Language Setting Preparing for wr